diff options
Diffstat (limited to 'arch')
43 files changed, 114 insertions, 3935 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c0d14b192b27..2366a7ffbd9f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -233,9 +233,6 @@ config ARCH_MAY_HAVE_PC_FDC config ARCH_SUPPORTS_UPROBES def_bool y -config ARCH_HAS_DMA_SET_COHERENT_MASK - bool - config GENERIC_ISA_DMA bool @@ -279,7 +276,7 @@ config PHYS_OFFSET hex "Physical address of main memory" if MMU depends on !ARM_PATCH_PHYS_VIRT default DRAM_BASE if !MMU - default 0x00000000 if ARCH_FOOTBRIDGE || ARCH_IXP4XX + default 0x00000000 if ARCH_FOOTBRIDGE default 0x10000000 if ARCH_OMAP1 || ARCH_RPC default 0x30000000 if ARCH_S3C24XX default 0xa0000000 if ARCH_IOP32X || ARCH_PXA @@ -307,6 +304,17 @@ config MMU Select if you want MMU-based virtualised addressing space support by paged memory management. If unsure, say 'Y'. +config ARM_SINGLE_ARMV7M + def_bool !MMU + select ARM_NVIC + select AUTO_ZRELADDR + select TIMER_OF + select COMMON_CLK + select CPU_V7M + select NO_IOPORT_MAP + select SPARSE_IRQ + select USE_OF + config ARCH_MMAP_RND_BITS_MIN default 8 @@ -321,12 +329,11 @@ config ARCH_MMAP_RND_BITS_MAX # choice prompt "ARM system type" - default ARM_SINGLE_ARMV7M if !MMU - default ARCH_MULTIPLATFORM if MMU + depends on MMU + default ARCH_MULTIPLATFORM config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" - depends on MMU select ARCH_FLATMEM_ENABLE select ARCH_SPARSEMEM_ENABLE select ARCH_SELECT_MEMORY_MODEL @@ -340,18 +347,6 @@ config ARCH_MULTIPLATFORM select SPARSE_IRQ select USE_OF -config ARM_SINGLE_ARMV7M - bool "ARMv7-M based platforms (Cortex-M0/M3/M4)" - depends on !MMU - select ARM_NVIC - select AUTO_ZRELADDR - select TIMER_OF - select COMMON_CLK - select CPU_V7M - select NO_IOPORT_MAP - select SPARSE_IRQ - select USE_OF - config ARCH_EP93XX bool "EP93xx-based" select ARCH_SPARSEMEM_ENABLE @@ -370,7 +365,6 @@ config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 select FOOTBRIDGE - select NEED_MACH_IO_H if !MMU select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip @@ -378,7 +372,6 @@ config ARCH_FOOTBRIDGE config ARCH_IOP32X bool "IOP32x-based" - depends on MMU select CPU_XSCALE select GPIO_IOP select GPIOLIB @@ -390,18 +383,15 @@ config ARCH_IOP32X config ARCH_IXP4XX bool "IXP4xx-based" - depends on MMU - select ARCH_HAS_DMA_SET_COHERENT_MASK select ARCH_SUPPORTS_BIG_ENDIAN + select ARM_PATCH_PHYS_VIRT select CPU_XSCALE - select DMABOUNCE if PCI select GPIO_IXP4XX select GPIOLIB select HAVE_PCI select IXP4XX_IRQ select IXP4XX_TIMER - # With the new PCI driver this is not needed - select NEED_MACH_IO_H if IXP4XX_PCI_LEGACY + select SPARSE_IRQ select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO help @@ -423,7 +413,6 @@ config ARCH_DOVE config ARCH_PXA bool "PXA2xx/PXA3xx-based" - depends on MMU select ARCH_MTD_XIP select ARM_CPU_SUSPEND if PM select AUTO_ZRELADDR @@ -442,7 +431,6 @@ config ARCH_PXA config ARCH_RPC bool "RiscPC" - depends on MMU depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000 select ARCH_ACORN select ARCH_MAY_HAVE_PC_FDC @@ -497,7 +485,6 @@ config ARCH_S3C24XX config ARCH_OMAP1 bool "TI OMAP1" - depends on MMU select ARCH_OMAP select CLKSRC_MMIO select GENERIC_IRQ_CHIP diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index dedaaae3d0d8..29b1f192afbb 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -41,8 +41,6 @@ CONFIG_MACH_EXEDA=y CONFIG_MACH_CM_X300=y CONFIG_MACH_CAPC7117=y CONFIG_ARCH_GUMSTIX=y -CONFIG_MACH_INTELMOTE2=y -CONFIG_MACH_STARGATE2=y CONFIG_MACH_XCEP=y CONFIG_TRIZEPS_PXA=y CONFIG_MACH_TRIZEPS4WL=y @@ -487,7 +485,6 @@ CONFIG_SND_SOC_ZYLONITE=m CONFIG_SND_PXA2XX_SOC_HX4700=m CONFIG_SND_PXA2XX_SOC_MAGICIAN=m CONFIG_SND_PXA2XX_SOC_MIOA701=m -CONFIG_SND_PXA2XX_SOC_IMOTE2=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_WM8978=m CONFIG_SND_SIMPLE_CARD=m diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 02f6b108fd5d..279810381256 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -63,6 +63,7 @@ config SOC_SAMA7G5 select HAVE_AT91_GENERATED_CLK