diff options
36 files changed, 1941 insertions, 318 deletions
diff --git a/Documentation/target/tcmu-design.txt b/Documentation/target/tcmu-design.txt new file mode 100644 index 000000000000..5518465290bf --- /dev/null +++ b/Documentation/target/tcmu-design.txt @@ -0,0 +1,378 @@ +Contents: + +1) TCM Userspace Design + a) Background + b) Benefits + c) Design constraints + d) Implementation overview + i. Mailbox + ii. Command ring + iii. Data Area + e) Device discovery + f) Device events + g) Other contingencies +2) Writing a user pass-through handler + a) Discovering and configuring TCMU uio devices + b) Waiting for events on the device(s) + c) Managing the command ring +3) Command filtering and pass_level +4) A final note + + +TCM Userspace Design +-------------------- + +TCM is another name for LIO, an in-kernel iSCSI target (server). +Existing TCM targets run in the kernel. TCMU (TCM in Userspace) +allows userspace programs to be written which act as iSCSI targets. +This document describes the design. + +The existing kernel provides modules for different SCSI transport +protocols. TCM also modularizes the data storage. There are existing +modules for file, block device, RAM or using another SCSI device as +storage. These are called "backstores" or "storage engines". These +built-in modules are implemented entirely as kernel code. + +Background: + +In addition to modularizing the transport protocol used for carrying +SCSI commands ("fabrics"), the Linux kernel target, LIO, also modularizes +the actual data storage as well. These are referred to as "backstores" +or "storage engines". The target comes with backstores that allow a +file, a block device, RAM, or another SCSI device to be used for the +local storage needed for the exported SCSI LUN. Like the rest of LIO, +these are implemented entirely as kernel code. + +These backstores cover the most common use cases, but not all. One new +use case that other non-kernel target solutions, such as tgt, are able +to support is using Gluster's GLFS or Ceph's RBD as a backstore. The +target then serves as a translator, allowing initiators to store data +in these non-traditional networked storage systems, while still only +using standard protocols themselves. + +If the target is a userspace process, supporting these is easy. tgt, +for example, needs only a small adapter module for each, because the +modules just use the available userspace libraries for RBD and GLFS. + +Adding support for these backstores in LIO is considerably more +difficult, because LIO is entirely kernel code. Instead of undertaking +the significant work to port the GLFS or RBD APIs and protocols to the +kernel, another approach is to create a userspace pass-through +backstore for LIO, "TCMU". + + +Benefits: + +In addition to allowing relatively easy support for RBD and GLFS, TCMU +will also allow easier development of new backstores. TCMU combines +with the LIO loopback fabric to become something similar to FUSE +(Filesystem in Userspace), but at the SCSI layer instead of the +filesystem layer. A SUSE, if you will. + +The disadvantage is there are more distinct components to configure, and +potentially to malfunction. This is unavoidable, but hopefully not +fatal if we're careful to keep things as simple as possible. + +Design constraints: + +- Good performance: high throughput, low latency +- Cleanly handle if userspace: + 1) never attaches + 2) hangs + 3) dies + 4) misbehaves +- Allow future flexibility in user & kernel implementations +- Be reasonably memory-efficient +- Simple to configure & run +- Simple to write a userspace backend + + +Implementation overview: + +The core of the TCMU interface is a memory region that is shared +between kernel and userspace. Within this region is: a control area +(mailbox); a lockless producer/consumer circular buffer for commands +to be passed up, and status returned; and an in/out data buffer area. + +TCMU uses the pre-existing UIO subsystem. UIO allows device driver +development in userspace, and this is conceptually very close to the +TCMU use case, except instead of a physical device, TCMU implements a +memory-mapped layout designed for SCSI commands. Using UIO also +benefits TCMU by handling device introspection (e.g. a way for +userspace to determine how large the shared region is) and signaling +mechanisms in both directions. + +There are no embedded pointers in the memory region. Everything is +expressed as an offset from the region's starting address. This allows +the ring to still work if the user process dies and is restarted with +the region mapped at a different virtual address. + +See target_core_user.h for the struct definitions. + +The Mailbox: + +The mailbox is always at the start of the shared memory region, and +contains a version, details about the starting offset and size of the +command ring, and head and tail pointers to be used by the kernel and +userspace (respectively) to put commands on the ring, and indicate +when the commands are completed. + +version - 1 (userspace should abort if otherwise) +flags - none yet defined. +cmdr_off - The offset of the start of the command ring from the start +of the memory region, to account for the mailbox size. +cmdr_size - The size of the command ring. This does *not* need to be a +power of two. +cmd_head - Modified by the kernel to indicate when a command has been +placed on the ring. +cmd_tail - Modified by userspace to indicate when it has completed +processing of a command. + +The Command Ring: + +Commands are placed on the ring by the kernel incrementing +mailbox.cmd_head by the size of the command, modulo cmdr_size, and +then signaling userspace via uio_event_notify(). Once the command is +completed, userspace updates mailbox.cmd_tail in the same way and +signals the kernel via a 4-byte write(). When cmd_head equals +cmd_tail, the ring is empty -- no commands are currently waiting to be +processed by userspace. + +TCMU commands start with a common header containing "len_op", a 32-bit +value that stores the length, as well as the opcode in the lowest +unused bits. Currently only two opcodes are defined, TCMU_OP_PAD and +TCMU_OP_CMD. When userspace encounters a command with PAD opcode, it +should skip ahead by the bytes in "length". (The kernel inserts PAD +entries to ensure each CMD entry fits contigously into the circular +buffer.) + +When userspace handles a CMD, it finds the SCSI CDB (Command Data +Block) via tcmu_cmd_entry.req.cdb_off. This is an offset from the +start of the overall shared memory region, not the entry. The data +in/out buffers are accessible via tht req.iov[] array. Note that +each iov.iov_base is also an offset from the start of the region. + +TCMU currently does not support BIDI operations. + +When completing a command, userspace sets rsp.scsi_status, and +rsp.sense_buffer if necessary. Userspace then increments +mailbox.cmd_tail by entry.hdr.length (mod cmdr_size) and signals the +kernel via the UIO method, a 4-byte write to the file descriptor. + +The Data Area: + +This is shared-memory space after the command ring. The organization +of this area is not defined in the TCMU interface, and userspace +should access only the parts referenced by pending iovs. + + +Device