summaryrefslogtreecommitdiff
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/Kconfig12
-rw-r--r--drivers/usb/host/Makefile1
-rw-r--r--drivers/usb/host/ehci-exynos.c4
-rw-r--r--drivers/usb/host/ehci-sched.c2
-rw-r--r--drivers/usb/host/ehci-timer.c2
-rw-r--r--drivers/usb/host/fotg210-hcd.c2
-rw-r--r--drivers/usb/host/ohci-omap3.c211
-rw-r--r--drivers/usb/host/ohci-platform.c13
-rw-r--r--drivers/usb/host/ohci-pxa27x.c10
-rw-r--r--drivers/usb/host/uhci-hcd.c17
-rw-r--r--drivers/usb/host/uhci-hcd.h51
-rw-r--r--drivers/usb/host/uhci-platform.c22
-rw-r--r--drivers/usb/host/xhci-mem.c81
-rw-r--r--drivers/usb/host/xhci-ring.c200
-rw-r--r--drivers/usb/host/xhci.c25
-rw-r--r--drivers/usb/host/xhci.h22
16 files changed, 271 insertions, 404 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index ababb91d654a..fa5692dec832 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -473,8 +473,12 @@ config USB_OHCI_HCD_AT91
config USB_OHCI_HCD_OMAP3
tristate "OHCI support for OMAP3 and later chips"
depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5)
+ select USB_OHCI_HCD_PLATFORM
default y
- ---help---
+ help
+ This option is deprecated now and the driver was removed, use
+ USB_OHCI_HCD_PLATFORM instead.
+
Enables support for the on-chip OHCI controller on
OMAP3 and later chips.
@@ -627,7 +631,11 @@ config USB_UHCI_SUPPORT_NON_PCI_HC
config USB_UHCI_PLATFORM
bool
- default y if ARCH_VT8500
+ default y if (ARCH_VT8500 || ARCH_ASPEED)
+
+config USB_UHCI_ASPEED
+ bool
+ default y if ARCH_ASPEED
config USB_UHCI_BIG_ENDIAN_MMIO
bool
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index c77b0a38557b..cf2691fffcc0 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_USB_OHCI_HCD_PCI) += ohci-pci.o
obj-$(CONFIG_USB_OHCI_HCD_PLATFORM) += ohci-platform.o
obj-$(CONFIG_USB_OHCI_EXYNOS) += ohci-exynos.o
obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o
-obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o
obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o
obj-$(CONFIG_USB_OHCI_HCD_STI) += ohci-st.o
obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 7a603f66a9bc..26b641100639 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -279,7 +279,9 @@ static int exynos_ehci_resume(struct device *dev)
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
int ret;
- clk_prepare_enable(exynos_ehci->clk);
+ ret = clk_prepare_enable(exynos_ehci->clk);
+ if (ret)
+ return ret;
ret = exynos_ehci_phy_enable(dev);
if (ret) {
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 980a6b3b2da2..6bc6304672bc 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1105,7 +1105,7 @@ iso_stream_init(
addr |= epnum << 8;
addr |= dev->devnum;
stream->ps.usecs = HS_USECS_ISO(maxp);
- think_time = dev->tt ? dev->tt->think_time : 0;
+ think_time = dev->tt->think_time;
stream->ps.tt_usecs = NS_TO_US(think_time + usb_calc_bus_time(
dev->speed, is_input, 1, maxp));
hs_transfers = max(1u, (maxp + 187) / 188);
diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c
index 3893b5bafd87..0b6cdb723192 100644
--- a/drivers/usb/host/ehci-timer.c
+++ b/drivers/usb/host/ehci-timer.c
@@ -424,7 +424,7 @@ static enum hrtimer_restart ehci_hrtimer_func(struct hrtimer *t)
*/
now = ktime_get();
for_each_set_bit(e, &events, EHCI_HRTIMER_NUM_EVENTS) {