select HAVE_AT91_SAM9X60_PLL select HAVE_AT91_UTMI + select PM_OPP select SOC_SAMA7 help Select this if you are using one of Microchip's SAMA7G5 family SoC. diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index dd6f4ce3f766..0fd609e26615 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -605,6 +605,30 @@ static void at91sam9_sdram_standby(void) at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); } +static void sama7g5_standby(void) +{ + int pwrtmg, ratio; + + pwrtmg = readl(soc_pm.data.ramc[0] + UDDRC_PWRCTL); + ratio = readl(soc_pm.data.pmc + AT91_PMC_RATIO); + + /* + * Place RAM into self-refresh after a maximum idle clocks. The maximum + * idle clocks is configured by bootloader in + * UDDRC_PWRMGT.SELFREF_TO_X32. + */ + writel(pwrtmg | UDDRC_PWRCTL_SELFREF_EN, + soc_pm.data.ramc[0] + UDDRC_PWRCTL); + /* Divide CPU clock by 16. */ + writel(ratio & ~AT91_PMC_RATIO_RATIO, soc_pm.data.pmc + AT91_PMC_RATIO); + + cpu_do_idle(); + + /* Restore previous configuration. */ + writel(ratio, soc_pm.data.pmc + AT91_PMC_RATIO); + writel(pwrtmg, soc_pm.data.ramc[0] + UDDRC_PWRCTL); +} + struct ramc_info { void (*idle)(void); unsigned int memctrl; @@ -615,6 +639,7 @@ static const struct ramc_info ramc_infos[] __initconst = { { .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC}, { .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR}, { .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR}, + { .idle = sama7g5_standby, }, }; static const struct of_device_id ramc_ids[] __initconst = { @@ -622,7 +647,7 @@ static const struct of_device_id ramc_ids[] __initconst = { { .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] }, { .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] }, { .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] }, - { .compatible = "microchip,sama7g5-uddrc", }, + { .compatible = "microchip,sama7g5-uddrc", .data = &ramc_infos[4], }, { /*sentinel*/ } }; diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index fdb4f63ecde4..abe4ced33eda 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -159,7 +159,7 @@ sr_ena_1: /* Switch to self-refresh. */ ldr tmp1, [r2, #UDDRC_PWRCTL] - orr tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW + orr tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW str tmp1, [r2, #UDDRC_PWRCTL] sr_ena_2: @@ -276,7 +276,7 @@ sr_dis_5: /* Trigger self-refresh exit. */ ldr tmp1, [r2, #UDDRC_PWRCTL] - bic tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW + bic tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW str tmp1, [r2, #UDDRC_PWRCTL] sr_dis_6: diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index bd3f82788ebc..8db655c3e321 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -185,7 +185,6 @@ config ARCH_BCM_53573 config ARCH_BCM_63XX bool "Broadcom BCM63xx DSL SoC" depends on ARCH_MULTI_V7 - depends on MMU select ARCH_HAS_RESET_CONTROLLER select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 31ccbcee2627..d36f6b8269c2 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -73,12 +73,12 @@ void __init dove_init_irq(void) /* * Initialize gpiolib for GPIOs 0-71. */ - orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, + orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, IRQ_DOVE_GPIO_START, gpio0_irqs); - orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, + orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 32, gpio1_irqs); - orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0, + orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 64, gpio2_irqs); } diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 2eaf2dbb8e81..2da5b60b59e2 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -60,8 +60,10 @@ static int exynos_cpu_boot(int cpu) /* * Exynos3250 doesn't need to send smc command for secondary CPU boot * because Exynos3250 removes WFE in secure mode. + * + * On Exynos5 devices the call is ignored by trustzone firmware. */ - if (soc_is_exynos3250()) + if (!soc_is_exynos4210() && !soc_is_exynos4412()) return 0; /* diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h