diff options
Diffstat (limited to 'arch/mips/netlogic')
27 files changed, 0 insertions, 4771 deletions
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig deleted file mode 100644 index 412351c5acc6..000000000000 --- a/arch/mips/netlogic/Kconfig +++ /dev/null @@ -1,86 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -if NLM_XLP_BOARD || NLM_XLR_BOARD - -if NLM_XLP_BOARD -config DT_XLP_EVP - bool "Built-in device tree for XLP EVP boards" - default y - select BUILTIN_DTB - help - Add an FDT blob for XLP EVP boards into the kernel. - This DTB will be used if the firmware does not pass in a DTB - pointer to the kernel. The corresponding DTS file is at - arch/mips/netlogic/dts/xlp_evp.dts - -config DT_XLP_SVP - bool "Built-in device tree for XLP SVP boards" - default y - select BUILTIN_DTB - help - Add an FDT blob for XLP VP boards into the kernel. - This DTB will be used if the firmware does not pass in a DTB - pointer to the kernel. The corresponding DTS file is at - arch/mips/netlogic/dts/xlp_svp.dts - -config DT_XLP_FVP - bool "Built-in device tree for XLP FVP boards" - default y - select BUILTIN_DTB - help - Add an FDT blob for XLP FVP board into the kernel. - This DTB will be used if the firmware does not pass in a DTB - pointer to the kernel. The corresponding DTS file is at - arch/mips/netlogic/dts/xlp_fvp.dts - -config DT_XLP_GVP - bool "Built-in device tree for XLP GVP boards" - default y - select BUILTIN_DTB - help - Add an FDT blob for XLP GVP board into the kernel. - This DTB will be used if the firmware does not pass in a DTB - pointer to the kernel. The corresponding DTS file is at - arch/mips/netlogic/dts/xlp_gvp.dts - -config DT_XLP_RVP - bool "Built-in device tree for XLP RVP boards" - default y - help - Add an FDT blob for XLP RVP board into the kernel. - This DTB will be used if the firmware does not pass in a DTB - pointer to the kernel. The corresponding DTS file is at - arch/mips/netlogic/dts/xlp_rvp.dts - -config NLM_MULTINODE - bool "Support for multi-chip boards" - depends on NLM_XLP_BOARD - default n - help - Add support for boards with 2 or 4 XLPs connected over ICI. - -if NLM_MULTINODE -choice - prompt "Number of XLPs on the board" - default NLM_MULTINODE_2 - help - In the multi-node case, specify the number of SoCs on the board. - -config NLM_MULTINODE_2 - bool "Dual-XLP board" - help - Support boards with upto two XLPs connected over ICI. - -config NLM_MULTINODE_4 - bool "Quad-XLP board" - help - Support boards with upto four XLPs connected over ICI. - -endchoice - -endif -endif - -config NLM_COMMON - bool - -endif diff --git a/arch/mips/netlogic/Makefile b/arch/mips/netlogic/Makefile deleted file mode 100644 index c53561589db9..000000000000 --- a/arch/mips/netlogic/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_NLM_COMMON) += common/ -obj-$(CONFIG_CPU_XLR) += xlr/ -obj-$(CONFIG_CPU_XLP) += xlp/ diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform deleted file mode 100644 index 4195a097f5f2..000000000000 --- a/arch/mips/netlogic/Platform +++ /dev/null @@ -1,16 +0,0 @@ -# -# NETLOGIC includes -# -cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/mach-netlogic -cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic - -# -# use mips64 if xlr is not available -# -cflags-$(CONFIG_CPU_XLR) += $(call cc-option,-march=xlr,-march=mips64) -cflags-$(CONFIG_CPU_XLP) += $(call