- if (now >= ehci->hr_timeouts[e])
+ if (ktime_compare(now, ehci->hr_timeouts[e]) >= 0)
event_handlers[e](ehci);
else
ehci_enable_event(ehci, e, false);
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index ced08dc229ad..457cc6525abd 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1380,7 +1380,7 @@ static enum hrtimer_restart fotg210_hrtimer_func(struct hrtimer *t)
*/
now = ktime_get();
for_each_set_bit(e, &events, FOTG210_HRTIMER_NUM_EVENTS) {
- if (now >= fotg210->hr_timeouts[e])
+ if (ktime_compare(now, fotg210->hr_timeouts[e]) >= 0)
event_handlers[e](fotg210);
else
fotg210_enable_event(fotg210, e, false);
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
deleted file mode 100644
index ec15aebe8786..000000000000
--- a/drivers/usb/host/ohci-omap3.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * ohci-omap3.c - driver for OHCI on OMAP3 and later processors
- *
- * Bus Glue for OMAP3 USBHOST 3 port OHCI controller
- * This controller is also used in later OMAPs and AM35x chips
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Author: Vikram Pandita <vikram.pandita@ti.com>
- * Author: Anand Gadiyar <gadiyar@ti.com>
- * Author: Keshava Munegowda <keshava_mgowda@ti.com>
- *
- * Based on ehci-omap.c and some other ohci glue layers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * TODO (last updated Feb 27, 2011):
- * - add kernel-doc
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/usb/otg.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-
-#include "ohci.h"
-
-#define DRIVER_DESC "OHCI OMAP3 driver"
-
-static const char hcd_name[] = "ohci-omap3";
-static struct hc_driver __read_mostly ohci_omap3_hc_driver;
-
-/*
- * configure so an HC device and id are always provided
- * always called with process context; sleeping is OK
- */
-
-/**
- * ohci_hcd_omap3_probe - initialize OMAP-based HCDs
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- */
-static int ohci_hcd_omap3_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct ohci_hcd *ohci;
- struct usb_hcd *hcd = NULL;
- void __iomem *regs = NULL;
- struct resource *res;
- int ret;
- int irq;
-
- if (usb_disabled())
- return -ENODEV;
-
- if (!dev->parent) {
- dev_err(dev, "Missing parent device\n");
- return -ENODEV;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(dev, "OHCI irq failed\n");
- return -ENODEV;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "UHH OHCI get resource failed\n");
- return -ENOMEM;
- }
-
- regs = ioremap(res->start, resource_size(res));
- if (!regs) {
- dev_err(dev, "UHH OHCI ioremap failed\n");
- return -ENOMEM;
- }
-
- /*
- * Right now device-tree probed devices don't get dma_mask set.
- * Since shared usb code relies on it, set it here for now.
- * Once we have dma capability bindings this can go away.
- */
- ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
- if (ret)
- goto err_io;
-
- ret = -ENODEV;
- hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
- dev_name(dev));
- if (!hcd) {
- dev_err(dev, "usb_create_hcd failed\n");
- goto err_io;
- }
-
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
- hcd->regs = regs;
-
- pm_runtime_enable(dev);
- pm_runtime_get_sync(dev);
-
- ohci = hcd_to_ohci(hcd);
- /*
- * RemoteWakeupConnected has to be set explicitly before
- * calling ohci_run. The reset value of RWC is 0.