index ecaf6e7388d9..985ad3a95671 100644 --- a/arch/arm/mach-footbridge/include/mach/hardware.h +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -21,32 +21,26 @@ * 0xf0000000 0x80000000 16MB ISA memory */ -#ifdef CONFIG_MMU -#define MMU_IO(a, b) (a) -#else -#define MMU_IO(a, b) (b) -#endif - #define XBUS_SIZE 0x00100000 -#define XBUS_BASE MMU_IO(0xff800000, 0x40000000) +#define XBUS_BASE 0xff800000 #define ARMCSR_SIZE 0x00100000 -#define ARMCSR_BASE MMU_IO(0xfe000000, 0x42000000) +#define ARMCSR_BASE 0xfe000000 #define WFLUSH_SIZE 0x00100000 -#define WFLUSH_BASE MMU_IO(0xfd000000, 0x78000000) +#define WFLUSH_BASE 0xfd000000 #define PCIIACK_SIZE 0x00100000 -#define PCIIACK_BASE MMU_IO(0xfc000000, 0x79000000) +#define PCIIACK_BASE 0xfc000000 #define PCICFG1_SIZE 0x01000000 -#define PCICFG1_BASE MMU_IO(0xfb000000, 0x7a000000) +#define PCICFG1_BASE 0xfb000000 #define PCICFG0_SIZE 0x01000000 -#define PCICFG0_BASE MMU_IO(0xfa000000, 0x7b000000) +#define PCICFG0_BASE 0xfa000000 #define PCIMEM_SIZE 0x01000000 -#define PCIMEM_BASE MMU_IO(0xf0000000, 0x80000000) +#define PCIMEM_BASE 0xf0000000 #define XBUS_CS2 0x40012000 diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h deleted file mode 100644 index 4e18b921373f..000000000000 --- a/arch/arm/mach-footbridge/include/mach/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-footbridge/include/mach/io.h - * - * Copyright (C) 1997-1999 Russell King - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* - * Translation of various i/o addresses to host addresses for !CONFIG_MMU - */ -#define PCIO_BASE 0x7c000000 -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) - -#endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index f296bac467c8..c5a59158722b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -227,6 +227,13 @@ config SOC_IMX7ULP help This enables support for Freescale i.MX7 Ultra Low Power processor. +config SOC_IMXRT + bool "i.MXRT support" + depends on ARM_SINGLE_ARMV7M + select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M + help + This enables support for Freescale i.MXRT Crossover processor. + config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC if ARCH_MULTI_V7 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index d5291ed9186a..6fb3965b9ae6 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -63,6 +63,8 @@ obj-$(CONFIG_SOC_IMX50) += mach-imx50.o obj-$(CONFIG_SOC_IMX51) += mach-imx51.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o +obj-$(CONFIG_SOC_IMXRT) += mach-imxrt.o + obj-$(CONFIG_SOC_VF610) += mach-vf610.o obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o diff --git a/arch/arm/mach-imx/mach-imxrt.c b/arch/arm/mach-imx/mach-imxrt.c new file mode 100644 index 000000000000..2063a3059c84 --- /dev/null +++ b/arch/arm/mach-imx/mach-imxrt.c @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include <linux/kernel.h> +#include <asm/mach/arch.h> +#include <asm/v7m.h> + +static const char *const imxrt_compat[] __initconst = { + "fsl,imxrt1050", + NULL +}; + +DT_MACHINE_START(IMXRTDT, "IMXRT (Device Tree Support)") + .dt_compat = imxrt_compat, + .restart = armv7m_restart, +MACHINE_END diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 63a0ca82659a..d61ea616cf8e 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -42,24 +42,12 @@ config INTEGRATOR_IMPD1 allows ARM(R) Ltd PrimeCells to be developed and evaluated. The IM-PD1 can be found on the Integrator/PP2 platform. -config INTEGRATOR_CM7TDMI - bool "Integrator/CM7TDMI core module" - depends on ARCH_INTEGRATOR_AP - depends on ARCH_MULTI_V4 && !MMU - select CPU_ARM7TDMI - config INTEGRATOR_CM720T bool "Integrator/CM720T core module" depends on ARCH_INTEGRATOR_AP depends on ARCH_MULTI_V4T select CPU_ARM720T -config INTEGRATOR_CM740T - bool "Integrator/CM740T core module" - depends on ARCH_INTEGRATOR_AP - depends on ARCH_MULTI_V4T && !MMU - select CPU_ARM740T - config INTEGRATOR_CM920T bool "Integrator/CM920T core module" depends on ARCH_INTEGRATOR_AP @@ -78,23 +66,6 @@ config INTEGRATOR_CM926EJS depends on ARCH_MULTI_V5 select