diff options
Diffstat (limited to 'drivers/usb/misc')
| -rw-r--r-- | drivers/usb/misc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/misc/ftdi-elan.c | 4 | ||||
| -rw-r--r-- | drivers/usb/misc/onboard_usb_hub.c | 2 | ||||
| -rw-r--r-- | drivers/usb/misc/onboard_usb_hub.h | 5 | ||||
| -rw-r--r-- | drivers/usb/misc/sisusbvga/Kconfig | 34 | ||||
| -rw-r--r-- | drivers/usb/misc/sisusbvga/Makefile | 3 | ||||
| -rw-r--r-- | drivers/usb/misc/sisusbvga/sisusb.h | 21 | ||||
| -rw-r--r-- | drivers/usb/misc/sisusbvga/sisusb_con.c | 1496 | ||||
| -rw-r--r-- | drivers/usb/misc/sisusbvga/sisusb_init.c | 955 | ||||
| -rw-r--r-- | drivers/usb/misc/sisusbvga/sisusb_init.h | 180 | ||||
| -rw-r--r-- | drivers/usb/misc/sisusbvga/sisusbvga.c (renamed from drivers/usb/misc/sisusbvga/sisusb.c) | 289 | ||||
| -rw-r--r-- | drivers/usb/misc/usb251xb.c | 5 | ||||
| -rw-r--r-- | drivers/usb/misc/usb3503.c | 5 | ||||
| -rw-r--r-- | drivers/usb/misc/usb4604.c | 5 |
14 files changed, 21 insertions, 2985 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 9367c12c7e6f..a5f7652db7da 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -298,7 +298,7 @@ config BRCM_USB_PINMAP config USB_ONBOARD_HUB tristate "Onboard USB hub support" - depends on OF || COMPILE_TEST + depends on OF help Say Y here if you want to support discrete onboard USB hubs that don't require an additional control bus for initialization, but diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index b2f980409d0b..8ce191e3a4c0 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -1624,7 +1624,6 @@ wait:if (ftdi->disconnected > 0) { char data[30 *3 + 4]; char *d = data; int m = (sizeof(data) - 1) / 3 - 1; - int l = 0; struct u132_target *target = &ftdi->target[ed]; struct u132_command *command = &ftdi->command[ COMMAND_MASK & ftdi->command_next]; @@ -1647,7 +1646,6 @@ wait:if (ftdi->disconnected > 0) { } else if (i++ < m) { int w = sprintf(d, " %02X", *b++); d += w; - l += w; } else d += sprintf(d, " .."); } @@ -1956,7 +1954,6 @@ static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) int long_stop = 10; int retry_on_timeout = 5; int retry_on_empty = 10; - int err_count = 0; retval = ftdi_elan_flush_input_fifo(ftdi); if (retval) return retval; @@ -2051,7 +2048,6 @@ static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) continue; } } else { - err_count += 1; dev_err(&ftdi->udev->dev, "error = %d\n", retval); if (read_stop-- > 0) { diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c index d63c63942af1..94e7966e199d 100644 --- a/drivers/usb/misc/onboard_usb_hub.c +++ b/drivers/usb/misc/onboard_usb_hub.c @@ -331,6 +331,7 @@ static struct platform_driver onboard_hub_driver = { /************************** USB driver **************************/ +#define VENDOR_ID_GENESYS 0x05e3 #define VENDOR_ID_MICROCHIP 0x0424 #define VENDOR_ID_REALTEK 0x0bda #define VENDOR_ID_TI 0x0451 @@ -407,6 +408,7 @@ static void onboard_hub_usbdev_disconnect(struct usb_device *udev) } static const struct usb_device_id onboard_hub_id_table[] = { + { USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */ { USB_DEVICE(VENDOR_ID_MICROCHIP, 0x2514) }, /* USB2514B USB 2.0 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */ diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h index 34beab8bce3d..62129a6a1ba5 100644 --- a/drivers/usb/misc/onboard_usb_hub.h +++ b/drivers/usb/misc/onboard_usb_hub.h @@ -22,10 +22,15 @@ static const struct onboard_hub_pdata ti_tusb8041_data = { .reset_us = 3000, }; +static const struct onboard_hub_pdata genesys_gl850g_data = { + .reset_us = 3, +}; + static const struct of_device_id onboard_hub_match[] = { { .compatible = "usb424,2514", .data = µchip_usb424_data, }, { .compatible = "usb451,8140", .data = &ti_tusb8041_data, }, { .compatible = "usb451,8142", .data = &ti_tusb8041_data, }, + { .compatible = "usb5e3,608", .data = &genesys_gl850g_data, }, { .compatible = "usbbda,411", .data = &realtek_rts5411_data, }, { .compatible = "usbbda,5411", .data = &realtek_rts5411_data, }, { .compatible = "usbbda,414", .data = &realtek_rts5411_data, }, diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig index c12cdd015410..42f81c8eaa92 100644 --- a/drivers/usb/misc/sisusbvga/Kconfig +++ b/drivers/usb/misc/sisusbvga/Kconfig @@ -3,7 +3,6 @@ config USB_SISUSBVGA tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)" depends on (USB_MUSB_HDRC || USB_EHCI_HCD) - select FONT_SUPPORT if USB_SISUSBVGA_CON help Say Y here if you intend to attach a USB2VGA dongle based on a Net2280 and a SiS315 chip. @@ -13,36 +12,3 @@ config USB_SISUSBVGA To compile this driver as a module, choose M here; the module will be called sisusbvga. If unsure, say N. - -config USB_SISUSBVGA_CON - bool "Text console and mode switching support" if USB_SISUSBVGA - depends on VT && BROKEN - select FONT_8x16 - help - Say Y here if you want a VGA text console via the USB dongle or - want to support userland applications that utilize the driver's - display mode switching capabilities. - - Note that this console supports VGA/EGA text mode only. - - By default, the console part of the driver will not kick in when - the driver is initialized. If you want the driver to take over - one or more of the consoles, you need to specify the number of - the first and last consoles (starting at 1) as driver parameters. - - For example, if the driver is compiled as a module: - - modprobe sisusbvga first=1 last=5 - - If you use hotplug, add this to your modutils config files with - the "options" keyword, such as eg. - - options sisusbvga first=1 last=5 - - If the driver is compiled into the kernel image, the parameters - must be given in the kernel command like, such as - - sisusbvga.first=1 sisusbvga.last=5 - - - diff --git a/drivers/usb/misc/sisusbvga/Makefile b/drivers/usb/misc/sisusbvga/Makefile index 6551bce68ac5..28aa1e6ef823 100644 --- a/drivers/usb/misc/sisusbvga/Makefile +++ b/drivers/usb/misc/sisusbvga/Makefile @@ -4,6 +4,3 @@ # obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga.o - -sisusbvga-y := sisusb.o -sisusbvga-$(CONFIG_USB_SISUSBVGA_CON) += sisusb_con.o sisusb_init.o diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h index c0fb9e1c5361..e5b1228655d0 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.h +++ b/drivers/usb/misc/sisusbvga/sisusb.h @@ -48,7 +48,6 @@ /* Include console and mode switching code? */ -#include <linux/console.h> #include <linux/vt_kern.h> #include "sisusb_struct.h" @@ -126,26 +125,6 @@ struct sisusb_usb_data { unsigned char gfxinit; /* graphics core initialized? */ unsigned short chipid, chipvendor; unsigned short chiprevision; -#ifdef CONFIG_USB_SISUSBVGA_CON - struct SiS_Private *SiS_Pr; - unsigned long scrbuf; - unsigned int scrbuf_size; - int haveconsole, con_first, con_last; - int havethisconsole[MAX_NR_CONSOLES]; - int textmodedestroyed; - unsigned int sisusb_num_columns; /* real number, not vt's idea */ - int cur_start_addr, con_rolled_over; - int sisusb_cursor_loc, bad_cursor_pos; - int sisusb_cursor_size_from; - int sisusb_cursor_size_to; - int current_font_height, current_font_512; - int font_backup_size, font_backup_height, font_backup_512; - char *font_backup; - int font_slot; - struct vc_data *sisusb_display_fg; - int is_gfx; - int con_blanked; -#endif }; #define to_sisusb_dev(d) container_of(d, struct sisusb_usb_data, kref) diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c deleted file mode 100644 index fcb95fb639e0..000000000000 --- a/drivers/usb/misc/sisusbvga/sisusb_con.c +++ /dev/null @@ -1,1496 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) -/* - * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles - * - * VGA text mode console part - * - * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria - * - * If distributed as part of the Linux