diff options
Diffstat (limited to 'drivers/dma/pl330.c')
| -rw-r--r-- | drivers/dma/pl330.c | 964 |
1 files changed, 331 insertions, 633 deletions
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 73fa9b7a10ab..d5149aacd2fe 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -33,26 +33,15 @@ #define PL330_MAX_IRQS 32 #define PL330_MAX_PERI 32 -enum pl330_srccachectrl { - SCCTRL0, /* Noncacheable and nonbufferable */ - SCCTRL1, /* Bufferable only */ - SCCTRL2, /* Cacheable, but do not allocate */ - SCCTRL3, /* Cacheable and bufferable, but do not allocate */ - SINVALID1, - SINVALID2, - SCCTRL6, /* Cacheable write-through, allocate on reads only */ - SCCTRL7, /* Cacheable write-back, allocate on reads only */ -}; - -enum pl330_dstcachectrl { - DCCTRL0, /* Noncacheable and nonbufferable */ - DCCTRL1, /* Bufferable only */ - DCCTRL2, /* Cacheable, but do not allocate */ - DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1, /* AWCACHE = 0x1000 */ - DINVALID2, - DCCTRL6, /* Cacheable write-through, allocate on writes only */ - DCCTRL7, /* Cacheable write-back, allocate on writes only */ +enum pl330_cachectrl { + CCTRL0, /* Noncacheable and nonbufferable */ + CCTRL1, /* Bufferable only */ + CCTRL2, /* Cacheable, but do not allocate */ + CCTRL3, /* Cacheable and bufferable, but do not allocate */ + INVALID1, /* AWCACHE = 0x1000 */ + INVALID2, + CCTRL6, /* Cacheable write-through, allocate on writes only */ + CCTRL7, /* Cacheable write-back, allocate on writes only */ }; enum pl330_byteswap { @@ -63,13 +52,6 @@ enum pl330_byteswap { SWAP_16, }; -enum pl330_reqtype { - MEMTOMEM, - MEMTODEV, - DEVTOMEM, - DEVTODEV, -}; - /* Register and Bit field Definitions */ #define DS 0x0 #define DS_ST_STOP 0x0 @@ -263,9 +245,6 @@ enum pl330_reqtype { */ #define MCODE_BUFF_PER_REQ 256 -/* If the _pl330_req is available to the client */ -#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) - /* Use this _only_ to wait on transient states */ #define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); @@ -300,27 +279,6 @@ struct pl330_config { u32 irq_ns; }; -/* Handle to the DMAC provided to the PL330 core */ -struct pl330_info { - /* Owning device */ - struct device *dev; - /* Size of MicroCode buffers for each channel. */ - unsigned mcbufsz; - /* ioremap'ed address of PL330 registers. */ - void __iomem *base; - /* Client can freely use it. */ - void *client_data; - /* PL330 core data, Client must not touch it. */ - void *pl330_data; - /* Populated by the PL330 core driver during pl330_add */ - struct pl330_config pcfg; - /* - * If the DMAC has some reset mechanism, then the - * client may want to provide pointer to the method. - */ - void (*dmac_reset)(struct pl330_info *pi); -}; - /** * Request Configuration. * The PL330 core does not modify this and uses the last @@ -344,8 +302,8 @@ struct pl330_reqcfg { unsigned brst_len:5; unsigned brst_size:3; /* in power of 2 */ - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; + enum pl330_cachectrl dcctl; + enum pl330_cachectrl scctl; enum pl330_byteswap swap; struct pl330_config *pcfg; }; @@ -359,11 +317,6 @@ struct pl330_xfer { u32 dst_addr; /* Size to xfer */ u32 bytes; - /* - * Pointer to next xfer in the list. - * The last xfer in the req must point to NULL. - */ - struct pl330_xfer *next; }; /* The xfer callbacks are made with one of these arguments. */ @@ -376,67 +329,6 @@ enum pl330_op_err { PL330_ERR_FAIL, }; -/* A request defining Scatter-Gather List ending with NULL xfer. */ -struct pl330_req { - enum pl330_reqtype rqtype; - /* Index of peripheral for the xfer. */ - unsigned peri:5; - /* Unique token for this xfer, set by the client. */ - void *token; - /* Callback to be called after xfer. */ - void (*xfer_cb)(void *token, enum pl330_op_err err); - /* If