diff options
Diffstat (limited to 'drivers/iio')
83 files changed, 3818 insertions, 801 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index d4ef35aeb579..5d91a6dda894 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -89,13 +89,13 @@ config ADXL372_I2C module will be called adxl372_i2c. config BMA180 - tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" + tristate "Bosch BMA180/BMA25x 3-Axis Accelerometer Driver" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say Y here if you want to build a driver for the Bosch BMA180 or - BMA250 triaxial acceleration sensor. + BMA25x triaxial acceleration sensor. To compile this driver as a module, choose M here: the module will be called bma180. @@ -112,6 +112,22 @@ config BMA220 To compile this driver as a module, choose M here: the module will be called bma220_spi. +config BMA400 + tristate "Bosch BMA400 3-Axis Accelerometer Driver" + select REGMAP + select BMA400_I2C if I2C + help + Say Y here if you want to build a driver for the Bosch BMA400 + triaxial acceleration sensor. + + To compile this driver as a module, choose M here: the + module will be called bma400_core and you will also get + bma400_i2c if I2C is enabled. + +config BMA400_I2C + tristate + depends on BMA400 + config BMC150_ACCEL tristate "Bosch BMC150 Accelerometer Driver" select IIO_BUFFER diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 56bd0215e0d4..3a051cf37f40 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -14,6 +14,8 @@ obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o obj-$(CONFIG_BMA180) += bma180.o obj-$(CONFIG_BMA220) += bma220_spi.o +obj-$(CONFIG_BMA400) += bma400_core.o +obj-$(CONFIG_BMA400_I2C) += bma400_i2c.o obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index 1574e4604a4f..fcd91d5f05fd 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -9,6 +9,7 @@ * SPI is not supported by driver * BMA180: 7-bit I2C slave address 0x40 or 0x41 * BMA250: 7-bit I2C slave address 0x18 or 0x19 + * BMA254: 7-bit I2C slave address 0x18 or 0x19 */ #include <linux/module.h> @@ -18,6 +19,7 @@ #include <linux/of_device.h> #include <linux/of.h> #include <linux/bitops.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/iio/iio.h> @@ -33,17 +35,20 @@ enum chip_ids { BMA180, BMA250, + BMA254, }; struct bma180_data; struct bma180_part_info { + u8 chip_id; const struct iio_chan_spec *channels; unsigned int num_channels; const int *scale_table; unsigned int num_scales; const int *bw_table; unsigned int num_bw; + int center_temp; u8 int_reset_reg, int_reset_mask; u8 sleep_reg, sleep_mask; @@ -51,6 +56,7 @@ struct bma180_part_info { u8 scale_reg, scale_mask; u8 power_reg, power_mask, lowpower_val; u8 int_enable_reg, int_enable_mask; + u8 int_map_reg, int_enable_dataready_int1_mask; u8 softreset_reg; int (*chip_config)(struct bma180_data *data); @@ -89,6 +95,8 @@ struct bma180_part_info { #define BMA180_RESET_VAL 0xb6 #define BMA180_ID_REG_VAL 0x03 +#define BMA250_ID_REG_VAL 0x03 +#define BMA254_ID_REG_VAL 0xfa /* 250 decimal */ /* Chip power modes */ #define BMA180_LOW_POWER 0x03 @@ -109,7 +117,26 @@ struct bma180_part_info { #define BMA250_INT1_DATA_MASK BIT(0) #define BMA250_INT_RESET_MASK BIT(7) /* Reset pending interrupts */ +#define BMA254_RANGE_REG 0x0f +#define BMA254_BW_REG 0x10 +#define BMA254_POWER_REG 0x11 +#define BMA254_RESET_REG 0x14 +#define