cc-option,-march=xlp,-march=mips64r2) - -# -# NETLOGIC processor support -# -load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000 diff --git a/arch/mips/netlogic/common/Makefile b/arch/mips/netlogic/common/Makefile deleted file mode 100644 index 89f6e3f39fed..000000000000 --- a/arch/mips/netlogic/common/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-y += irq.o time.o -obj-y += reset.o -obj-$(CONFIG_SMP) += smp.o smpboot.o -obj-$(CONFIG_EARLY_PRINTK) += earlycons.o diff --git a/arch/mips/netlogic/common/earlycons.c b/arch/mips/netlogic/common/earlycons.c deleted file mode 100644 index 8f5bc1597550..000000000000 --- a/arch/mips/netlogic/common/earlycons.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights - * reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the NetLogic - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/types.h> -#include <linux/serial_reg.h> - -#include <asm/mipsregs.h> -#include <asm/setup.h> -#include <asm/netlogic/haldefs.h> -#include <asm/netlogic/common.h> - -#if defined(CONFIG_CPU_XLP) -#include <asm/netlogic/xlp-hal/iomap.h> -#include <asm/netlogic/xlp-hal/xlp.h> -#include <asm/netlogic/xlp-hal/uart.h> -#elif defined(CONFIG_CPU_XLR) -#include <asm/netlogic/xlr/iomap.h> -#endif - -void prom_putchar(char c) -{ - uint64_t uartbase; - -#if defined(CONFIG_CPU_XLP) - uartbase = nlm_get_uart_regbase(0, 0); -#elif defined(CONFIG_CPU_XLR) - uartbase = nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET); -#endif - while ((nlm_read_reg(uartbase, UART_LSR) & UART_LSR_THRE) == 0) - ; - nlm_write_reg(uartbase, UART_TX, c); -} diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c deleted file mode 100644 index c25a2ce5e29f..000000000000 --- a/arch/mips/netlogic/common/irq.c +++ /dev/null @@ -1,350 +0,0 @@ -/* - * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights - * reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the NetLogic - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/linkage.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/irq.h> - -#include <linux/irqdomain.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/errno.h> -#include <asm/signal.h> -#include <asm/ptrace.h> -#include <asm/mipsregs.h> -#include <asm/thread_info.h> - -#include <asm/netlogic/mips-extns.h> -#include <asm/netlogic/interrupt.h> -#include <asm/netlogic/haldefs.h> -#include <asm/netlogic/common.h> - -#if defined(CONFIG_CPU_XLP) -#include <asm/netlogic/xlp-hal/iomap.h> -#include <asm/netlogic/xlp-hal/xlp.h> -#include <asm/netlogic/xlp-hal/pic.h> -#elif defined(CONFIG_CPU_XLR) -#include <asm/netlogic/xlr/iomap.h> -#include <asm/netlogic/xlr/pic.h> -#include <asm/netlogic/xlr/fmn.h> -#else -#error "Unknown CPU" -#endif - -#ifdef CONFIG_SMP -#define SMP_IRQ_MASK ((1ULL << IRQ_IPI_SMP_FUNCTION) | \ - (1ULL << IRQ_IPI_SMP_RESCHEDULE)) -#else -#define SMP_IRQ_MASK 0 -#endif -#define PERCPU_IRQ_MASK (SMP_IRQ_MASK | (1ull << IRQ_TIMER) | \ - (1ull << IRQ_FMN)) - -struct nlm_pic_irq { - void (*extra_ack)(struct irq_data *); - struct nlm_soc_info *node; - int picirq; - int irt; - int flags; -}; - -static void xlp_pic_enable(struct irq_data *d) -{ - unsigned long flags; - struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d); - - BUG_ON(!pd); - spin_lock_irqsave(&pd->node->piclock, flags); - nlm_pic_enable_irt(pd->node->picbase, pd->irt); - spin_unlock_irqrestore(&pd->node->piclock, flags); -} - -static