diff options
Diffstat (limited to 'Documentation/devicetree')
4 files changed, 206 insertions, 72 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt deleted file mode 100644 index 265b223cd978..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt +++ /dev/null @@ -1,52 +0,0 @@ -RISC-V Hart-Level Interrupt Controller (HLIC) ---------------------------------------------- - -RISC-V cores include Control Status Registers (CSRs) which are local to each -CPU core (HART in RISC-V terminology) and can be read or written by software. -Some of these CSRs are used to control local interrupts connected to the core. -Every interrupt is ultimately routed through a hart's HLIC before it -interrupts that hart. - -The RISC-V supervisor ISA manual specifies three interrupt sources that are -attached to every HLIC: software interrupts, the timer interrupt, and external -interrupts. Software interrupts are used to send IPIs between cores. The -timer interrupt comes from an architecturally mandated real-time timer that is -controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External -interrupts connect all other device interrupts to the HLIC, which are routed -via the platform-level interrupt controller (PLIC). - -All RISC-V systems that conform to the supervisor ISA specification are -required to have a HLIC with these three interrupt sources present. Since the -interrupt map is defined by the ISA it's not listed in the HLIC's device tree -entry, though external interrupt controllers (like the PLIC, for example) will -need to define how their interrupts map to the relevant HLICs. This means -a PLIC interrupt property will typically list the HLICs for all present HARTs -in the system. - -Required properties: -- compatible : "riscv,cpu-intc" -- #interrupt-cells : should be <1>. The interrupt sources are defined by the - RISC-V supervisor ISA manual, with only the following three interrupts being - defined for supervisor mode: - - Source 1 is the supervisor software interrupt, which can be sent by an SBI - call and is reserved for use by software. - - Source 5 is the supervisor timer interrupt, which can be configured by - SBI calls and implements a one-shot timer. - - Source 9 is the supervisor external interrupt, which chains to all other - device interrupts. -- interrupt-controller : Identifies the node as an interrupt controller - -Furthermore, this interrupt-controller MUST be embedded inside the cpu -definition of the hart whose CSRs control these local interrupts. - -An example device tree entry for a HLIC is show below. - - cpu1: cpu@1 { - compatible = "riscv"; - ... - cpu1-intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc"; - interrupt-controller; - }; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml new file mode 100644 index 000000000000..83256cc0bd5c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,cpu-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Hart-Level Interrupt Controller (HLIC) + +description: + RISC-V cores include Control Status Registers (CSRs) which are local to + each CPU core (HART in RISC-V terminology) and can be read or written by + software. Some of these CSRs are used to control local interrupts connected + to the core. Every interrupt is ultimately routed through a hart's HLIC + before it interrupts that hart. + + The RISC-V supervisor ISA manual specifies three interrupt sources that are + attached to every HLIC namely software interrupts, the timer interrupt, and + external interrupts. Software interrupts are used to send IPIs between + cores. The timer interrupt comes from an architecturally mandated real- + time timer that is controlled via Supervisor Binary Interface (SBI) calls + and CSR reads. External interrupts connect all other device interrupts to + the HLIC, which are routed via the platform-level interrupt controller + (PLIC). + + All RISC-V systems that conform to the supervisor ISA specification are + required to have a HLIC with these three interrupt sources present. Since + the interrupt map is defined by the ISA it's not listed in the HLIC's device + tree entry, though external interrupt controllers (like the PLIC, for + example) will need to define how their interrupts map to the relevant HLICs. + This means a PLIC interrupt property will typically list the HLICs for all + present HARTs in the system. + +maintainers: + - Palmer Dabbelt <palmer@dabbelt.com> + - Paul Walmsley <paul.walmsley@sifive.com> + +properties: + compatible: + oneOf: + - items: + - const: andestech,cpu-intc + - const: riscv,cpu-intc + - const: riscv,cpu-intc + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: | + The interrupt sources are defined by the RISC-V supervisor ISA manual, + with only the following three interrupts being defined for + supervisor mode: + - Source 1 is the supervisor software interrupt, which can be sent by + an SBI call and is reserved for use by software. + - Source 5 is the supervisor timer interrupt, which can be configured + by SBI calls and implements a one-shot timer. + - Source 9 is the supervisor external interrupt, which chains to all + other device interrupts. + +required: + - compatible + - '#interrupt-cells' + - interrupt-controller + +additionalProperties: false + +examples: + - | + interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index d067f2a468ee..8edc8261241a 