CPU_ARM926T -config INTEGRATOR_CM940T - bool "Integrator/CM940T core module" - depends on ARCH_INTEGRATOR_AP - depends on ARCH_MULTI_V4T && !MMU - select CPU_ARM940T - -config INTEGRATOR_CM946ES - bool "Integrator/CM946E-S core module" - depends on ARCH_INTEGRATOR_AP - depends on ARCH_MULTI_V5 && !MMU - select CPU_ARM946E - -config INTEGRATOR_CM966ES - bool "Integrator/CM966E-S core module" - depends on ARCH_INTEGRATOR_AP - depends on BROKEN # no kernel support - config INTEGRATOR_CM10200E_REV0 bool "Integrator/CM10200E rev.0 core module" depends on ARCH_INTEGRATOR_AP && n @@ -127,7 +98,7 @@ config INTEGRATOR_CM1136JFS config ARCH_INTEGRATOR_CP bool "Support Integrator/CP platform" - depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6) + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_TIMER_SP804 select SERIAL_AMBA_PL011 if TTY select SERIAL_AMBA_PL011_CONSOLE if TTY @@ -135,12 +106,6 @@ config ARCH_INTEGRATOR_CP help Include support for the ARM(R) Integrator CP platform. -config INTEGRATOR_CT7T - bool "Integrator/CT7TD (ARM7TDMI) core tile" - depends on ARCH_INTEGRATOR_CP - depends on ARCH_MULTI_V4T && !MMU - select CPU_ARM7TDMI - config INTEGRATOR_CT926 bool "Integrator/CT926 (ARM926EJ-S) core tile" depends on ARCH_INTEGRATOR_CP diff --git a/arch/arm/mach-integrator/hardware.h b/arch/arm/mach-integrator/hardware.h index 4d6ade3dd4ee..81ce09e3ad45 100644 --- a/arch/arm/mach-integrator/hardware.h +++ b/arch/arm/mach-integrator/hardware.h @@ -16,12 +16,7 @@ #define IO_START INTEGRATOR_HDR_BASE // PA of IO /* macro to get at IO space when running virtually */ -#ifdef CONFIG_MMU #define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) -#else -#define IO_ADDRESS(x) (x) -#endif - #define __io_address(n) ((void __iomem *)IO_ADDRESS(n)) /* diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 4c787b4be62b..f41ba3f42fc8 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -17,63 +17,6 @@ config MACH_IXP4XX_OF help Say 'Y' here to support Device Tree-based IXP4xx platforms. -config MACH_GATEWAY7001 - bool "Gateway 7001" - depends on IXP4XX_PCI_LEGACY - help - Say 'Y' here if you want your kernel to support Gateway's - 7001 Access Point. For more information on this platform, - see http://openwrt.org - -config MACH_GORAMO_MLR - bool "GORAMO Multi Link Router" - depends on IXP4XX_PCI_LEGACY - help - Say 'Y' here if you want your kernel to support GORAMO - MultiLink router. - -config ARCH_PRPMC1100 - bool "PrPMC1100" - help - Say 'Y' here if you want your kernel to support the Motorola - PrPCM1100 Processor Mezanine Module. For more information on - this platform, see <file:Documentation/arm/ixp4xx.rst>. - -comment "IXP4xx Options" - -config IXP4XX_PCI_LEGACY - bool "IXP4xx legacy PCI driver support" - depends on PCI - help - Selects legacy PCI driver. - Not recommended for new development. - -config IXP4XX_INDIRECT_PCI - bool "Use indirect PCI memory access" - depends on IXP4XX_PCI_LEGACY - help - IXP4xx provides two methods of accessing PCI memory space: - - 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). - To access PCI via this space, we simply ioremap() the BAR - into the kernel and we can use the standard read[bwl]/write[bwl] - macros. This is the preferred method due to speed but it - limits the system to just 64MB of PCI memory. This can be - problematic if using video cards and other memory-heavy devices. - - 2) If > 64MB of memory space is required, the IXP4xx can be - configured to use indirect registers to access the whole PCI - memory space. This currently allows for up to 1 GB (0x10000000 - to 0x4FFFFFFF) of memory on the bus. The disadvantage of this - is that every PCI access requires three local register accesses - plus a spinlock, but in some cases the performance hit is - acceptable. In addition, you cannot mmap() PCI devices in this - case due to the indirect nature of the PCI window. - - By default, the direct method is used. Choose this option if you - need to use the indirect method instead. If you don't know - what you need, leave this option