- */
- ohci->hc_control = OHCI_CTRL_RWC;
-
- ret = usb_add_hcd(hcd, irq, 0);
- if (ret) {
- dev_dbg(dev, "failed to add hcd with err %d\n", ret);
- goto err_add_hcd;
- }
- device_wakeup_enable(hcd->self.controller);
-
- return 0;
-
-err_add_hcd:
- pm_runtime_put_sync(dev);
- usb_put_hcd(hcd);
-
-err_io:
- iounmap(regs);
-
- return ret;
-}
-
-/*
- * may be called without controller electrically present
- * may be called with controller, bus, and devices active
- */
-
-/**
- * ohci_hcd_omap3_remove - shutdown processing for OHCI HCDs
- * @pdev: USB Host Controller being removed
- *
- * Reverses the effect of ohci_hcd_omap3_probe(), first invoking
- * the HCD's stop() method. It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- */
-static int ohci_hcd_omap3_remove(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-
- iounmap(hcd->regs);
- usb_remove_hcd(hcd);
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
- usb_put_hcd(hcd);
- return 0;
-}
-
-static const struct of_device_id omap_ohci_dt_ids[] = {
- { .compatible = "ti,ohci-omap3" },
- { }
-};
-
-MODULE_DEVICE_TABLE(of, omap_ohci_dt_ids);
-
-static struct platform_driver ohci_hcd_omap3_driver = {
- .probe = ohci_hcd_omap3_probe,
- .remove = ohci_hcd_omap3_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "ohci-omap3",
- .of_match_table = omap_ohci_dt_ids,
- },
-};
-
-static int __init ohci_omap3_init(void)
-{
- if (usb_disabled())
- return -ENODEV;
-
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
- ohci_init_driver(&ohci_omap3_hc_driver, NULL);
- return platform_driver_register(&ohci_hcd_omap3_driver);
-}
-module_init(ohci_omap3_init);
-
-static void __exit ohci_omap3_cleanup(void)
-{
- platform_driver_unregister(&ohci_hcd_omap3_driver);
-}
-module_exit(ohci_omap3_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_ALIAS("platform:ohci-omap3");
-MODULE_AUTHOR("Anand Gadiyar <gadiyar@ti.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 6368fce43197..61fe2b985070 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/usb.h>
@@ -163,6 +164,10 @@ static int ohci_platform_probe(struct platform_device *dev)
if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no"))
ohci->flags |= OHCI_QUIRK_FRAME_NO;
+ if (of_property_read_bool(dev->dev.of_node,
+ "remote-wakeup-connected"))
+ ohci->hc_control = OHCI_CTRL_RWC;
+
of_property_read_u32(dev->dev.of_node, "num-ports",
&ohci->num_ports);
@@ -242,6 +247,8 @@ static int ohci_platform_probe(struct platform_device *dev)
}
#endif
+ pm_runtime_set_active(&dev->dev);
+ pm_runtime_enable(&dev->dev);
if (pdata->power_on) {
err = pdata->power_on(dev);
if (err < 0)
@@ -271,6 +278,7 @@ err_power:
if (pdata->power_off)
pdata->power_off(dev);
err_reset:
+ pm_runtime_disable(&dev->dev);
while (--rst >= 0)
reset_control_assert(priv->resets[rst]);
err_put_clks:
@@ -292,6 +300,7 @@ static int ohci_platform_remove(struct platform_device *dev)
struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
int clk, rst;
+ pm_runtime_get_sync(&dev->dev);
usb_remove_hcd(hcd);
if (pdata->power_off)
@@ -305,6 +314,9 @@ static int ohci_platform_remove(struct platform_device *dev)
usb_put_hcd(hcd);
+ pm_runtime_put_sync(&dev->dev);
+ pm_runtime_disable(&dev->dev);
+
if (pdata == &ohci_platform_defaults)
dev->dev.platform_data = NULL;
@@ -350,6 +362,7 @@ static int ohci_platform_resume(struct device *dev)
static const struct of_device_id ohci_platform_ids[] = {
{ .compatible = "generic-ohci", },
{ .compatible = "cavium,octeon-6335-ohci", },
+ { .compatible = "ti,ohci-omap3", },
{ }
};
MODULE_DEVICE_TABLE(of, ohci_platform_ids);
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 79efde8f21e0..21c010ffb03c 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -274,14 +274,16 @@ extern void pxa27x_clear_otgph(void);
static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
{
- int retval = 0;
+ int retval;
struct pxaohci_platform_data *inf;
uint32_t uhchr;
struct usb_hcd *hcd = dev_get_drvdata(dev);
inf = dev_get_platdata(dev);
- clk_prepare_enable(pxa_ohci->clk);
+ retval = clk_prepare_enable(pxa_ohci->clk);
+ if (retval)
+ return retval;
pxa27x_reset_hc(pxa_ohci);
@@ -296,8 +298,10 @@ static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev)
if (inf->init)
retval = inf->init(dev);
- if (retval < 0)
+ if (retval < 0) {
+ clk_disable_unprepare(pxa_ohci->clk);
return retval;
+ }
if (cpu_is_pxa3xx())
pxa3xx_u2d_start_hc(&hcd->self);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 94b150196d4f..c3267a78c94e 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -265,9 +265,13 @@ static void configure_hc(struct uhci_hcd *uhci)
static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
{
- /* If we have to ignore overcurrent events then almost by definition
- * we can't depend on resume-detect interrupts. */
- if (ignore_oc)
+ /*
+ * If we have to ignore overcurrent events then almost by definition
+ * we can't depend on resume-detect interrupts.
