diff options
29 files changed, 4066 insertions, 26 deletions
diff --git a/Documentation/devicetree/bindings/drm/tilcdc/panel.txt b/Documentation/devicetree/bindings/drm/tilcdc/panel.txt new file mode 100644 index 000000000000..9301c330d1a6 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/tilcdc/panel.txt @@ -0,0 +1,59 @@ +Device-Tree bindings for tilcdc DRM generic panel output driver + +Required properties: + - compatible: value should be "ti,tilcdc,panel". + - panel-info: configuration info to configure LCDC correctly for the panel + - ac-bias: AC Bias Pin Frequency + - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt + - dma-burst-sz: DMA burst size + - bpp: Bits per pixel + - fdd: FIFO DMA Request Delay + - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling + - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore + - raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most + - fifo-th: DMA FIFO threshold + - display-timings: typical videomode of lcd panel. Multiple video modes + can be listed if the panel supports multiple timings, but the 'native-mode' + should be the preferred/default resolution. Refer to + Documentation/devicetree/bindings/video/display-timing.txt for display + timing binding details. + +Recommended properties: + - pinctrl-names, pinctrl-0: the pincontrol settings to configure + muxing properly for pins that connect to TFP410 device + +Example: + + /* Settings for CDTech_S035Q01 / LCD3 cape: */ + lcd3 { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + pinctrl-0 = <&bone_lcd3_cape_lcd_pins>; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + display-timings { + native-mode = <&timing0>; + timing0: 320x240 { + hactive = <320>; + vactive = <240>; + hback-porch = <21>; + hfront-porch = <58>; + hsync-len = <47>; + vback-porch = <11>; + vfront-porch = <23>; + vsync-len = <2>; + clock-frequency = <8000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/drm/tilcdc/slave.txt b/Documentation/devicetree/bindings/drm/tilcdc/slave.txt new file mode 100644 index 000000000000..3d2c52460dca --- /dev/null +++ b/Documentation/devicetree/bindings/drm/tilcdc/slave.txt @@ -0,0 +1,18 @@ +Device-Tree bindings for tilcdc DRM encoder slave output driver + +Required properties: + - compatible: value should be "ti,tilcdc,slave". + - i2c: the phandle for the i2c device the encoder slave is connected to + +Recommended properties: + - pinctrl-names, pinctrl-0: the pincontrol settings to configure + muxing properly for pins that connect to TFP410 device + +Example: + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + }; diff --git a/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt b/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt new file mode 100644 index 000000000000..a58ae7756fc6 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt @@ -0,0 +1,21 @@ +Device-Tree bindings for tilcdc DRM TFP410 output driver + +Required properties: + - compatible: value should be "ti,tilcdc,tfp410". + - i2c: the phandle for the i2c device to use for DDC + +Recommended properties: + - pinctrl-names, pinctrl-0: the pincontrol settings to configure + muxing properly for pins that connect to TFP410 device + - powerdn-gpio: the powerdown GPIO, pulled low to power down the + TFP410 device (for DPMS_OFF) + +Example: + + dvicape { + compatible = "ti,tilcdc,tfp410"; + i2c = <&i2c2>; + pinctrl-names = "default"; + pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>; + powerdn-gpio = <&gpio2 31 0>; + }; diff --git a/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt new file mode 100644 index 000000000000..e5f130159ae1 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt @@ -0,0 +1,21 @@ +Device-Tree bindings for tilcdc DRM driver + +Required properties: + - compatible: value should be "ti,am33xx-tilcdc". + - interrupts: the interrupt number + - reg: base address and size of the LCDC device + +Recommended properties: + - interrupt-parent: the phandle for the interrupt controller that + services interrupts for this device. + - ti,hwmods: Name of the hwmod associated to the LCDC + +Example: + + fb: fb@4830e000 { + compatible = "ti,am33xx-tilcdc"; + reg = <0x4830e000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <36>; + ti,hwmods = "lcdc"; + }; diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 0ce5f52ac56e..f8dae851130c 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -217,3 +217,5 @@ source "drivers/gpu/drm/shmobile/Kconfig" source "drivers/gpu/drm/tegra/Kconfig" source "drivers/gpu/drm/omapdrm/Kconfig" + +source "drivers/gpu/drm/tilcdc/Kconfig" diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index b6b43cbc18e4..0d59b24f8d23 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -51,4 +51,5 @@ obj-$(CONFIG_DRM_AST) += ast/ obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/ obj-$(CONFIG_DRM_TEGRA) += tegra/ obj-$(CONFIG_DRM_OMAP) += omapdrm/ +obj-$(CONFIG_DRM_TILCDC) += tilcdc/ obj-y += i2c/ diff --git a/drivers/gpu/drm/drm_encoder_slave.c b/drivers/gpu/drm/drm_encoder_slave.c index 63e733408b6d..48c52f7df4e6 100644 --- a/drivers/gpu/drm/drm_encoder_slave.c +++ b/drivers/gpu/drm/drm_encoder_slave.c @@ -123,3 +123,66 @@ void drm_i2c_encoder_destroy(struct drm_encoder *drm_encoder) module_put(module); } EXPORT_SYMBOL(drm_i2c_encoder_destroy); + +/* + * Wrapper fxns which can be plugged in to drm_encoder_helper_funcs: + */ + +static inline struct drm_encoder_slave_funcs * +get_slave_funcs(struct drm_encoder *enc) +{ + return to_encoder_slave(enc)->slave_funcs; +} + +void drm_i2c_encoder_dpms(struct drm_encoder *encoder, int mode) +{ + get_slave_funcs(encoder)->dpms(encoder, mode); +} +EXPORT_SYMBOL(drm_i2c_encoder_dpms); + +bool drm_i2c_encoder_mode_fixup(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return get_slave_funcs(encoder)->mode_fixup(encoder, mode, adjusted_mode); +} +EXPORT_SYMBOL(drm_i2c_encoder_mode_fixup); + +void drm_i2c_encoder_prepare(struct drm_encoder *encoder) +{ + drm_i2c_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); +} +EXPORT_SYMBOL(drm_i2c_encoder_prepare); + +void drm_i2c_encoder_commit(struct drm_encoder *encoder) +{ + drm_i2c_encoder_dpms(encoder, DRM_MODE_DPMS_ON); +} +EXPORT_SYMBOL(drm_i2c_encoder_commit); + +void drm_i2c_encoder_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + get_slave_funcs(encoder)->mode_set(encoder, mode, adjusted_mode); +} +EXPORT_SYMBOL(drm_i2c_encoder_mode_set); + +enum drm_connector_status drm_i2c_encoder_detect(struct drm_encoder *encoder, + struct drm_connector *connector) +{ + return get_slave_funcs(encoder)->detect(encoder, connector); +} +EXPORT_SYMBOL(drm_i2c_encoder_detect); + +void drm_i2c_encoder_save(struct drm_encoder *encoder) +{ + get_slave_funcs(encoder)->save(encoder); +} +EXPORT_SYMBOL(drm_i2c_encoder_save); + +void drm_i2c_encoder_restore(struct drm_encoder *encoder) +{ + get_slave_funcs(encoder)->restore(encoder); +} +EXPORT_SYMBOL(drm_i2c_encoder_restore); diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c index 1c8549dae99a..0b5af7d0edb1 100644 --- a/drivers/gpu/drm/drm_fb_cma_helper.c +++ b/drivers/gpu/drm/drm_fb_cma_helper.c @@ -180,6 +180,59 @@ struct drm_gem_cma_object *drm_fb_cma_get_gem_obj(struct drm_framebuffer *fb, } EXPORT_SYMBOL_GPL(drm_fb_cma_get_gem_obj); +#ifdef CONFIG_DEBUG_FS +/** + * drm_fb_cma_describe() - Helper to dump information about a single + * CMA framebuffer object + */ +void drm_fb_cma_describe(struct drm_framebuffer *fb, struct seq_file *m) +{ + struct drm_fb_cma *fb_cma = to_fb_cma(fb); + int i, n = drm_format_num_planes(fb->pixel_format); + + seq_printf(m, "fb: %dx%d@%4.4s\n", fb->width, fb->height, + (char *)&fb->pixel_format); + + for (i = 0; i < n; i++) { + seq_printf(m, " %d: offset=%d pitch=%d, obj: ", + i, fb->offsets[i], fb->pitches[i]); + drm_gem_cma_describe(fb_cma->obj[i], m); + } +} +EXPORT_SYMBOL_GPL(drm_fb_cma_describe); + +/** + * drm_fb_cma_debugfs_show() - Helper to list CMA framebuffer objects + * in debugfs. + */ +int drm_fb_cma_debugfs_show(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + struct drm_framebuffer *fb; + int ret; + + ret = mutex_lock_interruptible(&dev->mode_config.mutex); + if (ret) + return ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) { + mutex_unlock(&dev->mode_config.mutex); + return ret; + } + + list_for_each_entry(fb, &dev->mode_config.fb_list, head) + drm_fb_cma_describe(fb, m); + + mutex_unlock(&dev->struct_mutex); + mutex_unlock(&dev->mode_config.mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(drm_fb_cma_debugfs_show); +#endif + static struct fb_ops drm_fbdev_cma_ops = { .owner = THIS_MODULE, .fb_fillrect = sys_fillrect, diff --git a/drivers/gpu/drm/drm_gem_cma_helper.c b/drivers/gpu/drm/drm_gem_cma_helper.c index 1aa8fee1e865..0a7e011509bd 100644 --- a/drivers/gpu/drm/drm_gem_cma_helper.c +++ b/drivers/gpu/drm/drm_gem_cma_helper.c @@ -249,3 +249,24 @@ int drm_gem_cma_dumb_destroy(struct drm_file *file_priv, return drm_gem_handle_delete(file_priv, handle); } EXPORT_SYMBOL_GPL(drm_gem_cma_dumb_destroy); + +#ifdef CONFIG_DEBUG_FS +void drm_gem_cma_describe(struct drm_gem_cma_object *cma_obj, struct seq_file *m) +{ + struct drm_gem_object *obj = &cma_obj->base; + struct