Discovery: + +Other devices may be using UIO besides TCMU. Unrelated user processes +may also be handling different sets of TCMU devices. TCMU userspace +processes must find their devices by scanning sysfs +class/uio/uio*/name. For TCMU devices, these names will be of the +format: + +tcm-user/<hba_num>/<device_name>/<subtype>/<path> + +where "tcm-user" is common for all TCMU-backed UIO devices. <hba_num> +and <device_name> allow userspace to find the device's path in the +kernel target's configfs tree. Assuming the usual mount point, it is +found at: + +/sys/kernel/config/target/core/user_<hba_num>/<device_name> + +This location contains attributes such as "hw_block_size", that +userspace needs to know for correct operation. + +<subtype> will be a userspace-process-unique string to identify the +TCMU device as expecting to be backed by a certain handler, and <path> +will be an additional handler-specific string for the user process to +configure the device, if needed. The name cannot contain ':', due to +LIO limitations. + +For all devices so discovered, the user handler opens /dev/uioX and +calls mmap(): + +mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0) + +where size must be equal to the value read from +/sys/class/uio/uioX/maps/map0/size. + + +Device Events: + +If a new device is added or removed, a notification will be broadcast +over netlink, using a generic netlink family name of "TCM-USER" and a +multicast group named "config". This will include the UIO name as +described in the previous section, as well as the UIO minor +number. This should allow userspace to identify both the UIO device and +the LIO device, so that after determining the device is supported +(based on subtype) it can take the appropriate action. + + +Other contingencies: + +Userspace handler process never attaches: + +- TCMU will post commands, and then abort them after a timeout period + (30 seconds.) + +Userspace handler process is killed: + +- It is still possible to restart and re-connect to TCMU + devices. Command ring is preserved. However, after the timeout period, + the kernel will abort pending tasks. + +Userspace handler process hangs: + +- The kernel will abort pending tasks after a timeout period. + +Userspace handler process is malicious: + +- The process can trivially break the handling of devices it controls, + but should not be able to access kernel memory outside its shared + memory areas. + + +Writing a user pass-through handler (with example code) +------------------------------------------------------- + +A user process handing a TCMU device must support the following: + +a) Discovering and configuring TCMU uio devices +b) Waiting for events on the device(s) +c) Managing the command ring: Parsing operations and commands, + performing work as needed, setting response fields (scsi_status and + possibly sense_buffer), updating cmd_tail, and notifying the kernel + that work has been finished + +First, consider instead writing a plugin for tcmu-runner. tcmu-runner +implements all of this, and provides a higher-level API for plugin +authors. + +TCMU is designed so that multiple unrelated processes can manage TCMU +devices separately. All handlers should make sure to only open their +devices, based opon a known subtype string. + +a) Discovering and configuring TCMU UIO devices: + +(error checking omitted for brevity) + +int fd, dev_fd; +char buf[256]; +unsigned long long map_len; +void *map; + +fd = open("/sys/class/uio/uio0/name", O_RDONLY); +ret = read(fd, buf, sizeof(buf)); +close(fd); +buf[ret-1] = '\0'; /* null-terminate and chop off the \n */ + +/* we only want uio devices whose name is a format we expect */ +if (strncmp(buf, "tcm-user", 8)) + exit(-1); + +/* Further checking for subtype also needed here */ + +fd = open(/sys/class/uio/%s/maps/map0/size, O_RDONLY); +ret = read(fd, buf, sizeof(buf)); +close(fd); +str_buf[ret-1] = '\0'; /* null-terminate and chop off the \n */ + +map_len = strtoull(buf, NULL, 0); + +dev_fd = open("/dev/uio0", O_RDWR); +map = mmap(NULL, map_len, PROT_READ|PROT_WRITE, MAP_SHARED, dev_fd, 0); + + +b) Waiting for events on the device(s) + +while (1) { + char buf[4]; + + int ret = read(dev_fd, buf, 4); /* will block */ + + handle_device_events(dev_fd, map); +} + + +c) Managing the command ring + +#include <linux/target_core_user.h> + +int handle_device_events(int fd, void *map) +{ + struct tcmu_mailbox *mb = map; + struct tcmu_cmd_entry *ent = (void *) mb + mb->cmdr_off + mb->cmd_tail; + int did_some_work = 0; + + /* Process events from cmd ring until we catch up with cmd_head */ + while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) { + + if (tcmu_hdr_get_op(&ent->hdr) == TCMU_OP_CMD) { + uint8_t *cdb = (void *)mb + ent->req.cdb_off; + bool success = true; + + /* Handle command here. */ + printf("SCSI opcode: 0x%x\n", cdb[0]); + + /* Set response fields */ + if (success) + ent->rsp.scsi_status = SCSI_NO_SENSE; + else { + /* Also fill in rsp->sense_buffer here */ + ent->rsp.scsi_status = SCSI_CHECK_CONDITION; + } + } + else { + /* Do nothing for PAD entries */ + } + + /* update cmd_tail */ + mb->cmd_tail = (mb->cmd_tail + tcmu_hdr_get_len(&ent->hdr)) % mb->cmdr_size; + ent = (void *) mb + mb->cmdr_off + mb->cmd_tail; + did_some_work = 1; + } + + /* Notify the kernel that work has been finished */ + if (did_some_work) { + uint32_t buf = 0; + + write(fd, &buf, 4); + } + + return 0; +} + + +Command filtering and pass_level +-------------------------------- + +TCMU supports a "pass_level" option with valid values of 0 or 1. When +the value is 0 (the default), nearly all SCSI commands received for +the device are passed through to the handler. This allows maximum +flexibility but increases the amount of code required by the handler, +to support all mandatory SCSI commands. If pass_level is set to 1, +then only IO-related commands are presented, and the rest are handled +by LIO's in-kernel command emulation. The commands presented at level +1 include all versions of: + +READ +WRITE +WRITE_VERIFY +XDWRITEREAD +WRITE_SAME +COMPARE_AND_WRITE +SYNCHRONIZE_CACHE +UNMAP + + +A final note +------------ + +Please be careful to return codes as defined by the SCSI +specifications. These are different than some values defined in the +scsi/scsi.h include file. For example, CHECK CONDITION's status code +is 2, not 1. diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index 0bea5776bcbc..3effa931fce2 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -2185,7 +2185,7 @@ isert_put_response(struct iscsi_conn *conn, struct iscsi_cmd *cmd) isert_cmd->tx_desc.num_sge = 2; } - isert_init_send_wr(isert_conn, isert_cmd, send_wr, true); + isert_init_send_wr(isert_conn, isert_cmd, send_wr, false); pr_debug("Posting SCSI Response IB_WR_SEND >>>>>>>>>>>>>>>>>>>>>>\n"); @@ -2871,7 +2871,7 @@ isert_put_datain(struct iscsi_conn *conn, struct iscsi_cmd *cmd) &isert_cmd->tx_desc.iscsi_header); isert_init_tx_hdrs(isert_conn, &isert_cmd->tx_desc); isert_init_send_wr(isert_conn, isert_cmd, - &isert_cmd->tx_desc.send_wr, true); + &isert_cmd->tx_desc.send_wr, false); isert_cmd->rdma_wr.s_send_wr.next = &isert_cmd->tx_desc.send_wr; wr->send_wr_num += 1; } @@ -3140,7 +3140,7 @@ isert_accept_np(struct