void xlp_pic_disable(struct irq_data *d) -{ - struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d); - unsigned long flags; - - BUG_ON(!pd); - spin_lock_irqsave(&pd->node->piclock, flags); - nlm_pic_disable_irt(pd->node->picbase, pd->irt); - spin_unlock_irqrestore(&pd->node->piclock, flags); -} - -static void xlp_pic_mask_ack(struct irq_data *d) -{ - struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d); - - clear_c0_eimr(pd->picirq); - ack_c0_eirr(pd->picirq); -} - -static void xlp_pic_unmask(struct irq_data *d) -{ - struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d); - - BUG_ON(!pd); - - if (pd->extra_ack) - pd->extra_ack(d); - - /* re-enable the intr on this cpu */ - set_c0_eimr(pd->picirq); - - /* Ack is a single write, no need to lock */ - nlm_pic_ack(pd->node->picbase, pd->irt); -} - -static struct irq_chip xlp_pic = { - .name = "XLP-PIC", - .irq_enable = xlp_pic_enable, - .irq_disable = xlp_pic_disable, - .irq_mask_ack = xlp_pic_mask_ack, - .irq_unmask = xlp_pic_unmask, -}; - -static void cpuintr_disable(struct irq_data *d) -{ - clear_c0_eimr(d->irq); -} - -static void cpuintr_enable(struct irq_data *d) -{ - set_c0_eimr(d->irq); -} - -static void cpuintr_ack(struct irq_data *d) -{ - ack_c0_eirr(d->irq); -} - -/* - * Chip definition for CPU originated interrupts(timer, msg) and - * IPIs - */ -struct irq_chip nlm_cpu_intr = { - .name = "XLP-CPU-INTR", - .irq_enable = cpuintr_enable, - .irq_disable = cpuintr_disable, - .irq_mask = cpuintr_disable, - .irq_ack = cpuintr_ack, - .irq_eoi = cpuintr_enable, -}; - -static void __init nlm_init_percpu_irqs(void) -{ - int i; - - for (i = 0; i < PIC_IRT_FIRST_IRQ; i++) - irq_set_chip_and_handler(i, &nlm_cpu_intr, handle_percpu_irq); -#ifdef CONFIG_SMP - irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr, - nlm_smp_function_ipi_handler); - irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr, - nlm_smp_resched_ipi_handler); -#endif -} - - -void nlm_setup_pic_irq(int node, int picirq, int irq, int irt) -{ - struct nlm_pic_irq *pic_data; - int xirq; - - xirq = nlm_irq_to_xirq(node, irq); - pic_data = kzalloc(sizeof(*pic_data), GFP_KERNEL); - BUG_ON(pic_data == NULL); - pic_data->irt = irt; - pic_data->picirq = picirq; - pic_data->node = nlm_get_node(node); - irq_set_chip_and_handler(xirq, &xlp_pic, handle_level_irq); - irq_set_chip_data(xirq, pic_data); -} - -void nlm_set_pic_extra_ack(int node, int irq, void (*xack)(struct irq_data *)) -{ - struct nlm_pic_irq *pic_data; - int xirq; - - xirq = nlm_irq_to_xirq(node, irq); - pic_data = irq_get_chip_data(xirq); - if (WARN_ON(!pic_data)) - return; - pic_data->extra_ack = xack; -} - -static void nlm_init_node_irqs(int node) -{ - struct nlm_soc_info *nodep; - int i, irt; - - pr_info("Init IRQ for node %d\n", node); - nodep = nlm_get_node(node); - nodep->irqmask = PERCPU_IRQ_MASK; - for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) { - irt = nlm_irq_to_irt(i); - if (irt == -1) /* unused irq */ - continue; - nodep->irqmask |= 1ull << i; - if (irt == -2) /* not a direct PIC irq */ - continue; - - nlm_pic_init_irt(nodep->picbase, irt, i, - node * nlm_threads_per_node(), 0); - nlm_setup_pic_irq(node, i, i, irt); - } -} - -void nlm_smp_irq_init(int hwtid) -{ - int cpu, node; - - cpu = hwtid % nlm_threads_per_node(); - node = hwtid / nlm_threads_per_node(); - - if (cpu == 