+ *
+ * Those interrupts also don't seem to work on ASpeed SoCs.
+ */
+ if (ignore_oc || uhci_is_aspeed(uhci))
return 1;
return uhci->resume_detect_interrupts_are_broken ?
@@ -384,6 +388,13 @@ static void start_rh(struct uhci_hcd *uhci)
{
uhci->is_stopped = 0;
+ /*
+ * Clear stale status bits on Aspeed as we get a stale HCH
+ * which causes problems later on
+ */
+ if (uhci_is_aspeed(uhci))
+ uhci_writew(uhci, uhci_readw(uhci, USBSTS), USBSTS);
+
/* Mark it configured and running with a 64-byte max packet.
* All interrupts are enabled, even though RESUME won't do anything.
*/
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 7fa318a3091d..91b22b2ea3aa 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -48,6 +48,8 @@
/* USB port status and control registers */
#define USBPORTSC1 16
#define USBPORTSC2 18
+#define USBPORTSC3 20
+#define USBPORTSC4 22
#define USBPORTSC_CCS 0x0001 /* Current Connect Status
* ("device present") */
#define USBPORTSC_CSC 0x0002 /* Connect Status Change */
@@ -427,6 +429,7 @@ struct uhci_hcd {
unsigned int wait_for_hp:1; /* Wait for HP port reset */
unsigned int big_endian_mmio:1; /* Big endian registers */
unsigned int big_endian_desc:1; /* Big endian descriptors */
+ unsigned int is_aspeed:1; /* Aspeed impl. workarounds */
/* Support for port suspend/resume/reset */
unsigned long port_c_suspend; /* Bit-arrays of ports */
@@ -490,6 +493,12 @@ struct urb_priv {
#define PCI_VENDOR_ID_GENESYS 0x17a0
#define PCI_DEVICE_ID_GL880S_UHCI 0x8083
+/* Aspeed SoC needs some quirks */
+static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
+{
+ return IS_ENABLED(CONFIG_USB_UHCI_ASPEED) && uhci->is_aspeed;
+}
+
/*
* Functions used to access controller registers. The UCHI spec says that host
* controller I/O registers are mapped into PCI I/O space. For non-PCI hosts
@@ -545,10 +554,42 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
#define uhci_big_endian_mmio(u) 0
#endif
+static inline int uhci_aspeed_reg(unsigned int reg)
+{
+ switch (reg) {
+ case USBCMD:
+ return 00;
+ case USBSTS:
+ return 0x04;
+ case USBINTR:
+ return 0x08;
+ case USBFRNUM:
+ return 0x80;
+ case USBFLBASEADD:
+ return 0x0c;
+ case USBSOF:
+ return 0x84;
+ case USBPORTSC1:
+ return 0x88;
+ case USBPORTSC2:
+ return 0x8c;
+ case USBPORTSC3:
+ return 0x90;
+ case USBPORTSC4:
+ return 0x94;
+ default:
+ pr_warn("UHCI: Unsupported register 0x%02x on Aspeed\n", reg);
+ /* Return an unimplemented register */
+ return 0x10;
+ }
+}
+
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
return inl(uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
return readl_be(uhci->regs + reg);
@@ -561,6 +602,8 @@ static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
if (uhci_has_pci_registers(uhci))
outl(val, uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
writel_be(val, uhci->regs + reg);
@@ -573,6 +616,8 @@ static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
return inw(uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
return readw_be(uhci->regs + reg);
@@ -585,6 +630,8 @@ static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
{
if (uhci_has_pci_registers(uhci))
outw(val, uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
writew_be(val, uhci->regs + reg);
@@ -597,6 +644,8 @@ static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
return inb(uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
return readb_be(uhci->regs + reg);
