diff options
Diffstat (limited to 'arch/arm/kernel')
| -rw-r--r-- | arch/arm/kernel/asm-offsets.c | 11 | ||||
| -rw-r--r-- | arch/arm/kernel/hyp-stub.S | 39 | ||||
| -rw-r--r-- | arch/arm/kernel/vmlinux-xip.lds.S | 8 | ||||
| -rw-r--r-- | arch/arm/kernel/vmlinux.lds.S | 8 | ||||
| -rw-r--r-- | arch/arm/kernel/vmlinux.lds.h | 10 |
5 files changed, 8 insertions, 68 deletions
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index c773b829ee8e..c036a4a2f8e2 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -11,9 +11,6 @@ #include <linux/sched.h> #include <linux/mm.h> #include <linux/dma-mapping.h> -#ifdef CONFIG_KVM_ARM_HOST -#include <linux/kvm_host.h> -#endif #include <asm/cacheflush.h> #include <asm/glue-df.h> #include <asm/glue-pf.h> @@ -167,14 +164,6 @@ int main(void) DEFINE(CACHE_WRITEBACK_ORDER, __CACHE_WRITEBACK_ORDER); DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE); BLANK(); -#ifdef CONFIG_KVM_ARM_HOST - DEFINE(VCPU_GUEST_CTXT, offsetof(struct kvm_vcpu, arch.ctxt)); - DEFINE(VCPU_HOST_CTXT, offsetof(struct kvm_vcpu, arch.host_cpu_context)); - DEFINE(CPU_CTXT_VFP, offsetof(struct kvm_cpu_context, vfp)); - DEFINE(CPU_CTXT_GP_REGS, offsetof(struct kvm_cpu_context, gp_regs)); - DEFINE(GP_REGS_USR, offsetof(struct kvm_regs, usr_regs)); -#endif - BLANK(); #ifdef CONFIG_VDSO DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store)); #endif diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 6607fa817bba..26d8e03b1dd3 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -189,19 +189,19 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE ENDPROC(__hyp_stub_install_secondary) __hyp_stub_do_trap: +#ifdef ZIMAGE teq r0, #HVC_SET_VECTORS bne 1f + /* Only the ZIMAGE stubs can change the HYP vectors */ mcr p15, 4, r1, c12, c0, 0 @ set HVBAR b __hyp_stub_exit +#endif 1: teq r0, #HVC_SOFT_RESTART - bne 1f + bne 2f bx r1 -1: teq r0, #HVC_RESET_VECTORS - beq __hyp_stub_exit - - ldr r0, =HVC_STUB_ERR +2: ldr r0, =HVC_STUB_ERR __ERET __hyp_stub_exit: @@ -210,26 +210,9 @@ __hyp_stub_exit: ENDPROC(__hyp_stub_do_trap) /* - * __hyp_set_vectors: Call this after boot to set the initial hypervisor - * vectors as part of hypervisor installation. On an SMP system, this should - * be called on each CPU. - * - * r0 must be the physical address of the new vector table (which must lie in - * the bottom 4GB of physical address space. - * - * r0 must be 32-byte aligned. - * - * Before calling this, you must check that the stub hypervisor is installed - * everywhere, by waiting for any secondary CPUs to be brought up and then - * checking that BOOT_CPU_MODE_HAVE_HYP(__boot_cpu_mode) is true. - * - * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or - * something else went wrong... in such cases, trying to install a new - * hypervisor is unlikely to work as desired. - * - * When you call into your shiny new hypervisor, sp_hyp will contain junk, - * so you will need to set that to something sensible at the new hypervisor's - * initialisation entry point. + * __hyp_set_vectors is only used when ZIMAGE must bounce between HYP + * and SVC. For the kernel itself, the vectors are set once and for + * all by the stubs. */ ENTRY(__hyp_set_vectors) mov r1, r0 @@ -245,12 +228,6 @@ ENTRY(__hyp_soft_restart) ret lr ENDPROC(__hyp_soft_restart) -ENTRY(__hyp_reset_vectors) - mov r0, #HVC_RESET_VECTORS - __HVC(0) - ret lr -ENDPROC(__hyp_reset_vectors) - #ifndef ZIMAGE .align 2 .L__boot_cpu_mode_offset: diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index 21b8b271c80d..6d2be994ae58 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -162,14 +162,6 @@ SECTIONS ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") -/* - * The HYP init code can't be more than a page long, - * and should not cross a page boundary. - * The above comment applies as well. - */ -ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, - "HYP init code too big or misaligned") - #ifdef CONFIG_XIP_DEFLATED_DATA /* * The .bss is used as a stack area for __inflate_kernel_data() whose stack diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 319ccb10846a..88a720da443b 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -170,12 +170,4 @@ __start_rodata_section_aligned = ALIGN(__start_rodata, 1 << SECTION_SHIFT); ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") -/* - * The HYP init code can't be more than a page long, - * and should not cross a page boundary. - * The above comment applies as well. - */ -ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE, - "HYP init code too big or misaligned") - #endif /* CONFIG_XIP_KERNEL */ diff --git a/arch/arm/kernel/vmlinux.lds.h b/arch/arm/kernel/vmlinux.lds.h index 8247bc15addc..381a8e105fa5 100644 --- a/arch/arm/kernel/vmlinux.lds.h +++ b/arch/arm/kernel/vmlinux.lds.h @@ -31,20 +31,11 @@ *(.proc.info.init) \ __proc_info_end = .; -#define HYPERVISOR_TEXT \ - __hyp_text_start = .; \ - *(.hyp.text) \ - __hyp_text_end = .; - #define IDMAP_TEXT \ ALIGN_FUNCTION(); \ __idmap_text_start = .; \ *(.idmap.text) \ __idmap_text_end = .; \ - . = ALIGN(PAGE_SIZE); \ - __hyp_idmap_text_start = .; \ - *(.hyp.idmap.text) \ - __hyp_idmap_text_end = .; #define ARM_DISCARD \ *(.ARM.exidx.exit.text) \ @@ -72,7 +63,6 @@ SCHED_TEXT \ CPUIDLE_TEXT \ LOCK_TEXT \ - HYPERVISOR_TEXT \ KPROBES_TEXT \ *(.gnu.warning) \ *(.glue_7) \ |