drm_device *dev = obj->dev; + uint64_t off = 0; + + WARN_ON(!mutex_is_locked(&dev->struct_mutex)); + + if (obj->map_list.map) + off = (uint64_t)obj->map_list.hash.key; + + seq_printf(m, "%2d (%2d) %08llx %08Zx %p %d", + obj->name, obj->refcount.refcount.counter, + off, cma_obj->paddr, cma_obj->vaddr, obj->size); + + seq_printf(m, "\n"); +} +EXPORT_SYMBOL_GPL(drm_gem_cma_describe); +#endif diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 38e79927b2d7..a6a8643a6a77 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -867,6 +867,7 @@ void drm_send_vblank_event(struct drm_device *dev, int crtc, now = get_drm_timestamp(); } + e->pipe = crtc; send_vblank_event(dev, e, seq, &now); } EXPORT_SYMBOL(drm_send_vblank_event); diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig index 16118363509a..4d341db462a2 100644 --- a/drivers/gpu/drm/i2c/Kconfig +++ b/drivers/gpu/drm/i2c/Kconfig @@ -19,4 +19,10 @@ config DRM_I2C_SIL164 when used in pairs) TMDS transmitters, used in some nVidia video cards. +config DRM_I2C_NXP_TDA998X + tristate "NXP Semiconductors TDA998X HDMI encoder" + default m if DRM_TILCDC + help + Support for NXP Semiconductors TDA998X HDMI encoders. + endmenu diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile index 92862563e7ee..43aa33baebed 100644 --- a/drivers/gpu/drm/i2c/Makefile +++ b/drivers/gpu/drm/i2c/Makefile @@ -5,3 +5,6 @@ obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o sil164-y := sil164_drv.o obj-$(CONFIG_DRM_I2C_SIL164) += sil164.o + +tda998x-y := tda998x_drv.o +obj-$(CONFIG_DRM_I2C_NXP_TDA998X) += tda998x.o diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c new file mode 100644 index 000000000000..e68b58a1aaf9 --- /dev/null +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -0,0 +1,906 @@ +/* + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark <robdclark@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + + + +#include <linux/module.h> + +#include <drm/drmP.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_encoder_slave.h> +#include <drm/drm_edid.h> + + +#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) + +struct tda998x_priv { + struct i2c_client *cec; + uint16_t rev; + uint8_t current_page; + int dpms; +}; + +#define to_tda998x_priv(x) ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv) + +/* The TDA9988 series of devices use a paged register scheme.. to simplify + * things we encode the page # in upper bits of the register #. To read/ + * write a given register, we need to make sure CURPAGE register is set + * appropriately. Which implies reads/writes are not atomic. Fun! + */ + +#define REG(page, addr) (((page) << 8) | (addr)) +#define REG2ADDR(reg) ((reg) & 0xff) +#define REG2PAGE(reg) (((reg) >> 8) & 0xff) + +#define REG_CURPAGE 0xff /* write */ + + +/* Page 00h: General Control */ +#define REG_VERSION_LSB REG(0x00, 0x00) /* read */ +#define REG_MAIN_CNTRL0 REG(0x00, 0x01) /* read/write */ +# define MAIN_CNTRL0_SR (1 << 0) +# define MAIN_CNTRL0_DECS (1 << 1) +# define MAIN_CNTRL0_DEHS (1 << 2) +# define MAIN_CNTRL0_CECS (1 << 3) +# define MAIN_CNTRL0_CEHS (1 << 4) +# define MAIN_CNTRL0_SCALER (1 << 7) +#define REG_VERSION_MSB REG(0x00, 0x02) /* read */ +#define REG_SOFTRESET REG(0x00, 0x0a) /* write */ +# define SOFTRESET_AUDIO (1 << 0) +# define SOFTRESET_I2C_MASTER (1 << 1) +#define REG_DDC_DISABLE REG(0x00, 0x0b) /* read/write */ +#define REG_CCLK_ON REG(0x00, 0x0c) /* read/write */ +#define REG_I2C_MASTER REG(0x00, 0x0d) /* read/write */ +# define I2C_MASTER_DIS_MM (1 << 0) +# define I2C_MASTER_DIS_FILT (1 << 1) +# define I2C_MASTER_APP_STRT_LAT (1 << 2) +#define REG_INT_FLAGS_0 REG(0x00, 0x0f) /* read/write */ +#define REG_INT_FLAGS_1 REG(0x00, 0x10) /* read/write */ +#define REG_INT_FLAGS_2 REG(0x00, 0x11) /* read/write */ +# define INT_FLAGS_2_EDID_BLK_RD (1 << 1) +#define REG_ENA_VP_0 REG(0x00, 0x18) /* read/write */ +#define REG_ENA_VP_1 REG(0x00, 0x19) /* read/write */ +#define REG_ENA_VP_2 REG(0x00, 0x1a) /* read/write */ +#define REG_ENA_AP REG(0x00, 0x1e) /* read/write */ +#define REG_VIP_CNTRL_0 REG(0x00, 0x20) /* write */ +# define VIP_CNTRL_0_MIRR_A (1 << 7) +# define VIP_CNTRL_0_SWAP_A(x) (((x) & 7) << 4) +# define VIP_CNTRL_0_MIRR_B (1 << 3) +# define VIP_CNTRL_0_SWAP_B(x) (((x) & 7) << 0) +#define REG_VIP_CNTRL_1 REG(0x00, 0x21) /* write */ +# define VIP_CNTRL_1_MIRR_C (1 << 7) +# define VIP_CNTRL_1_SWAP_C(x) (((x) & 7) << 4) +# define VIP_CNTRL_1_MIRR_D (1 << 3) +# define VIP_CNTRL_1_SWAP_D(x) (((x) & 7) << 0) +#define REG_VIP_CNTRL_2 REG(0x00, 0x22) /* write */ +# define VIP_CNTRL_2_MIRR_E (1 << 7) +# define VIP_CNTRL_2_SWAP_E(x) (((x) & 7) << 4) +# define VIP_CNTRL_2_MIRR_F (1 << 3) +# define VIP_CNTRL_2_SWAP_F(x) (((x) & 7) << 0) +#define REG_VIP_CNTRL_3 REG(0x00, 0x23) /* write */ +# define VIP_CNTRL_3_X_TGL (1 << 0) +# define VIP_CNTRL_3_H_TGL (1 << 1) +# define VIP_CNTRL_3_V_TGL (1 << 2) +# define VIP_CNTRL_3_EMB (1 << 3) +# define VIP_CNTRL_3_SYNC_DE (1 << 4) +# define VIP_CNTRL_3_SYNC_HS (1 << 5) +# define VIP_CNTRL_3_DE_INT (1 << 6) +# define VIP_CNTRL_3_EDGE (1 << 7) +#define REG_VIP_CNTRL_4 REG(0x00, 0x24) /* write */ +# define VIP_CNTRL_4_BLC(x) (((x) & 3) << 0) +# define VIP_CNTRL_4_BLANKIT(x) (((x) & 3) << 2) +# define VIP_CNTRL_4_CCIR656 (1 << 4) +# define VIP_CNTRL_4_656_ALT (1 << 5) +# define VIP_CNTRL_4_TST_656 (1 << 6) +# define VIP_CNTRL_4_TST_PAT (1 << 7) +#define REG_VIP_CNTRL_5 REG(0x00, 0x25) /* write */ +# define VIP_CNTRL_5_CKCASE (1 << 0) +# define VIP_CNTRL_5_SP_CNT(x) (((x) & 3) << 1) +#define REG_MAT_CONTRL REG(0x00, 0x80) /* write */ +# define MAT_CONTRL_MAT_SC(x) (((x) & 3) << 0) +# define MAT_CONTRL_MAT_BP (1 << 2) +#define REG_VIDFORMAT REG(0x00, 0xa0) /* write */ +#define REG_REFPIX_MSB REG(0x00, 0xa1) /* write */ +#define REG_REFPIX_LSB REG(0x00, 0xa2) /* write */ +#define REG_REFLINE_MSB REG(0x00, 0xa3) /* write */ +#define REG_REFLINE_LSB REG(0x00, 0xa4) /* write */ +#define REG_NPIX_MSB REG(0x00, 0xa5) /* write */ +#define REG_NPIX_LSB REG(0x00, 0xa6) /* write */ +#define REG_NLINE_MSB REG(0x00, 0xa7) /* write */ +#define REG_NLINE_LSB REG(0x00, 0xa8) /* write */ +#define REG_VS_LINE_STRT_1_MSB REG(0x00, 0xa9) /* write */ +#define REG_VS_LINE_STRT_1_LSB REG(0x00, 0xaa) /* write */ +#define REG_VS_PIX_STRT_1_MSB REG(0x00, 0xab) /* write */ +#define REG_VS_PIX_STRT_1_LSB REG(0x00, 0xac) /* write */ +#define REG_VS_LINE_END_1_MSB REG(0x00, 0xad) /* write */ +#define REG_VS_LINE_END_1_LSB REG(0x00, 0xae) /* write */ +#define REG_VS_PIX_END_1_MSB REG(0x00, 0xaf) /* write */ +#define REG_VS_PIX_END_1_LSB REG(0x00, 0xb0) /* write */ +#define REG_VS_PIX_STRT_2_MSB REG(0x00, 0xb3) /* write */ +#define REG_VS_PIX_STRT_2_LSB REG(0x00, 0xb4) /* write */ +#define REG_VS_PIX_END_2_MSB REG(0x00, 0xb7) /* write */ +#define REG_VS_PIX_END_2_LSB REG(0x00, 0xb8) /* write */ +#define REG_HS_PIX_START_MSB REG(0x00, 0xb9) /* write */ +#define REG_HS_PIX_START_LSB REG(0x00, 0xba) /* write */ +#define REG_HS_PIX_STOP_MSB REG(0x00, 0xbb) /* write */ +#define REG_HS_PIX_STOP_LSB REG(0x00, 0xbc) /* write */ +#define REG_VWIN_START_1_MSB REG(0x00, 0xbd) /* write */ +#define REG_VWIN_START_1_LSB REG(0x00, 0xbe) /* write */ +#define REG_VWIN_END_1_MSB REG(0x00, 0xbf) /* write */ +#define REG_VWIN_END_1_LSB REG(0x00, 0xc0) /* write */ +#define REG_DE_START_MSB REG(0x00, 0xc5) /* write */ +#define REG_DE_START_LSB REG(0x00, 0xc6) /* write */ +#define REG_DE_STOP_MSB REG(0x00, 0xc7) /* write */ +#define REG_DE_STOP_LSB REG(0x00, 0xc8) /* write */ +#define REG_TBG_CNTRL_0 REG(0x00, 0xca) /* write */ +# define TBG_CNTRL_0_FRAME_DIS (1 << 5) +# define TBG_CNTRL_0_SYNC_MTHD (1 << 6) +# define TBG_CNTRL_0_SYNC_ONCE (1 << 7) +#define REG_TBG_CNTRL_1 REG(0x00, 0xcb) /* write */ +# define TBG_CNTRL_1_VH_TGL_0 (1 << 0) +# define TBG_CNTRL_1_VH_TGL_1 (1 << 1) +# define TBG_CNTRL_1_VH_TGL_2 (1 << 2) +# define TBG_CNTRL_1_VHX_EXT_DE (1 << 3) +# define TBG_CNTRL_1_VHX_EXT_HS (1 << 4) +# define TBG_CNTRL_1_VHX_EXT_VS (1 << 5) +# define TBG_CNTRL_1_DWIN_DIS (1 << 6) +#define REG_ENABLE_SPACE REG(0x00, 0xd6) /* write */ +#define REG_HVF_CNTRL_0 REG(0x00, 0xe4) /* write */ +# define HVF_CNTRL_0_SM (1 << 7) +# define HVF_CNTRL_0_RWB (1 << 6) +# define HVF_CNTRL_0_PREFIL(x) (((x) & 3) << 2) +# define HVF_CNTRL_0_INTPOL(x) (((x) & 3) << 0) +#define REG_HVF_CNTRL_1 REG(0x00, 0xe5) /* write */ +# define HVF_CNTRL_1_FOR (1 << 0) +# define HVF_CNTRL_1_YUVBLK (1 << 1) +# define HVF_CNTRL_1_VQR(x) (((x) & 3) << 2) +# define HVF_CNTRL_1_PAD(x) (((x) & 3) << 4) +# define HVF_CNTRL_1_SEMI_PLANAR (1 << 6) +#define REG_RPT_CNTRL REG(0x00, 0xf0) /* write */ + + +/* Page 02h: PLL settings */ +#define REG_PLL_SERIAL_1 REG(0x02, 0x00) /* read/write */ +# define PLL_SERIAL_1_SRL_FDN (1 << 0) +# define PLL_SERIAL_1_SRL_IZ(x) (((x) & 3) << 1) +# define PLL_SERIAL_1_SRL_MAN_IZ (1 << 6) +#define REG_PLL_SERIAL_2 REG(0x02, 0x01) /* read/write */ +# define PLL_SERIAL_2_SRL_NOSC(x) (((x) & 3) << 0) +# define PLL_SERIAL_2_SRL_PR(x) (((x) & 0xf) << 4) +#define REG_PLL_SERIAL_3 REG(0x02, 0x02) /* read/write */ +# define PLL_SERIAL_3_SRL_CCIR (1 << 0) +# define PLL_SERIAL_3_SRL_DE (1 << 2) +# define PLL_SERIAL_3_SRL_PXIN_SEL (1 << 