diff options
78 files changed, 786 insertions, 483 deletions
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index bf7d64632e20..8390d6c00030 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -56,7 +56,6 @@ DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd))) override DTC_FLAGS := \ -Wno-avoid_unnecessary_addr_size \ -Wno-graph_child_address \ - -Wno-interrupt_provider \ -Wno-unique_unit_address \ -Wunique_unit_address_if_enabled diff --git a/Documentation/devicetree/bindings/cache/l2c2x0.yaml b/Documentation/devicetree/bindings/cache/l2c2x0.yaml index d7840a5c4037..10c1a900202f 100644 --- a/Documentation/devicetree/bindings/cache/l2c2x0.yaml +++ b/Documentation/devicetree/bindings/cache/l2c2x0.yaml @@ -100,9 +100,8 @@ properties: filter. Addresses in the filter window are directed to the M1 port. Other addresses will go to the M0 port. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 2 - maxItems: 2 + minItems: 2 + maxItems: 2 arm,io-coherent: description: indicates that the system is operating in an hardware diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index 68ea5f70b75f..ee7edc6f60e2 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -39,11 +39,11 @@ properties: reg: minItems: 2 - maxItems: 9 + maxItems: 10 reg-names: minItems: 2 - maxItems: 9 + maxItems: 10 interrupts: maxItems: 1 @@ -134,6 +134,36 @@ allOf: - qcom,qdu1000-llcc - qcom,sc8180x-llcc - qcom,sc8280xp-llcc + then: + properties: + reg: + items: + - description: LLCC0 base register region + - description: LLCC1 base register region + - description: LLCC2 base register region + - description: LLCC3 base register region + - description: LLCC4 base register region + - description: LLCC5 base register region + - description: LLCC6 base register region + - description: LLCC7 base register region + - description: LLCC broadcast base register region + reg-names: + items: + - const: llcc0_base + - const: llcc1_base + - const: llcc2_base + - const: llcc3_base + - const: llcc4_base + - const: llcc5_base + - const: llcc6_base + - const: llcc7_base + - const: llcc_broadcast_base + + - if: + properties: + compatible: + contains: + enum: - qcom,x1e80100-llcc then: properties: @@ -148,6 +178,7 @@ allOf: - description: LLCC6 base register region - description: LLCC7 base register region - description: LLCC broadcast base register region + - description: LLCC broadcast AND register region reg-names: items: - const: llcc0_base @@ -159,6 +190,7 @@ allOf: - const: llcc6_base - const: llcc7_base - const: llcc_broadcast_base + - const: llcc_broadcast_and_base - if: properties: diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index ea700f8ee6c6..fde5160b5d29 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -32,10 +32,9 @@ properties: The first item in the array is for channels 0-31, the second is for channels 32-63, etc. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 1 - # Should be enough - maxItems: 255 + minItems: 1 + # Should be enough + maxItems: 255 dma-channels: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml index a41f9b9a196b..484f8babcda4 100644 --- a/Documentation/devicetree/bindings/example-schema.yaml +++ b/Documentation/devicetree/bindings/example-schema.yaml @@ -262,4 +262,5 @@ examples: reg-names = "core", "aux"; interrupts = <10>; interrupt-controller; + #interrupt-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt deleted file mode 100644 index 48478bc07e29..000000000000 --- a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt +++ /dev/null @@ -1,29 +0,0 @@ -Altera Passive Serial SPI FPGA Manager - -Altera FPGAs support a method of loading the bitstream over what is -referred to as "passive serial". -The passive serial link is not technically SPI, and might require extra -circuits in order to play nicely with other SPI slaves on the same bus. - -See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf - -Required properties: -- compatible: Must be one of the following: - "altr,fpga-passive-serial", - "altr,fpga-arria10-passive-serial" -- reg: SPI chip select of the FPGA -- nconfig-gpios: config pin (referred to as nCONFIG in the manual) -- nstat-gpios: status pin (referred to as nSTATUS in the manual) - -Optional properties: -- confd-gpios: confd pin (referred to as CONF_DONE in the manual) - -Example: - fpga: fpga@0 { - compatible = "altr,fpga-passive-serial"; - spi-max-frequency = <20000000>; - reg = <0>; - nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; - nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; - confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml new file mode 100644 index 000000000000..ffb7cc54556f --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/altr,fpga-passive-serial.