diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz8.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz8.c | 1975 |
1 files changed, 1975 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c new file mode 100644 index 000000000000..7af3c0853505 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz8.c @@ -0,0 +1,1975 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip KSZ8XXX series switch driver + * + * It supports the following switches: + * - KSZ8863, KSZ8873 aka KSZ88X3 + * - KSZ8895, KSZ8864 aka KSZ8895 family + * - KSZ8794, KSZ8795, KSZ8765 aka KSZ87XX + * Note that it does NOT support: + * - KSZ8563, KSZ8567 - see KSZ9477 driver + * + * Copyright (C) 2017 Microchip Technology Inc. + * Tristram Ha <Tristram.Ha@microchip.com> + */ + +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/gpio.h> +#include <linux/if_vlan.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_data/microchip-ksz.h> +#include <linux/phy.h> +#include <linux/etherdevice.h> +#include <linux/if_bridge.h> +#include <linux/micrel_phy.h> +#include <net/dsa.h> +#include <net/switchdev.h> +#include <linux/phylink.h> + +#include "ksz_common.h" +#include "ksz8_reg.h" +#include "ksz8.h" + +static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) +{ + regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); +} + +static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, + bool set) +{ + regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +/** + * ksz8_ind_write8 - EEE/ACL/PME indirect register write + * @dev: The device structure. + * @table: Function & table select, register 110. + * @addr: Indirect access control, register 111. + * @data: The data to be written. + * + * This function performs an indirect register write for EEE, ACL or + * PME switch functionalities. Both 8-bit registers 110 and 111 are + * written at once with ksz_write16, using the serial multiple write + * functionality. + * + * Return: 0 on success, or an error code on failure. + */ +static int ksz8_ind_write8(struct ksz_device *dev, u8 table, u16 addr, u8 data) +{ + const u16 *regs; + u16 ctrl_addr; + int ret = 0; + + regs = dev->info->regs; + + mutex_lock(&dev->alu_mutex); + + ctrl_addr = IND_ACC_TABLE(table) | addr; + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + if (!ret) + ret = ksz_write8(dev, regs[REG_IND_BYTE], data); + + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +/** + * ksz8_ind_read8 - EEE/ACL/PME indirect register read + * @dev: The device structure. + * @table: Function & table select, register 110. + * @addr: Indirect access control, register 111. + * @val: The value read. + * + * This function performs an indirect register read for EEE, ACL or + * PME switch functionalities. Both 8-bit registers 110 and 111 are + * written at once with ksz_write16, using the serial multiple write + * functionality. + * + * Return: 0 on success, or an error code on failure. + */ +static int ksz8_ind_read8(struct ksz_device *dev, u8 table, u16 addr, u8 *val) +{ + const u16 *regs; + u16 ctrl_addr; + int ret = 0; + + regs = dev->info->regs; + + mutex_lock(&dev->alu_mutex); + + ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr; + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + if (!ret) + ret = ksz_read8(dev, regs[REG_IND_BYTE], val); + + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +int ksz8_pme_write8(struct ksz_device *dev, u32 reg, u8 value) +{ + return ksz8_ind_write8(dev, (u8)(reg >> 8), (u8)(reg), value); +} + +int ksz8_pme_pread8(struct ksz_device *dev, int port, int offset, u8 *data) +{ + u8 table = (u8)(offset >> 8 | (port + 1)); + + return ksz8_ind_read8(dev, table, (u8)(offset), data); +} + +int ksz8_pme_pwrite8(struct ksz_device *dev, int port, int offset, u8 data) +{ + u8 table = (u8)(offset >> 8 | (port + 1)); + + return ksz8_ind_write8(dev, table, (u8)(offset), data); +} + +int ksz8_reset_switch(struct ksz_device *dev) +{ + if (ksz_is_ksz88x3(dev)) { + /* reset switch */ + ksz_cfg(dev, KSZ8863_REG_SW_RESET, + KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, true); + ksz_cfg(dev, KSZ8863_REG_SW_RESET, + KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, false); + } else { + /* reset switch */ + ksz_write8(dev, REG_POWER_MANAGEMENT_1, + SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S); + ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0); + } + + return 0; +} + +static int ksz8863_change_mtu(struct ksz_device *dev, int frame_size) +{ + u8 ctrl2 = 0; + + if (frame_size <= KSZ8_LEGAL_PACKET_SIZE) + ctrl2 |= KSZ8863_LEGAL_PACKET_ENABLE; + else if (frame_size > KSZ8863_NORMAL_PACKET_SIZE) + ctrl2 |= KSZ8863_HUGE_PACKET_ENABLE; + + return ksz_rmw8(dev, REG_SW_CTRL_2, KSZ8863_LEGAL_PACKET_ENABLE | + KSZ8863_HUGE_PACKET_ENABLE, ctrl2); +} + +static int ksz8795_change_mtu(struct ksz_device *dev, int frame_size) +{ + u8 ctrl1 = 0, ctrl2 = 0; + int ret; + + if (frame_size > KSZ8_LEGAL_PACKET_SIZE) + ctrl2 |= SW_LEGAL_PACKET_DISABLE; + if (frame_size > KSZ8863_NORMAL_PACKET_SIZE) + ctrl1 |= SW_HUGE_PACKET; + + ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_HUGE_PACKET, ctrl1); + if (ret) + return ret; + + return ksz_rmw8(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, ctrl2); +} + +int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu) +{ + u16 frame_size; + + if (!dsa_is_cpu_port(dev->ds, port)) + return 0; + + frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; + + switch (dev->chip_id) { + case KSZ8795_CHIP_ID: + case KSZ8794_CHIP_ID: + case KSZ8765_CHIP_ID: + return ksz8795_change_mtu(dev, frame_size); + case KSZ8830_CHIP_ID: + case KSZ8864_CHIP_ID: + case KSZ8895_CHIP_ID: + return ksz8863_change_mtu(dev, frame_size); + } + + return -EOPNOTSUPP; +} + +static int ksz8_port_queue_split(struct ksz_device *dev, int port, int queues) +{ + u8 mask_4q, mask_2q; + u8 reg_4q, reg_2q; + u8 data_4q = 0; + u8 data_2q = 0; + int ret; + + if (ksz_is_ksz88x3(dev)) { + mask_4q = KSZ8873_PORT_4QUEUE_SPLIT_EN; + mask_2q = KSZ8873_PORT_2QUEUE_SPLIT_EN; + reg_4q = REG_PORT_CTRL_0; + reg_2q = REG_PORT_CTRL_2; + + /* KSZ8795 family switches have Weighted Fair Queueing (WFQ) + * enabled by default. Enable it for KSZ8873 family switches + * too. Default value for KSZ8873 family is strict priority, + * which should be enabled by using TC_SETUP_QDISC_ETS, not + * by default. + */ + ret = ksz_rmw8(dev, REG_SW_CTRL_3, WEIGHTED_FAIR_QUEUE_ENABLE, + WEIGHTED_FAIR_QUEUE_ENABLE); + if (ret) + return ret; + } else { + mask_4q = KSZ8795_PORT_4QUEUE_SPLIT_EN; + mask_2q = KSZ8795_PORT_2QUEUE_SPLIT_EN; + reg_4q = REG_PORT_CTRL_13; + reg_2q = REG_PORT_CTRL_0; + + /* TODO: this is legacy from initial KSZ8795 driver, should be + * moved to appropriate place in the future. + */ + ret = ksz_rmw8(dev, REG_SW_CTRL_19, + SW_OUT_RATE_LIMIT_QUEUE_BASED, + SW_OUT_RATE_LIMIT_QUEUE_BASED); + if (ret) + return ret; + } + + if (queues == 4) + data_4q = mask_4q; + else if (queues == 2) + data_2q = mask_2q; + + ret = ksz_prmw8(dev, port, reg_4q, mask_4q, data_4q); + if (ret) + return ret; + + return ksz_prmw8(dev, port, reg_2q, mask_2q, data_2q); +} + +int ksz8_all_queues_split(struct ksz_device *dev, int queues) +{ + struct dsa_switch *ds = dev->ds; + const struct dsa_port *dp; + + dsa_switch_for_each_port(dp, ds) { + int ret = ksz8_port_queue_split(dev, dp->index, queues); + + if (ret) + return ret; + } + + return 0; +} + +void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt) +{ + const u32 *masks; + const u16 *regs; + u16 ctrl_addr; + u32 data; + u8 check; + int loop; + + masks = dev->info->masks; + regs = dev->info->regs; + + ctrl_addr = addr + dev->info->reg_mib_cnt * port; + ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + + /* It is almost guaranteed to always read the valid bit because of + * slow SPI speed. + */ + for (loop = 2; loop > 0; loop--) { + ksz_read8(dev, regs[REG_IND_MIB_CHECK], &check); + + if (check & masks[MIB_COUNTER_VALID]) { + ksz_read32(dev, regs[REG_IND_DATA_LO], &data); + if (check & masks[MIB_COUNTER_OVERFLOW]) + *cnt += MIB_COUNTER_VALUE + 1; + *cnt += data & MIB_COUNTER_VALUE; + break; + } + } + mutex_unlock(&dev->alu_mutex); +} + +static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, + u64 *dropped, u64 *cnt) +{ + const u32 *masks; + const u16 *regs; + u16 ctrl_addr; + u32 data; + u8 check; + int loop; + + masks = dev->info->masks; + regs = dev->info->regs; + + addr -= dev->info->reg_mib_cnt; + ctrl_addr = (KSZ8795_MIB_TOTAL_RX_1 - KSZ8795_MIB_TOTAL_RX_0) * port; + ctrl_addr += addr + KSZ8795_MIB_TOTAL_RX_0; + ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + + /* It is almost guaranteed to always read the valid bit because of + * slow SPI speed. + */ + for (loop = 2; loop > 0; loop--) { + ksz_read8(dev, regs[REG_IND_MIB_CHECK], &check); + + if (check & masks[MIB_COUNTER_VALID]) { + ksz_read32(dev, regs[REG_IND_DATA_LO], &data); + if (addr < 2) { + u64 total; + + total = check & MIB_TOTAL_BYTES_H; + total <<= 32; + *cnt += total; + *cnt += data; + if (check & masks[MIB_COUNTER_OVERFLOW]) { + total = MIB_TOTAL_BYTES_H + 1; + total <<= 32; + *cnt += total; + } + } else { + if (check & masks[MIB_COUNTER_OVERFLOW]) + *cnt += MIB_PACKET_DROPPED + 1; + *cnt += data & MIB_PACKET_DROPPED; + } + break; + } + } + mutex_unlock(&dev->alu_mutex); +} + +static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, + u64 *dropped, u64 *cnt) +{ + u32 *last = (u32 *)dropped; + const u16 *regs; + u16 ctrl_addr; + u32 data; + u32 cur; + + regs = dev->info->regs; + + addr -= dev->info->reg_mib_cnt; + ctrl_addr = addr ? KSZ8863_MIB_PACKET_DROPPED_TX_0 : + KSZ8863_MIB_PACKET_DROPPED_RX_0; + ctrl_addr += port; + ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + ksz_read32(dev, regs[REG_IND_DATA_LO], &data); + mutex_unlock(&dev->alu_mutex); + + data &= MIB_PACKET_DROPPED; + cur = last[addr]; + if (data != cur) { + last[addr] = data; + if (data < cur) + data += MIB_PACKET_DROPPED + 1; + data -= cur; + *cnt += data; + } +} + +void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, + u64 *dropped, u64 *cnt) +{ + if (is_ksz88xx(dev)) + ksz8863_r_mib_pkt(dev, port, addr, dropped, cnt); + else + ksz8795_r_mib_pkt(dev, port, addr, dropped, cnt); +} + +void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze) +{ + if (is_ksz88xx(dev)) + return; + + /* enable the port for flush/freeze function */ + if (freeze) + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); + ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze); + + /* disable the port after freeze is done */ + if (!freeze) + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false); +} + +void ksz8_port_init_cnt(struct ksz_device *dev, int port) +{ + struct ksz_port_mib *mib = &dev->ports[port].mib; + u64 *dropped; + + /* For KSZ8795 family. */ + if (ksz_is_ksz87xx(dev)) { + /* flush all enabled port MIB counters */ + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); + ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true); + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false); + } + + mib->cnt_ptr = 0; + + /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */ + while (mib->cnt_ptr < dev->info->reg_mib_cnt) { + dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr, + &mib->counters[mib->cnt_ptr]); + ++mib->cnt_ptr; + } + + /* last one in storage */ + dropped = &mib->counters[dev->info->mib_cnt]; + + /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */ + while (mib->cnt_ptr < dev->info->mib_cnt) { + dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr, + dropped, &mib->counters[mib->cnt_ptr]); + ++mib->cnt_ptr; + } +} + +static int ksz8_r_table(struct ksz_device *dev, int table, u16 addr, u64 *data) +{ + const u16 *regs; + u16 ctrl_addr; + int ret; + + regs = dev->info->regs; + + ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr; + + mutex_lock(&dev->alu_mutex); + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + if (ret) + goto unlock_alu; + + ret = ksz_read64(dev, regs[REG_IND_DATA_HI], data); +unlock_alu: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +static int ksz8_w_table(struct ksz_device *dev, int table, u16 addr, u64 data) +{ + const u16 *regs; + u16 ctrl_addr; + int ret; + + regs = dev->info->regs; + + ctrl_addr = IND_ACC_TABLE(table) | addr; + + mutex_lock(&dev->alu_mutex); + ret = ksz_write64(dev, regs[REG_IND_DATA_HI], data); + if (ret) + goto unlock_alu; + + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); +unlock_alu: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data) +{ + int timeout = 100; + const u32 *masks; + const u16 *regs; + int ret; + + masks = dev->info->masks; + regs = dev->info->regs; + + do { + ret = ksz_read8(dev, regs[REG_IND_DATA_CHECK], data); + if (ret) + return ret; + + timeout--; + } while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout); + + /* Entry is not ready for accessing. */ + if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) + return -ETIMEDOUT; + + /* Entry is ready for accessing. */ + return ksz_read8(dev, regs[REG_IND_DATA_8], data); +} + +static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr, + u8 *fid, u8 *src_port, u16 *entries) +{ + u32 data_hi, data_lo; + const u8 *shifts; + const u32 *masks; + const u16 *regs; + u16 ctrl_addr; + u64 buf = 0; + u8 data; + int cnt; + int ret; + + shifts = dev->info->shifts; + masks = dev->info->masks; + regs = dev->info->regs; + + ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr; + + mutex_lock(&dev->alu_mutex); + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + if (ret) + goto unlock_alu; + + ret = ksz8_valid_dyn_entry(dev, &data); + if (ret) + goto unlock_alu; + + if (data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY]) { + *entries = 0; + goto unlock_alu; + } + + ret = ksz_read64(dev, regs[REG_IND_DATA_HI], &buf); + if (ret) + goto unlock_alu; + + data_hi = (u32)(buf >> 32); + data_lo = (u32)buf; + + /* Check out how many valid entry in the table. */ + cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H]; + cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H]; + cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >> + shifts[DYNAMIC_MAC_ENTRIES]; + *entries = cnt + 1; + + *fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >> + shifts[DYNAMIC_MAC_FID]; + *src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >> + shifts[DYNAMIC_MAC_SRC_PORT]; + + mac_addr[5] = (u8)data_lo; + mac_addr[4] = (u8)(data_lo >> 8); + mac_addr[3] = (u8)(data_lo >> 16); + mac_addr[2] = (u8)(data_lo >> 24); + + mac_addr[1] = (u8)data_hi; + mac_addr[0] = (u8)(data_hi >> 8); + +unlock_alu: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr, + struct alu_struct *alu, bool *valid) +{ + u32 data_hi, data_lo; + const u8 *shifts; + const u32 *masks; + u64 data; + int ret; + + shifts = dev->info->shifts; + masks = dev->info->masks; + + ret = ksz8_r_table(dev, TABLE_STATIC_MAC, addr, &data); + if (ret) + return ret; + + data_hi = data >> 32; + data_lo = (u32)data; + + if (!