kernel, this code is licensed under the - * terms of the GPL v2. - * - * Otherwise, the following license terms apply: - * - * * Redistribution and use in source and binary forms, with or without - * * modification, are permitted provided that the following conditions - * * are met: - * * 1) Redistributions of source code must retain the above copyright - * * notice, this list of conditions and the following disclaimer. - * * 2) Redistributions in binary form must reproduce the above copyright - * * notice, this list of conditions and the following disclaimer in the - * * documentation and/or other materials provided with the distribution. - * * 3) The name of the author may not be used to endorse or promote products - * * derived from this software without specific psisusbr written permission. - * * - * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR - * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Author: Thomas Winischhofer <thomas@winischhofer.net> - * - * Portions based on vgacon.c which are - * Created 28 Sep 1997 by Geert Uytterhoeven - * Rewritten by Martin Mares <mj@ucw.cz>, July 1998 - * based on code Copyright (C) 1991, 1992 Linus Torvalds - * 1995 Jay Estabrook - * - * A note on using in_atomic() in here: We can't handle console - * calls from non-schedulable context due to our USB-dependend - * nature. For now, this driver just ignores any calls if it - * detects this state. - * - */ - -#include <linux/mutex.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/fs.h> -#include <linux/usb.h> -#include <linux/tty.h> -#include <linux/console.h> -#include <linux/string.h> -#include <linux/kd.h> -#include <linux/init.h> -#include <linux/vt_kern.h> -#include <linux/selection.h> -#include <linux/spinlock.h> -#include <linux/kref.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/vmalloc.h> - -#include "sisusb.h" -#include "sisusb_init.h" - -/* vc_data -> sisusb conversion table */ -static struct sisusb_usb_data *mysisusbs[MAX_NR_CONSOLES]; - -/* Forward declaration */ -static const struct consw sisusb_con; - -static inline void -sisusbcon_memsetw(u16 *s, u16 c, unsigned int count) -{ - memset16(s, c, count / 2); -} - -static inline void -sisusb_initialize(struct sisusb_usb_data *sisusb) -{ - /* Reset cursor and start address */ - if (sisusb_setidxreg(sisusb, SISCR, 0x0c, 0x00)) - return; - if (sisusb_setidxreg(sisusb, SISCR, 0x0d, 0x00)) - return; - if (sisusb_setidxreg(sisusb, SISCR, 0x0e, 0x00)) - return; - sisusb_setidxreg(sisusb, SISCR, 0x0f, 0x00); -} - -static inline void -sisusbcon_set_start_address(struct sisusb_usb_data *sisusb, struct vc_data *c) -{ - sisusb->cur_start_addr = (c->vc_visible_origin - sisusb->scrbuf) / 2; - - sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8)); - sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff)); -} - -void -sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location) -{ - if (sisusb->sisusb_cursor_loc == location) - return; - - sisusb->sisusb_cursor_loc = location; - - /* Hardware bug: Text cursor appears twice or not at all - * at some positions. Work around it with the cursor skew - * bits. - */ - - if ((location & 0x0007) == 0x0007) { - sisusb->bad_cursor_pos = 1; - location--; - if (sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0x1f, 0x20)) - return; - } else if (sisusb->bad_cursor_pos) { - if (sisusb_setidxregand(sisusb, SISCR, 0x0b, 0x1f)) - return; - sisusb->bad_cursor_pos = 0; - } - - if (sisusb_setidxreg(sisusb, SISCR, 0x0e, (location >> 8))) - return; - sisusb_setidxreg(sisusb, SISCR, 0x0f, (location & 0xff)); -} - -static inline struct sisusb_usb_data * -sisusb_get_sisusb(unsigned short console) -{ - return mysisusbs[console]; -} - -static inline int -sisusb_sisusb_valid(struct sisusb_usb_data *sisusb) -{ - if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) - return 0; - - return 1; -} - -static struct sisusb_usb_data * -sisusb_get_sisusb_lock_and_check(unsigned short console) -{ - struct sisusb_usb_data *sisusb; - - /* We can't handle console calls in non-schedulable - * context due to our locks and the USB transport. - * So we simply ignore them. This should only affect - * some calls to printk. - */ - if (in_atomic()) - return NULL; - - sisusb = sisusb_get_sisusb(console); - if (!sisusb) - return NULL; - - mutex_lock(&sisusb->lock); - - if (!sisusb_sisusb_valid(sisusb) || - !sisusb->havethisconsole[console]) { - mutex_unlock(&sisusb->lock); - return NULL; - } - - return sisusb; -} - -static int -sisusb_is_inactive(struct vc_data *c, struct sisusb_usb_data *sisusb) -{ - if (sisusb->is_gfx || - sisusb->textmodedestroyed || - c->vc_mode != KD_TEXT) - return 1; - - return 0; -} - -/* con_startup console interface routine */ -static const char * -sisusbcon_startup(void) -{ - return "SISUSBCON"; -} - -/* con_init console interface routine */ -static void -sisusbcon_init(struct vc_data *c, int init) -{ - struct sisusb_usb_data *sisusb; - int cols, rows; - - /* This is called by do_take_over_console(), - * ie by us/under our control. It is - * only called after text mode and fonts - * are set up/restored. - */ - - sisusb = sisusb_get_sisusb(c->vc_num); - if (!sisusb) - return; - - mutex_lock(&sisusb->lock); - - if (!sisusb_sisusb_valid(sisusb)) { - mutex_unlock(&sisusb->lock); - return; - } - - c->vc_can_do_color = 1; - - c->vc_complement_mask = 0x7700; - - c->vc_hi_font_mask = sisusb->current_font_512 ? 0x0800 : 0; - - sisusb->haveconsole = 1; - - sisusb->havethisconsole[c->vc_num] = 1; - - /* We only support 640x400 */ - c->vc_scan_lines = 400; - - c->vc_font.height = sisusb->current_font_height; - - /* We only support width = 8 */ - cols = 80; - rows = c->vc_scan_lines / c->vc_font.height; - - /* Increment usage count for our sisusb. - * Doing so saves us from upping/downing - * the disconnect semaphore; we can't - * lose our sisusb until this is undone - * in con_deinit. For all other console - * interface functions, it suffices to - * use sisusb->lock and do a quick check - * of sisusb for device disconnection. - */ - kref_get(&sisusb->kref); - - if (!*c->uni_pagedict_loc) - con_set_default_unimap(c); - - mutex_unlock(&sisusb->lock); - - if (init) { - c->vc_cols = cols; - c->vc_rows = rows; - } else - vc_resize(c, cols, rows); -} - -/* con_deinit console interface routine */ -static void -sisusbcon_deinit(struct vc_data *c) -{ - struct sisusb_usb_data *sisusb; - int i; - - /* This is called by do_take_over_console() - * and others, ie not under our control. - */ - - sisusb = sisusb_get_sisusb(c->vc_num); - if (!sisusb) - return; - - mutex_lock(&sisusb->lock); - - /* Clear ourselves in mysisusbs */ - mysisusbs[c->vc_num] = NULL; - - sisusb->havethisconsole[c->vc_num] = 0; - - /* Free our font buffer if all consoles are gone */ - if (sisusb->font_backup) { - for(i = 0; i < MAX_NR_CONSOLES; i++) { - if (sisusb->havethisconsole[c->vc_num]) - break; - } - if (i == MAX_NR_CONSOLES) { - vfree(sisusb->font_backup); - sisusb->font_backup = NULL; - } - } - - mutex_unlock(&sisusb->lock); - - /* decrement the usage count on our sisusb */ - kref_put(&sisusb->kref, sisusb_delete); -} - -/* interface routine */ -static u8 -sisusbcon_build_attr(struct vc_data *c, u8 color, enum vc_intensity intensity, - bool blink, bool underline, bool reverse, - bool unused) -{ - u8 attr = color; - - if (underline) - attr = (attr & 0xf0) | c->vc_ulcolor; - else if (intensity == VCI_HALF_BRIGHT) - attr = (attr & 0xf0) | c->vc_halfcolor; - - if (reverse) - attr = ((attr) & 0x88) | - ((((attr) >> 4) | - ((attr) << 4)) & 0x77); - - if (blink) - attr ^= 0x80; - - if (intensity == VCI_BOLD) - attr ^= 0x08; - - return attr; -} - -/* Interface routine */ -static void -sisusbcon_invert_region(struct vc_data *vc, u16 *p, int count) -{ - /* Invert a region. This is called