0 && node != 0) - nlm_init_node_irqs(node); - write_c0_eimr(nlm_get_node(node)->irqmask); -} - -asmlinkage void plat_irq_dispatch(void) -{ - uint64_t eirr; - int i, node; - - node = nlm_nodeid(); - eirr = read_c0_eirr_and_eimr(); - if (eirr == 0) - return; - - i = __ffs64(eirr); - /* per-CPU IRQs don't need translation */ - if (i < PIC_IRQ_BASE) { - do_IRQ(i); - return; - } - -#if defined(CONFIG_PCI_MSI) && defined(CONFIG_CPU_XLP) - /* PCI interrupts need a second level dispatch for MSI bits */ - if (i >= PIC_PCIE_LINK_MSI_IRQ(0) && i <= PIC_PCIE_LINK_MSI_IRQ(3)) { - nlm_dispatch_msi(node, i); - return; - } - if (i >= PIC_PCIE_MSIX_IRQ(0) && i <= PIC_PCIE_MSIX_IRQ(3)) { - nlm_dispatch_msix(node, i); - return; - } - -#endif - /* top level irq handling */ - do_IRQ(nlm_irq_to_xirq(node, i)); -} - -#ifdef CONFIG_CPU_XLP -static int __init xlp_of_pic_init(struct device_node *node, - struct device_node *parent) -{ - const int n_picirqs = PIC_IRT_LAST_IRQ - PIC_IRQ_BASE + 1; - struct irq_domain *xlp_pic_domain; - struct resource res; - int socid, ret, bus; - - /* we need a hack to get the PIC's SoC chip id */ - ret = of_address_to_resource(node, 0, &res); - if (ret < 0) { - pr_err("PIC %pOFn: reg property not found!\n", node); - return -EINVAL; - } - - if (cpu_is_xlp9xx()) { - bus = (res.start >> 20) & 0xf; - for (socid = 0; socid < NLM_NR_NODES; socid++) { - if (!nlm_node_present(socid)) - continue; - if (nlm_get_node(socid)->socbus == bus) - break; - } - if (socid == NLM_NR_NODES) { - pr_err("PIC %pOFn: Node mapping for bus %d not found!\n", - node, bus); - return -EINVAL; - } - } else { - socid = (res.start >> 18) & 0x3; - if (!nlm_node_present(socid)) { - pr_err("PIC %pOFn: node %d does not exist!\n", - node, socid); - return -EINVAL; - } - } - - if (!nlm_node_present(socid)) { - pr_err("PIC %pOFn: node %d does not exist!\n", node, socid); - return -EINVAL; - } - - xlp_pic_domain = irq_domain_add_legacy(node, n_picirqs, - nlm_irq_to_xirq(socid, PIC_IRQ_BASE), PIC_IRQ_BASE, - &irq_domain_simple_ops, NULL); - if (xlp_pic_domain == NULL) { - pr_err("PIC %pOFn: Creating legacy domain failed!\n", node); - return -EINVAL; - } - pr_info("Node %d: IRQ domain created for PIC@%pR\n", socid, &res); - return 0; -} - -static struct of_device_id __initdata xlp_pic_irq_ids[] = { - { .compatible = "netlogic,xlp-pic", .data = xlp_of_pic_init }, - {}, -}; -#endif - -void __init arch_init_irq(void) -{ - /* Initialize the irq descriptors */ - nlm_init_percpu_irqs(); - nlm_init_node_irqs(0); - write_c0_eimr(nlm_current_node()->irqmask); -#if defined(CONFIG_CPU_XLR) - nlm_setup_fmn_irq(); -#endif -#ifdef CONFIG_CPU_XLP - of_irq_init(xlp_pic_irq_ids); -#endif -} diff --git a/arch/mips/netlogic/common/reset.S b/arch/mips/netlogic/common/reset.S deleted file mode 100644 index c474981a6c0d..000000000000 --- a/arch/mips/netlogic/common/reset.S +++ /dev/null @@ -1,299 +0,0 @@ -/* - * Copyright 2003-2013 Broadcom Corporation. - * All Rights Reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the Broadcom - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - -#include <asm/asm.h> -#include <asm/asm-offsets.h> -#include <asm/cpu.h> -#include <asm/cacheops.h> -#include <asm/regdef.h> -#include <asm/mipsregs.h> -#include <asm/stackframe.h> -#include <asm/asmmacro.h> -#include <asm/addrspace.h> - -#include <asm/netlogic/common.h> - -#include <asm/netlogic/xlp-hal/iomap.h> -#include <asm/netlogic/xlp-hal/xlp.h> -#include <asm/netlogic/xlp-hal/sys.h> -#include <asm/netlogic/xlp-hal/cpucontrol.h> - -#define SYS_CPU_COHERENT_BASE CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \ - XLP_IO_SYS_OFFSET(0) + XLP_IO_PCI_HDRSZ + \ - SYS_CPU_NONCOHERENT_MODE * 4 - -/* Enable XLP features and workarounds in the LSU */ -.macro xlp_config_lsu - li t0, LSU_DEFEATURE - mfcr t1, t0 - - lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */ - or t1, t1, t2 - mtcr t1, t0 - - li t0, ICU_DEFEATURE - mfcr t1, t0 - ori t1, 0x1000 /* Enable Icache partitioning */ - mtcr t1, t0 - - li t0, SCHED_DEFEATURE - lui t1, 0x0100 /* Disable BRU accepting ALU ops */ - mtcr t1, t0 -.endm - -/* - * Allow access to physical mem >64G by enabling ELPA in PAGEGRAIN - * register. This is needed before going to C code since the SP can - * in this region. Called from all HW threads. - */ -.macro xlp_early_mmu_init - mfc0 t0, CP0_PAGEMASK, 1 - li t1, (1 << 29) /* ELPA bit */ - or t0, t1 - mtc0 t0, CP0_PAGEMASK, 1 -.endm - -/* - * L1D cache has to be flushed before enabling threads in XLP. - * On XLP8xx/XLP3xx, we do a low level flush using processor control - * registers. On XLPII CPUs, usual cache instructions work. - */ -.macro xlp_flush_l1_dcache - mfc0 t0, CP0_PRID - andi t0, t0, PRID_IMP_MASK - slt t1, t0, 0x1200 - beqz t1, 15f - nop - - /* XLP8xx low level cache flush */ - li t0, LSU_DEBUG_DATA0 - li t1, LSU_DEBUG_ADDR - li t2, 0 /* index */ - li t3, 0x1000 /* loop count */ -11: - sll v0, t2, 5 - mtcr zero, t0 - ori v1, v0, 0x3 /* way0 | write_enable | write_active */ - mtcr v1, t1 -12: - mfcr v1, t1 - andi v1, 0x1 /* wait for write_active == 0 */ - bnez v1, 12b - nop - mtcr zero, t0 - ori v1, v0, 0x7 /* way1 | write_enable | write_active */ - mtcr v1, t1 -13: - mfcr v1, t1 - andi v1, 0x1 /* wait for write_active == 0 */ - bnez v1, 13b - nop - addi t2, 1 - bne t3, t2, 11b - nop - b 17f - nop - - /* XLPII CPUs, Invalidate all 64k of L1 D-cache */ -15: - li t0, 0x80000000 - li t1, 0x80010000 -16: cache Index_Writeback_Inv_D, 0(t0) - addiu t0, t0, 32 - bne t0, t1, 16b - nop -17: -.endm - -/* - * nlm_reset_entry will be copied to the reset entry point for - * XLR and XLP. The XLP cores start here when they are woken up. This - * is also the NMI entry point. - * - * We use scratch reg 6/7 to save k0/k1 and check for NMI first. - * - * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS - * location, this will have the thread mask (used when core is woken up) - * and the current NMI handler in case we reached here for an NMI. - * - * When a core or thread is newly woken up, it marks itself ready and - * loops in a 'wait'. When the CPU really needs waking up, we send an NMI - * IPI to it, with the NMI handler set to prom_boot_secondary_cpus - */ - .set noreorder - .set noat - .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */ - -FEXPORT(nlm_reset_entry) - dmtc0 k0, $22, 6 - dmtc0 k1, $22, 7 - mfc0 k0, CP0_STATUS - li k1, 0x80000 - and k1, k0, k1 - beqz k1, 1f /* go to real reset entry */ - nop - li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */ - ld k0, BOOT_NMI_HANDLER(k1) - jr k0 - nop - -1: /* Entry point on core wakeup */ - mfc0 t0, CP0_PRID /* processor ID */ - andi t0, PRID_IMP_MASK - li t1, 0x1500 /* XLP 9xx */ - beq t0, t1, 2f /* does not need to set coherent */ - nop - - li t1, 