(data_hi & (masks[STATIC_MAC_TABLE_VALID] | + masks[STATIC_MAC_TABLE_OVERRIDE]))) { + *valid = false; + return 0; + } + + alu->mac[5] = (u8)data_lo; + alu->mac[4] = (u8)(data_lo >> 8); + alu->mac[3] = (u8)(data_lo >> 16); + alu->mac[2] = (u8)(data_lo >> 24); + alu->mac[1] = (u8)data_hi; + alu->mac[0] = (u8)(data_hi >> 8); + alu->port_forward = + (data_hi & masks[STATIC_MAC_TABLE_FWD_PORTS]) >> + shifts[STATIC_MAC_FWD_PORTS]; + alu->is_override = (data_hi & masks[STATIC_MAC_TABLE_OVERRIDE]) ? 1 : 0; + + /* KSZ8795/KSZ8895 family switches have STATIC_MAC_TABLE_USE_FID and + * STATIC_MAC_TABLE_FID definitions off by 1 when doing read on the + * static MAC table compared to doing write. + */ + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) + data_hi >>= 1; + alu->is_static = true; + alu->is_use_fid = (data_hi & masks[STATIC_MAC_TABLE_USE_FID]) ? 1 : 0; + alu->fid = (data_hi & masks[STATIC_MAC_TABLE_FID]) >> + shifts[STATIC_MAC_FID]; + + *valid = true; + + return 0; +} + +static int ksz8_w_sta_mac_table(struct ksz_device *dev, u16 addr, + struct alu_struct *alu) +{ + u32 data_hi, data_lo; + const u8 *shifts; + const u32 *masks; + u64 data; + + shifts = dev->info->shifts; + masks = dev->info->masks; + + data_lo = ((u32)alu->mac[2] << 24) | + ((u32)alu->mac[3] << 16) | + ((u32)alu->mac[4] << 8) | alu->mac[5]; + data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1]; + data_hi |= (u32)alu->port_forward << shifts[STATIC_MAC_FWD_PORTS]; + + if (alu->is_override) + data_hi |= masks[STATIC_MAC_TABLE_OVERRIDE]; + if (alu->is_use_fid) { + data_hi |= masks[STATIC_MAC_TABLE_USE_FID]; + data_hi |= (u32)alu->fid << shifts[STATIC_MAC_FID]; + } + if (alu->is_static) + data_hi |= masks[STATIC_MAC_TABLE_VALID]; + else + data_hi &= ~masks[STATIC_MAC_TABLE_OVERRIDE]; + + data = (u64)data_hi << 32 | data_lo; + + return ksz8_w_table(dev, TABLE_STATIC_MAC, addr, data); +} + +static void ksz8_from_vlan(struct ksz_device *dev, u32 vlan, u8 *fid, + u8 *member, u8 *valid) +{ + const u8 *shifts; + const u32 *masks; + + shifts = dev->info->shifts; + masks = dev->info->masks; + + *fid = vlan & masks[VLAN_TABLE_FID]; + *member = (vlan & masks[VLAN_TABLE_MEMBERSHIP]) >> + shifts[VLAN_TABLE_MEMBERSHIP_S]; + *valid = !!(vlan & masks[VLAN_TABLE_VALID]); +} + +static void ksz8_to_vlan(struct ksz_device *dev, u8 fid, u8 member, u8 valid, + u16 *vlan) +{ + const u8 *shifts; + const u32 *masks; + + shifts = dev->info->shifts; + masks = dev->info->masks; + + *vlan = fid; + *vlan |= (u16)member << shifts[VLAN_TABLE_MEMBERSHIP_S]; + if (valid) + *vlan |= masks[VLAN_TABLE_VALID]; +} + +static void ksz8_r_vlan_entries(struct ksz_device *dev, u16 addr) +{ + const u8 *shifts; + u64 data; + int i; + + shifts = dev->info->shifts; + + ksz8_r_table(dev, TABLE_VLAN, addr, &data); + addr *= 4; + for (i = 0; i < 4; i++) { + dev->vlan_cache[addr + i].table[0] = (u16)data; + data >>= shifts[VLAN_TABLE]; + } +} + +static void ksz8_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan) +{ + int index; + u16 *data; + u16 addr; + u64 buf; + + data = (u16 *)&buf; + addr = vid / 4; + index = vid & 3; + ksz8_r_table(dev, TABLE_VLAN, addr, &buf); + *vlan = data[index]; +} + +static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan) +{ + int index; + u16 *data; + u16 addr; + u64 buf; + + data = (u16 *)&buf; + addr = vid / 4; + index = vid & 3; + ksz8_r_table(dev, TABLE_VLAN, addr, &buf); + data[index] = vlan; + dev->vlan_cache[vid].table[0] = vlan; + ksz8_w_table(dev, TABLE_VLAN, addr, buf); +} + +/** + * ksz879x_get_loopback - KSZ879x specific function to get loopback + * configuration status for a specific port + * @dev: Pointer to the device structure + * @port: Port number to query + * @val: Pointer to store the result + * + * This function reads the SMI registers to determine whether loopback mode + * is enabled for a specific port. + * + * Return: 0 on success, error code on failure. + */ +static int ksz879x_get_loopback(struct ksz_device *dev, u16 port, + u16 *val) +{ + u8 stat3; + int ret; + + ret = ksz_pread8(dev, port, REG_PORT_STATUS_3, &stat3); + if (ret) + return ret; + + if (stat3 & PORT_PHY_LOOPBACK) + *val |= BMCR_LOOPBACK; + + return 0; +} + +/** + * ksz879x_set_loopback - KSZ879x specific function to set loopback mode for + * a specific port + * @dev: Pointer to the device structure. + * @port: Port number to modify. + * @val: Value indicating whether to enable or disable loopback mode. + * + * This function translates loopback bit of the BMCR register into the + * corresponding hardware register bit value and writes it to the SMI interface. + * + * Return: 0 on success, error code on failure. + */ +static int ksz879x_set_loopback(struct ksz_device *dev, u16 port, u16 val) +{ + u8 stat3 = 0; + + if (val & BMCR_LOOPBACK) + stat3 |= PORT_PHY_LOOPBACK; + + return ksz_prmw8(dev, port, REG_PORT_STATUS_3, PORT_PHY_LOOPBACK, + stat3); +} + +/** + * ksz8_r_phy_ctrl - Translates and reads from the SMI interface to a MIIM PHY + * Control register (Reg. 31). + * @dev: The KSZ device instance. + * @port: The port number to be read. + * @val: The value read from the SMI interface. + * + * This function reads the SMI interface and translates the hardware register + * bit values into their corresponding control settings for a MIIM PHY Control + * register. + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_r_phy_ctrl(struct ksz_device *dev, int port, u16 *val) +{ + const u16 *regs = dev->info->regs; + u8 reg_val; + int ret; + + *val = 0; + + ret = ksz_pread8(dev, port, regs[P_LINK_STATUS], ®_val); + if (ret < 0) + return ret; + + if (reg_val & PORT_MDIX_STATUS) + *val |= KSZ886X_CTRL_MDIX_STAT; + + ret = ksz_pread8(dev, port, REG_PORT_LINK_MD_CTRL, ®_val); + if (ret < 0) + return ret; + + if (reg_val & PORT_FORCE_LINK) + *val |= KSZ886X_CTRL_FORCE_LINK; + + if (reg_val & PORT_POWER_SAVING) + *val |= KSZ886X_CTRL_PWRSAVE; + + if (reg_val & PORT_PHY_REMOTE_LOOPBACK) + *val |= KSZ886X_CTRL_REMOTE_LOOPBACK; + + return 0; +} + +/** + * ksz8_r_phy_bmcr - Translates and reads from the SMI interface to a MIIM PHY + * Basic mode control register (Reg. 0). + * @dev: The KSZ device instance. + * @port: The port number to be read. + * @val: The value read from the SMI interface. + * + * This function reads the SMI interface and translates the hardware register + * bit values into their corresponding control settings for a MIIM PHY Basic + * mode control register. + * + * MIIM Bit Mapping Comparison between KSZ8794 and KSZ8873 + * ------------------------------------------------------------------- + * MIIM Bit | KSZ8794 Reg/Bit | KSZ8873 Reg/Bit + * ----------------------------+-----------------------------+---------------- + * Bit 15 - Soft Reset | 0xF/4 | Not supported + * Bit 14 - Loopback | 0xD/0 (MAC), 0xF/7 (PHY) ~ 0xD/0 (PHY) + * Bit 13 - Force 100 | 0xC/6 = 0xC/6 + * Bit 12 - AN Enable | 0xC/7 (reverse logic) ~ 0xC/7 + * Bit 11 - Power Down | 0xD/3 = 0xD/3 + * Bit 10 - PHY Isolate | 0xF/5 | Not supported + * Bit 9 - Restart AN | 0xD/5 = 0xD/5 + * Bit 8 - Force Full-Duplex | 0xC/5 = 0xC/5 + * Bit 7 - Collision Test/Res. | Not supported | Not supported + * Bit 6 - Reserved | Not supported | Not supported + * Bit 5 - Hp_mdix | 0x9/7 ~ 0xF/7 + * Bit 4 - Force MDI | 0xD/1 = 0xD/1 + * Bit 3 - Disable MDIX | 0xD/2 = 0xD/2 + * Bit 2 - Disable Far-End F. | ???? | 0xD/4 + * Bit 1 - Disable Transmit | 0xD/6 = 0xD/6 + * Bit 0 - Disable LED | 0xD/7 = 0xD/7 + * ------------------------------------------------------------------- + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_r_phy_bmcr(struct ksz_device *dev, u16 port, u16 *val) +{ + const u16 *regs = dev->info->regs; + u8 restart, speed, ctrl; + int