unselected. - endmenu endif diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index b241094c9649..3d1c9d854c7f 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -1,19 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the linux kernel. -# - -obj-pci-y := -obj-pci-n := - -# Device tree platform -obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o - -obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o - -obj-y += common.o - -obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o -obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o - -obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +obj-y += ixp4xx-of.o diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c deleted file mode 100644 index 893c19c254e3..000000000000 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ /dev/null @@ -1,451 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-ixp4xx/common-pci.c - * - * IXP4XX PCI routines for all platforms - * - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com> - * Copyright (C) 2003-2004 MontaVista Software, Inc. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/io.h> -#include <linux/export.h> -#include <asm/dma-mapping.h> - -#include <asm/cputype.h> -#include <asm/irq.h> -#include <linux/sizes.h> -#include <asm/mach/pci.h> -#include <mach/hardware.h> - - -/* - * IXP4xx PCI read function is dependent on whether we are - * running A0 or B0 (AppleGate) silicon. - */ -int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); - -/* - * Base address for PCI register region - */ -unsigned long ixp4xx_pci_reg_base = 0; - -/* - * PCI cfg an I/O routines are done by programming a - * command/byte enable register, and then read/writing - * the data from a data register. We need to ensure - * these transactions are atomic or we will end up - * with corrupt data on the bus or in a driver. - */ -static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock); - -/* - * Read from PCI config space - */ -static void crp_read(u32 ad_cbe, u32 *data) -{ - unsigned long flags; - raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); - *PCI_CRP_AD_CBE = ad_cbe; - *data = *PCI_CRP_RDATA; - raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); -} - -/* - * Write to PCI config space - */ -static void crp_write(u32 ad_cbe, u32 data) -{ - unsigned long flags; - raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); - *PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe; - *PCI_CRP_WDATA = data; - raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); -} - -static inline int check_master_abort(void) -{ - /* check Master Abort bit after access */ - unsigned long isr = *PCI_ISR; - - if (isr & PCI_ISR_PFE) { - /* make sure the Master Abort bit is reset */ - *PCI_ISR = PCI_ISR_PFE; - pr_debug("%s failed\n", __func__); - return 1; - } - - return 0; -} - -int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data) -{ - unsigned long flags; - int retval = 0; - int i; - - raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); - - *PCI_NP_AD = addr; - - /* - * PCI workaround - only works if NP PCI space reads have - * no side effects!!! Read 8 times. last one will be good. - */ - for (i = 0; i < 8; i++) { - *PCI_NP_CBE = cmd; - *data = *PCI_NP_RDATA; - *data = *PCI_NP_RDATA; - } - - if(check_master_abort()) - retval = 1; - - raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); - return retval; -} - -int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data) -{ - unsigned long flags; - int retval = 0; - - raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); - - *PCI_NP_AD = addr; - - /* set up and execute the read */ - *PCI_NP_CBE = cmd; - - /* the result of the read is now in NP_RDATA */ - *data = *PCI_NP_RDATA; - - if(check_master_abort()) - retval = 1; - - raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); - return retval; -} - -int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data) -{ - unsigned long flags; - int retval = 0; - - raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); - - *PCI_NP_AD = addr; - - /* set up the write */ |