diff options
89 files changed, 1956 insertions, 659 deletions
diff --git a/Documentation/networking/ipvs-sysctl.rst b/Documentation/networking/ipvs-sysctl.rst index 95ef56d62077..387fda80f05f 100644 --- a/Documentation/networking/ipvs-sysctl.rst +++ b/Documentation/networking/ipvs-sysctl.rst @@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER 0: disable any special handling on port reuse. The new connection will be delivered to the same real server that was - servicing the previous connection. This will effectively - disable expire_nodest_conn. + servicing the previous connection. bit 1: enable rescheduling of new connections when it is safe. That is, whenever expire_nodest_conn and for TCP sockets, when diff --git a/Documentation/networking/timestamping.rst b/Documentation/networking/timestamping.rst index a722eb30e014..80b13353254a 100644 --- a/Documentation/networking/timestamping.rst +++ b/Documentation/networking/timestamping.rst @@ -486,8 +486,8 @@ of packets. Drivers are free to use a more permissive configuration than the requested configuration. It is expected that drivers should only implement directly the most generic mode that can be supported. For example if the hardware can -support HWTSTAMP_FILTER_V2_EVENT, then it should generally always upscale -HWTSTAMP_FILTER_V2_L2_SYNC_MESSAGE, and so forth, as HWTSTAMP_FILTER_V2_EVENT +support HWTSTAMP_FILTER_PTP_V2_EVENT, then it should generally always upscale +HWTSTAMP_FILTER_PTP_V2_L2_SYNC, and so forth, as HWTSTAMP_FILTER_PTP_V2_EVENT is more generic (and more useful to applications). A driver which supports hardware time stamping shall update the struct diff --git a/MAINTAINERS b/MAINTAINERS index a1fb7f6307ba..360e9aa0205d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3580,13 +3580,14 @@ L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/broadcom/b44.* -BROADCOM B53 ETHERNET SWITCH DRIVER +BROADCOM B53/SF2 ETHERNET SWITCH DRIVER M: Florian Fainelli <f.fainelli@gmail.com> L: netdev@vger.kernel.org L: openwrt-devel@lists.openwrt.org (subscribers-only) S: Supported F: Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml F: drivers/net/dsa/b53/* +F: drivers/net/dsa/bcm_sf2* F: include/linux/dsa/brcm.h F: include/linux/platform_data/b53.h @@ -18493,6 +18494,7 @@ F: include/uapi/linux/pkt_sched.h F: include/uapi/linux/tc_act/ F: include/uapi/linux/tc_ematch/ F: net/sched/ +F: tools/testing/selftests/tc-testing TC90522 MEDIA DRIVER M: Akihiro Tsukada <tskd08@gmail.com> diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index 43fc3087aeb3..013e9c02be71 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -1002,57 +1002,32 @@ static void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member) data &= ~PORT_VLAN_MEMBERSHIP; data |= (member & dev->port_mask); ksz_pwrite8(dev, port, P_MIRROR_CTRL, data); - dev->ports[port].member = member; } static void ksz8_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) { struct ksz_device *dev = ds->priv; - int forward = dev->member; struct ksz_port *p; - int member = -1; u8 data; - p = &dev->ports[port]; - ksz_pread8(dev, port, P_STP_CTRL, &data); data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); switch (state) { case BR_STATE_DISABLED: data |= PORT_LEARN_DISABLE; - if (port < dev->phy_port_cnt) - member = 0; break; case BR_STATE_LISTENING: data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); - if (port < dev->phy_port_cnt && - p->stp_state == BR_STATE_DISABLED) - member = dev->host_mask | p->vid_member; break; case BR_STATE_LEARNING: data |= PORT_RX_ENABLE; break; case BR_STATE_FORWARDING: data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); - - /* This function is also used internally. */ - if (port == dev->cpu_port) - break; - - /* Port is a member of a