NULL, req will be done at last set parameters. */ - struct pl330_reqcfg *cfg; - /* Pointer to first xfer in the request. */ - struct pl330_xfer *x; - /* Hook to attach to DMAC's list of reqs with due callback */ - struct list_head rqd; -}; - -/* - * To know the status of the channel and DMAC, the client - * provides a pointer to this structure. The PL330 core - * fills it with current information. - */ -struct pl330_chanstatus { - /* - * If the DMAC engine halted due to some error, - * the client should remove-add DMAC. - */ - bool dmac_halted; - /* - * If channel is halted due to some error, - * the client should ABORT/FLUSH and START the channel. - */ - bool faulting; - /* Location of last load */ - u32 src_addr; - /* Location of last store */ - u32 dst_addr; - /* - * Pointer to the currently active req, NULL if channel is - * inactive, even though the requests may be present. - */ - struct pl330_req *top_req; - /* Pointer to req waiting second in the queue if any. */ - struct pl330_req *wait_req; -}; - -enum pl330_chan_op { - /* Start the channel */ - PL330_OP_START, - /* Abort the active xfer */ - PL330_OP_ABORT, - /* Stop xfer and flush queue */ - PL330_OP_FLUSH, -}; - -struct _xfer_spec { - u32 ccr; - struct pl330_req *r; - struct pl330_xfer *x; -}; - enum dmamov_dst { SAR = 0, CCR, @@ -454,12 +346,12 @@ enum pl330_cond { ALWAYS, }; +struct dma_pl330_desc; + struct _pl330_req { u32 mc_bus; void *mc_cpu; - /* Number of bytes taken to setup MC for the req */ - u32 mc_len; - struct pl330_req *r; + struct dma_pl330_desc *desc; }; /* ToBeDone for tasklet */ @@ -491,30 +383,6 @@ enum pl330_dmac_state { DYING, }; -/* A DMAC */ -struct pl330_dmac { - spinlock_t lock; - /* Holds list of reqs with due callbacks */ - struct list_head req_done; - /* Pointer to platform specific stuff */ - struct pl330_info *pinfo; - /* Maximum possible events/irqs */ - int events[32]; - /* BUS address of MicroCode buffer */ - dma_addr_t mcode_bus; - /* CPU address of MicroCode buffer */ - void *mcode_cpu; - /* List of all Channel threads */ - struct pl330_thread *channels; - /* Pointer to the MANAGER thread */ - struct pl330_thread *manager; - /* To handle bad news in interrupt */ - struct tasklet_struct tasks; - struct _pl330_tbd dmac_tbd; - /* State of DMAC operation */ - enum pl330_dmac_state state; -}; - enum desc_status { /* In the DMAC pool */ FREE, @@ -555,15 +423,16 @@ struct dma_pl330_chan { * As the parent, this DMAC also provides descriptors * to the channel. */ - struct dma_pl330_dmac *dmac; + struct pl330_dmac *dmac; /* To protect channel manipulation */ spinlock_t lock; - /* Token of a hardware channel thread of PL330 DMAC - * NULL if the channel is available to be acquired. + /* + * Hardware channel thread of PL330 DMAC. NULL if the channel is + * available. */ - void *pl330_chid; + struct pl330_thread *thread; /* For D-to-M and M-to-D channels */ int burst_sz; /* the peripheral fifo width */ @@ -574,9 +443,7 @@ struct dma_pl330_chan { bool cyclic; }; -struct dma_pl330_dmac { - struct pl330_info pif; - +struct pl330_dmac { /* DMA-Engine Device */ struct dma_device ddma; @@ -588,6 +455,32 @@ struct dma_pl330_dmac { /* To protect desc_pool manipulation */ spinlock_t pool_lock; + /* Size of MicroCode buffers for each channel. */ + unsigned mcbufsz; + /* ioremap'ed address of PL330 registers. */ + void __iomem *base; + /* Populated by the PL330 core driver during pl330_add */ + struct pl330_config pcfg; + + spinlock_t lock; + /* Maximum possible events/irqs */ + int events[32]; + /* BUS address of MicroCode buffer */ + dma_addr_t mcode_bus; + /* CPU address of MicroCode buffer */ + void *mcode_cpu; + /* List of all Channel threads */ + struct pl330_thread *channels; + /* Pointer to the MANAGER thread */ + struct pl330_thread *manager; + /* To handle bad news in interrupt */ + struct tasklet_struct tasks; + struct _pl330_tbd dmac_tbd; + /* State of DMAC operation */ + enum pl330_dmac_state state; + /* Holds list of reqs with due callbacks */ + struct list_head req_done; + /* Peripheral channels connected to this DMAC */ unsigned int num_peripherals; struct dma_pl330_chan *peripherals; /* keep at end */ @@ -604,49 +497,43 @@ struct dma_pl330_desc { struct pl330_xfer px; struct pl330_reqcfg rqcfg; - struct pl330_req req; enum desc_status status; /* The channel which currently holds this desc */ struct dma_pl330_chan *pchan; + + enum dma_transfer_direction rqtype; + /* Index of peripheral for the xfer. */ + unsigned peri:5; + /* Hook to attach to DMAC's list of reqs with due callback */ + struct list_head rqd; }; -static inline void _callback(struct pl330_req *r, enum pl330_op_err err) -{ - if (r && r->xfer_cb) - r->xfer_cb(r->token, err); -} +struct _xfer_spec { + u32 ccr; + struct dma_pl330_desc *desc; +}; static inline bool _queue_empty(struct pl330_thread *thrd) { - return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) - ? true : false; + return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL; } static inline bool _queue_full(struct pl330_thread *thrd) { - return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) - ? false : true; + return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL; } static inline bool is_manager(struct pl330_thread *thrd) { - struct pl330_dmac *pl330 = thrd->dmac; - - /* MANAGER is indexed at the end */ - if (thrd->id == pl330->pinfo->pcfg.num_chan) - return true; - else - return false; + return thrd->dmac->manager == thrd; } /* If manager of the thread is in Non-Secure mode */ static inline bool _manager_ns(struct pl330_thread *thrd) { - struct pl330_dmac *pl330 = thrd->dmac; - - return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; + return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false; } static inline u32 get_revision(u32 periph_id) @@ -1004,7 +891,7 @@ static inline u32 _emit_GO(unsigned dry_run, u8 buf[], /* Returns Time-Out */ static bool _until_dmac_idle(struct pl330_thread *thrd) { - void __iomem *regs = thrd->dmac->pinfo->base; + void __iomem *regs = thrd->dmac->base; unsigned long loops = msecs_to_loops(5); do { @@ -1024,7 +911,7 @@ static bool _until_dmac_idle(struct pl330_thread *thrd) static inline void _execute_DBGINSN(struct pl330_thread *thrd, u8 insn[], bool as_manager) { - void __iomem *regs = thrd->dmac->pinfo->base; + void __iomem *regs = thrd->dmac->base; u32 val; val = (insn[0] << 16) | (insn[1] << 24); @@ -1039,7 +926,7 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd, /* If timed out due to halted state-machine */ if (_until_dmac_idle(thrd)) { - dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); + dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n"); return; } @@ -1047,25 +934,9 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd, writel(0, regs + DBGCMD); } -/* - * Mark a _pl330_req as free. - * We do it by writing DMAEND as the first instruction - * because no valid request is going to have DMAEND as - * its first instruction to execute. - */ -static void mark_free(struct pl330_thread *thrd, int idx) -{ - struct _pl330_req *req = &thrd->req[idx]; - - _emit_END(0, req->mc_cpu); - req->mc_len = 0; - - thrd->req_running = -1; -} - static inline u32 _state(struct pl330_thread *thrd) { - void __iomem *regs = thrd->dmac->pinfo->base; + void __iomem *regs = thrd->dmac->base; u32 val; if (is_manager(thrd)) @@ -1123,7 +994,7 @@ static inline u32 _state(struct pl330_thread *thrd) static void _stop(struct pl330_thread *thrd) { - void __iomem *regs = thrd->dmac->pinfo->base; + void __iomem *regs = thrd->dmac->base; u8 