diff options
Diffstat (limited to 'drivers')
87 files changed, 645 insertions, 917 deletions
diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 70b00ae4ec38..8af793f5e811 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -1690,7 +1690,7 @@ he_service_rbrq(struct he_dev *he_dev, int group) if (RBRQ_HBUF_ERR(he_dev->rbrq_head)) { hprintk("HBUF_ERR! (cid 0x%x)\n", cid); - atomic_inc(&vcc->stats->rx_drop); + atomic_inc(&vcc->stats->rx_drop); goto return_host_buffers; } diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index 1dd467bed8fc..6d7ec371e7b2 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -352,7 +352,7 @@ static bool has_gateway(const struct dst_entry *dst, sa_family_t family) if (family == AF_INET) { rt = container_of(dst, struct rtable, dst); - return rt->rt_gw_family == AF_INET; + return rt->rt_uses_gateway; } rt6 = container_of(dst, struct rt6_info, dst); diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c index c6ba37df4b9d..dff4132b3702 100644 --- a/drivers/isdn/mISDN/socket.c +++ b/drivers/isdn/mISDN/socket.c @@ -754,6 +754,8 @@ base_sock_create(struct net *net, struct socket *sock, int protocol, int kern) if (sock->type != SOCK_RAW) return -ESOCKTNOSUPPORT; + if (!capable(CAP_NET_RAW)) + return -EPERM; sk = sk_alloc(net, PF_ISDN, GFP_KERNEL, &mISDN_proto, kern); if (!sk) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 48e209e55843..df1c7989e13d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -487,7 +487,7 @@ config FUJITSU_ES depends on ACPI help This driver provides support for Extended Socket network device - on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series. + on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series. config THUNDERBOLT_NET tristate "Networking over Thunderbolt cable" diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index faeb4419b205..27551bf3d7e4 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -56,19 +56,19 @@ config ARCNET_CAP tristate "Enable CAP mode packet interface" help ARCnet "cap mode" packet encapsulation. Used to get the hardware - acknowledge back to userspace. After the initial protocol byte every - packet is stuffed with an extra 4 byte "cookie" which doesn't - actually appear on the network. After transmit the driver will send - back a packet with protocol byte 0 containing the status of the - transmission: - 0=no hardware acknowledge - 1=excessive nak - 2=transmission accepted by the receiver hardware - - Received packets are also stuffed with the extra 4 bytes but it will - be random data. - - Cap only listens to protocol 1-8. + acknowledge back to userspace. After the initial protocol byte every + packet is stuffed with an extra 4 byte "cookie" which doesn't + actually appear on the network. After transmit the driver will send + back a packet with protocol byte 0 containing the status of the + transmission: + 0=no hardware acknowledge + 1=excessive nak + 2=transmission accepted by the receiver hardware + + Received packets are also stuffed with the extra 4 bytes but it will + be random data. + + Cap only listens to protocol 1-8. config ARCNET_COM90xx tristate "ARCnet COM90xx (normal) chipset driver" diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index 8459115d9d4e..553776cc1d29 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -1063,31 +1063,34 @@ EXPORT_SYMBOL(arcnet_interrupt); static void arcnet_rx(struct net_device *dev, int bufnum) { struct arcnet_local *lp = netdev_priv(dev); - struct archdr pkt; + union { + struct archdr pkt; + char buf[512]; + } rxdata; struct arc_rfc1201 *soft; int length, ofs; - soft = &pkt.soft.rfc1201; + soft = &rxdata.pkt.soft.rfc1201; - lp->hw.copy_from_card(dev, bufnum, 