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -103,26 +103,7 @@ properties: interrupt-controller: type: object - additionalProperties: false - description: Describes the CPU's local interrupt controller - - properties: - '#interrupt-cells': - const: 1 - - compatible: - oneOf: - - items: - - const: andestech,cpu-intc - - const: riscv,cpu-intc - - const: riscv,cpu-intc - - interrupt-controller: true - - required: - - '#interrupt-cells' - - compatible - - interrupt-controller + $ref: /schemas/interrupt-controller/riscv,cpu-intc.yaml# cpu-idle-states: $ref: /schemas/types.yaml#/definitions/phandle-array diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml index 468c646247aa..a06dbc6b4928 100644 --- a/Documentation/devicetree/bindings/riscv/extensions.yaml +++ b/Documentation/devicetree/bindings/riscv/extensions.yaml @@ -177,6 +177,13 @@ properties: is supported as ratified at commit 5059e0ca641c ("update to ratified") of the riscv-zacas. + - const: zawrs + description: | + The Zawrs extension for entering a low-power state or for trapping + to a hypervisor while waiting on a store to a memory location, as + ratified in commit 98918c844281 ("Merge pull request #1217 from + riscv/zawrs") of riscv-isa-manual. + - const: zba description: | The standard Zba bit-manipulation extension for address generation @@ -220,6 +227,43 @@ properties: instructions as ratified at commit 6d33919 ("Merge pull request #158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip. + - const: zca + description: | + The Zca extension part of Zc* standard extensions for code size + reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on + RV64 as it contains no instructions") of riscv-code-size-reduction, + merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed + of zc.adoc to src tree."). + + - const: zcb + description: | + The Zcb extension part of Zc* standard extensions for code size + reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on + RV64 as it contains no instructions") of riscv-code-size-reduction, + merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed + of zc.adoc to src tree."). + + - const: zcd + description: | + The Zcd extension part of Zc* standard extensions for code size + reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on + RV64 as it contains no instructions") of riscv-code-size-reduction, + merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed + of zc.adoc to src tree."). + + - const: zcf + description: | + The Zcf extension part of Zc* standard extensions for code size + reduction, as ratified in commit 8be3419c1c0 ("Zcf doesn't exist on + RV64 as it contains no instructions") of riscv-code-size-reduction, + merged in the riscv-isa-manual by commit dbc79cf28a2 ("Initial seed + of zc.adoc to src tree."). + + - const: zcmop + description: + The standard Zcmop extension version 1.0, as ratified in commit + c732a4f39a4 ("Zcmop is ratified/1.0") of the riscv-isa-manual. + - const: zfa description: The standard Zfa extension for additional floating point @@ -363,6 +407,11 @@ properties: ratified in the 20191213 version of the unprivileged ISA specification. + - const: zimop + description: + The standard Zimop extension version 1.0, as ratified in commit + 58220614a5f ("Zimop is ratified/1.0") of the riscv-isa-manual. + - const: ztso description: The standard Ztso extension for total store ordering, as ratified @@ -381,6 +430,36 @@ properties: instructions, as ratified in commit 56ed795 ("Update riscv-crypto-spec-vector.adoc") of riscv-crypto. + - const: zve32f + description: + The standard Zve32f extension for embedded processors, as ratified + in commit 6f702a2 ("Vector extensions are now ratified") of + riscv-v-spec. + + - const: zve32x + description: + The standard Zve32x extension for embedded processors, as ratified + in commit 6f702a2 ("Vector extensions are now ratified") of + riscv-v-spec. + + - const: zve64d + description: + The standard Zve64d extension for embedded processors, as ratified + in commit 6f702a2 ("Vector extensions are now ratified") of + riscv-v-spec. + + - const: zve64f + description: + The standard Zve64f extension for embedded processors, as ratified + in commit 6f702a2 ("Vector extensions are now ratified") of + riscv-v-spec. + + - const: zve64x + description: + The standard Zve64x extension for embedded processors, as ratified + in commit 6f702a2 ("Vector extensions are now ratified") of + riscv-v-spec. + - const: zvfh description: The standard Zvfh extension for vectored half-precision @@ -484,5 +563,58 @@ properties: Registers in the AX45MP datasheet. https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf + allOf: + # Zcb depends on Zca + - if: + contains: + const: zcb + then: + contains: + const: zca + # Zcd depends on Zca and D + - if: + contains: + const: zcd + then: + allOf: + - contains: + const: zca + - contains: + const: d + # Zcf depends on Zca and F + - if: + contains: + const: zcf + then: + allOf: + - contains: + const: zca + - contains: + const: f + # Zcmop depends on Zca + - if: + contains: + const: zcmop + then: + contains: + const: zca + +allOf: + # Zcf extension does not exist on rv64 + - if: + properties: + riscv,isa-extensions: + contains: + const: zcf + riscv,isa-base: + contains: + const: rv64i + then: + properties: + riscv,isa-extensions: + not: + contains: + const: zcf + additionalProperties: true ... |