diff options
Diffstat (limited to 'drivers/media/platform/davinci')
23 files changed, 18454 insertions, 0 deletions
diff --git a/drivers/media/platform/davinci/Kconfig b/drivers/media/platform/davinci/Kconfig new file mode 100644 index 000000000000..52c5ca68cb3d --- /dev/null +++ b/drivers/media/platform/davinci/Kconfig @@ -0,0 +1,121 @@ +config VIDEO_DAVINCI_VPIF_DISPLAY + tristate "DM646x/DA850/OMAPL138 EVM Video Display" + depends on VIDEO_DEV && (MACH_DAVINCI_DM6467_EVM || MACH_DAVINCI_DA850_EVM) + select VIDEOBUF2_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + select VIDEO_ADV7343 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_THS7303 if VIDEO_HELPER_CHIPS_AUTO + help + Enables Davinci VPIF module used for display devices. + This module is common for following DM6467/DA850/OMAPL138 + based display devices. + + To compile this driver as a module, choose M here: the + module will be called vpif_display. + +config VIDEO_DAVINCI_VPIF_CAPTURE + tristate "DM646x/DA850/OMAPL138 EVM Video Capture" + depends on VIDEO_DEV && (MACH_DAVINCI_DM6467_EVM || MACH_DAVINCI_DA850_EVM) + select VIDEOBUF2_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + help + Enables Davinci VPIF module used for captur devices. + This module is common for following DM6467/DA850/OMAPL138 + based capture devices. + + To compile this driver as a module, choose M here: the + module will be called vpif_capture. + +config VIDEO_DAVINCI_VPIF + tristate "DaVinci VPIF Driver" + depends on VIDEO_DAVINCI_VPIF_DISPLAY || VIDEO_DAVINCI_VPIF_CAPTURE + help + Support for DaVinci VPIF Driver. + + To compile this driver as a module, choose M here: the + module will be called vpif. + +config VIDEO_VPSS_SYSTEM + tristate "VPSS System module driver" + depends on ARCH_DAVINCI + help + Support for vpss system module for video driver + +config VIDEO_VPFE_CAPTURE + tristate "VPFE Video Capture Driver" + depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3) + depends on I2C + select VIDEOBUF_DMA_CONTIG + help + Support for DMx/AMx VPFE based frame grabber. This is the + common V4L2 module for following DMx/AMx SoCs from Texas + Instruments:- DM6446, DM365, DM355 & AM3517/05. + + To compile this driver as a module, choose M here: the + module will be called vpfe-capture. + +config VIDEO_DM6446_CCDC + tristate "DM6446 CCDC HW module" + depends on VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM355_CCDC + tristate "DM355 CCDC HW module" + depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DM355 CCD hw module. DM355 CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from a slave decoders + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_ISIF + tristate "ISIF HW module" + depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables ISIF hw module. This is the hardware module for + configuring ISIF in VPFE to capture Raw Bayer RGB data from + a image sensor or YUV data from a YUV source. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM644X_VPBE + tristate "DM644X VPBE HW module" + depends on ARCH_DAVINCI_DM644x + select VIDEO_VPSS_SYSTEM + select VIDEOBUF_DMA_CONTIG + help + Enables VPBE modules used for display on a DM644x + SoC. + + To compile this driver as a module, choose M here: the + module will be called vpbe. + + +config VIDEO_VPBE_DISPLAY + tristate "VPBE V4L2 Display driver" + depends on ARCH_DAVINCI_DM644x + select VIDEO_DM644X_VPBE + help + Enables VPBE V4L2 Display driver on a DM644x device + + To compile this driver as a module, choose M here: the + module will be called vpbe_display. diff --git a/drivers/media/platform/davinci/Makefile b/drivers/media/platform/davinci/Makefile