0x1300 /* XLP 5xx */ - beq t0, t1, 2f /* does not need to set coherent */ - nop - - /* set bit in SYS coherent register for the core */ - mfc0 t0, CP0_EBASE - mfc0 t1, CP0_EBASE - srl t1, 5 - andi t1, 0x3 /* t1 <- node */ - li t2, 0x40000 - mul t3, t2, t1 /* t3 = node * 0x40000 */ - srl t0, t0, 2 - and t0, t0, 0x7 /* t0 <- core */ - li t1, 0x1 - sll t0, t1, t0 - nor t0, t0, zero /* t0 <- ~(1 << core) */ - li t2, SYS_CPU_COHERENT_BASE - add t2, t2, t3 /* t2 <- SYS offset for node */ - lw t1, 0(t2) - and t1, t1, t0 - sw t1, 0(t2) - - /* read back to ensure complete */ - lw t1, 0(t2) - sync - -2: - /* Configure LSU on Non-0 Cores. */ - xlp_config_lsu - /* FALL THROUGH */ - -/* - * Wake up sibling threads from the initial thread in a core. - */ -EXPORT(nlm_boot_siblings) - /* core L1D flush before enable threads */ - xlp_flush_l1_dcache - /* save ra and sp, will be used later (only for boot cpu) */ - dmtc0 ra, $22, 6 - dmtc0 sp, $22, 7 - /* Enable hw threads by writing to MAP_THREADMODE of the core */ - li t0, CKSEG1ADDR(RESET_DATA_PHYS) - lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */ - li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE) - mfcr t2, t0 - or t2, t2, t1 - mtcr t2, t0 - - /* - * The new hardware thread starts at the next instruction - * For all the cases other than core 0 thread 0, we will - * jump to the secondary wait function. - - * NOTE: All GPR contents are lost after the mtcr above! - */ - mfc0 v0, CP0_EBASE - andi v0, 0x3ff /* v0 <- node/core */ - - /* - * Errata: to avoid potential live lock, setup IFU_BRUB_RESERVE - * when running 4 threads per core - */ - andi v1, v0, 0x3 /* v1 <- thread id */ - bnez v1, 2f - nop - - /* thread 0 of each core. */ - li t0, CKSEG1ADDR(RESET_DATA_PHYS) - lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */ - subu t1, 0x3 /* 4-thread per core mode? */ - bnez t1, 2f - nop - - li t0, IFU_BRUB_RESERVE - li t1, 0x55 - mtcr t1, t0 - _ehb -2: - beqz v0, 4f /* boot cpu (cpuid == 0)? */ - nop - - /* setup status reg */ - move t1, zero -#ifdef CONFIG_64BIT - ori t1, ST0_KX -#endif - mtc0 t1, CP0_STATUS - - xlp_early_mmu_init - - /* mark CPU ready */ - li t3, CKSEG1ADDR(RESET_DATA_PHYS) - ADDIU t1, t3, BOOT_CPU_READY - sll v1, v0, 2 - PTR_ADDU t1, v1 - li t2, 1 - sw t2, 0(t1) - /* Wait until NMI hits */ -3: wait - b 3b - nop - - /* - * For the boot CPU, we have to restore ra and sp and return, rest - * of the registers will be restored by the caller - */ -4: - dmfc0 ra, $22, 6 - dmfc0 sp, $22, 7 - jr ra - nop -EXPORT(nlm_reset_entry_end) - -LEAF(nlm_init_boot_cpu) -#ifdef CONFIG_CPU_XLP - xlp_config_lsu - xlp_early_mmu_init -#endif - jr ra - nop -END(nlm_init_boot_cpu) diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c deleted file mode 100644 index 39a300bd6cc2..000000000000 --- a/arch/mips/netlogic/common/smp.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights - * reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the NetLogic - * license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/sched/task_stack.h> -#include <linux/smp.h> -#include <linux/irq.h> - -#include <asm/mmu_context.h> - -#include <asm/netlogic/interrupt.h> -#include <asm/netlogic/mips-extns.h> -#include <asm/netlogic/haldefs.h> -#include <asm/netlogic/common.h> - -#if defined(CONFIG_CPU_XLP) -#include <asm/netlogic/xlp-hal/iomap.h> -#include <asm/netlogic/xlp-hal/xlp.h> |