diff options
Diffstat (limited to 'drivers/net/phy/mscc/mscc_main.c')
| -rw-r--r-- | drivers/net/phy/mscc/mscc_main.c | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c index 0e6e7076a740..3a7705228ed5 100644 --- a/drivers/net/phy/mscc/mscc_main.c +++ b/drivers/net/phy/mscc/mscc_main.c @@ -1516,6 +1516,21 @@ static void vsc8584_get_base_addr(struct phy_device *phydev) vsc8531->addr = addr; } +static void vsc85xx_coma_mode_release(struct phy_device *phydev) +{ + /* The coma mode (pin or reg) provides an optional feature that + * may be used to control when the PHYs become active. + * Alternatively the COMA_MODE pin may be connected low + * so that the PHYs are fully active once out of reset. + */ + + /* Enable output (mode=0) and write zero to it */ + vsc85xx_phy_write_page(phydev, MSCC_PHY_PAGE_EXTENDED_GPIO); + __phy_modify(phydev, MSCC_PHY_GPIO_CONTROL_2, + MSCC_PHY_COMA_MODE | MSCC_PHY_COMA_OUTPUT, 0); + vsc85xx_phy_write_page(phydev, MSCC_PHY_PAGE_STANDARD); +} + static int vsc8584_config_init(struct phy_device *phydev) { struct vsc8531_private *vsc8531 = phydev->priv; @@ -1962,6 +1977,7 @@ static int vsc8514_config_init(struct phy_device *phydev) ret = vsc8514_config_host_serdes(phydev); if (ret) goto err; + vsc85xx_coma_mode_release(phydev); } phy_unlock_mdio_bus(phydev); |