new file mode 100644 index 000000000000..74ed92d09257 --- /dev/null +++ b/drivers/media/platform/davinci/Makefile @@ -0,0 +1,20 @@ +# +# Makefile for the davinci video device drivers. +# + +# VPIF +obj-$(CONFIG_VIDEO_DAVINCI_VPIF) += vpif.o + +#VPIF Display driver +obj-$(CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY) += vpif_display.o +#VPIF Capture driver +obj-$(CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE) += vpif_capture.o + +# Capture: DM6446 and DM355 +obj-$(CONFIG_VIDEO_VPSS_SYSTEM) += vpss.o +obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o +obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o +obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o +obj-$(CONFIG_VIDEO_ISIF) += isif.o +obj-$(CONFIG_VIDEO_DM644X_VPBE) += vpbe.o vpbe_osd.o vpbe_venc.o +obj-$(CONFIG_VIDEO_VPBE_DISPLAY) += vpbe_display.o diff --git a/drivers/media/platform/davinci/ccdc_hw_device.h b/drivers/media/platform/davinci/ccdc_hw_device.h new file mode 100644 index 000000000000..86b9b3518965 --- /dev/null +++ b/drivers/media/platform/davinci/ccdc_hw_device.h @@ -0,0 +1,110 @@ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ccdc device API + */ +#ifndef _CCDC_HW_DEVICE_H +#define _CCDC_HW_DEVICE_H + +#ifdef __KERNEL__ +#include <linux/videodev2.h> +#include <linux/device.h> +#include <media/davinci/vpfe_types.h> +#include <media/davinci/ccdc_types.h> + +/* + * ccdc hw operations + */ +struct ccdc_hw_ops { + /* Pointer to initialize function to initialize ccdc device */ + int (*open) (struct device *dev); + /* Pointer to deinitialize function */ + int (*close) (struct device *dev); + /* set ccdc base address */ + void (*set_ccdc_base)(void *base, int size); + /* Pointer to function to enable or disable ccdc */ + void (*enable) (int en); + /* reset sbl. only for 6446 */ + void (*reset) (void); + /* enable output to sdram */ + void (*enable_out_to_sdram) (int en); + /* Pointer to function to set hw parameters */ + int (*set_hw_if_params) (struct vpfe_hw_if_param *param); + /* get interface parameters */ + int (*get_hw_if_params) (struct vpfe_hw_if_param *param); + /* + * Pointer to function to set parameters. Used + * for implementing VPFE_S_CCDC_PARAMS + */ + int (*set_params) (void *params); + /* + * Pointer to function to get parameter. Used + * for implementing VPFE_G_CCDC_PARAMS + */ + int (*get_params) (void *params); + /* Pointer to function to configure ccdc */ + int (*configure) (void); + + /* Pointer to function to set buffer type */ + int (*set_buftype) (enum ccdc_buftype buf_type); + /* Pointer to function to get buffer type */ + enum ccdc_buftype (*get_buftype) (void); + /* Pointer to function to set frame format */ + int (*set_frame_format) (enum ccdc_frmfmt frm_fmt); + /* Pointer to function to get frame format */ + enum ccdc_frmfmt (*get_frame_format) (void); + /* enumerate hw pix formats */ + int (*enum_pix)(u32 *hw_pix, int i); + /* Pointer to function to set buffer type */ + u32 (*get_pixel_format) (void); + /* Pointer to function to get pixel format. */ + int (*set_pixel_format) (u32 pixfmt); + /* Pointer to function to set image window */ + int (*set_image_window) (struct v4l2_rect *win); + /* Pointer to function to set image window */ + void (*get_image_window) (struct v4l2_rect *win); + /* Pointer to function to get line length */ + unsigned int (*get_line_length) (void); + + /* Query CCDC control IDs */ + int (*queryctrl)(struct v4l2_queryctrl *qctrl); + /* Set CCDC control */ + int (*set_control)(struct v4l2_control *ctrl); + /* Get CCDC control */ + int (*get_control)(struct v4l2_control *ctrl); + + /* Pointer to function to set frame buffer