@@ -609,6 +658,8 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
{
if (uhci_has_pci_registers(uhci))
outb(val, uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
writeb_be(val, uhci->regs + reg);
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 32a6f3d8deec..1b4e086c33a0 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -15,7 +15,9 @@ static int uhci_platform_init(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- uhci->rh_numports = uhci_count_ports(hcd);
+ /* Probe number of ports if not already provided by DT */
+ if (!uhci->rh_numports)
+ uhci->rh_numports = uhci_count_ports(hcd);
/* Set up pointers to to generic functions */
uhci->reset_hc = uhci_generic_reset_hc;
@@ -63,6 +65,7 @@ static const struct hc_driver uhci_platform_hc_driver = {
static int uhci_hcd_platform_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct usb_hcd *hcd;
struct uhci_hcd *uhci;
struct resource *res;
@@ -98,6 +101,23 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
uhci->regs = hcd->regs;
+ /* Grab some things from the device-tree */
+ if (np) {
+ u32 num_ports;
+
+ if (of_property_read_u32(np, "#ports", &num_ports) == 0) {
+ uhci->rh_numports = num_ports;
+ dev_info(&pdev->dev,
+ "Detected %d ports from device-tree\n",
+ num_ports);
+ }
+ if (of_device_is_compatible(np, "aspeed,ast2400-uhci") ||
+ of_device_is_compatible(np, "aspeed,ast2500-uhci")) {
+ uhci->is_aspeed = 1;
+ dev_info(&pdev->dev,
+ "Enabled Aspeed implementation workarounds\n");
+ }
+ }
ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
if (ret)
goto err_rmr;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fddf2731f798..2a82c927ded2 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -407,64 +407,17 @@ fail:
return NULL;
}
-void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
+void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
unsigned int ep_index)
{
- int rings_cached;
-
- rings_cached = virt_dev->num_rings_cached;
- if (rings_cached < XHCI_MAX_RINGS_CACHED) {
- virt_dev->ring_cache[rings_cached] =
- virt_dev->eps[ep_index].ring;
- virt_dev->num_rings_cached++;
- xhci_dbg(xhci, "Cached old ring, "
- "%d ring%s cached\n",
- virt_dev->num_rings_cached,
- (virt_dev->num_rings_cached > 1) ? "s" : "");
- } else {
- xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
- xhci_dbg(xhci, "Ring cache full (%d rings), "
- "freeing ring\n",
- virt_dev->num_rings_cached);
- }
+ xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
virt_dev->eps[ep_index].ring = NULL;
}
-/* Zero an endpoint ring (except for link TRBs) and move the enqueue and dequeue
- * pointers to the beginning of the ring.
- */
-static void xhci_reinit_cached_ring(struct xhci_hcd *xhci,
- struct xhci_ring *ring, unsigned int cycle_state,
- enum xhci_ring_type type)
-{
- struct xhci_segment *seg = ring->first_seg;
- int i;
-
- do {
- memset(seg->trbs, 0,
- sizeof(union xhci_trb)*TRBS_PER_SEGMENT);
- if (cycle_state == 0) {
- for (i = 0; i < TRBS_PER_SEGMENT; i++)
- seg->trbs[i].link.control |=
- cpu_to_le32(TRB_CYCLE);
- }
- /* All endpoint rings have link TRBs */
- xhci_link_segments(xhci, seg, seg->next, type);
- seg = seg->next;
- } while (seg != ring->first_seg);
- ring->type = type;
- xhci_initialize_ring_info(ring, cycle_state);
- /* td list should be empty since all URBs have been cancelled,
- * but just in case...
- */
- INIT_LIST_HEAD(&ring->td_list);
-}
-
/*
* Expand an existing ring.