iscsi_np *np, struct iscsi_conn *conn) accept_wait: ret = down_interruptible(&isert_np->np_sem); - if (max_accept > 5) + if (ret || max_accept > 5) return -ENODEV; spin_lock_bh(&np->np_thread_lock); diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 829752cfd73f..a902fa1db7af 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -112,6 +112,7 @@ static void qlt_abort_cmd_on_host_reset(struct scsi_qla_host *vha, struct qla_tgt_cmd *cmd); static void qlt_alloc_qfull_cmd(struct scsi_qla_host *vha, struct atio_from_isp *atio, uint16_t status, int qfull); +static void qlt_disable_vha(struct scsi_qla_host *vha); /* * Global Variables */ @@ -210,7 +211,7 @@ static inline void qlt_decr_num_pend_cmds(struct scsi_qla_host *vha) spin_unlock_irqrestore(&vha->hw->tgt.q_full_lock, flags); } -void qlt_24xx_atio_pkt_all_vps(struct scsi_qla_host *vha, +static void qlt_24xx_atio_pkt_all_vps(struct scsi_qla_host *vha, struct atio_from_isp *atio) { ql_dbg(ql_dbg_tgt, vha, 0xe072, @@ -433,7 +434,7 @@ static int qlt_reset(struct scsi_qla_host *vha, void *iocb, int mcmd) #if 0 /* FIXME: Re-enable Global event handling.. */ /* Global event */ atomic_inc(&ha->tgt.qla_tgt->tgt_global_resets_count); - qlt_clear_tgt_db(ha->tgt.qla_tgt, 1); + qlt_clear_tgt_db(ha->tgt.qla_tgt); if (!list_empty(&ha->tgt.qla_tgt->sess_list)) { sess = list_entry(ha->tgt.qla_tgt->sess_list.next, typeof(*sess), sess_list_entry); @@ -515,7 +516,7 @@ static void qlt_schedule_sess_for_deletion(struct qla_tgt_sess *sess, } /* ha->hardware_lock supposed to be held on entry */ -static void qlt_clear_tgt_db(struct qla_tgt *tgt, bool local_only) +static void qlt_clear_tgt_db(struct qla_tgt *tgt) { struct qla_tgt_sess *sess; @@ -867,7 +868,7 @@ int qlt_stop_phase1(struct qla_tgt *tgt) mutex_lock(&vha->vha_tgt.tgt_mutex); spin_lock_irqsave(&ha->hardware_lock, flags); tgt->tgt_stop = 1; - qlt_clear_tgt_db(tgt, true); + qlt_clear_tgt_db(tgt); spin_unlock_irqrestore(&ha->hardware_lock, flags); mutex_unlock(&vha->vha_tgt.tgt_mutex); mutex_unlock(&qla_tgt_mutex); @@ -1462,12 +1463,13 @@ out_err: return -1; } -static inline void qlt_unmap_sg(struct scsi_qla_host *vha, - struct qla_tgt_cmd *cmd) +static void qlt_unmap_sg(struct scsi_qla_host *vha, struct qla_tgt_cmd *cmd) { struct qla_hw_data *ha = vha->hw; - BUG_ON(!cmd->sg_mapped); + if (!cmd->sg_mapped) + return; + pci_unmap_sg(ha->pdev, cmd->sg, cmd->sg_cnt, cmd->dma_data_direction); cmd->sg_mapped = 0; @@ -2428,8 +2430,7 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type, return 0; out_unmap_unlock: - if (cmd->sg_mapped) - qlt_unmap_sg(vha, cmd); + qlt_unmap_sg(vha, cmd); spin_unlock_irqrestore(&ha->hardware_lock, flags); return res; @@ -2506,8 +2507,7 @@ int qlt_rdy_to_xfer(struct qla_tgt_cmd *cmd) return res; out_unlock_free_unmap: - if (cmd->sg_mapped) - qlt_unmap_sg(vha, cmd); + qlt_unmap_sg(vha, cmd); spin_unlock_irqrestore(&ha->hardware_lock, flags); return res; @@ -2741,8 +2741,7 @@ done: if (!ha_locked && !in_interrupt()) msleep(250); /* just in case */ - if (cmd->sg_mapped) - qlt_unmap_sg(vha, cmd); + qlt_unmap_sg(vha, cmd); vha->hw->tgt.tgt_ops->free_cmd(cmd); } return; @@ -3087,8 +3086,7 @@ static void qlt_do_ctio_completion(struct scsi_qla_host *vha, uint32_t handle, tfo = se_cmd->se_tfo; cmd->cmd_sent_to_fw = 0; - if (cmd->sg_mapped) - qlt_unmap_sg(vha, cmd); + qlt_unmap_sg(vha, cmd); if (unlikely(status != CTIO_SUCCESS)) { switch (status & 0xFFFF) { @@ -5343,7 +5341,7 @@ void qlt_lport_deregister(struct scsi_qla_host *vha) EXPORT_SYMBOL(qlt_lport_deregister); /* Must be called under HW lock */ -void qlt_set_mode(struct scsi_qla_host *vha) +static