diff options
Diffstat (limited to 'Documentation')
64 files changed, 3226 insertions, 763 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator index 3731f6f29bcb..873ef1fc1569 100644 --- a/Documentation/ABI/testing/sysfs-class-regulator +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -3,8 +3,9 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called - state. This holds the regulator output state. + Some regulator directories will contain a field called + state. This reports the regulator enable status, for + regulators which can report that value. This will be one of the following strings: @@ -18,7 +19,8 @@ Description: 'disabled' means the regulator output is OFF and is not supplying power to the system.. - 'unknown' means software cannot determine the state. + 'unknown' means software cannot determine the state, or + the reported state is invalid. NOTE: this field can be used in conjunction with microvolts and microamps to determine regulator output levels. @@ -53,9 +55,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called microvolts. This holds the regulator output voltage setting - measured in microvolts (i.e. E-6 Volts). + measured in microvolts (i.e. E-6 Volts), for regulators + which can report that voltage. NOTE: This value should not be used to determine the regulator output voltage level as this value is the same regardless of @@ -67,9 +70,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called microamps. This holds the regulator output current limit - setting measured in microamps (i.e. E-6 Amps). + setting measured in microamps (i.e. E-6 Amps), for regulators + which can report that current. NOTE: This value should not be used to determine the regulator output current level as this value is the same regardless of @@ -81,8 +85,9 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called - opmode. This holds the regulator operating mode setting. + Some regulator directories will contain a field called + opmode. This holds the current regulator operating mode, + for regulators which can report it. The opmode value can be one of the following strings: @@ -92,7 +97,7 @@ Description: 'standby' 'unknown' - The modes are described in include/linux/regulator/regulator.h + The modes are described in include/linux/regulator/consumer.h NOTE: This value should not be used to determine the regulator output operating mode as this value is the same regardless of @@ -104,9 +109,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called min_microvolts. This holds the minimum safe working regulator - output voltage setting for this domain measured in microvolts. + output voltage setting for this domain measured in microvolts, + for regulators which support voltage constraints. NOTE: this will return the string 'constraint not defined' if the power domain has no min microvolts constraint defined by @@ -118,9 +124,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called max_microvolts. This holds the maximum safe working regulator - output voltage setting for this domain measured in microvolts. + output voltage setting for this domain measured in microvolts, + for regulators which support voltage constraints. NOTE: this will return the string 'constraint not defined' if the power domain has no max microvolts constraint defined by @@ -132,10 +139,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called min_microamps. This holds the minimum safe working regulator output current limit setting for this domain measured in - microamps. + microamps, for regulators which support current constraints. NOTE: this will return the string 'constraint not defined' if the power domain has no min microamps constraint defined by @@ -147,10 +154,10 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called max_microamps. This holds the maximum safe working regulator output current limit setting for this domain measured in - microamps. + microamps, for regulators which support current constraints. NOTE: this will return the string 'constraint not defined' if the power domain has no max microamps constraint defined by @@ -185,7 +192,7 @@ Date: April 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called requested_microamps. This holds the total requested load current in microamps for this regulator from all its consumer devices. @@ -204,125 +211,102 @@ Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_mem_microvolts. This holds the regulator output voltage setting for this domain measured in microvolts when - the system is suspended to memory. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to memory voltage defined by - platform code. + the system is suspended to memory, for voltage regulators + implementing suspend voltage configuration constraints. What: /sys/class/regulator/.../suspend_disk_microvolts Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_disk_microvolts. This holds the regulator output voltage setting for this domain measured in microvolts when - the system is suspended to disk. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to disk voltage defined by - platform code. + the system is suspended to disk, for voltage regulators + implementing suspend voltage configuration constraints. What: /sys/class/regulator/.../suspend_standby_microvolts Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_standby_microvolts. This holds the regulator output voltage setting for this domain measured in microvolts when - the system is suspended to standby. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to standby voltage defined by - platform code. + the system is suspended to standby, for voltage regulators + implementing suspend voltage configuration constraints. What: /sys/class/regulator/.../suspend_mem_mode Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_mem_mode. This holds the regulator operating mode setting for this domain when the system is suspended to - memory. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to memory mode defined by - platform code. + memory, for regulators implementing suspend mode + configuration constraints. What: /sys/class/regulator/.../suspend_disk_mode Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_disk_mode. This holds the regulator operating mode - setting for this domain when the system is suspended to disk. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to disk mode defined by - platform code. + setting for this domain when the system is suspended to disk, + for regulators implementing suspend mode configuration + constraints. What: /sys/class/regulator/.../suspend_standby_mode Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_standby_mode. This holds the regulator operating mode setting for this domain when the system is suspended to - standby. - - NOTE: this will return the string 'not defined' if - the power domain has no suspend to standby mode defined by - platform code. + standby, for regulators implementing suspend mode + configuration constraints. What: /sys/class/regulator/.../suspend_mem_state Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_mem_state. This holds the regulator operating state - when suspended to memory. - - This will be one of the following strings: + when suspended to memory, for regulators implementing suspend + configuration constraints. - 'enabled' - 'disabled' - 'not defined' + This will be one of the same strings reported by + the "state" attribute. What: /sys/class/regulator/.../suspend_disk_state Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_disk_state. This holds the regulator operating state - when suspended to disk. - - This will be one of the following strings: + when suspended to disk, for regulators implementing + suspend configuration constraints. - 'enabled' - 'disabled' - 'not defined' + This will be one of the same strings reported by + the "state" attribute. What: /sys/class/regulator/.../suspend_standby_state Date: May 2008 KernelVersion: 2.6.26 Contact: Liam Girdwood <lrg@slimlogic.co.uk> Description: - Each regulator directory will contain a field called + Some regulator directories will contain a field called suspend_standby_state. This holds the regulator operating - state when suspended to standby. - - This will be one of the following strings: + state when suspended to standby, for regulators implementing + suspend configuration constraints. - 'enabled' - 'disabled' - 'not defined' + This will be one of the same strings reported by + the "state" attribute. diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index b462bb149543..52441694fe03 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -170,16 +170,15 @@ Returns: 0 if successful and a negative error if not. u64 dma_get_required_mask(struct device *dev) -After setting the mask with dma_set_mask(), this API returns the -actual mask (within that already set) that the platform actually -requires to operate efficiently. Usually this means the returned mask +This API returns the mask that the platform requires to +operate efficiently. Usually this means the returned mask is the minimum required to cover all of memory. Examining the required mask gives drivers with variable descriptor sizes the opportunity to use smaller descriptors as necessary. Requesting the required mask does not alter the current mask. If you -wish to take advantage of it, you should issue another dma_set_mask() -call to lower the mask again. +wish to take advantage of it, you should issue a dma_set_mask() +call to set the mask to the value returned. Part Id - Streaming DMA mappings diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 0a08126d3094..dc3154e49279 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -12,7 +12,7 @@ DOCBOOKS := z8530book.xml mcabook.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml debugobjects.xml sh.xml + mac80211.xml debugobjects.xml sh.xml regulator.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/networking.tmpl b/Documentation/DocBook/networking.tmpl index 627707a3cb9d..59ad69a9d777 100644 --- a/Documentation/DocBook/networking.tmpl +++ b/Documentation/DocBook/networking.tmpl @@ -74,6 +74,14 @@ !Enet/sunrpc/rpcb_clnt.c !Enet/sunrpc/clnt.c </sect1> + <sect1><title>WiMAX</title> +!Enet/wimax/op-msg.c +!Enet/wimax/op-reset.c +!Enet/wimax/op-rfkill.c +!Enet/wimax/stack.c +!Iinclude/net/wimax.h +!Iinclude/linux/wimax.h + </sect1> </chapter> <chapter id="netdev"> diff --git a/Documentation/DocBook/regulator.tmpl b/Documentation/DocBook/regulator.tmpl new file mode 100644 index 000000000000..53f4f8d3b810 --- /dev/null +++ b/Documentation/DocBook/regulator.tmpl @@ -0,0 +1,304 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> + +<book id="regulator-api"> + <bookinfo> + <title>Voltage and current regulator API</title> + + <authorgroup> + <author> + <firstname>Liam</firstname> + <surname>Girdwood</surname> + <affiliation> + <address> + <email>lrg@slimlogic.co.uk</email> + </address> + </affiliation> + </author> + <author> + <firstname>Mark</firstname> + <surname>Brown</surname> + <affiliation> + <orgname>Wolfson Microelectronics</orgname> + <address> + <email>broonie@opensource.wolfsonmicro.com</email> + </address> + </affiliation> + </author> + </authorgroup> + + <copyright> + <year>2007-2008</year> + <holder>Wolfson Microelectronics</holder> + </copyright> + <copyright> + <year>2008</year> + <holder>Liam Girdwood</holder> + </copyright> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2 as published by the Free Software Foundation. + </para> + + <para> + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + </para> + + <para> + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + </para> + + <para> + For more details see the file COPYING in the source + distribution of Linux. + </para> + </legalnotice> + </bookinfo> + +<toc></toc> + + <chapter id="intro"> + <title>Introduction</title> + <para> + This framework is designed to provide a standard kernel + interface to control voltage and current regulators. + </para> + <para> + The intention is to allow systems to dynamically control + regulator power output in order to save power and prolong + battery life. This applies to both voltage regulators (where + voltage output is controllable) and current sinks (where current + limit is controllable). + </para> + <para> + Note that additional (and currently more complete) documentation + is available in the Linux kernel source under + <filename>Documentation/power/regulator</filename>. + </para> + + <sect1 id="glossary"> + <title>Glossary</title> + <para> + The regulator API uses a number of terms which may not be + familiar: + </para> + <glossary> + + <glossentry> + <glossterm>Regulator</glossterm> + <glossdef> + <para> + Electronic device that supplies power to other devices. Most + regulators can enable and disable their output and some can also + control their output voltage or current. + </para> + </glossdef> + </glossentry> + + <glossentry> + <glossterm>Consumer</glossterm> + <glossdef> + <para> + Electronic device which consumes power provided by a regulator. + These may either be static, requiring only a fixed supply, or + dynamic, requiring active management of the regulator at + runtime. + </para> + </glossdef> + </glossentry> + + <glossentry> + <glossterm>Power Domain</glossterm> + <glossdef> + <para> + The electronic circuit supplied by a given regulator, including + the regulator and all consumer devices. The configuration of + the regulator is shared between all the components in the + circuit. + </para> + </glossdef> + </glossentry> + + <glossentry> + <glossterm>Power Management Integrated Circuit</glossterm> + <acronym>PMIC</acronym> + <glossdef> + <para> + An IC which contains numerous regulators and often also other + subsystems. In an embedded system the primary PMIC is often + equivalent to a combination of the PSU and southbridge in a + desktop system. + </para> + </glossdef> + </glossentry> + </glossary> + </sect1> + </chapter> + + <chapter id="consumer"> + <title>Consumer driver interface</title> + <para> + This offers a similar API to the kernel clock framework. + Consumer drivers use <link + linkend='API-regulator-get'>get</link> and <link + linkend='API-regulator-put'>put</link> operations to acquire and + release regulators. Functions are + provided to <link linkend='API-regulator-enable'>e |