- * Look for a cached ring or allocate a new ring which has same segment numbers
- * and link the two rings.
+ * Allocate a new ring which has same segment numbers and link the two rings.
*/
int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_trbs, gfp_t flags)
@@ -968,12 +921,6 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
/* If necessary, update the number of active TTs on this root port */
xhci_update_tt_active_eps(xhci, dev, old_active_eps);
- if (dev->ring_cache) {
- for (i = 0; i < dev->num_rings_cached; i++)
- xhci_ring_free(xhci, dev->ring_cache[i]);
- kfree(dev->ring_cache);
- }
-
if (dev->in_ctx)
xhci_free_container_ctx(xhci, dev->in_ctx);
if (dev->out_ctx)
@@ -1062,14 +1009,6 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
if (!dev->eps[0].ring)
goto fail;
- /* Allocate pointers to the ring cache */
- dev->ring_cache = kzalloc(
- sizeof(struct xhci_ring *)*XHCI_MAX_RINGS_CACHED,
- flags);
- if (!dev->ring_cache)
- goto fail;
- dev->num_rings_cached = 0;
-
dev->udev = udev;
/* Point to output device context in dcbaa. */
@@ -1537,17 +1476,9 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
/* Set up the endpoint ring */
virt_dev->eps[ep_index].new_ring =
xhci_ring_alloc(xhci, 2, 1, ring_type, max_packet, mem_flags);
- if (!virt_dev->eps[ep_index].new_ring) {
- /* Attempt to use the ring cache */
- if (virt_dev->num_rings_cached == 0)
- return -ENOMEM;
- virt_dev->num_rings_cached--;
- virt_dev->eps[ep_index].new_ring =
- virt_dev->ring_cache[virt_dev->num_rings_cached];
- virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
- xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
- 1, ring_type);
- }
+ if (!virt_dev->eps[ep_index].new_ring)
+ return -ENOMEM;
+
virt_dev->eps[ep_index].skip = false;
ep_ring = virt_dev->eps[ep_index].new_ring;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 03f63f50afb6..c50c902d009e 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -480,10 +480,34 @@ struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
return NULL;
}
+
+/*
+ * Get the hw dequeue pointer xHC stopped on, either directly from the
+ * endpoint context, or if streams are in use from the stream context.
+ * The returned hw_dequeue contains the lowest four bits with cycle state
+ * and possbile stream context type.
+ */
+static u64 xhci_get_hw_deq(struct xhci_hcd *xhci, struct xhci_virt_device *vdev,
+ unsigned int ep_index, unsigned int stream_id)
+{
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_stream_ctx *st_ctx;
+ struct xhci_virt_ep *ep;
+
+ ep = &vdev->eps[ep_index];
+
+ if (ep->ep_state & EP_HAS_STREAMS) {
+ st_ctx = &ep->stream_info->stream_ctx_array[stream_id];
+ return le64_to_cpu(st_ctx->stream_ring);
+ }
+ ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
+ return le64_to_cpu(ep_ctx->deq);
+}
+
/*
* Move the xHC's endpoint ring dequeue pointer past cur_td.
* Record the new state of the xHC's endpoint ring dequeue segment,
- * dequeue pointer, and new consumer cycle state in state.
+ * dequeue pointer, stream id, and new consumer cycle state in state.
* Update our internal representation of the ring's dequeue pointer.