with a pointer - * to the console's internal screen buffer. So we - * simply do the inversion there and rely on - * a call to putc(s) to update the real screen. - */ - - while (count--) { - u16 a = *p; - - *p++ = ((a) & 0x88ff) | - (((a) & 0x7000) >> 4) | - (((a) & 0x0700) << 4); - } -} - -static inline void *sisusb_vaddr(const struct sisusb_usb_data *sisusb, - const struct vc_data *c, unsigned int x, unsigned int y) -{ - return (u16 *)c->vc_origin + y * sisusb->sisusb_num_columns + x; -} - -static inline unsigned long sisusb_haddr(const struct sisusb_usb_data *sisusb, - const struct vc_data *c, unsigned int x, unsigned int y) -{ - unsigned long offset = c->vc_origin - sisusb->scrbuf; - - /* 2 bytes per each character */ - offset += 2 * (y * sisusb->sisusb_num_columns + x); - - return sisusb->vrambase + offset; -} - -/* Interface routine */ -static void -sisusbcon_putc(struct vc_data *c, int ch, int y, int x) -{ - struct sisusb_usb_data *sisusb; - - sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); - if (!sisusb) - return; - - /* sisusb->lock is down */ - if (sisusb_is_inactive(c, sisusb)) { - mutex_unlock(&sisusb->lock); - return; - } - - sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, x, y), - sisusb_haddr(sisusb, c, x, y), 2); - - mutex_unlock(&sisusb->lock); -} - -/* Interface routine */ -static void -sisusbcon_putcs(struct vc_data *c, const unsigned short *s, - int count, int y, int x) -{ - struct sisusb_usb_data *sisusb; - - sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); - if (!sisusb) - return; - - /* sisusb->lock is down */ - - /* Need to put the characters into the buffer ourselves, - * because the vt does this AFTER calling us. - */ - - memcpy(sisusb_vaddr(sisusb, c, x, y), s, count * 2); - - if (sisusb_is_inactive(c, sisusb)) { - mutex_unlock(&sisusb->lock); - return; - } - - sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, x, y), - sisusb_haddr(sisusb, c, x, y), count * 2); - - mutex_unlock(&sisusb->lock); -} - -/* Interface routine */ -static void -sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width) -{ - struct sisusb_usb_data *sisusb; - u16 eattr = c->vc_video_erase_char; - int i, length, cols; - u16 *dest; - - if (width <= 0 || height <= 0) - return; - - sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); - if (!sisusb) - return; - - /* sisusb->lock is down */ - - /* Need to clear buffer ourselves, because the vt does - * this AFTER calling us. - */ - - dest = sisusb_vaddr(sisusb, c, x, y); - - cols = sisusb->sisusb_num_columns; - - if (width > cols) - width = cols; - - if (x == 0 && width >= c->vc_cols) { - - sisusbcon_memsetw(dest, eattr, height * cols * 2); - - } else { - - for (i = height; i > 0; i--, dest += cols) - sisusbcon_memsetw(dest, eattr, width * 2); - - } - - if (sisusb_is_inactive(c, sisusb)) { - mutex_unlock(&sisusb->lock); - return; - } - - length = ((height * cols) - x - (cols - width - x)) * 2; - - - sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, x, y), - sisusb_haddr(sisusb, c, x, y), length); - - mutex_unlock(&sisusb->lock); -} - -/* interface routine */ -static int -sisusbcon_switch(struct vc_data *c) -{ - struct sisusb_usb_data *sisusb; - int length; - - /* Returnvalue 0 means we have fully restored screen, - * and vt doesn't need to call do_update_region(). - * Returnvalue != 0 naturally means the opposite. - */ - - sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); - if (!sisusb) - return 0; - - /* sisusb->lock is down */ - - /* Don't write to screen if in gfx mode */ - if (sisusb_is_inactive(c, sisusb)) { - mutex_unlock(&sisusb->lock); - return 0; - } - - /* That really should not happen. It would mean we are - * being called while the vc is using its private buffer - * as origin. - */ - if (c->vc_origin == (unsigned long)c->vc_screenbuf) { - mutex_unlock(&sisusb->lock); - dev_dbg(&sisusb->sisusb_dev->dev, "ASSERT ORIGIN != SCREENBUF!