address */ + void (*setfbaddr) (unsigned long addr); + /* Pointer to function to get field id */ + int (*getfid) (void); +}; + +struct ccdc_hw_device { + /* ccdc device name */ + char name[32]; + /* module owner */ + struct module *owner; + /* hw ops */ + struct ccdc_hw_ops hw_ops; +}; + +/* Used by CCDC module to register & unregister with vpfe capture driver */ +int vpfe_register_ccdc_device(struct ccdc_hw_device *dev); +void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev); + +#endif +#endif diff --git a/drivers/media/platform/davinci/dm355_ccdc.c b/drivers/media/platform/davinci/dm355_ccdc.c new file mode 100644 index 000000000000..ce0e4131c067 --- /dev/null +++ b/drivers/media/platform/davinci/dm355_ccdc.c @@ -0,0 +1,1072 @@ +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * CCDC hardware module for DM355 + * ------------------------------ + * + * This module is for configuring DM355 CCD controller of VPFE to capture + * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules + * such as Defect Pixel Correction, Color Space Conversion etc to + * pre-process the Bayer RGB data, before writing it to SDRAM. This + * module also allows application to configure individual + * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL. + * To do so, application include dm355_ccdc.h and vpfe_capture.h header + * files. The setparams() API is called by vpfe_capture driver + * to configure module parameters + * + * TODO: 1) Raw bayer parameter settings and bayer capture + * 2) Split module parameter structure to module specific ioctl structs + * 3) add support for lense shading correction + * 4) investigate if enum used for user space type definition + * to be replaced by #defines or integer + */ +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/videodev2.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/module.h> + +#include <media/davinci/dm355_ccdc.h> +#include <media/davinci/vpss.h> + +#include "dm355_ccdc_regs.h" +#include "ccdc_hw_device.h" + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CCDC Driver for DM355"); +MODULE_AUTHOR("Texas Instruments"); + +static struct ccdc_oper_config { + struct device *dev; + /* CCDC interface type */ + enum vpfe_hw_if_type if_type; + /* Raw Bayer configuration */ + struct ccdc_params_raw bayer; + /* YCbCr configuration */ + struct ccdc_params_ycbcr ycbcr; + /* Master clock */ + struct clk *mclk; + /* slave clock */ + struct clk *sclk; + /* ccdc base address */ + void __iomem *base_addr; +} ccdc_cfg = { + /* Raw configurations */ + .bayer = { + .pix_fmt = CCDC_PIXFMT_RAW, + .frm_fmt = CCDC_FRMFMT_PROGRESSIVE, + .win = CCDC_WIN_VGA, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .gain = { + .r_ye = 256, + .gb_g = 256, + .gr_cy = 256, + .b_mg = 256 + }, + .config_params = { + .datasft = 2, + .mfilt1 = CCDC_NO_MEDIAN_FILTER1, + .mfilt2 = CCDC_NO_MEDIAN_FILTER2, + .alaw = { + .gama_wd = 2, + }, + .blk_clamp = { + .sample_pixel = 1, + .dc_sub = 25 + }, + .col_pat_field0 = { + .olop = CCDC_GREEN_BLUE, + .olep = CCDC_BLUE, + .elop = CCDC_RED, + .elep = CCDC_GREEN_RED + }, + .col_pat_field1 = { + .olop = CCDC_GREEN_BLUE, + .olep = CCDC_BLUE, + .elop = CCDC_RED, + .elep = CCDC_GREEN_RED + }, + }, + }, + /* YCbCr configuration */ + .ycbcr = { + .win = CCDC_WIN_PAL, + .pix_fmt = CCDC_PIXFMT_YCBCR_8BIT, + .frm_fmt = CCDC_FRMFMT_INTERLACED, + .fid_pol = VPFE_PINPOL_POSITIVE, + .vd_pol = VPFE_PINPOL_POSITIVE, + .hd_pol = VPFE_PINPOL_POSITIVE, + .bt656_enable = 1, + .pix_order = CCDC_PIXORDER_CBYCRY, + .buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED + }, +}; + + +/* Raw Bayer formats */ +static u32 