diff options
60 files changed, 4450 insertions, 141 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt index 11d3056dc2bd..6ffe08778465 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt @@ -30,6 +30,10 @@ Raspberry Pi 2 Model B Required root node properties: compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; +Raspberry Pi 3 Model B +Required root node properties: +compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; + Raspberry Pi Compute Module Required root node properties: compatible = "raspberrypi,compute-module", "brcm,bcm2835"; diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index d9c2a37a4090..c860b245d8c8 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -10,6 +10,7 @@ compatible: Must contain one of "mediatek,mt6580" "mediatek,mt6589" "mediatek,mt6592" + "mediatek,mt6755" "mediatek,mt6795" "mediatek,mt7623" "mediatek,mt8127" @@ -31,6 +32,9 @@ Supported boards: - Evaluation board for MT6592: Required root node properties: - compatible = "mediatek,mt6592-evb", "mediatek,mt6592"; +- Evaluation phone for MT6755(Helio P10): + Required root node properties: + - compatible = "mediatek,mt6755-evb", "mediatek,mt6755"; - Evaluation board for MT6795(Helio X10): Required root node properties: - compatible = "mediatek,mt6795-evb", "mediatek,mt6795"; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 6adb9d549fce..1df32d339da5 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -29,6 +29,8 @@ SoCs: compatible = "renesas,r8a7794" - R-Car H3 (R8A77950) compatible = "renesas,r8a7795" + - R-Car M3-W (R8A77960) + compatible = "renesas,r8a7796" Boards: @@ -63,5 +65,7 @@ Boards: compatible = "renesas,porter", "renesas,r8a7791" - Salvator-X (RTP0RC7795SIPB0010S) compatible = "renesas,salvator-x", "renesas,r8a7795"; + - Salvator-X + compatible = "renesas,salvator-x", "renesas,r8a7796"; - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 87adfb227ca9..fedc213b5f1a 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -10,6 +10,7 @@ PHYs. Required properties: - compatible : compatible string, one of: - "allwinner,sun4i-a10-ahci" + - "brcm,iproc-ahci" - "hisilicon,hisi-ahci" - "cavium,octeon-7130-ahci" - "ibm,476gtr-ahci" diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt index 8cf564d083d2..9d1d72c65489 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -9,6 +9,7 @@ Required properties: "mediatek,mt8135-sysirq" "mediatek,mt8127-sysirq" "mediatek,mt6795-sysirq" + "mediatek,mt6755-sysirq" "mediatek,mt6592-sysirq" "mediatek,mt6589-sysirq" "mediatek,mt6582-sysirq" diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index 05f705e32a4a..e41b2d59ca7f 100644 --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -59,8 +59,8 @@ Example: compatible = "apm,xgene-enet"; status = "disabled"; reg = <0x0 0x17020000 0x0 0xd100>, - <0x0 0X17030000 0x0 0X400>, - <0x0 0X10000000 0x0 0X200>; + <0x0 0x17030000 0x0 0x400>, + <0x0 0x10000000 0x0 0x200>; reg-names = "enet_csr", "ring_csr", "ring_cmd"; interrupts = <0x0 0x3c 0x4>; port-id = <0>; diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index ef683b2fd23a..41e9f55a1467 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -24,6 +24,9 @@ Required properties: The first entry must be a link to the SCFG device node The second entry must be '0' or '1' based on physical PCIe controller index. This is used to get SCFG PEXN registers +- dma-coherent: Indicates that the hardware IP block can ensure the coherency + of the data transferred from/to the IP block. This can avoid the software + cache flush/invalid actions, and improve the performance significantly. Example: @@ -38,6 +41,7 @@ Example: #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + dma-coherent; num-lanes = <4>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 32f4a2d6d0b3..fe7fe0b03cfb 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -5,6 +5,8 @@ Required properties for the root node: "amlogic,meson8b-cbus-pinctrl" "amlogic,meson8-aobus-pinctrl" "amlogic,meson8b-aobus-pinctrl" + "amlogic,meson-gxbb-periphs-pinctrl" + "amlogic,meson-gxbb-aobus-pinctrl" - reg: address and size of registers controlling irq functionality === GPIO sub-nodes === diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.txt b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.txt new file mode 100644 index 000000000000..202f2d09a23f --- /dev/null +++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.txt @@ -0,0 +1,14 @@ +Amlogic Meson Random number generator +===================================== + +Required properties: + +- compatible : should be "amlogic,meson-rng" +- reg : Specifies base physical address and size of the registers. + +Example: + +rng { + compatible = "amlogic,meson-rng"; + reg = <0x0 0xc8834000 0x0 0x4>; +}; diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index e99e10ab9ecb..0015c722be7b 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -6,6 +6,7 @@ Required properties: * "mediatek,mt6580-uart" for MT6580 compatible UARTS * "mediatek,mt6582-uart" for MT6582 compatible UARTS * "mediatek,mt6589-uart" for MT6589 compatible UARTS + * "mediatek,mt6755-uart" for MT6755 compatible UARTS * "mediatek,mt6795-uart" for MT6795 compatible UARTS * "mediatek,mt7623-uart" for MT7623 compatible UARTS * "mediatek,mt8127-uart" for MT8127 compatible UARTS diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index ca196d8e76f2..bb2616b16157 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -140,6 +140,12 @@ config ARCH_R8A7795 help This enables support for the Renesas R-Car H3 SoC. +config ARCH_R8A7796 + bool "Renesas R-Car M3-W SoC Platform" + depends on ARCH_RENESAS + help + This enables support for the Renesas R-Car M3-W SoC. + config ARCH_STRATIX10 bool "Altera's Stratix 10 SoCFPGA Family" help diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 7f2c6747a71e..90a84c514d3d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -45,6 +45,7 @@ /dts-v1/; #include "meson-gxbb.dtsi" +#include <dt-bindings/gpio/gpio.h> / { compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; @@ -62,8 +63,27 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + leds { + compatible = "gpio-leds"; + blue { + label = "c2:blue:alive"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; }; &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; }; + diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index bf7ff1d41851..f4f30f674b4c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -62,4 +62,13 @@ /* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; +}; + diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 012cdccc8a35..54bb7c739089 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -56,4 +56,7 @@ &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; + }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 832815d80462..e502c24b0ac7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -43,6 +43,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/meson-gxbb-gpio.h> +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> / { compatible = "amlogic,meson-gxbb"; @@ -129,13 +131,35 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + reset: reset-controller@4404 { + compatible = "amlogic,meson-gxbb-reset"; + reg = <0x0 0x04404 0x0 0x20>; + #reset-cells = <1>; + }; + uart_A: serial@84c0 { compatible = "amlogic,meson-uart"; - reg = <0x0 0x084c0 0x0 0x14>; + reg = <0x0 0x84c0 0x0 0x14>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>; status = "disabled"; }; + + uart_B: serial@84dc { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x84dc 0x0 0x14>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + uart_C: serial@8700 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x8700 0x0 0x14>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; }; gic: interrupt-controller@c4301000 { @@ -158,6 +182,29 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; + pinctrl_aobus: pinctrl@14 { + compatible = "amlogic,meson-gxbb-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + }; + uart_AO: serial@4c0 { compatible = "amlogic,meson-uart"; reg = <0x0 0x004c0 0x0 0x14>; @@ -167,6 +214,115 @@ }; }; + periphs: periphs@c8834000 { + compatible = "simple-bus"; + reg = <0x0 0xc8834000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; + + rng { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x0 0x0 0x4>; + }; + + pinctrl_periphs: pinctrl@4b0 { + compatible = "amlogic,meson-gxbb-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4b0 { + reg = <0x0 0x004b0 0x0 0x28>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00120 0x0 0x14>, + <0x0 0x00430 0x0 0x40>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + emmc_pins: emmc { + mux { + groups = "emmc_nand_d07", + "emmc_cmd", + "emmc_clk"; + function = "emmc"; + }; + }; + + sdcard_pins: sdcard { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_cmd", + "sdcard_clk"; + function = "sdcard"; + }; + }; + + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; + }; + }; + + uart_b_pins: uart_b { + mux { + groups = "uart_tx_b", + "uart_rx_b"; + function = "uart_b"; + }; + }; + + uart_c_pins: uart_c { + mux { + groups = "uart_tx_c", + "uart_rx_c"; + function = "uart_c"; + }; + }; + + eth_pins: eth_c { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_rxd2", + "eth_rxd3", + "eth_rgmii_tx_clk", + "eth_tx_en", + "eth_txd0", + "eth_txd1", + "eth_txd2", + "eth_txd3"; + function = "eth"; + }; + }; + }; + }; + + hiubus: hiubus@c883c000 { + compatible = "simple-bus"; + reg = <0x0 0xc883c000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + + clkc: clock-controller@0 { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; + }; + }; + apb: apb@d0000000 { compatible = "simple-bus"; reg = <0x0 0xd0000000 0x0 0x200000>; @@ -174,5 +330,17 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; }; + + ethmac: ethernet@c9410000 { + compatible = "amlogic,meson6-dwmac", "snps,dwmac"; + reg = <0x0 0xc9410000 0x0 0x10000 + 0x0 0xc8834540 0x0 0x4>; + interrupts = <0 8 1>; + interrupt-names = "macirq"; + clocks = <&xtal>; + clock-names = "stmmaceth"; + phy-mode = "rgmii"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index 2e1e5daa1dc7..1425ed41620c 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -106,88 +106,88 @@ interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */ ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */ reg = <0x0 0x78090000 0x0 0x10000>, /* GIC Dist */ - <0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */ - <0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */ - <0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */ - v2m0: v2m@0x00000 { + <0x0 0x780a0000 0x0 0x20000>, /* GIC CPU */ + <0x0 0x780c0000 0x0 0x10000>, /* GIC VCPU Control */ + <0x0 0x780e0000 0x0 0x20000>; /* GIC VCPU */ + v2m0: v2m@00000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x0 0x0 0x1000>; }; - v2m1: v2m@0x10000 { + v2m1: v2m@10000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x10000 0x0 0x1000>; }; - v2m2: v2m@0x20000 { + v2m2: v2m@20000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x20000 0x0 0x1000>; }; - v2m3: v2m@0x30000 { + v2m3: v2m@30000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x30000 0x0 0x1000>; }; - v2m4: v2m@0x40000 { + v2m4: v2m@40000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x40000 0x0 0x1000>; }; - v2m5: v2m@0x50000 { + v2m5: v2m@50000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x50000 0x0 0x1000>; }; - v2m6: v2m@0x60000 { + v2m6: v2m@60000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x60000 0x0 0x1000>; }; - v2m7: v2m@0x70000 { + v2m7: v2m@70000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x70000 0x0 0x1000>; }; - v2m8: v2m@0x80000 { + v2m8: v2m@80000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x80000 0x0 0x1000>; }; - v2m9: v2m@0x90000 { + v2m9: v2m@90000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x90000 0x0 0x1000>; }; - v2m10: v2m@0xA0000 { + v2m10: v2m@a0000 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0x0 0xA0000 0x0 0x1000>; + reg = <0x0 0xa0000 0x0 0x1000>; }; |