\n"); - return 0; - } - - /* Check that we don't copy too much */ - length = min((int)c->vc_screenbuf_size, - (int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin)); - - /* Restore the screen contents */ - memcpy((u16 *)c->vc_origin, (u16 *)c->vc_screenbuf, length); - - sisusb_copy_memory(sisusb, (u8 *)c->vc_origin, - sisusb_haddr(sisusb, c, 0, 0), length); - - mutex_unlock(&sisusb->lock); - - return 0; -} - -/* interface routine */ -static void -sisusbcon_save_screen(struct vc_data *c) -{ - struct sisusb_usb_data *sisusb; - int length; - - /* Save the current screen contents to vc's private - * buffer. - */ - - sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); - if (!sisusb) - return; - - /* sisusb->lock is down */ - - if (sisusb_is_inactive(c, sisusb)) { - mutex_unlock(&sisusb->lock); - return; - } - - /* Check that we don't copy too much */ - length = min((int)c->vc_screenbuf_size, - (int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin)); - - /* Save the screen contents to vc's private buffer */ - memcpy((u16 *)c->vc_screenbuf, (u16 *)c->vc_origin, length); - - mutex_unlock(&sisusb->lock); -} - -/* interface routine */ -static void -sisusbcon_set_palette(struct vc_data *c, const unsigned char *table) -{ - struct sisusb_usb_data *sisusb; - int i, j; - - /* Return value not used by vt */ - - if (!con_is_visible(c)) - return; - - sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); - if (!sisusb) - return; - - /* sisusb->lock is down */ - - if (sisusb_is_inactive(c, sisusb)) { - mutex_unlock(&sisusb->lock); - return; - } - - for (i = j = 0; i < 16; i++) { - if (sisusb_setreg(sisusb, SISCOLIDX, table[i])) - break; - if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) - break; - if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) - break; - if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) - break; - } - - mutex_unlock(&sisusb->lock); -} - -/* interface routine */ -static int -sisusbcon_blank(struct vc_data *c, int blank, int mode_switch) -{ - struct sisusb_usb_data *sisusb; - u8 sr1, cr17, pmreg, cr63; - int ret = 0; - - sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); - if (!sisusb) - return 0; - - /* sisusb->lock is down */ - - if (mode_switch) - sisusb->is_gfx = blank ? 1 : 0; - - if (sisusb_is_inactive(c, sisusb)) { - mutex_unlock(&sisusb->lock); - return 0; - } - - switch (blank) { - - case 1: /* Normal blanking: Clear screen */ - case -1: - sisusbcon_memsetw((u16 *)c->vc_origin, - c->vc_video_erase_char, - c->vc_screenbuf_size); - sisusb_copy_memory(sisusb, (u8 *)c->vc_origin, - sisusb_haddr(sisusb, c, 0, 0), - c->vc_screenbuf_size); - sisusb->con_blanked = 1; - ret = 1; - break; - - default: /* VESA blanking */ - switch (blank) { - case 0: /* Unblank */ - sr1 = 0x00; - cr17 = 0x80; - pmreg = 0x00; - cr63 = 0x00; - ret = 1; - sisusb->con_blanked = 0; - break; - case VESA_VSYNC_SUSPEND + 1: - sr1 = 0x20; - cr17 = 0x80; - pmreg = 0x80; - cr63 = 0x40; - break; - case VESA_HSYNC_SUSPEND + 1: - sr1 = 0x20; - cr17 = 0x80; - pmreg = 0x40; - cr63 = 0x40; - break; - case VESA_POWERDOWN + 1: - sr1 = 0x20; - cr17 = 0x00; - pmreg = 0xc0; - cr63 = 0x40; - break; - default: - mutex_unlock(&sisusb->lock); - return -EINVAL; - } - - sisusb_setidxregandor(sisusb, SISSR, 0x01, ~0x20, sr1); - sisusb_setidxregandor(sisusb, SISCR, 0x17, 0x7f, cr17); - sisusb_setidxregandor(sisusb, SISSR, 0x1f, 0x3f, pmreg); - sisusb_setidxregandor(sisusb, SISCR, 0x63, 0xbf, cr63); - - } - - mutex_unlock(&sisusb->lock); - - return ret; -} - -/* interface routine */ -static void -sisusbcon_scrolldelta(struct vc_data *c, int lines) -{ - struct sisusb_usb_data *sisusb; - - sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); - if (!sisusb) - return; - - /* sisusb->lock is down */ - - if (sisusb_is_inactive(c, sisusb)) { - mutex_unlock(&sisusb->lock); - return; - } - - vc_scrolldelta_helper(c, lines, sisusb->con_rolled_over, - (void *)sisusb->scrbuf, sisusb->scrbuf_size); - - sisusbcon_set_start_address(sisusb, c); - - mutex_unlock(&sisusb->lock); -} - -/* Interface routine */ -static void -sisusbcon_cursor(struct vc_data *c, int mode) -{ - struct sisusb_usb_data *sisusb; - int from, to, baseline; - - sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); - if (!sisusb) - return; - - /* sisusb->lock is down */ - - if (sisusb_is_inactive(c, sisusb)) { - mutex_unlock(&sisusb->lock); - return; - } - - if (c->vc_origin != c->vc_visible_origin) { - c->vc_visible_origin = c->vc_origin; - sisusbcon_set_start_address(sisusb, c); - } - - if (mode == CM_ERASE) { - sisusb_setidxregor(sisusb, SISCR, 0x0a, 0x20); - sisusb->sisusb_cursor_size_to = -1; - mutex_unlock(&sisusb->lock); - return; - } - - sisusb_set_cursor(sisusb, (c->vc_pos - sisusb->scrbuf) / 2); - - baseline = c->vc_font.height - (c->vc_font.height < 10 ? 1 : 2); - - switch (CUR_SIZE(c->vc_cursor_type)) { - case CUR_BLOCK: from = 1; - to = c->vc_font.height; - break; - case CUR_TWO_THIRDS: from = c->vc_font.height / 3; - to = baseline; - break; - case CUR_LOWER_HALF: from = c->vc_font.height / 2; - to = baseline; - break; - case CUR_LOWER_THIRD: from = (c->vc_font.height * 2) / 3; - to = baseline; - break; - case CUR_NONE: from = 31; - to = 30; - break; - default: - case CUR_UNDERLINE: from = baseline - 1; - to = baseline; - break; - } - - if (sisusb->sisusb_cursor_size_from != from || - sisusb->sisusb_cursor_size_to != to) { - - sisusb_setidxreg(sisusb, SISCR, 0x0a, from); - sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0, to); - - sisusb->sisusb_cursor_size_from = from; - sisusb->sisusb_cursor_size_to = to; - } - - mutex_unlock(&sisusb->lock); -} - -static bool -sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb, - unsigned int t, unsigned int b, enum con_scroll dir, - unsigned int lines) -{ - int cols = sisusb->sisusb_num_columns; - int length = ((b - t) * cols) * 2; - u16 eattr = c->vc_video_erase_char; - - /* sisusb->lock is down */ - - /* Scroll an area which does not match the - * visible screen's dimensions. This needs - * to be done separately, as it does not - * use hardware panning. - */ - - switch (dir) { - - case SM_UP: - memmove(sisusb_vaddr(sisusb, c, 0, t), - sisusb_vaddr(sisusb, c, 0, t + lines), - (b - t - lines) * cols * 2); - sisusbcon_memsetw(sisusb_vaddr(sisusb, c, 0, b - lines), - eattr, lines * cols * 2); - break; - - case SM_DOWN: - memmove(sisusb_vaddr(sisusb, c, 0, t + lines), - sisusb_vaddr(sisusb, c, 0, t), - (b - t - lines) * cols * 2); - sisusbcon_memsetw(sisusb_vaddr(sisusb, c, 0, t), eattr, - lines * cols * 2); - break; - } - - sisusb_copy_memory(sisusb, sisusb_vaddr(sisusb, c, 0, t), - sisusb_haddr(sisusb, c, 0, t), length); - - mutex_unlock(&sisusb->lock); - - return true; -} - -/* Interface routine */ -static bool -sisusbcon_scroll(struct vc_data *c, unsigned int t, unsigned int b, - enum con_scroll dir, unsigned int lines) -{ - struct sisusb_usb_data *sisusb; - u16 eattr = c->vc_video_erase_char; - int copyall = 0; - unsigned long oldorigin; - unsigned int delta = lines * c->vc_size_row; - - /* Returning != 0 means we have done the scrolling successfully. - * Returning 0 makes vt do the scrolling on its own. - * Note that con_scroll is only called if the console is - * visible. In that case, the origin should be our buffer, - * not the vt's private one. - */ - - if (!lines) - return true; - - sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num); - if (!sisusb) - return false; - - /* sisusb->lock is down */ - - if (sisusb_is_inactive(c, sisusb)) { - mutex_unlock(&sisusb->lock); - return false; - } - - /* Special case */ - if (t || b != c->vc_rows) - return sisusbcon_scroll_area(c, sisusb, t, b, dir, lines); - - if (c->vc_origin != c->vc_visible_origin) { - c->vc_visible_origin = c->vc_origin; |