4) +#define REG_SERIALIZER REG(0x02, 0x03) /* read/write */ +#define REG_BUFFER_OUT REG(0x02, 0x04) /* read/write */ +#define REG_PLL_SCG1 REG(0x02, 0x05) /* read/write */ +#define REG_PLL_SCG2 REG(0x02, 0x06) /* read/write */ +#define REG_PLL_SCGN1 REG(0x02, 0x07) /* read/write */ +#define REG_PLL_SCGN2 REG(0x02, 0x08) /* read/write */ +#define REG_PLL_SCGR1 REG(0x02, 0x09) /* read/write */ +#define REG_PLL_SCGR2 REG(0x02, 0x0a) /* read/write */ +#define REG_AUDIO_DIV REG(0x02, 0x0e) /* read/write */ +#define REG_SEL_CLK REG(0x02, 0x11) /* read/write */ +# define SEL_CLK_SEL_CLK1 (1 << 0) +# define SEL_CLK_SEL_VRF_CLK(x) (((x) & 3) << 1) +# define SEL_CLK_ENA_SC_CLK (1 << 3) +#define REG_ANA_GENERAL REG(0x02, 0x12) /* read/write */ + + +/* Page 09h: EDID Control */ +#define REG_EDID_DATA_0 REG(0x09, 0x00) /* read */ +/* next 127 successive registers are the EDID block */ +#define REG_EDID_CTRL REG(0x09, 0xfa) /* read/write */ +#define REG_DDC_ADDR REG(0x09, 0xfb) /* read/write */ +#define REG_DDC_OFFS REG(0x09, 0xfc) /* read/write */ +#define REG_DDC_SEGM_ADDR REG(0x09, 0xfd) /* read/write */ +#define REG_DDC_SEGM REG(0x09, 0xfe) /* read/write */ + + +/* Page 10h: information frames and packets */ + + +/* Page 11h: audio settings and content info packets */ +#define REG_AIP_CNTRL_0 REG(0x11, 0x00) /* read/write */ +# define AIP_CNTRL_0_RST_FIFO (1 << 0) +# define AIP_CNTRL_0_SWAP (1 << 1) +# define AIP_CNTRL_0_LAYOUT (1 << 2) +# define AIP_CNTRL_0_ACR_MAN (1 << 5) +# define AIP_CNTRL_0_RST_CTS (1 << 6) +#define REG_ENC_CNTRL REG(0x11, 0x0d) /* read/write */ +# define ENC_CNTRL_RST_ENC (1 << 0) +# define ENC_CNTRL_RST_SEL (1 << 1) +# define ENC_CNTRL_CTL_CODE(x) (((x) & 3) << 2) + + +/* Page 12h: HDCP and OTP */ +#define REG_TX3 REG(0x12, 0x9a) /* read/write */ +#define REG_TX33 REG(0x12, 0xb8) /* read/write */ +# define TX33_HDMI (1 << 1) + + +/* Page 13h: Gamut related metadata packets */ + + + +/* CEC registers: (not paged) + */ +#define REG_CEC_FRO_IM_CLK_CTRL 0xfb /* read/write */ +# define CEC_FRO_IM_CLK_CTRL_GHOST_DIS (1 << 7) +# define CEC_FRO_IM_CLK_CTRL_ENA_OTP (1 << 6) +# define CEC_FRO_IM_CLK_CTRL_IMCLK_SEL (1 << 1) +# define CEC_FRO_IM_CLK_CTRL_FRO_DIV (1 << 0) +#define REG_CEC_RXSHPDLEV 0xfe /* read */ +# define CEC_RXSHPDLEV_RXSENS (1 << 0) +# define CEC_RXSHPDLEV_HPD (1 << 1) + +#define REG_CEC_ENAMODS 0xff /* read/write */ +# define CEC_ENAMODS_DIS_FRO (1 << 6) +# define CEC_ENAMODS_DIS_CCLK (1 << 5) +# define CEC_ENAMODS_EN_RXSENS (1 << 2) +# define CEC_ENAMODS_EN_HDMI (1 << 1) +# define CEC_ENAMODS_EN_CEC (1 << 0) + + +/* Device versions: */ +#define TDA9989N2 0x0101 +#define TDA19989 0x0201 +#define TDA19989N2 0x0202 +#define TDA19988 0x0301 + +static void +cec_write(struct drm_encoder *encoder, uint16_t addr, uint8_t val) +{ + struct i2c_client *client = to_tda998x_priv(encoder)->cec; + uint8_t buf[] = {addr, val}; + int ret; + + ret = i2c_master_send(client, buf, ARRAY_SIZE(buf)); + if (ret < 0) + dev_err(&client->dev, "Error %d writing to cec:0x%x\n", ret, addr); +} + +static uint8_t +cec_read(struct drm_encoder *encoder, uint8_t addr) +{ + struct i2c_client *client = to_tda998x_priv(encoder)->cec; + uint8_t val; + int ret; + + ret = i2c_master_send(client, &addr, sizeof(addr)); + if (ret < 0) + goto fail; + + ret = i2c_master_recv(client, &val, sizeof(val)); + if (ret < 0) + goto fail; + + return val; + +fail: + dev_err(&client->dev, "Error %d reading from cec:0x%x\n", ret, addr); + return 0; +} + +static void +set_page(struct drm_encoder *encoder, uint16_t reg) +{ + struct tda998x_priv *priv = to_tda998x_priv(encoder); + + if (REG2PAGE(reg) != priv->current_page) { + struct i2c_client *client = drm_i2c_encoder_get_client(encoder); + uint8_t buf[] = { + REG_CURPAGE, REG2PAGE(reg) + }; + int ret = i2c_master_send(client, buf, sizeof(buf)); + if (ret < 0) + dev_err(&client->dev, "Error %d writing to REG_CURPAGE\n", ret); + + priv->current_page = REG2PAGE(reg); + } +} + +static int +reg_read_range(struct drm_encoder *encoder, uint16_t reg, char *buf, int cnt) +{ + struct i2c_client *client = drm_i2c_encoder_get_client(encoder); + uint8_t addr = REG2ADDR(reg); + int ret; + + set_page(encoder, reg); + + ret = i2c_master_send(client, &addr, sizeof(addr)); + if (ret < 0) + goto fail; + + ret = i2c_master_recv(client, buf, cnt); + if (ret < 0) + goto fail; + + return ret; + +fail: + dev_err(&client->dev, "Error %d reading from 0x%x\n", ret, reg); + return ret; +} + +static uint8_t +reg_read(struct drm_encoder *encoder, uint16_t reg) +{ + uint8_t val = 0; + reg_read_range(encoder, reg, &val, sizeof(val)); + return val; +} + +static void +reg_write(struct drm_encoder *encoder, uint16_t reg, uint8_t val) +{ + struct i2c_client *client = drm_i2c_encoder_get_client(encoder); + uint8_t buf[] = {REG2ADDR(reg), val}; + int ret; + + set_page(encoder, reg); + + ret = i2c_master_send(client, buf, ARRAY_SIZE(buf)); + if (ret < 0) + dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg); +} + +static void +reg_write16(struct drm_encoder *encoder, uint16_t reg, uint16_t val) +{ + struct i2c_client *client = drm_i2c_encoder_get_client(encoder); + uint8_t buf[] = {REG2ADDR(reg), val >> 8, val}; + int ret; + + set_page(encoder, reg); + + ret = i2c_master_send(client, buf, ARRAY_SIZE(buf)); + if (ret < 0) + dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg); +} + +static void +reg_set(struct drm_encoder *encoder, uint16_t reg, uint8_t val) +{ + reg_write(encoder, reg, reg_read(encoder, reg) | val); +} + +static void +reg_clear(struct drm_encoder *encoder, uint16_t reg, uint8_t val) +{ + reg_write(encoder, reg, reg_read(encoder, reg) & ~val); +} + +static void +tda998x_reset(struct drm_encoder *encoder) +{ + /* reset audio and i2c master: */ + reg_set(encoder, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER); + msleep(50); + reg_clear(encoder, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER); + msleep(50); + + /* reset transmitter: */ + reg_set(encoder, REG_MAIN_CNTRL0, MAIN_CNTRL0_SR); + reg_clear(encoder, REG_MAIN_CNTRL0, MAIN_CNTRL0_SR); + + /* PLL registers common configuration */ |