diff options
Diffstat (limited to 'drivers/usb/dwc3')
| -rw-r--r-- | drivers/usb/dwc3/core.c | 18 | ||||
| -rw-r--r-- | drivers/usb/dwc3/core.h | 12 |
2 files changed, 30 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 0b7bfd2cd550..edbca03df60c 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -485,6 +485,23 @@ static int dwc3_phy_setup(struct dwc3 *dwc) break; } + switch (dwc->hsphy_mode) { + case USBPHY_INTERFACE_MODE_UTMI: + reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | + DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); + reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) | + DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT); + break; + case USBPHY_INTERFACE_MODE_UTMIW: + reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | + DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); + reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) | + DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT); + break; + default: + break; + } + /* * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to * '0' during coreConsultant configuration. So default value will @@ -891,6 +908,7 @@ static int dwc3_probe(struct platform_device *pdev) dwc->maximum_speed = usb_get_maximum_speed(dev); dwc->dr_mode = usb_get_dr_mode(dev); + dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node); dwc->has_lpm_erratum = device_property_read_bool(dev, "snps,has-lpm-erratum"); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 08ed9e04db61..cc4f55123ca8 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -203,6 +203,14 @@ #define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) #define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4) #define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8) +#define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3) +#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1) +#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10) +#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf) +#define USBTRDTIM_UTMI_8_BIT 9 +#define USBTRDTIM_UTMI_16_BIT 5 +#define UTMI_PHYIF_16_BIT 1 +#define UTMI_PHYIF_8_BIT 0 /* Global USB2 PHY Vendor Control Register */ #define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25) @@ -748,6 +756,9 @@ struct dwc3_scratchpad_array { * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents * @dr_mode: requested mode of operation + * @hsphy_mode: UTMI phy mode, one of following: + * - USBPHY_INTERFACE_MODE_UTMI + * - USBPHY_INTERFACE_MODE_UTMIW * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY @@ -853,6 +864,7 @@ struct dwc3 { size_t regs_size; enum usb_dr_mode dr_mode; + enum usb_phy_interface hsphy_mode; u32 fladj; u32 irq_gadget; |