0, &pkt, ARC_HDR_SIZE); - if (pkt.hard.offset[0]) { - ofs = pkt.hard.offset[0]; + lp->hw.copy_from_card(dev, bufnum, 0, &rxdata.pkt, ARC_HDR_SIZE); + if (rxdata.pkt.hard.offset[0]) { + ofs = rxdata.pkt.hard.offset[0]; length = 256 - ofs; } else { - ofs = pkt.hard.offset[1]; + ofs = rxdata.pkt.hard.offset[1]; length = 512 - ofs; } /* get the full header, if possible */ - if (sizeof(pkt.soft) <= length) { - lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(pkt.soft)); + if (sizeof(rxdata.pkt.soft) <= length) { + lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(rxdata.pkt.soft)); } else { - memset(&pkt.soft, 0, sizeof(pkt.soft)); + memset(&rxdata.pkt.soft, 0, sizeof(rxdata.pkt.soft)); lp->hw.copy_from_card(dev, bufnum, ofs, soft, length); } arc_printk(D_DURING, dev, "Buffer #%d: received packet from %02Xh to %02Xh (%d+4 bytes)\n", - bufnum, pkt.hard.source, pkt.hard.dest, length); + bufnum, rxdata.pkt.hard.source, rxdata.pkt.hard.dest, length); dev->stats.rx_packets++; dev->stats.rx_bytes += length + ARC_HDR_SIZE; @@ -1096,13 +1099,13 @@ static void arcnet_rx(struct net_device *dev, int bufnum) if (arc_proto_map[soft->proto]->is_ip) { if (BUGLVL(D_PROTO)) { struct ArcProto - *oldp = arc_proto_map[lp->default_proto[pkt.hard.source]], + *oldp = arc_proto_map[lp->default_proto[rxdata.pkt.hard.source]], *newp = arc_proto_map[soft->proto]; if (oldp != newp) { arc_printk(D_PROTO, dev, "got protocol %02Xh; encap for host %02Xh is now '%c' (was '%c')\n", - soft->proto, pkt.hard.source, + soft->proto, rxdata.pkt.hard.source, newp->suffix, oldp->suffix); } } @@ -1111,10 +1114,10 @@ static void arcnet_rx(struct net_device *dev, int bufnum) lp->default_proto[0] = soft->proto; /* in striking contrast, the following isn't a hack. */ - lp->default_proto[pkt.hard.source] = soft->proto; + lp->default_proto[rxdata.pkt.hard.source] = soft->proto; } /* call the protocol-specific receiver. */ - arc_proto_map[soft->proto]->rx(dev, bufnum, &pkt, length); + arc_proto_map[soft->proto]->rx(dev, bufnum, &rxdata.pkt, length); } static void null_rx(struct net_device *dev, int bufnum, diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index 4b3d0ddcda79..b412f7ba4f89 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -15,10 +15,10 @@ config CAN_EMS_USB from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). config CAN_ESD_USB2 - tristate "ESD USB/2 CAN/USB interface" - ---help--- - This driver supports the CAN-USB/2 interface - from esd electronic system design gmbh (http://www.esd.eu). + tristate "ESD USB/2 CAN/USB interface" + ---help--- + This driver supports the CAN-USB/2 interface + from esd electronic system design gmbh (http://www.esd.eu). config CAN_GS_USB tristate "Geschwister Schneider UG interfaces" diff --git a/drivers/net/dsa/b53/b53_serdes.h b/drivers/net/dsa/b53/b53_serdes.h index 3bb4f91aec9e..55d280fe38e4 100644 --- a/drivers/net/dsa/b53/b53_serdes.h +++ b/drivers/net/dsa/b53/b53_serdes.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause - * +/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* * Northstar Plus switch SerDes/SGMII PHY definitions * * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com> diff --git a/drivers/net/dsa/lantiq_pce.h b/drivers/net/dsa/lantiq_pce.h index 180663138e75..e2be31f3672a 100644 --- a/drivers/net/dsa/lantiq_pce.h +++ b/drivers/net/dsa/lantiq_pce.