void qlt_set_mode(struct scsi_qla_host *vha) { struct qla_hw_data *ha = vha->hw; @@ -5364,7 +5362,7 @@ void qlt_set_mode(struct scsi_qla_host *vha) } /* Must be called under HW lock */ -void qlt_clear_mode(struct scsi_qla_host *vha) +static void qlt_clear_mode(struct scsi_qla_host *vha) { struct qla_hw_data *ha = vha->hw; @@ -5428,8 +5426,7 @@ EXPORT_SYMBOL(qlt_enable_vha); * * Disable Target Mode and reset the adapter */ -void -qlt_disable_vha(struct scsi_qla_host *vha) +static void qlt_disable_vha(struct scsi_qla_host *vha) { struct qla_hw_data *ha = vha->hw; struct qla_tgt *tgt = vha->vha_tgt.qla_tgt; diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index 8ff330f7d6f5..332086776dfe 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -1001,11 +1001,11 @@ struct qla_tgt_prm { struct qla_tgt *tgt; void *pkt; struct scatterlist *sg; /* cmd data buffer SG vector */ + unsigned char *sense_buffer; int seg_cnt; int req_cnt; uint16_t rq_result; uint16_t scsi_status; - unsigned char *sense_buffer; int sense_buffer_len; int residual; int add_status_pkt; @@ -1033,10 +1033,6 @@ struct qla_tgt_srr_ctio { extern struct qla_tgt_data qla_target; -/* - * Internal function prototypes - */ -void qlt_disable_vha(struct scsi_qla_host *); /* * Function prototypes for qla_target.c logic used by qla2xxx LLD code. @@ -1049,8 +1045,6 @@ extern void qlt_lport_deregister(struct scsi_qla_host *); extern void qlt_unreg_sess(struct qla_tgt_sess *); extern void qlt_fc_port_added(struct scsi_qla_host *, fc_port_t *); extern void qlt_fc_port_deleted(struct scsi_qla_host *, fc_port_t *); -extern void qlt_set_mode(struct scsi_qla_host *ha); -extern void qlt_clear_mode(struct scsi_qla_host *ha); extern int __init qlt_init(void); extern void qlt_exit(void); extern void qlt_update_vp_map(struct scsi_qla_host *, int); @@ -1083,13 +1077,9 @@ static inline void qla_reverse_ini_mode(struct scsi_qla_host *ha) /* * Exported symbols from qla_target.c LLD logic used by qla2xxx code.. */ -extern void qlt_24xx_atio_pkt_all_vps(struct scsi_qla_host *, - struct atio_from_isp *); extern void qlt_response_pkt_all_vps(struct scsi_qla_host *, response_t *); extern int qlt_rdy_to_xfer(struct qla_tgt_cmd *); extern int qlt_xmit_response(struct qla_tgt_cmd *, int, uint8_t); -extern int qlt_rdy_to_xfer_dif(struct qla_tgt_cmd *); -extern int qlt_xmit_response_dif(struct qla_tgt_cmd *, int, uint8_t); extern void qlt_xmit_tm_rsp(struct qla_tgt_mgmt_cmd *); extern void qlt_free_mcmd(struct qla_tgt_mgmt_cmd *); extern void qlt_free_cmd(struct qla_tgt_cmd *cmd); diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index 031b2961c6b7..73f9feecda72 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -786,7 +786,16 @@ static void tcm_qla2xxx_clear_nacl_from_fcport_map(struct qla_tgt_sess *sess) pr_debug("fc_rport domain: port_id 0x%06x\n", nacl->nport_id); node = btree_remove32(&lport->lport_fcport_map, nacl->nport_id); - WARN_ON(node && (node != se_nacl)); + if (WARN_ON(node && (node != se_nacl))) { + /* + * The nacl no longer matches what we think it should be. + * Most likely a new dynamic acl has been added while + * someone dropped the hardware lock. It clearly is a + * bug elsewhere, but this bit can't make things worse. + */ + btree_insert32(&lport->lport_fcport_map, nacl->nport_id, + node, GFP_ATOMIC); + } pr_debug("Removed from fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%06x\n", se_nacl, nacl->nport_wwnn, nacl->nport_id); diff --git a/drivers/target/Kconfig b/drivers/target/Kconfig index dc2d84ac5a0e..81d44c477a5b 100644 --- a/drivers/target/Kconfig +++ b/drivers/target/Kconfig @@ -31,6 +31,13 @@ config TCM_PSCSI Say Y here to enable the TCM/pSCSI subsystem plugin for non-buffered passthrough access to Linux/SCSI device +config TCM_USER + tristate "TCM/USER Subsystem Plugin for Linux" + depends on UIO && NET + help + Say Y here to enable the TCM/USER subsystem plugin for a userspace + process to handle requests + source "drivers/target/loopback/Kconfig" source "drivers/target/tcm_fc/Kconfig" source "drivers/target/iscsi/Kconfig" diff --git a/drivers/target/Makefile b/drivers/target/Makefile index 85b012d2f89b..bbb4a7d638ef 100644 --- a/drivers/target/Makefile +++ b/drivers/target/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_TARGET_CORE) += target_core_mod.o obj-$(CONFIG_TCM_IBLOCK) += target_core_iblock.o obj-$(CONFIG_TCM_FILEIO) += target_core_file.o obj-$(CONFIG_TCM_PSCSI) += target_core_pscsi.o +obj-$(CONFIG_TCM_USER) += target_core_user.o # Fabric modules obj-$(CONFIG_LOOPBACK_TARGET) += loopback/ diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 260c3e1e312c..b19e4329ba00 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3709,7 +3709,6 @@ static inline void iscsit_thread_check_cpumask( struct task_struct *p, int mode) { - char buf[128]; /* * mode == 1 signals iscsi_target_tx_thread() usage. * mode == 0 signals iscsi_target_rx_thread() usage. @@ -3728,8 +3727,6 @@ static inline void iscsit_thread_check_cpumask( * both TX and RX kthreads are scheduled to run on the * same CPU. */ - memset(buf, 0, 128); - cpumask_scnprintf(buf, 128, conn->conn_cpumask); set_cpus_allowed_ptr(p, conn->conn_cpumask); } @@ -4326,8 +4323,7 @@ int iscsit_close_connection( if (conn->conn_tx_hash.tfm) crypto_free_hash(conn->conn_tx_hash.tfm); - if (conn->conn_cpumask) - free_cpumask_var(conn->conn_cpumask); + free_cpumask_var(conn->conn_cpumask); kfree(conn->conn_ops); conn->conn_ops = NULL; diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c index ae03f3e5de1e..9059c1e0b26e 100644 --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -669,12 +669,10 @@ static ssize_t lio_target_nacl_show_info( } else { sess = se_sess->fabric_sess_ptr; - if (sess->sess_ops->InitiatorName) - rb += sprintf(page+rb, "InitiatorName: %s\n", - sess->sess_ops->InitiatorName); - if (sess->sess_ops->InitiatorAlias) - rb += sprintf(page+rb, "InitiatorAlias: %s\n", - sess->sess_ops->InitiatorAlias); + rb += sprintf(page+rb, "InitiatorName: %s\n", + sess->sess_ops->InitiatorName); + rb += sprintf(page+rb, "InitiatorAlias: %s\n", + sess->sess_ops->InitiatorAlias); rb += sprintf(page+rb, "LIO Session ID: %u " "ISID: 0x%02x %02x %02x %02x %02x %02x " diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c index 0d1e6ee3e992..a0ae5fc0ad75 100644 --- a/drivers/target/iscsi/iscsi_target_erl0.c +++ b/drivers/target/iscsi/iscsi_target_erl0.c @@ -345,7 +345,6 @@ static int iscsit_dataout_check_datasn( struct iscsi_cmd *cmd, unsigned char *buf) { - int dump = 0, recovery = 0; u32 data_sn = 0; struct iscsi_conn *conn = cmd->conn; struct iscsi_data *hdr = (struct iscsi_data *) buf; @@ -370,13 +369,11 @@ static int iscsit_dataout_check_datasn( pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x" " higher than expected 0x%08x.\n", cmd->init_task_tag, be32_to_cpu(hdr->datasn), data_sn); - recovery = 1; goto recover; } else if (be32_to_cpu(hdr->datasn) < data_sn) { pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x" " lower than expected 0x%08x, discarding payload.\n", cmd->init_task_tag, be32_to_cpu(hdr->datasn), data_sn); - dump = 1; goto dump; } @@ -392,8 +389,7 @@ dump: if (iscsit_dump_data_payload(conn, payload_length, 1) < 0) return DATAOUT_CANNOT_RECOVER; - return |