*
* We do this in three jumps:
@@ -521,24 +545,15 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
stream_id);
return;
}
-
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding endpoint context");
- /* 4.6.9 the css flag is written to the stream context for streams */
- if (ep->ep_state & EP_HAS_STREAMS) {
- struct xhci_stream_ctx *ctx =
- &ep->stream_info->stream_ctx_array[stream_id];
- hw_dequeue = le64_to_cpu(ctx->stream_ring);
- } else {
- struct xhci_ep_ctx *ep_ctx
- = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
- hw_dequeue = le64_to_cpu(ep_ctx->deq);
- }
+ hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
new_seg = ep_ring->deq_seg;
new_deq = ep_ring->dequeue;
state->new_cycle_state = hw_dequeue & 0x1;
+ state->stream_id = stream_id;
/*
* We want to find the pointer, segment and cycle state of the new trb
@@ -691,7 +706,7 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
struct xhci_td *last_unlinked_td;
struct xhci_ep_ctx *ep_ctx;
struct xhci_virt_device *vdev;
-
+ u64 hw_deq;
struct xhci_dequeue_state deq_state;
if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) {
@@ -715,7 +730,6 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
if (list_empty(&ep->cancelled_td_list)) {
xhci_stop_watchdog_timer_in_irq(xhci, ep);
- ep->stopped_td = NULL;
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
return;
}
@@ -753,12 +767,19 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
* If we stopped on the TD we need to cancel, then we have to
* move the xHC endpoint ring dequeue pointer past this TD.
*/
- if (cur_td == ep->stopped_td)
+ hw_deq = xhci_get_hw_deq(xhci, vdev, ep_index,
+ cur_td->urb->stream_id);
+ hw_deq &= ~0xf;
+
+ if (trb_in_td(xhci, cur_td->start_seg, cur_td->first_trb,
+ cur_td->last_trb, hw_deq, false)) {
xhci_find_new_dequeue_state(xhci, slot_id, ep_index,
- cur_td->urb->stream_id,
- cur_td, &deq_state);
- else
+ cur_td->urb->stream_id,
+ cur_td, &deq_state);
+ } else {
td_to_noop(xhci, ep_ring, cur_td, false);
+ }
+
remove_finished_td:
/*
* The event handler won't see a completion for this TD anymore,
@@ -773,15 +794,13 @@ remove_finished_td:
/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
xhci_queue_new_dequeue_state(xhci, slot_id, ep_index,
- ep->stopped_td->urb->stream_id, &deq_state);
+ &deq_state);
xhci_ring_cmd_db(xhci);
} else {
/* Otherwise ring the doorbell(s) to restart queued transfers */
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
- ep->stopped_td = NULL;
-
/*
* Drop the lock and complete the URBs in the cancelled TD list.
* New TDs to be cancelled might be added to the end of the list before
@@ -1800,7 +1819,8 @@ struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
unsigned int stream_id,
- struct xhci_td *td, union xhci_trb *ep_trb)
+ struct xhci_td *td, union xhci_trb *ep_trb,
+ enum xhci_ep_reset_type reset_type)
{
struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
struct xhci_command *command;
@@ -1809,12 +1829,11 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
return;
ep->ep_state |= EP_HALTED;
- ep->stopped_stream = stream_id;
- xhci_queue_reset_ep(xhci, command, slot_id, ep_index);
- xhci_cleanup_stalled_ring(xhci, ep_index, td);
+ xhci_queue_reset_ep(xhci, command, slot_id, ep_index, reset_type);
- ep->stopped_stream = 0;
+ if (reset_type == EP_HARD_RESET)
+ xhci_cleanup_stalled_ring(xhci, ep_index, stream_id, td);
xhci_ring_cmd_db(xhci);
}
@@ -1909,7 +1928,7 @@ static int xhci_td_cleanup(struct xhci_hcd *xhci, struct xhci_td *td,
static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
union xhci_trb *ep_trb, struct xhci_transfer_event *event,
- struct xhci_virt_ep *ep, int *status, bool skip)
+ struct xhci_virt_ep *ep, int *status)
{
struct xhci_virt_device *xdev;
struct xhci_ep_ctx *ep_ctx;
@@ -1925,9 +1944,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
- if (skip)
- goto td_cleanup;
-
if (trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
trb_comp_code == COMP_STOPPED ||
trb_comp_code == COMP_STOPPED_SHORT_PACKET) {
@@ -1935,7 +1951,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
* stopped TDs. A stopped TD may be restarted, so don't update
* the ring dequeue pointer or take this TD off any lists yet.
*/
- ep->stopped_td = td;
return 0;
}
if (trb_comp_code == COMP_STALL_ERROR ||