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * PCE microcode extracted from UGW 7.1.1 switch api * diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index a24d8e61fbe7..dd60d0837fc6 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -303,7 +303,7 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset, { \ .name = #width, \ .val_bits = (width), \ - .reg_stride = (width) / 8, \ + .reg_stride = 1, \ .reg_bits = (regbits) + (regalign), \ .pad_bits = (regpad), \ .max_register = BIT(regbits) - 1, \ diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 16f15c93a102..684aa51684db 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -936,6 +936,9 @@ qca8k_port_enable(struct dsa_switch *ds, int port, { struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + if (!dsa_is_user_port(ds, port)) + return 0; + qca8k_port_set_status(priv, port, 1); priv->port_sts[port].enabled = 1; diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig index 55424f39cb0d..f40b248f0b23 100644 --- a/drivers/net/dsa/sja1105/Kconfig +++ b/drivers/net/dsa/sja1105/Kconfig @@ -27,6 +27,7 @@ config NET_DSA_SJA1105_PTP config NET_DSA_SJA1105_TAS bool "Support for the Time-Aware Scheduler on NXP SJA1105" depends on NET_DSA_SJA1105 + depends on NET_SCH_TAPRIO help This enables support for the TTEthernet-based egress scheduling engine in the SJA1105 DSA driver, which is controlled using a diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 1e2de9d062bf..e8e9c166185d 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -140,17 +140,6 @@ source "drivers/net/ethernet/neterion/Kconfig" source "drivers/net/ethernet/netronome/Kconfig" source "drivers/net/ethernet/ni/Kconfig" source "drivers/net/ethernet/8390/Kconfig" - -config NET_NETX - tristate "NetX Ethernet support" - select MII - depends on ARCH_NETX - ---help--- - This is support for the Hilscher netX builtin Ethernet ports - - To compile this driver as a module, choose M here. The module - will be called netx-eth. - source "drivers/net/ethernet/nvidia/Kconfig" source "drivers/net/ethernet/nxp/Kconfig" source "drivers/net/ethernet/oki-semi/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 77f9838a76c9..05abebc17804 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -64,7 +64,6 @@ obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/ obj-$(CONFIG_NET_VENDOR_NETERION) += neterion/ obj-$(CONFIG_NET_VENDOR_NETRONOME) += netronome/ obj-$(CONFIG_NET_VENDOR_NI) += ni/ -obj-$(CONFIG_NET_NETX) += netx-eth.o obj-$(CONFIG_NET_VENDOR_NVIDIA) += nvidia/ obj-$(CONFIG_LPC_ENET) += nxp/ obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/ diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig index a5e2bcbf2722..264a482ec31d 100644 --- a/drivers/net/ethernet/allwinner/Kconfig +++ b/drivers/net/ethernet/allwinner/Kconfig @@ -21,17 +21,17 @@ config NET_VENDOR_ALLWINNER if NET_VENDOR_ALLWINNER config SUN4I_EMAC - tristate "Allwinner A10 EMAC support" + tristate "Allwinner A10 EMAC support" depends on ARCH_SUNXI depends on OF select CRC32 select MII select PHYLIB select MDIO_SUN4I - ---help--- - Support for Allwinner A10 EMAC ethernet driver. + ---help--- + Support for Allwinner A10 EMAC ethernet driver. - To compile this driver as a module, choose M here. The module - will be called sun4i-emac. + To compile this driver as a module, choose M here. The module + will be called sun4i-emac. endif # NET_VENDOR_ALLWINNER diff --git a/drivers/net/ethernet/amazon/Kconfig b/drivers/net/ethernet/amazon/Kconfig index 69ca99d8ac26..cca72a75f551 100644 --- a/drivers/net/ethernet/amazon/Kconfig +++ b/drivers/net/ethernet/amazon/Kconfig @@ -19,6 +19,7 @@ if NET_VENDOR_AMAZON config ENA_ETHERNET tristate "Elastic Network Adapter (ENA) support" depends on PCI_MSI && !CPU_BIG_ENDIAN + select DIMLIB ---help--- This driver supports Elastic Network Adapter (ENA)" diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.c b/drivers/net/ethernet/amazon/ena/ena_eth_com.c index 38046bf0ff44..2845ac277724 100644 --- a/ |