insn[6] = {0, 0, 0, 0, 0, 0}; if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) @@ -1146,9 +1017,9 @@ static void _stop(struct pl330_thread *thrd) /* Start doing req 'idx' of thread 'thrd' */ static bool _trigger(struct pl330_thread *thrd) { - void __iomem *regs = thrd->dmac->pinfo->base; + void __iomem *regs = thrd->dmac->base; struct _pl330_req *req; - struct pl330_req *r; + struct dma_pl330_desc *desc; struct _arg_GO go; unsigned ns; u8 insn[6] = {0, 0, 0, 0, 0, 0}; @@ -1159,32 +1030,27 @@ static bool _trigger(struct pl330_thread *thrd) return true; idx = 1 - thrd->lstenq; - if (!IS_FREE(&thrd->req[idx])) + if (thrd->req[idx].desc != NULL) { req = &thrd->req[idx]; - else { + } else { idx = thrd->lstenq; - if (!IS_FREE(&thrd->req[idx])) + if (thrd->req[idx].desc != NULL) req = &thrd->req[idx]; else req = NULL; } /* Return if no request */ - if (!req || !req->r) + if (!req) return true; - r = req->r; + desc = req->desc; - if (r->cfg) - ns = r->cfg->nonsecure ? 1 : 0; - else if (readl(regs + CS(thrd->id)) & CS_CNS) - ns = 1; - else - ns = 0; + ns = desc->rqcfg.nonsecure ? 1 : 0; /* See 'Abort Sources' point-4 at Page 2-25 */ if (_manager_ns(thrd) && !ns) - dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", + dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n", __func__, __LINE__); go.chan = thrd->id; @@ -1240,7 +1106,7 @@ static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], const struct _xfer_spec *pxs, int cyc) { int off = 0; - struct pl330_config *pcfg = pxs->r->cfg->pcfg; + struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg; /* check lock-up free version */ if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) { @@ -1266,10 +1132,10 @@ static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], int off = 0; while (cyc--) { - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri); + off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->desc->peri); off += _emit_ST(dry_run, &buf[off], ALWAYS); - off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri); } return off; @@ -1281,10 +1147,10 @@ static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], int off = 0; while (cyc--) { - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri); off += _emit_LD(dry_run, &buf[off], ALWAYS); - off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->desc->peri); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri); } return off; @@ -1295,14 +1161,14 @@ static int _bursts(unsigned dry_run, u8 buf[], { int off = 0; - switch (pxs->r->rqtype) { - case MEMTODEV: + switch (pxs->desc->rqtype) { + case DMA_MEM_TO_DEV: off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); break; - case DEVTOMEM: + case DMA_DEV_TO_MEM: off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); break; - case MEMTOMEM: + case DMA_MEM_TO_MEM: off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); break; default: @@ -1395,7 +1261,7 @@ static inline int _loop(unsigned dry_run, u8 buf[], static inline int _setup_loops(unsigned dry_run, u8 buf[], const struct _xfer_spec *pxs) { - struct pl330_xfer *x = pxs->x; + struct pl330_xfer *x = &pxs->desc->px; u32 ccr = pxs->ccr; unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); int off = 0; @@ -1412,7 +1278,7 @@ static inline int _setup_loops(unsigned dry_run, u8 buf[], static inline int _setup_xfer(unsigned dry_run, u8 buf[], const struct _xfer_spec *pxs) { - struct pl330_xfer *x = pxs->x; + struct pl330_xfer *x = &pxs->desc->px; int off = 0; /* DMAMOV SAR, x->src_addr */ @@ -1443,17 +1309,12 @@ static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, /* DMAMOV CCR, ccr */ off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); - x = pxs->r->x; - do { - /* Error if xfer length is not aligned at burst size */ - if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) - return -EINVAL; - - pxs->x = x; - off += _setup_xfer(dry_run, &buf[off], pxs); + x = &pxs->desc->px; + /* Error if xfer length is not aligned at burst size */ + if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) + return -EINVAL; - x = x->next; - } while (x); + off += _setup_xfer(dry_run, &buf[off], pxs); /* DMASEV peripheral/event */ off += _emit_SEV(dry_run, &buf[off], thrd->ev); @@ -1495,31 +1356,15 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) return ccr; } -static inline bool _is_valid(u32 ccr) -{ - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; - - dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; - scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; - - if (dcctl == DINVALID1 || dcctl == DINVALID2 - || scctl == SINVALID1 || scctl == SINVALID2) - return false; - else - return true; -} - /* * Submit a list of xfers after which the client wants notification. * Client is not notified after each xfer unit, just once after all * xfer units are done or some error occurs. */ -static int pl330_submit_req(void *ch_id, struct pl330_req *r) +static int pl330_submit_req(struct pl330_thread *thrd, + struct dma_pl330_desc *desc) { - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - struct pl330_info *pi; + struct pl330_dmac *pl330 = thrd->dmac; struct _xfer_spec xs; unsigned long flags; void __iomem *regs; @@ -1528,25 +1373,24 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r) int ret = 0; /* No Req or Unacquired Channel or DMAC */ - if (!r || !thrd || thrd->free) + if (!desc || !thrd || thrd->free) return -EINVAL; - pl330 = thrd->dmac; - pi = pl330->pinfo; - regs = pi->base; + regs = thrd->dmac->base; if (pl330->state == DYING || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { - dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", + dev_info(thrd->dmac->ddma.dev, "%s:%d\n", __func__, __LINE__); return -EAGAIN; } /* If request for non-existing peripheral */ - if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { - dev_info(thrd->dmac->pinfo->dev, + if (desc->rqtype != DMA_MEM_TO_MEM && + desc->peri >= pl330->pcfg.num_peri) { + dev_info(thrd->dmac->ddma.dev, "%s:%d Invalid peripheral(%u)!\n", - __func__, __LINE__, r->peri); + __func__, __LINE__, desc->peri); return -EINVAL; } @@ -1557,41 +1401,26 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r) goto xfer_exit; } + /* Prefer Secure Channel */ + if (!_manager_ns(thrd)) + desc->rqcfg.nonsecure = 0; + else + desc->rqcfg.nonsecure = 1; - /* Use last settings, if not provided */ - if (r->cfg) { - /* Prefer Secure Channel */ - if (!_manager_ns(thrd)) - r->cfg->nonsecure = 0; - else - r->cfg->nonsecure = 1; - - ccr = _prepare_ccr(r->cfg); - } else { - ccr = readl(regs + CC(thrd->id)); - } - - /* If this req doesn't have valid xfer settings */ - if (!_is_valid(ccr)) { - ret = -EINVAL; - dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", - __func__, __LINE__, ccr); - goto xfer_exit; - } + ccr = _prepare_ccr(&desc->rqcfg); - idx = IS_FREE(&thrd->req[0]) ? 0 : 1; + idx = thrd->req[0].desc == NULL ? 0 : 1; xs.ccr = ccr; - xs.r = r; + xs.desc = desc; /* First dry run to check if req is acceptable */ ret = _setup_req(1, thrd, idx, &xs); if (ret < 0) goto xfer_exit; - if (ret > pi->mcbufsz / 2) { - dev_info(thrd->dmac->pinfo->dev, - "%s:%d Trying increasing mcbufsz\n", + if (ret > pl330->mcbufsz / 2) { + dev_info(pl330->ddma.dev, "%s:%d Trying increasing mcbufsz\n", __func__, __LINE__); ret = -ENOMEM; goto xfer_exit; @@ -1599,8 +1428,8 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r) /* Hook the request */ thrd->lstenq = idx; - thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); - thrd->req[idx].r = r; + thrd->req[idx].desc = desc; + _setup_req(0, thrd, idx, &xs); ret = 