BMA254_INT_ENABLE_REG 0x17 +#define BMA254_INT_MAP_REG 0x1a +#define BMA254_INT_RESET_REG 0x21 + +#define BMA254_RANGE_MASK GENMASK(3, 0) /* Range of accel values */ +#define BMA254_BW_MASK GENMASK(4, 0) /* Accel bandwidth */ +#define BMA254_SUSPEND_MASK BIT(7) /* chip will sleep */ +#define BMA254_LOWPOWER_MASK BIT(6) +#define BMA254_DATA_INTEN_MASK BIT(4) +#define BMA254_INT2_DATA_MASK BIT(7) +#define BMA254_INT1_DATA_MASK BIT(0) +#define BMA254_INT_RESET_MASK BIT(7) /* Reset pending interrupts */ + struct bma180_data { + struct regulator *vdd_supply; + struct regulator *vddio_supply; struct i2c_client *client; struct iio_trigger *trig; const struct bma180_part_info *part_info; @@ -132,8 +159,8 @@ enum bma180_chan { static int bma180_bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */ static int bma180_scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 }; -static int bma250_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */ -static int bma250_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0, +static int bma25x_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */ +static int bma25x_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0, 0, 0, 306458 }; static int bma180_get_data_reg(struct bma180_data *data, enum bma180_chan chan) @@ -307,8 +334,11 @@ static int bma180_chip_init(struct bma180_data *data) if (ret < 0) return ret; - if (ret != BMA180_ID_REG_VAL) + if (ret != data->part_info->chip_id) { + dev_err(&data->client->dev, "wrong chip ID %d expected %d\n", + ret, data->part_info->chip_id); return -ENODEV; + } ret = bma180_soft_reset(data); if (ret) @@ -355,7 +385,7 @@ err: return ret; } -static int bma250_chip_config(struct bma180_data *data) +static int bma25x_chip_config(struct bma180_data *data) { int ret = bma180_chip_init(data); @@ -367,8 +397,12 @@ static int bma250_chip_config(struct bma180_data *data) ret = bma180_set_scale(data, 38344); /* 2 G */ if (ret) goto err; - ret = bma180_set_bits(data, BMA250_INT_MAP_REG, - BMA250_INT1_DATA_MASK, 1); + /* + * This enables dataready interrupt on the INT1 pin + * FIXME: support using the INT2 pin + */ + ret = bma180_set_bits(data, data->part_info->int_map_reg, + data->part_info->int_enable_dataready_int1_mask, 1); if (ret) goto err; @@ -394,7 +428,7 @@ err: dev_err(&data->client->dev, "failed to disable the chip\n"); } -static void bma250_chip_disable(struct bma180_data *data) +static void bma25x_chip_disable(struct bma180_data *data) { if (bma180_set_new_data_intr_state(data, false)) goto err; @@ -497,7 +531,7 @@ static int bma180_read_raw(struct iio_dev *indio_dev, return -EINVAL; } case IIO_CHAN_INFO_OFFSET: - *val = 48; /* 0 LSB @ 24 degree C */ + *val = data->part_info->center_temp; return IIO_VAL_INT; default: return -EINVAL; @@ -627,34 +661,96 @@ static const struct iio_chan_spec bma250_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(4), }; +static const struct iio_chan_spec bma254_channels[] = { + BMA180_ACC_CHANNEL(X, 12), + BMA180_ACC_CHANNEL(Y, 12), + BMA180_ACC_CHANNEL(Z, 12), + BMA180_TEMP_CHANNEL, + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + static const struct bma180_part_info