diff options
Diffstat (limited to 'drivers')
107 files changed, 652 insertions, 661 deletions
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index f7de02a6f497..e1ca86dfdd66 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -115,7 +115,6 @@ struct acpi_processor_errata errata __read_mostly; static int acpi_processor_errata_piix4(struct pci_dev *dev) { - u8 rev = 0; u8 value1 = 0; u8 value2 = 0; @@ -127,9 +126,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev) * Note that 'dev' references the PIIX4 ACPI Controller. */ - pci_read_config_byte(dev, PCI_REVISION_ID, &rev); - - switch (rev) { + switch (dev->revision) { case 0: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n")); break; @@ -147,7 +144,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev) break; } - switch (rev) { + switch (dev->revision) { case 0: /* PIIX4 A-step */ case 1: /* PIIX4 B-step */ diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 21a7ca4936b4..d9fa329fd157 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -928,20 +928,18 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) { struct pci_dev *pdev = NULL; u16 cfg; - u8 rev; int no_piix_dma = 0; while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) { /* Look for 450NX PXB. Check for problem configurations A PCI quirk checks bit 6 already */ - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); pci_read_config_word(pdev, 0x41, &cfg); /* Only on the original revision: IDE DMA can hang */ - if (rev == 0x00) + if (pdev->revision == 0x00) no_piix_dma = 1; /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if (cfg & (1<<14) && rev < 5) + else if (cfg & (1<<14) && pdev->revision < 5) no_piix_dma = 2; } if (no_piix_dma) diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 30c4276ec882..010436795d20 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -455,23 +455,21 @@ static struct ata_port_operations ali_c5_port_ops = { static void ali_init_chipset(struct pci_dev *pdev) { - u8 rev, tmp; + u8 tmp; struct pci_dev *north, *isa_bridge; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - /* * The chipset revision selects the driver operations and * mode data. */ - if (rev >= 0x20 && rev < 0xC2) { + if (pdev->revision >= 0x20 && pdev->revision < 0xC2) { /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */ pci_read_config_byte(pdev, 0x4B, &tmp); /* Clear CD-ROM DMA write bit */ tmp &= 0x7F; pci_write_config_byte(pdev, 0x4B, tmp); - } else if (rev >= 0xC2) { + } else if (pdev->revision >= 0xC2) { /* Enable cable detection logic */ pci_read_config_byte(pdev, 0x4B, &tmp); pci_write_config_byte(pdev, 0x4B, tmp | 0x08); @@ -483,21 +481,21 @@ static void ali_init_chipset(struct pci_dev *pdev) /* Configure the ALi bridge logic. For non ALi rely on BIOS. Set the south bridge enable bit */ pci_read_config_byte(isa_bridge, 0x79, &tmp); - if (rev == 0xC2) + if (pdev->revision == 0xC2) pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04); - else if (rev > 0xC2 && rev < 0xC5) + else if (pdev->revision > 0xC2 && pdev->revision < 0xC5) pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02); } - if (rev >= 0x20) { + if (pdev->revision >= 0x20) { /* * CD_ROM DMA on (0x53 bit 0). Enable this even if we want * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control * via 0x54/55. */ pci_read_config_byte(pdev, 0x53, &tmp); - if (rev <= 0x20) + if (pdev->revision <= 0x20) tmp &= ~0x02; - if (rev >= 0xc7) + if (pdev->revision >= 0xc7) tmp |= 0x03; else tmp |= 0x01; /* CD_ROM enable for DMA */ @@ -579,25 +577,23 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; const struct ata_port_info *ppi[] = { NULL, NULL }; - u8 rev, tmp; + u8 tmp; struct pci_dev *isa_bridge; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - /* * The chipset revision selects the driver operations and * mode data. */ - if (rev < 0x20) { + if (pdev->revision < 0x20) { ppi[0] = &info_early; - } else if (rev < 0xC2) { + } else if (pdev->revision < 0xC2) { ppi[0] = &info_20; - } else if (rev == 0xC2) { + } else if (pdev->revision == 0xC2) { ppi[0] = &info_c2; - } else if (rev == 0xC3) { + } else if (pdev->revision == 0xC3) { ppi[0] = &info_c3; - } else if (rev == 0xC4) { + } else if (pdev->revision == 0xC4) { ppi[0] = &info_c4; } else ppi[0] = &info_c5; @@ -605,7 +601,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ali_init_chipset(pdev); isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); - if (isa_bridge && rev >= 0x20 && rev < 0xC2) { + if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) { /* Are we paired with a UDMA capable chip */ pci_read_config_byte(isa_bridge, 0x5E, &tmp); if ((tmp & 0x1E) == 0x12) diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index b9c44c575ce3..b09facad63e1 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -623,17 +623,15 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) const struct ata_port_info *ppi[] = { NULL, NULL }; static int printed_version; int type = id->driver_data; - u8 rev; u8 fifo; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); pci_read_config_byte(pdev, 0x41, &fifo); /* Check for AMD7409 without swdma errata and if found adjust type */ - if (type == 1 && rev > 0x7) + if (type == 1 && pdev->revision > 0x7) type = 2; /* Check for AMD7411 */ diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 3fca5898642b..68f150a1e2f4 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -266,7 +266,7 @@ static int cs5530_init_chip(void) } pci_set_master(cs5530_0); - pci_set_mwi(cs5530_0); + pci_try_set_mwi(cs5530_0); /* * Set PCI CacheLineSize to 16-bytes: diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index b67bbf6516ba..430673be1df7 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -587,8 +587,7 @@ static int it821x_port_start(struct ata_port *ap) itdev->want[1][1] = ATA_ANY; itdev->last_device = -1; - pci_read_config_byte(pdev, PCI_REVISION_ID, &conf); - if (conf == 0x10) { + if (pdev->revision == 0x11) { itdev->timing10 = 1; /* Need to disable ATAPI DMA for this case */ if (!itdev->smart) diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 0231aba51ca4..89691541fe59 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -410,11 +410,8 @@ static int serverworks_fixup_osb4(struct pci_dev *pdev) static int serverworks_fixup_csb(struct pci_dev *pdev) { - u8 rev; u8 btr; - pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); - /* Third Channel Test */ if (!(PCI_FUNC(pdev->devfn) & 1)) { struct pci_dev * findev = NULL; @@ -456,7 +453,7 @@ static int serverworks_fixup_csb(struct pci_dev *pdev) if (!(PCI_FUNC(pdev->devfn) & 1)) btr |= 0x2; else - btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; + btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; pci_write_config_byte(pdev, 0x5A, btr); return btr; diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 657b1ee2f5c1..9a829a7cbc60 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -931,9 +931,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (host != NULL) { chipset = sets; /* Match found */ if (sets->device == 0x630) { /* SIS630 */ - u8 host_rev; - pci_read_config_byte(host, PCI_REVISION_ID, &host_rev); - if (host_rev >= 0x30) /* 630 ET */ + if (host->revision >= 0x30) /* 630 ET */ chipset = &sis100_early; } break; @@ -977,7 +975,6 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) u16 trueid; u8 prefctl; u8 idecfg; - u8 sbrev; |