0; @@ -1610,10 +1439,32 @@ xfer_exit: return ret; } +static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err) +{ + struct dma_pl330_chan *pch; + unsigned long flags; + + if (!desc) + return; + + pch = desc->pchan; + + /* If desc aborted */ + if (!pch) + return; + + spin_lock_irqsave(&pch->lock, flags); + + desc->status = DONE; + + spin_unlock_irqrestore(&pch->lock, flags); + + tasklet_schedule(&pch->task); +} + static void pl330_dotask(unsigned long data) { struct pl330_dmac *pl330 = (struct pl330_dmac *) data; - struct pl330_info *pi = pl330->pinfo; unsigned long flags; int i; @@ -1631,16 +1482,16 @@ static void pl330_dotask(unsigned long data) if (pl330->dmac_tbd.reset_mngr) { _stop(pl330->manager); /* Reset all channels */ - pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; + pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1; /* Clear the reset flag */ pl330->dmac_tbd.reset_mngr = false; } - for (i = 0; i < pi->pcfg.num_chan; i++) { + for (i = 0; i < pl330->pcfg.num_chan; i++) { if (pl330->dmac_tbd.reset_chan & (1 << i)) { struct pl330_thread *thrd = &pl330->channels[i]; - void __iomem *regs = pi->base; + void __iomem *regs = pl330->base; enum pl330_op_err err; _stop(thrd); @@ -1651,16 +1502,13 @@ static void pl330_dotask(unsigned long data) err = PL330_ERR_ABORT; spin_unlock_irqrestore(&pl330->lock, flags); - - _callback(thrd->req[1 - thrd->lstenq].r, err); - _callback(thrd->req[thrd->lstenq].r, err); - + dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err); + dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err); spin_lock_irqsave(&pl330->lock, flags); - thrd->req[0].r = NULL; - thrd->req[1].r = NULL; - mark_free(thrd, 0); - mark_free(thrd, 1); + thrd->req[0].desc = NULL; + thrd->req[1].desc = NULL; + thrd->req_running = -1; /* Clear the reset flag */ pl330->dmac_tbd.reset_chan &= ~(1 << i); @@ -1673,20 +1521,15 @@ static void pl330_dotask(unsigned long data) } /* Returns 1 if state was updated, 0 otherwise */ -static int pl330_update(const struct pl330_info *pi) +static int pl330_update(struct pl330_dmac *pl330) { - struct pl330_req *rqdone, *tmp; - struct pl330_dmac *pl330; + struct dma_pl330_desc *descdone, *tmp; unsigned long flags; void __iomem *regs; u32 val; int id, ev, ret = 0; - if (!pi || !pi->pl330_data) - return 0; - - regs = pi->base; - pl330 = pi->pl330_data; + regs = pl330->base; spin_lock_irqsave(&pl330->lock, flags); @@ -1696,13 +1539,13 @@ static int pl330_update(const struct pl330_info *pi) else pl330->dmac_tbd.reset_mngr = false; - val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); + val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1); pl330->dmac_tbd.reset_chan |= val; if (val) { int i = 0; - while (i < pi->pcfg.num_chan) { + while (i < pl330->pcfg.num_chan) { if (val & (1 << i)) { - dev_info(pi->dev, + dev_info(pl330->ddma.dev, "Reset Channel-%d\t CS-%x FTC-%x\n", i, readl(regs + CS(i)), readl(regs + FTC(i))); @@ -1714,15 +1557,16 @@ static int pl330_update(const struct pl330_info *pi) /* Check which event happened i.e, thread notified */ val = readl(regs + ES); - if (pi->pcfg.num_events < 32 - && val & ~((1 << pi->pcfg.num_events) - 1)) { + if (pl330->pcfg.num_events < 32 + && val & ~((1 << pl330->pcfg.num_events) - 1)) { pl330->dmac_tbd.reset_dmac = true; - dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); + dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__, + __LINE__); ret = 1; goto updt_exit; } - for (ev = 0; ev < pi->pcfg.num_events; ev++) { + for (ev = 0; ev < pl330->pcfg.num_events; ev++) { if (val & (1 << ev)) { /* Event occurred */ struct pl330_thread *thrd; u32 inten = readl(regs + INTEN); @@ -1743,25 +1587,22 @@ static int pl330_update(const struct pl330_info *pi) continue; /* Detach the req */ - rqdone = thrd->req[active].r; - thrd->req[active].r = NULL; - - mark_free(thrd, active); + descdone = thrd->req[active].desc; + thrd->req[active].desc = NULL; /* Get going again ASAP */ _start(thrd); /* For now, just make a list of callbacks to be done */ - list_add_tail(&rqdone->rqd, &pl330->req_done); + list_add_tail(&descdone->rqd, &pl330->req_done); } } /* Now that we are in no hurry, do the callbacks */ - list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) { - list_del(&rqdone->rqd); - + list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) { + list_del(&descdone->rqd); spin_unlock_irqrestore(&pl330->lock, flags); - _callback(rqdone, PL330_ERR_NONE); + dma_pl330_rqcb(descdone, PL330_ERR_NONE); spin_lock_irqsave(&pl330->lock, flags); } @@ -1778,65 +1619,13 @@ updt_exit: return ret; } -static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - unsigned long flags; - int ret = 0, active; - - if (!thrd || thrd->free || thrd->dmac->state == DYING) - return -EINVAL; - - pl330 = thrd->dmac; - active = thrd->req_running; - - spin_lock_irqsave(&pl330->lock, flags); - - switch (op) { - case PL330_OP_FLUSH: - /* Make sure the channel is stopped */ - _stop(thrd); - - thrd->req[0].r = NULL; - thrd->req[1].r = NULL; - mark_free(thrd, 0); - mark_free(thrd, 1); - break; - - case PL330_OP_ABORT: - /* Make sure the channel is stopped */ - _stop(thrd); - - /* ABORT is only for the active req */ - if (active == -1) - break; - - thrd->req[active].r = NULL; - mark_free(thrd, active); - - /* Start the next */ - case PL330_OP_START: - if ((active == -1) && !_start(thrd)) - ret = -EIO; - break; - - default: - ret = -EINVAL; - } - - spin_unlock_irqrestore(&pl330->lock, flags); - return ret; -} - /* Reserve an event */ static inline int _alloc_event(struct pl330_thread *thrd) { struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; int ev; - for (ev = 0; ev < pi->pcfg.num_events; ev++) + for (ev = 0; ev < pl330->pcfg.num_events; ev++) if (pl330->events[ev] == -1) { pl330->events[ev] = thrd->id; return ev; @@ -1845,45 +1634,38 @@ static inline int _alloc_event(struct pl330_thread *thrd) return -1; } -static bool _chan_ns(const struct pl330_info *pi, int i) +static bool _chan_ns(const struct pl330_dmac *pl330, int i) { - return pi->pcfg.irq_ns & (1 << i); + return pl330->pcfg.irq_ns & (1 << i); } /* Upon success, returns IdentityToken for the * allocated channel, NULL otherwise. */ -static void *pl330_request_channel(const struct pl330_info *pi) +static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330) { struct pl330_thread *thrd = NULL; - struct pl330_dmac *pl330; unsigned long flags; int chans, i; - if (!pi || !pi->pl330_data) - return NULL; - - pl330 = pi->pl330_data; - if (pl330->state == DYING) return NULL; - chans = pi->pcfg.num_chan; + chans = pl330->pcfg.num_chan; spin_lock_irqsave(&pl330->lock, flags); for (i = 0; i < chans; i++) { thrd = &pl330->channels[i]; if ((thrd->free) && (!_manager_ns(thrd) || - _chan_ns(pi, i))) { + _chan_ns(pl330, i))) { thrd->ev = _alloc_event(thrd); if (thrd->ev >= 0) { thrd->free = false; thrd->lstenq = 1; - thrd->req[0].r = NULL; - mark_free(thrd, 0); - thrd->req[1].r = NULL; - mark_free(thrd, 1); + thrd->req[0].desc = NULL; + thrd->req[1].desc = NULL; + thrd->req_running = -1; break; } } @@ -1899,17 +1681,15 @@ static void *pl330_request_channel(const struct pl330_info *pi) static inline void _free_event(struct pl330_thread *thrd, int ev) { struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; /* If the event is valid and was held by the thread */ - if (ev >= 0 && ev < pi->pcfg.num_events + if (ev >= 0 && ev < pl330->pcfg.num_events && pl330->events[ev] == thrd->id) pl330->events[ev] = -1; } -static void pl330_release_channel(void *ch_id) +static void pl330_release_channel(struct