bma180_part_info[] = { [BMA180] = { - bma180_channels, ARRAY_SIZE(bma180_channels), - bma180_scale_table, ARRAY_SIZE(bma180_scale_table), - bma180_bw_table, ARRAY_SIZE(bma180_bw_table), - BMA180_CTRL_REG0, BMA180_RESET_INT, - BMA180_CTRL_REG0, BMA180_SLEEP, - BMA180_BW_TCS, BMA180_BW, - BMA180_OFFSET_LSB1, BMA180_RANGE, - BMA180_TCO_Z, BMA180_MODE_CONFIG, BMA180_LOW_POWER, - BMA180_CTRL_REG3, BMA180_NEW_DATA_INT, - BMA180_RESET, - bma180_chip_config, - bma180_chip_disable, + .chip_id = BMA180_ID_REG_VAL, + .channels = bma180_channels, + .num_channels = ARRAY_SIZE(bma180_channels), + .scale_table = bma180_scale_table, + .num_scales = ARRAY_SIZE(bma180_scale_table), + .bw_table = bma180_bw_table, + .num_bw = ARRAY_SIZE(bma180_bw_table), + .center_temp = 48, /* 0 LSB @ 24 degree C */ + .int_reset_reg = BMA180_CTRL_REG0, + .int_reset_mask = BMA180_RESET_INT, + .sleep_reg = BMA180_CTRL_REG0, + .sleep_mask = BMA180_SLEEP, + .bw_reg = BMA180_BW_TCS, + .bw_mask = BMA180_BW, + .scale_reg = BMA180_OFFSET_LSB1, + .scale_mask = BMA180_RANGE, + .power_reg = BMA180_TCO_Z, + .power_mask = BMA180_MODE_CONFIG, + .lowpower_val = BMA180_LOW_POWER, + .int_enable_reg = BMA180_CTRL_REG3, + .int_enable_mask = BMA180_NEW_DATA_INT, + .softreset_reg = BMA180_RESET, + .chip_config = bma180_chip_config, + .chip_disable = bma180_chip_disable, }, [BMA250] = { - bma250_channels, ARRAY_SIZE(bma250_channels), - bma250_scale_table, ARRAY_SIZE(bma250_scale_table), - bma250_bw_table, ARRAY_SIZE(bma250_bw_table), - BMA250_INT_RESET_REG, BMA250_INT_RESET_MASK, - BMA250_POWER_REG, BMA250_SUSPEND_MASK, - BMA250_BW_REG, BMA250_BW_MASK, - BMA250_RANGE_REG, BMA250_RANGE_MASK, - BMA250_POWER_REG, BMA250_LOWPOWER_MASK, 1, - BMA250_INT_ENABLE_REG, BMA250_DATA_INTEN_MASK, - BMA250_RESET_REG, - bma250_chip_config, - bma250_chip_disable, + .chip_id = BMA250_ID_REG_VAL, + .channels = bma250_channels, + .num_channels = ARRAY_SIZE(bma250_channels), + .scale_table = bma25x_scale_table, + .num_scales = ARRAY_SIZE(bma25x_scale_table), + .bw_table = bma25x_bw_table, + .num_bw = ARRAY_SIZE(bma25x_bw_table), + .center_temp = 48, /* 0 LSB @ 24 degree C */ + .int_reset_reg = BMA250_INT_RESET_REG, + .int_reset_mask = BMA250_INT_RESET_MASK, + .sleep_reg = BMA250_POWER_REG, + .sleep_mask = BMA250_SUSPEND_MASK, + .bw_reg = BMA250_BW_REG, + .bw_mask = BMA250_BW_MASK, + .scale_reg = BMA250_RANGE_REG, + .scale_mask = BMA250_RANGE_MASK, + .power_reg = BMA250_POWER_REG, + .power_mask = BMA250_LOWPOWER_MASK, + .lowpower_val = 1, + .int_enable_reg = BMA250_INT_ENABLE_REG, + .int_enable_mask = BMA250_DATA_INTEN_MASK, + .int_map_reg = BMA250_INT_MAP_REG, + .int_enable_dataready_int1_mask = BMA250_INT1_DATA_MASK, + .softreset_reg = BMA250_RESET_REG, + .chip_config = bma25x_chip_config, + .chip_disable = bma25x_chip_disable, + }, + [BMA254] = { + .chip_id = BMA254_ID_REG_VAL, + .channels = bma254_channels, + .num_channels = ARRAY_SIZE(bma254_channels), + .scale_table = bma25x_scale_table, + .num_scales = ARRAY_SIZE(bma25x_scale_table), + .bw_table = bma25x_bw_table, + .num_bw = ARRAY_SIZE(bma25x_bw_table), + .center_temp = 46, /* 0 LSB @ 23 degree C */ + .int_reset_reg = BMA254_INT_RESET_REG, + .int_reset_mask = BMA254_INT_RESET_MASK, + .sleep_reg = BMA254_POWER_REG, + .sleep_mask = BMA254_SUSPEND_MASK, + .bw_reg = BMA254_BW_REG, + .bw_mask = BMA254_BW_MASK, + .scale_reg = BMA254_RANGE_REG, + .scale_mask = BMA254_RANGE_MASK, + .power_reg = BMA254_POWER_REG, + .power_mask = BMA254_LOWPOWER_MASK, + .lowpower_val = 1, + .int_enable_reg = BMA254_INT_ENABLE_REG, + .int_enable_mask = BMA254_DATA_INTEN_MASK, + .int_map_reg = BMA254_INT_MAP_REG, + .int_enable_dataready_int1_mask = BMA254_INT1_DATA_MASK, + .softreset_reg = BMA254_RESET_REG, + .chip_config = bma25x_chip_config, + .chip_disable = bma25x_chip_disable, }, }; @@ -712,12 +808,13 @@ static const struct iio_trigger_ops bma180_trigger_ops = { static int bma180_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct device *dev = &client->dev; struct bma180_data *data; struct iio_dev *indio_dev; enum chip_ids chip; int ret; - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; @@ -725,22 +822,56 @@ static int bma180_probe(struct i2c_client *client, i2c_set_clientdata(client, indio_dev); data->client = client; if (client->dev.of_node) - chip = (enum chip_ids)of_device_get_match_data(&client->dev); + chip = (enum chip_ids)of_device_get_match_data(dev); else chip = id->driver_data; data->part_info = &bma180_part_info[chip]; - ret = iio_read_mount_matrix(&client->dev, "mount-matrix", + ret = iio_read_mount_matrix(dev, "mount-matrix", &data->orientation); if (ret) return ret; + data->vdd_supply = devm_regulator_get(dev, "vdd"); + if (IS_ERR(data->vdd_supply)) { + if (PTR_ERR(data->vdd_supply) != -EPROBE_DEFER) + dev_err(dev, "Failed to get vdd regulator %d\n", + (int)PTR_ERR(data->vdd_supply)); + return PTR_ERR(data->vdd_supply); + } + data->vddio_supply = devm_regulator_get(dev, "vddio"); + if (IS_ERR(data->vddio_supply)) { + if (PTR_ERR(data->vddio_supply) != -EPROBE_DEFER) + dev_err(dev, "Failed to get vddio regulator %d\n", + (int)PTR_ERR(data->vddio_supply)); + return PTR_ERR(data->vddio_supply); + } + /* Typical voltage 2.4V these are min and max */ + ret = regulator_set_voltage(data->vdd_supply, 1620000, 3600000); + if (ret) + return ret; + ret = regulator_set_voltage(data->vddio_supply, 1200000, 3600000); + if (ret) + return ret; + ret = regulator_enable(data->vdd_supply); + if (ret) { + dev_err(dev, "Failed to enable vdd regulator: %d\n", ret); + return ret; + } + ret = regulator_enable(data->vddio_supply); + if (ret) { + dev_err(dev, "Failed to enable vddio regulator: %d\n", ret); + goto err_disable_vdd; + } + /* Wait to make sure we started up properly (3 ms at least) */ + usleep_range(3000, 5000); + ret = data->part_info->chip_config(data); if (ret < 0) goto err_chip_disable; mutex_init(&data->mutex); - indio_dev->dev.parent = &client->dev; + indio_dev->dev.parent = dev; indio_dev->channels = data->part_info->channels; indio_dev->num_channels = data->part_info->num_channels; indio_dev->name = id->name; @@ -755,15 +886,15 @@ static int bma180_probe(struct i2c_client *client, goto err_chip_disable; } - ret = devm_request_irq(&client->dev, client->irq, + ret = devm_request_irq(dev, client->irq, iio_trigger_generic_data_rdy_poll, IRQF_TRIGGER_RISING, "bma180_event", data->trig); if (ret) { - dev_err(&client->dev, "unable to request IRQ\n"); + dev_err(dev, "unable to request IRQ\n"); goto err_trigger_free; } - data->trig->dev.parent = &client->dev; + data->trig->dev.parent = dev; data->trig->ops = &bma180_trigger_ops; iio_trigger_set_drvdata(data->trig, indio_dev); indio_dev->trig = iio_trigger_get(data->trig); @@ -776,13 +907,13 @@ static int bma180_probe(struct i2c_client *client, ret = iio_triggered_buffer_setup(indio_dev, NULL, bma180_trigger_handler, NULL); if (ret < 0) { - dev_err(&client->dev, "unable to setup iio triggered buffer |