ret; + + *val = 0; + + ret = ksz_pread8(dev, port, regs[P_NEG_RESTART_CTRL], &restart); + if (ret) + return ret; + + ret = ksz_pread8(dev, port, regs[P_SPEED_STATUS], &speed); + if (ret) + return ret; + + ret = ksz_pread8(dev, port, regs[P_FORCE_CTRL], &ctrl); + if (ret) + return ret; + + if (ctrl & PORT_FORCE_100_MBIT) + *val |= BMCR_SPEED100; + + if (ksz_is_ksz88x3(dev)) { + if (restart & KSZ8873_PORT_PHY_LOOPBACK) + *val |= BMCR_LOOPBACK; + + if ((ctrl & PORT_AUTO_NEG_ENABLE)) + *val |= BMCR_ANENABLE; + } else { + ret = ksz879x_get_loopback(dev, port, val); + if (ret) + return ret; + + if (!(ctrl & PORT_AUTO_NEG_DISABLE)) + *val |= BMCR_ANENABLE; + } + + if (restart & PORT_POWER_DOWN) + *val |= BMCR_PDOWN; + + if (restart & PORT_AUTO_NEG_RESTART) + *val |= BMCR_ANRESTART; + + if (ctrl & PORT_FORCE_FULL_DUPLEX) + *val |= BMCR_FULLDPLX; + + if (speed & PORT_HP_MDIX) + *val |= KSZ886X_BMCR_HP_MDIX; + + if (restart & PORT_FORCE_MDIX) + *val |= KSZ886X_BMCR_FORCE_MDI; + + if (restart & PORT_AUTO_MDIX_DISABLE) + *val |= KSZ886X_BMCR_DISABLE_AUTO_MDIX; + + if (restart & PORT_TX_DISABLE) + *val |= KSZ886X_BMCR_DISABLE_TRANSMIT; + + if (restart & PORT_LED_OFF) + *val |= KSZ886X_BMCR_DISABLE_LED; + + return 0; +} + +int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) +{ + u8 ctrl, link, val1, val2; + int processed = true; + const u16 *regs; + u16 data = 0; + u16 p = phy; + int ret; + + regs = dev->info->regs; + + switch (reg) { + case MII_BMCR: + ret = ksz8_r_phy_bmcr(dev, p, &data); + if (ret) + return ret; + break; + case MII_BMSR: + ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link); + if (ret) + return ret; + + data = BMSR_100FULL | + BMSR_100HALF | + BMSR_10FULL | + BMSR_10HALF | + BMSR_ANEGCAPABLE; + if (link & PORT_AUTO_NEG_COMPLETE) + data |= BMSR_ANEGCOMPLETE; + if (link & PORT_STAT_LINK_GOOD) + data |= BMSR_LSTATUS; + break; + case MII_PHYSID1: + data = KSZ8795_ID_HI; + break; + case MII_PHYSID2: + if (ksz_is_ksz88x3(dev)) + data = KSZ8863_ID_LO; + else + data = KSZ8795_ID_LO; + break; + case MII_ADVERTISE: + ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl); + if (ret) + return ret; + + data = ADVERTISE_CSMA; + if (ctrl & PORT_AUTO_NEG_SYM_PAUSE) + data |= ADVERTISE_PAUSE_CAP; + if (ctrl & PORT_AUTO_NEG_100BTX_FD) + data |= ADVERTISE_100FULL; + if (ctrl & PORT_AUTO_NEG_100BTX) + data |= ADVERTISE_100HALF; + if (ctrl & PORT_AUTO_NEG_10BT_FD) + data |= ADVERTISE_10FULL; + if (ctrl & PORT_AUTO_NEG_10BT) + data |= ADVERTISE_10HALF; + break; + case MII_LPA: + ret = ksz_pread8(dev, p, regs[P_REMOTE_STATUS], &link); + if (ret) + return ret; + + data = LPA_SLCT; + if (link & PORT_REMOTE_SYM_PAUSE) + data |= LPA_PAUSE_CAP; + if (link & PORT_REMOTE_100BTX_FD) + data |= LPA_100FULL; + if (link & PORT_REMOTE_100BTX) + data |= LPA_100HALF; + if (link & PORT_REMOTE_10BT_FD) + data |= LPA_10FULL; + if (link & PORT_REMOTE_10BT) + data |= LPA_10HALF; + if (data & ~LPA_SLCT) + data |= LPA_LPACK; + break; + case PHY_REG_LINK_MD: + ret = ksz_pread8(dev, p, REG_PORT_LINK_MD_CTRL, &val1); + if (ret) + return ret; + + ret = ksz_pread8(dev, p, REG_PORT_LINK_MD_RESULT, &val2); + if (ret) + return ret; + + if (val1 & PORT_START_CABLE_DIAG) + data |= PHY_START_CABLE_DIAG; + + if (val1 & PORT_CABLE_10M_SHORT) + data |= PHY_CABLE_10M_SHORT; + + data |= FIELD_PREP(PHY_CABLE_DIAG_RESULT_M, + FIELD_GET(PORT_CABLE_DIAG_RESULT_M, val1)); + + data |= FIELD_PREP(PHY_CABLE_FAULT_COUNTER_M, + (FIELD_GET(PORT_CABLE_FAULT_COUNTER_H, val1) << 8) | + FIELD_GET(PORT_CABLE_FAULT_COUNTER_L, val2)); + break; + case PHY_REG_PHY_CTRL: + ret = ksz8_r_phy_ctrl(dev, p, &data); + if (ret) + return ret; + + break; + default: + processed = false; + break; + } + if (processed) + *val = data; + + return 0; +} + +/** + * ksz8_w_phy_ctrl - Translates and writes to the SMI interface from a MIIM PHY + * Control register (Reg. 31). + * @dev: The KSZ device instance. + * @port: The port number to be configured. + * @val: The register value to be written. + * + * This function translates control settings from a MIIM PHY Control register + * into their corresponding hardware register bit values for the SMI + * interface. + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_w_phy_ctrl(struct ksz_device *dev, int port, u16 val) +{ + u8 reg_val = 0; + int ret; + + if (val & KSZ886X_CTRL_FORCE_LINK) + reg_val |= PORT_FORCE_LINK; + + if (val & KSZ886X_CTRL_PWRSAVE) + reg_val |= PORT_POWER_SAVING; + + if (val & KSZ886X_CTRL_REMOTE_LOOPBACK) + reg_val |= PORT_PHY_REMOTE_LOOPBACK; + + ret = ksz_prmw8(dev, port, REG_PORT_LINK_MD_CTRL, PORT_FORCE_LINK | + PORT_POWER_SAVING | PORT_PHY_REMOTE_LOOPBACK, reg_val); + return ret; +} + +/** + * ksz8_w_phy_bmcr - Translates and writes to the SMI interface from a MIIM PHY + * Basic mode control register (Reg. 0). + * @dev: The KSZ device instance. + * @port: The port number to be configured. + * @val: The register value to be written. + * + * This function translates control settings from a MIIM PHY Basic mode control + * register into their corresponding hardware register bit values for the SMI + * interface. + * + * MIIM Bit Mapping Comparison between KSZ8794 and KSZ8873 + * ------------------------------------------------------------------- + * MIIM Bit | KSZ8794 Reg/Bit | KSZ8873 Reg/Bit + * ----------------------------+-----------------------------+---------------- + * Bit 15 - Soft Reset | 0xF/4 | Not supported + * Bit 14 - Loopback | 0xD/0 (MAC), 0xF/7 (PHY) ~ 0xD/0 (PHY) + * Bit 13 - Force 100 | 0xC/6 = 0xC/6 + * Bit 12 - AN Enable | 0xC/7 (reverse logic) ~ 0xC/7 + * Bit 11 - Power Down | 0xD/3 = 0xD/3 + * Bit 10 - PHY Isolate | 0xF/5 | Not supported + * Bit 9 - Restart AN | 0xD/5 = 0xD/5 + * Bit 8 - Force Full-Duplex | 0xC/5 = 0xC/5 + * Bit 7 - Collision Test/Res. | Not supported | Not supported + * Bit 6 - Reserved | Not supported | Not supported + * Bit 5 - Hp_mdix | 0x9/7 ~ 0xF/7 + * Bit 4 - Force MDI | 0xD/1 = 0xD/1 + * Bit 3 - Disable MDIX | 0xD/2 = 0xD/2 + * Bit 2 - Disable Far-End F. | ???? | 0xD/4 + * Bit 1 - Disable Transmit | 0xD/6 = 0xD/6 + * Bit 0 - Disable LED | 0xD/7 = 0xD/7 + * ------------------------------------------------------------------- + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_w_phy_bmcr(struct ksz_device *dev, u16 port, u16 val) +{ + u8 restart, speed, ctrl, restart_mask; + const u16 *regs = dev->info->regs; + int ret; + + /* Do not support PHY reset function. */ + if (val & BMCR_RESET) + return 0; + + speed = 0; + if (val & KSZ886X_BMCR_HP_MDIX) + speed |= PORT_HP_MDIX; + + ret = ksz_prmw8(dev, port, regs[P_SPEED_STATUS], PORT_HP_MDIX, speed); + if (ret) + return ret; + + ctrl = 0; + if (ksz_is_ksz88x3(dev)) { + if ((val & BMCR_ANENABLE)) + ctrl |= PORT_AUTO_NEG_ENABLE; + } else { + if (!(val & BMCR_ANENABLE)) + ctrl |= PORT_AUTO_NEG_DISABLE; + + /* Fiber port does not support auto-negotiation. */ + if (dev->ports[port].fiber) + ctrl |= PORT_AUTO_NEG_DISABLE; + } + + if (val & BMCR_SPEED100) + ctrl |= PORT_FORCE_100_MBIT; + + if (val & BMCR_FULLDPLX) + ctrl |= PORT_FORCE_FULL_DUPLEX; + + ret = ksz_prmw8(dev, port, regs[P_FORCE_CTRL], PORT_FORCE_100_MBIT | + /* PORT_AUTO_NEG_ENABLE and PORT_AUTO_NEG_DISABLE are the same + * bits + */ + PORT_FORCE_FULL_DUPLEX | PORT_AUTO_NEG_ENABLE, ctrl); + if (ret) + return ret; + + restart = 0; + restart_mask = PORT_LED_OFF | PORT_TX_DISABLE | PORT_AUTO_NEG_RESTART | + PORT_POWER_DOWN | PORT_AUTO_MDIX_DISABLE | PORT_FORCE_MDIX; + + if (val & KSZ886X_BMCR_DISABLE_LED) + restart |= PORT_LED_OFF; + + if (val |