ccdc_raw_bayer_pix_formats[] = + {V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16}; + +/* Raw YUV formats */ +static u32 ccdc_raw_yuv_pix_formats[] = + {V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV}; + +/* register access routines */ +static inline u32 regr(u32 offset) +{ + return __raw_readl(ccdc_cfg.base_addr + offset); +} + +static inline void regw(u32 val, u32 offset) +{ + __raw_writel(val, ccdc_cfg.base_addr + offset); +} + +static void ccdc_enable(int en) +{ + unsigned int temp; + temp = regr(SYNCEN); + temp &= (~CCDC_SYNCEN_VDHDEN_MASK); + temp |= (en & CCDC_SYNCEN_VDHDEN_MASK); + regw(temp, SYNCEN); +} + +static void ccdc_enable_output_to_sdram(int en) +{ + unsigned int temp; + temp = regr(SYNCEN); + temp &= (~(CCDC_SYNCEN_WEN_MASK)); + temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK); + regw(temp, SYNCEN); +} + +static void ccdc_config_gain_offset(void) +{ + /* configure gain */ + regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN); + regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN); + regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN); + regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN); + /* configure offset */ + regw(ccdc_cfg.bayer.ccdc_offset, OFFSET); +} + +/* + * ccdc_restore_defaults() + * This function restore power on defaults in the ccdc registers + */ +static int ccdc_restore_defaults(void) +{ + int i; + + dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults..."); + /* set all registers to zero */ + for (i = 0; i <= CCDC_REG_LAST; i += 4) + regw(0, i); + + /* now override the values with power on defaults in registers */ + regw(MODESET_DEFAULT, MODESET); + /* no culling support */ + regw(CULH_DEFAULT, CULH); + regw(CULV_DEFAULT, CULV); + /* Set default Gain and Offset */ + ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT; + ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT; + ccdc_config_gain_offset(); + regw(OUTCLIP_DEFAULT, OUTCLIP); + regw(LSCCFG2_DEFAULT, LSCCFG2); + /* select ccdc input */ + if (vpss_select_ccdc_source(VPSS_CCDCIN)) { + dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source"); + return -EFAULT; + } + /* select ccdc clock */ + if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) { + dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock"); + return -EFAULT; + } + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults..."); + return 0; +} + +static int ccdc_open(struct device *device) +{ + return ccdc_restore_defaults(); +} + +static int ccdc_close(struct device *device) +{ + /* disable clock */ + vpss_enable_clock(VPSS_CCDC_CLOCK, 0); + /* do nothing for now */ + return 0; +} +/* + * ccdc_setwin() + * This function will configure the window size to + * be capture in CCDC reg. + */ +static void ccdc_setwin(struct v4l2_rect *image_win, + enum ccdc_frmfmt frm_fmt, int ppc) +{ + int horz_start, horz_nr_pixels; + int vert_start, vert_nr_lines; + int mid_img = 0; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin..."); + + /* + * ppc - per pixel count. indicates how many pixels per cell + * output to SDRAM. example, for ycbcr, it is one y and one c, so 2. + * raw capture this is 1 + */ + horz_start = image_win->left << (ppc - 1); + horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1; + + /* Writing the horizontal info into the registers */ + regw(horz_start, SPH); + regw(horz_nr_pixels, NPH); + vert_start = image_win->top; + + if (frm_fmt == CCDC_FRMFMT_INTERLACED) { + vert_nr_lines = (image_win->height >> 1) - 1; + vert_start >>= 1; + /* Since first line doesn't have any data */ + vert_start += 1; + /* configure VDINT0 and VDINT1 */ + regw(vert_start, VDINT0); + } else { + /* Since first line doesn't have any data */ + vert_start += 1; + vert_nr_lines = image_win->height - 1; + /* configure VDINT0 and VDINT1 */ + mid_img = vert_start + (image_win->height / 2); + regw(vert_start, VDINT0); + regw(mid_img, VDINT1); + } + regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0); + regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1); + regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV); + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin..."); +} + +static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam) +{ + if (ccdcparam->datasft < CCDC_DATA_NO_SHIFT || + ccdcparam->datasft > CCDC_DATA_SHIFT_6BIT) { + dev_dbg(ccdc_cfg.dev, "Invalid value of data shift\n"); + return -EINVAL; + } + + if (ccdcparam->mfilt1 < CCDC_NO_MEDIAN_FILTER1 || + ccdcparam->mfilt1 > CCDC_MEDIAN_FILTER1) { + dev_dbg(ccdc_cfg.dev, "Invalid value of median filter1\n"); + return -EINVAL; + } + + if (ccdcparam->mfilt2 < CCDC_NO_MEDIAN_FILTER2 || + ccdcparam->mfilt2 > CCDC_MEDIAN_FILTER2) { + dev_dbg(ccdc_cfg.dev, "Invalid value of median filter2\n"); + return -EINVAL; + } + + if ((ccdcparam->med_filt_thres < 0) || + (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) { + dev_dbg(ccdc_cfg.dev, + "Invalid value of median filter threshold\n"); + return -EINVAL; + } + + if (ccdcparam->data_sz < CCDC_DATA_16BITS || + ccdcparam->data_sz > CCDC_DATA_8BITS) { + dev_dbg(ccdc_cfg.dev, "Invalid value of data size\n"); + return -EINVAL; + } + + if (ccdcparam->alaw.enable) { + if (ccdcparam->alaw.gama_wd < CCDC_GAMMA_BITS_13_4 || + ccdcparam->alaw.gama_wd > CCDC_GAMMA_BITS_09_0) { + dev_dbg(ccdc_cfg.dev, "Invalid value of ALAW\n"); + return -EINVAL; + } + } + + if (ccdcparam->blk_clamp.b_clamp_enable) { + if (ccdcparam->blk_clamp.sample_pixel < CCDC_SAMPLE_1PIXELS || + ccdcparam->blk_clamp.sample_pixel > CCDC_SAMPLE_16PIXELS) { + dev_dbg(ccdc_cfg.dev, + "Invalid value of sample pixel\n"); + return -EINVAL; + } + if (ccdcparam->blk_clamp.sample_ln < CCDC_SAMPLE_1LINES || + ccdcparam->blk_clamp.sample_ln > CCDC_SAMPLE_16LINES) { + dev_dbg(ccdc_cfg.dev, + "Invalid value of sample lines\n"); + return -EINVAL; + } + } + return 0; +} + +/* Parameter operations */ +static int ccdc_set_params(void __user *params) +{ + struct ccdc_config_params_raw ccdc_raw_params; + int x; + + /* only raw module parameters can be set through the IOCTL */ + if (ccdc_cfg.if_type != VPFE_RAW_BAYER) + return -EINVAL; + + x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params)); + if (x) { + dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdc" + "params, %d\n", x); + return -EFAULT; + } + + if (!validate_ccdc_param(&ccdc_raw_params)) { + memcpy(&ccdc_cfg.bayer.config_params, + &ccdc_raw_params, + sizeof(ccdc_raw_params)); + return 0; + } + return -EINVAL; +} + +/* This function will configure CCDC for YCbCr video capture */ +static void ccdc_config_ycbcr(void) +{ + struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr; + u32 temp; + + /* first set the CCDC power on defaults values in all registers */ + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr..."); + ccdc_restore_defaults(); + + /* configure pixel format & video frame format */ + temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) << + CCDC_INPUT_MODE_SHIFT) | + ((params->frm_fmt & CCDC_FRM_FMT_MASK) << + CCDC_FRM_FMT_SHIFT)); + + /* setup BT.656 sync mode */ + if (params->bt656_enable) { + regw(CCDC_REC656IF_BT656_EN, REC656IF); + /* + * configure the FID, VD, HD pin polarity fld,hd pol positive, + * vd negative, 8-bit pack mode + */ + temp |= CCDC_VD_POL_NEGATIVE; + } else { /* y/c external sync mode */ + temp |= (((params->fid_pol & CCDC_FID_POL_MASK) << + CCDC_FID_POL_SHIFT) | + ((params->hd_pol & CCDC_HD_POL_MASK) << + CCDC_HD_POL_SHIFT) | + ((params->vd_pol & CCDC_VD_POL_MASK) << + CCDC_VD_POL_SHIFT)); + } + + /* pack the data to 8-bit */ + temp |= CCDC_DATA_PACK_ENABLE; + + regw(temp, MODESET); + + /* configure video window */ + ccdc_setwin(¶ms->win, params->frm_fmt, 2); + + /* configure the order of y cb cr in SD-RAM */ + temp = (params->pix_order << CCDC_Y8POS_SHIFT); + temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC; + regw(temp, CCDCFG); + + /* + * configure the horizontal line offset. This is done by rounding up + * width to a multiple of 16 pixels and multiply by two to account for + * y:cb:cr 4:2:2 data + */ + regw(((params->win.width * 2 + 31) >> 5), HSIZE); + + /* configure the memory line offset */ + if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) { + /* two fields are interleaved in memory */ + regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST); + } + + dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n"); +} + +/* + * ccdc_config_black_clamp() + * configure parameters for Optical Black Clamp + */ +static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp) +{ + u32 val; + + if (!bclamp->b_clamp_enable) { + /* configure DCSub */ + regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB); + regw(0x0000, CLAMP); + return; + } + /* Enable the Black clamping, set sample lines and pixels */ + val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) | + ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) << + CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE; + regw(val, CLAMP); + + /* If Black clamping is enable then make dcsub 0 */ + val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK) + << CCDC_NUM_LINE_CALC_SHIFT; + regw(val, DCSUB); +} + +/* + * ccdc_config_black_compense() + * configure parameters for Black Compensation + */ +static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp) +{ + u32 val; + + val = (bcomp->b & CCDC_BLK_COMP_MASK) | + ((bcomp->gb & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GB_COMP_SHIFT); + regw(val, BLKCMP1); + + val = ((bcomp->gr & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_GR_COMP_SHIFT) | + ((bcomp->r & CCDC_BLK_COMP_MASK) << + CCDC_BLK_COMP_R_COMP_SHIFT); + regw(val, BLKCMP0); +} + +/* + * ccdc_write_dfc_entry() + * write an entry in the dfc table. + */ +int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc) +{ +/* TODO This is to be re-visited and adjusted */ +#define DFC_WRITE_WAIT_COUNT 1000 + u32 val, count = DFC_WRITE_WAIT_COUNT; + + regw(dfc->dft_corr_vert[index], DFCMEM0); + regw(dfc->dft_corr_horz[index], DFCMEM1); + regw(dfc->dft_corr_sub1[index], DFCMEM2); + regw(dfc->dft_corr_sub2[index], DFCMEM3); + regw(dfc->dft_corr_sub3[index], DFCMEM4); + /* set WR bit to write */ + val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK; + regw(val, DFCMEMCTL); + + /* + * Assume, it is very short. If we get an error, we need to + * adjust this value + */ + while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK) + count--; + /* + * TODO We expect the count to be non-zero to be successful. Adjust + * the count if write requires more time + */ + + if (count) { + dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n"); + return -1; + } + return 0; +} + +/* + * ccdc_config_vdfc() + * configure parameters for Vertical Defect Correction + */ +static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc) +{ + u32 val; + int i; + + /* Configure General Defect Correction. The table used is from IPIPE */ + val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK; + + /* Configure