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera Passive Serial SPI FPGA Manager + +maintainers: + - Fabio Estevam <festevam@denx.de> + +description: | + Altera FPGAs support a method of loading the bitstream over what is + referred to as "passive serial". + The passive serial link is not technically SPI, and might require extra + circuits in order to play nicely with other SPI slaves on the same bus. + + See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - altr,fpga-passive-serial + - altr,fpga-arria10-passive-serial + + spi-max-frequency: + maximum: 20000000 + + reg: + maxItems: 1 + + nconfig-gpios: + description: + Config pin (referred to as nCONFIG in the manual). + maxItems: 1 + + nstat-gpios: + description: + Status pin (referred to as nSTATUS in the manual). + maxItems: 1 + + confd-gpios: + description: + confd pin (referred to as CONF_DONE in the manual) + maxItems: 1 + +required: + - compatible + - reg + - nconfig-gpios + - nstat-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + fpga@0 { + compatible = "altr,fpga-passive-serial"; + reg = <0>; + nconfig-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + nstat-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + confd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt deleted file mode 100644 index 43ef770dfeb9..000000000000 --- a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt +++ /dev/null @@ -1,22 +0,0 @@ -Zodiac Inflight Innovations RAVE Supervisory Processor Power Button Bindings - -RAVE SP input device is a "MFD cell" device corresponding to power -button functionality of RAVE Supervisory Processor. It is expected -that its Device Tree node is specified as a child of the node -corresponding to the parent RAVE SP device (as documented in -Documentation/devicetree/bindings/mfd/zii,rave-sp.txt) - -Required properties: - -- compatible: Should be "zii,rave-sp-pwrbutton" - -Example: - - rave-sp { - compatible = "zii,rave-sp-rdu1"; - current-speed = <38400>; - - pwrbutton { - compatible = "zii,rave-sp-pwrbutton"; - }; - } diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml new file mode 100644 index 000000000000..b26e6fe174f2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/zii,rave-sp-pwrbutton.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Zodiac Inflight Innovations RAVE Supervisory Processor Power Button + +maintainers: + - Frank Li <Frank.li@nxp.com> + +description: + RAVE SP input device is a "MFD cell" device corresponding to power + button functionality of RAVE Supervisory Processor. It is expected + that its Device Tree node is specified as a child of the node + corresponding to the parent RAVE SP device (as documented in + Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml) + +properties: + compatible: + const: zii,rave-sp-pwrbutton + +required: + - compatible + +allOf: + - $ref: input.yaml + +unevaluatedProperties: false + +examples: + - | + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 5f051c666cbe..f3247a47f9ee 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -132,10 +132,9 @@ properties: Address property. Base address of an alias of the GICD region containing only the {SET,CLR}SPI registers to be used if isolation is required, and if supported by the HW. - $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 1 - maxItems: 2 + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - $ref: /schemas/types.yaml#/definitions/uint64 ppi-partitions: type: object @@ -223,9 +222,8 @@ patternProperties: (u32, u32) tuple describing the untranslated address and size of the pre-ITS window. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 2 - maxItems: 2 + minItems: 2 + maxItems: 2 required: - compatible diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml index 799ae5c3e32a..b5282c857f44 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml @@ -62,8 +62,6 @@ properties: - const: processor-a-side - const: processor-b-side - interrupt-controller: true - msi-controller: true "#msi-cells": @@ -73,7 +71,6 @@ required: - compatible - reg - interrupts - - interrupt-controller - msi-controller - "#msi-cells" @@ -88,7 +85,6 @@ examples: compatible = "fsl,imx6sx-mu-msi"; msi-controller; #msi-cells = <0>; - interrupt-controller; reg = <0x5d270000 0x10000>, /* A side */ <0x5d300000 0x |