bridge. */ - if (dev->br_member & BIT(port)) { - dev->member |= BIT(port); - member = dev->member; - } else { - member = dev->host_mask | p->vid_member; - } break; case BR_STATE_BLOCKING: data |= PORT_LEARN_DISABLE; - if (port < dev->phy_port_cnt && - p->stp_state == BR_STATE_DISABLED) - member = dev->host_mask | p->vid_member; break; default: dev_err(ds->dev, "invalid STP state: %d\n", state); @@ -1060,22 +1035,11 @@ static void ksz8_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) } ksz_pwrite8(dev, port, P_STP_CTRL, data); + + p = &dev->ports[port]; p->stp_state = state; - /* Port membership may share register with STP state. */ - if (member >= 0 && member != p->member) - ksz8_cfg_port_member(dev, port, (u8)member); - - /* Check if forwarding needs to be updated. */ - if (state != BR_STATE_FORWARDING) { - if (dev->br_member & BIT(port)) - dev->member &= ~BIT(port); - } - /* When topology has changed the function ksz_update_port_member - * should be called to modify port forwarding behavior. - */ - if (forward != dev->member) - ksz_update_port_member(dev, port); + ksz_update_port_member(dev, port); } static void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) @@ -1341,7 +1305,7 @@ static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port) static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port) { - struct ksz_port *p = &dev->ports[port]; + struct dsa_switch *ds = dev->ds; struct ksz8 *ksz8 = dev->priv; const u32 *masks; u8 member; @@ -1368,10 +1332,11 @@ static void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port) if (!ksz_is_ksz88x3(dev)) ksz8795_cpu_interface_select(dev, port); - member = dev->port_mask; + member = dsa_user_ports(ds); } else { - member = dev->host_mask | p->vid_member; + member = BIT(dsa_upstream_port(ds, port)); } + ksz8_cfg_port_member(dev, port, member); } @@ -1392,20 +1357,13 @@ static void ksz8_config_cpu_port(struct dsa_switch *ds) ksz_cfg(dev, regs[S_TAIL_TAG_CTRL], masks[SW_TAIL_TAG_ENABLE], true); p = &dev->ports[dev->cpu_port]; - p->vid_member = dev->port_mask; p->on = 1; ksz8_port_setup(dev, dev->cpu_port, true); - dev->member = dev->host_mask; for (i = 0; i < dev->phy_port_cnt; i++) { p = &dev->ports[i]; - /* Initialize to non-zero so that ksz_cfg_port_member() will - * be called. - */ - p->vid_member = BIT(i); - p->member = dev->port_mask; ksz8_port_stp_state_set(ds, i, BR_STATE_DISABLED); /* Last port may be disabled. */ diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 854e25f43fa7..353b5f981740 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -391,7 +391,6 @@ static void ksz9477_cfg_port_member(struct ksz_device *dev, int port, u8 member) { ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member); - dev->ports[port].member = member; } static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port, @@ -400,8 +399,6 @@ static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port, struct ksz_device *dev = ds->priv; struct ksz_port *p = &dev->ports[port]; u8 data; - int member = -1; - int forward = dev->member; ksz_pread8(dev, port, P_STP_CTRL, &data); data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); @@ -409,40 +406,18 @@ static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port, switch (state) { case BR_STATE_DISABLED: data |= PORT_LEARN_DISABLE; - if (port != dev->cpu_port) - member = 0; break; case BR_STATE_LISTENING: data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); - if (port != dev->cpu_port && - p->stp_state == BR_STATE_DISABLED) - member = dev->host_mask | p->vid_member; break; case BR_STATE_LEARNING: data |= PORT_RX_ENABLE; break; case BR_STATE_FORWARDING: data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); - - /* This function is also used internally. */ - if (port == dev->cpu_port) - break; - - member = dev->host_mask | p->vid_member; - mutex_lock(&dev->dev_mutex); - - /* Port is a member of a bridge. */ - if (dev->br_member & (1 << port)) { - dev->member |= (1 << port); - member = dev->member; - } - mutex_unlock(&dev->dev_mutex); break; case BR_STATE_BLOCKING: data |= PORT_LEARN_DISABLE; - if (port != dev->cpu_port && - p->stp_state == BR_STATE_DISABLED) - member = dev->host_mask | p->vid_member; break; default: dev_err(ds->dev, "invalid STP state: %d\n", state); @@ -451,23 +426,8 @@ static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port, ksz_pwrite8(dev, port, P_STP_CTRL, data); p->stp_state = state; - mutex_lock(&dev->dev_mutex); - /* Port membership may share register with STP state. */ - if (member >= 0 && member != p->member) - ksz9477_cfg_port_member(dev, port, (u8)member); - - /* Check if forwarding needs to be updated. */ - if (state != BR_STATE_FORWARDING) { - if (dev->br_member & (1 << port)) - dev->member &= ~(1 << port); - } - /* When topology has changed the function ksz_update_port_member - * should be called to modify port forwarding behavior. - */ - if (forward != dev->member) - ksz_update_port_member(dev, port); - mutex_unlock(&dev->dev_mutex); + ksz_update_port_member(dev, port); } static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port) @@ -1168,10 +1128,10 @@ static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port) static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) { - u8 data8; - u8 member; - u16 data16; struct ksz_port *p = &dev->ports[port]; + struct dsa_switch *ds = dev->ds; + u8 data8, member; + u16 data16; /* enable tag tail for host port */ if (cpu_port) @@ -1250,12 +1210,12 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8); p->phydev.duplex = 1; } - mutex_lock(&dev->dev_mutex); + if (cpu_port) - member = dev->port_mask; + member = dsa_user_ports(ds); else - member = dev->host_mask | p->vid_member; - mutex_unlock(&dev->dev_mutex); + member = BIT(dsa_upstream_port(ds, port)); + ksz9477_cfg_port_member(dev, port, member); /* clear pending interrupts */ @@ -1276,8 +1236,6 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds) const char *prev_mode; dev->cpu_port = i; - dev->host_mask = (1 << dev->cpu_port); - dev->port_mask |= dev->host_mask; p = &dev->ports[i]; /* Read from XMII register to determine host port @@ -1312,23 +1270,15 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds) /* enable cpu port */ ksz9477_port_setup(dev, i, true); - p->vid_member = dev->port_mask; p->on = 1; } } - dev->member = dev->host_mask; - for (i = 0; i < dev->port_cnt; i++) { if (i == dev->cpu_port) continue; p = &dev->ports[i]; - /* Initialize to non-zero so that ksz_cfg_port_member() will - * be called. - */ - p->vid_member = (1 << i); - p->member = dev->port_mask; ksz9477_port_stp_state_set(ds, i, BR_STATE_DISABLED); p->on = 1; if (i < dev->phy_port_cnt) diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 7c2968a639eb..8a04302018dc 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -22,21 +22,40 @@ void ksz_update_port_member(struct ksz_device *dev, int port) { - struct ksz_port *p; + struct ksz_port *p = &dev->ports[port]; + struct dsa_switch *ds = dev->ds; + u8 port_member = 0, cpu_port; + const struct dsa_port *dp; int i; - for (i = 0; i < dev->port_cnt; i++) { - if (i == port || i == dev->cpu_port) + if (!dsa_is_user_port(ds, port)) + return; + + dp = dsa_to_port(ds, port); + cpu_port = BIT(dsa_upstream_port(ds, port)); + + for (i = 0; i < ds->num_ports; i++) { + const struct dsa_port *other_dp = dsa_to_port(ds, i); + struct ksz_port *other_p = &dev->ports[i]; + u8 val = 0; + + if (!dsa_is_user_port(ds, i)) continue; - p = &dev->ports[i]; - if (!(dev->member & (1 << i))) + if (port == i) + continue; |