Vertical Defect Correction if needed */ + if (!dfc->ver_dft_en) { + /* Enable only General Defect Correction */ + regw(val, DFCCTL); + return 0; + } + + if (dfc->table_size > CCDC_DFT_TABLE_SIZE) + return -EINVAL; + + val |= CCDC_DFCCTL_VDFC_DISABLE; + val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) << + CCDC_DFCCTL_VDFCSL_SHIFT; + val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) << + CCDC_DFCCTL_VDFCUDA_SHIFT; + val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) << + CCDC_DFCCTL_VDFLSFT_SHIFT; + regw(val , DFCCTL); + + /* clear address ptr to offset 0 */ + val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT; + + /* write defect table entries */ + for (i = 0; i < dfc->table_size; i++) { + /* increment address for non zero index */ + if (i != 0) + val = CCDC_DFCMEMCTL_INC_ADDR; + regw(val, DFCMEMCTL); + if (ccdc_write_dfc_entry(i, dfc) < 0) + return -EFAULT; + } + + /* update saturation level and enable dfc */ + regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT); + val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK << + CCDC_DFCCTL_VDFCEN_SHIFT); + regw(val, DFCCTL); + return 0; +} + +/* + * ccdc_config_csc() + * configure parameters for color space conversion + * Each register CSCM0-7 has two values in S8Q5 format. + */ +static void ccdc_config_csc(struct ccdc_csc *csc) +{ + u32 val1, val2; + int i; + + if (!csc->enable) + return; + + /* Enable the CSC sub-module */ + regw(CCDC_CSC_ENABLE, CSCCTL); + + /* Converting the co-eff as per the format of the register */ + for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) { + if ((i % 2) == 0) { + /* CSCM - LSB */ + val1 = (csc->coeff[i].integer & + CCDC_CSC_COEF_INTEG_MASK) + << CCDC_CSC_COEF_INTEG_SHIFT; + /* + * convert decimal part to binary. Use 2 decimal + * precision, user values range from .00 - 0.99 + */ + val1 |= (((csc->coeff[i].decimal & + CCDC_CSC_COEF_DECIMAL_MASK) * + CCDC_CSC_DEC_MAX) / 100); + } else { + + /* CSCM - MSB */ + val2 = (csc->coeff[i].integer & + CCDC_CSC_COEF_INTEG_MASK) + << CCDC_CSC_COEF_INTEG_SHIFT; + val2 |= (((csc->coeff[i].decimal & + CCDC_CSC_COEF_DECIMAL_MASK) * + CCDC_CSC_DEC_MAX) / 100); + val2 <<= CCDC_CSCM_MSB_SHIFT; + val2 |= val1; + regw(val2, (CSCM0 + ((i - 1) << 1))); + } + } +} + +/* + * ccdc_config_color_patterns() + * configure parameters for color patterns + */ +static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0, + struct ccdc_col_pat *pat1) +{ + u32 val; + + val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) | + (pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) | + (pat1->elop << 12) | (pat1->elep << 14)); + regw(val, COLPTN); +} + +/* This function will configure CCDC for Raw mode image capture */ +static int ccdc_config_raw(void) +{ + struct ccdc_params_raw *params = &ccdc_cfg.bayer; + struct ccdc_config_params_raw *config_params = + &ccdc_cfg.bayer.config_params; + unsigned int val; + + dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw..."); + + /* restore power on defaults to register */ + ccdc_restore_defaults(); + + /* CCDCFG register: + * set CCD Not to swap input since input is RAW data + * set FID detection function to Latch at V-Sync + * set WENLOG - ccdc valid area to AND + * set TRGSEL to WENBIT + * set EXTRG to DISABLE + * disable latching function on VSYNC - shadowed registers + */ + regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC | + CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN | + CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG); + + /* + * Set VDHD direction to input, input type to raw input + * normal data polarity, do not use external WEN |