pl330_thread *thrd) { - struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; @@ -1918,8 +1698,8 @@ static void pl330_release_channel(void *ch_id) _stop(thrd); - _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); - _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); + dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT); + dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT); pl330 = thrd->dmac; @@ -1932,72 +1712,70 @@ static void pl330_release_channel(void *ch_id) /* Initialize the structure for PL330 configuration, that can be used * by the client driver the make best use of the DMAC */ -static void read_dmac_config(struct pl330_info *pi) +static void read_dmac_config(struct pl330_dmac *pl330) { - void __iomem *regs = pi->base; + void __iomem *regs = pl330->base; u32 val; val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; val &= CRD_DATA_WIDTH_MASK; - pi->pcfg.data_bus_width = 8 * (1 << val); + pl330->pcfg.data_bus_width = 8 * (1 << val); val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; val &= CRD_DATA_BUFF_MASK; - pi->pcfg.data_buf_dep = val + 1; + pl330->pcfg.data_buf_dep = val + 1; val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; val &= CR0_NUM_CHANS_MASK; val += 1; - pi->pcfg.num_chan = val; + pl330->pcfg.num_chan = val; val = readl(regs + CR0); if (val & CR0_PERIPH_REQ_SET) { val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; val += 1; - pi->pcfg.num_peri = val; - pi->pcfg.peri_ns = readl(regs + CR4); + pl330->pcfg.num_peri = val; + pl330->pcfg.peri_ns = readl(regs + CR4); } else { - pi->pcfg.num_peri = 0; + pl330->pcfg.num_peri = 0; } val = readl(regs + CR0); if (val & CR0_BOOT_MAN_NS) - pi->pcfg.mode |= DMAC_MODE_NS; + pl330->pcfg.mode |= DMAC_MODE_NS; else - pi->pcfg.mode &= ~DMAC_MODE_NS; + pl330->pcfg.mode &= ~DMAC_MODE_NS; val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; val &= CR0_NUM_EVENTS_MASK; val += 1; - pi->pcfg.num_events = val; + pl330->pcfg.num_events = val; - pi->pcfg.irq_ns = readl(regs + CR3); + pl330->pcfg.irq_ns = readl(regs + CR3); } static inline void _reset_thread(struct pl330_thread *thrd) { struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; thrd->req[0].mc_cpu = pl330->mcode_cpu - + (thrd->id * pi->mcbufsz); + + (thrd->id * pl330->mcbufsz); thrd->req[0].mc_bus = pl330->mcode_bus - + (thrd->id * pi->mcbufsz); - thrd->req[0].r = NULL; - mark_free(thrd, 0); + + (thrd->id * pl330->mcbufsz); + thrd->req[0].desc = NULL; thrd->req[1].mc_cpu = thrd->req[0].mc_cpu - + pi->mcbufsz / 2; + + pl330->mcbufsz / 2; thrd->req[1].mc_bus = thrd->req[0].mc_bus - + pi->mcbufsz / 2; - thrd->req[1].r = NULL; - mark_free(thrd, 1); + + pl330->mcbufsz / 2; + thrd->req[1].desc = NULL; + + thrd->req_running = -1; } static int dmac_alloc_threads(struct pl330_dmac *pl330) { - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; + int chans = pl330->pcfg.num_chan; struct pl330_thread *thrd; int i; @@ -2028,29 +1806,28 @@ static int dmac_alloc_threads(struct pl330_dmac *pl330) static int dmac_alloc_resources(struct pl330_dmac *pl330) { - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; + int chans = pl330->pcfg.num_chan; int ret; /* * Alloc MicroCode buffer for 'chans' Channel threads. * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) */ - pl330->mcode_cpu = dma_alloc_coherent(pi->dev, - chans * pi->mcbufsz, + pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev, + chans * pl330->mcbufsz, &pl330->mcode_bus, GFP_KERNEL); if (!pl330->mcode_cpu) { - dev_err(pi->dev, "%s:%d Can't allocate memory!\n", + dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n", __func__, __LINE__); return -ENOMEM; } ret = dmac_alloc_threads(pl330); if (ret) { - dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", + dev_err(pl330-> |
