diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/block/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/char/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/char/virtio_console.c | 2 | ||||
| -rw-r--r-- | drivers/lguest/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/lguest/Makefile | 26 | ||||
| -rw-r--r-- | drivers/lguest/README | 47 | ||||
| -rw-r--r-- | drivers/lguest/core.c | 398 | ||||
| -rw-r--r-- | drivers/lguest/hypercalls.c | 304 | ||||
| -rw-r--r-- | drivers/lguest/interrupts_and_traps.c | 706 | ||||
| -rw-r--r-- | drivers/lguest/lg.h | 258 | ||||
| -rw-r--r-- | drivers/lguest/lguest_user.c | 446 | ||||
| -rw-r--r-- | drivers/lguest/page_tables.c | 1239 | ||||
| -rw-r--r-- | drivers/lguest/segments.c | 228 | ||||
| -rw-r--r-- | drivers/lguest/x86/core.c | 724 | ||||
| -rw-r--r-- | drivers/lguest/x86/switcher_32.S | 388 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/tty/hvc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/virtio/Kconfig | 4 |
19 files changed, 7 insertions, 4785 deletions
diff --git a/drivers/Makefile b/drivers/Makefile index dfdcda00bfe3..d90fdc413648 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -125,7 +125,6 @@ obj-$(CONFIG_ACCESSIBILITY) += accessibility/ obj-$(CONFIG_ISDN) += isdn/ obj-$(CONFIG_EDAC) += edac/ obj-$(CONFIG_EISA) += eisa/ -obj-y += lguest/ obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_CPU_IDLE) += cpuidle/ obj-y += mmc/ diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 8ddc98279c8f..80aaf3420e12 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -470,7 +470,7 @@ config VIRTIO_BLK depends on VIRTIO ---help--- This is the virtual block driver for virtio. It can be used with - lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. + QEMU based VMMs (like KVM or Xen). Say Y or M. config VIRTIO_BLK_SCSI bool "SCSI passthrough request for the Virtio block driver" diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index ccd239ab879f..623714344600 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -161,7 +161,7 @@ config VIRTIO_CONSOLE depends on VIRTIO && TTY select HVC_DRIVER help - Virtio console for use with lguest and other hypervisors. + Virtio console for use with hypervisors. Also serves as a general-purpose serial device for data transfer between the guest and host. Character devices at diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index ad843eb02ae7..4d229dde6522 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1130,7 +1130,7 @@ static const struct file_operations port_fops = { * We turn the characters into a scatter-gather list, add it to the * output queue and then kick the Host. Then we sit here waiting for * it to finish: inefficient in theory, but in practice - * implementations will do it immediately (lguest's Launcher does). + * implementations will do it immediately. */ static int put_chars(u32 vtermno, const char *buf, int count) { diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig deleted file mode 100644 index 169172d2ba05..000000000000 --- a/drivers/lguest/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -config LGUEST - tristate "Linux hypervisor example code" - depends on X86_32 && EVENTFD && TTY && PCI_DIRECT - select HVC_DRIVER - ---help--- - This is a very simple module which allows you to run - multiple instances of the same Linux kernel, using the - "lguest" command found in the tools/lguest directory. - - Note that "lguest" is pronounced to rhyme with "fell quest", - not "rustyvisor". See tools/lguest/lguest.txt. - - If unsure, say N. If curious, say M. If masochistic, say Y. diff --git a/drivers/lguest/Makefile b/drivers/lguest/Makefile deleted file mode 100644 index 16f52ee73994..000000000000 --- a/drivers/lguest/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# Host requires the other files, which can be a module. -obj-$(CONFIG_LGUEST) += lg.o -lg-y = core.o hypercalls.o page_tables.o interrupts_and_traps.o \ - segments.o lguest_user.o - -lg-$(CONFIG_X86_32) += x86/switcher_32.o x86/core.o - -Preparation Preparation!: PREFIX=P -Guest: PREFIX=G -Drivers: PREFIX=D -Launcher: PREFIX=L -Host: PREFIX=H -Switcher: PREFIX=S -Mastery: PREFIX=M -Beer: - @for f in Preparation Guest Drivers Launcher Host Switcher Mastery; do echo "{==- $$f -==}"; make -s $$f; done; echo "{==-==}" -Preparation Preparation! Guest Drivers Launcher Host Switcher Mastery: - @sh ../../tools/lguest/extract $(PREFIX) `find ../../* -name '*.[chS]' -wholename '*lguest*'` -Puppy: - @clear - @printf " __ \n (___()'\`;\n /, /\`\n \\\\\\\"--\\\\\\ \n" - @sleep 2; clear; printf "\n\n Sit!\n\n"; sleep 1; clear - @printf " __ \n ()'\`; \n /\\|\` \n / | \n(/_)_|_ \n" - @sleep 2; clear; printf "\n\n Stand!\n\n"; sleep 1; clear - @printf " __ \n ()'\`; \n /\\|\` \n /._.= \n /| / \n(_\_)_ \n" - @sleep 2; clear; printf "\n\n Good puppy!\n\n"; sleep 1; clear diff --git a/drivers/lguest/README b/drivers/lguest/README deleted file mode 100644 index b7db39a64c66..000000000000 --- a/drivers/lguest/README +++ /dev/null @@ -1,47 +0,0 @@ -Welcome, friend reader, to lguest. - -Lguest is an adventure, with you, the reader, as Hero. I can't think of many -5000-line projects which offer both such capability and glimpses of future -potential; it is an exciting time to be delving into the source! - -But be warned; this is an arduous journey of several hours or more! And as we -know, all true Heroes are driven by a Noble Goal. Thus I offer a Beer (or -equivalent) to anyone I meet who has completed this documentation. - -So get comfortable and keep your wits about you (both quick and humorous). -Along your way to the Noble Goal, you will also gain masterly insight into -lguest, and hypervisors and x86 virtualization in general. - -Our Quest is in seven parts: (best read with C highlighting turned on) - -I) Preparation - - In which our potential hero is flown quickly over the landscape for a - taste of its scope. Suitable for the armchair coders and other such - persons of faint constitution. - -II) Guest - - Where we encounter the first tantalising wisps of code, and come to - understand the details of the life of a Guest kernel. - -III) Drivers - - Whereby the Guest finds its voice and become useful, and our - understanding of the Guest is completed. - -IV) Launcher - - Where we trace back to the creation of the Guest, and thus begin our - understanding of the Host. - -V) Host - - Where we master the Host code, through a long and tortuous journey. - Indeed, it is here that our hero is tested in the Bit of Despair. - -VI) Switcher - - Where our understanding of the intertwined nature of Guests and Hosts - is completed. - -VII) Mastery - - Where our fully fledged hero grapples with the Great Question: - "What next?" - -make Preparation! -Rusty Russell. diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c deleted file mode 100644 index 395ed1961dbf..000000000000 --- a/drivers/lguest/core.c +++ /dev/null @@ -1,398 +0,0 @@ -/*P:400 - * This contains run_guest() which actually calls into the Host<->Guest - * Switcher and analyzes the return, such as determining if the Guest wants the - * Host to do something. This file also contains useful helper routines. -:*/ -#include <linux/module.h> -#include <linux/stringify.h> -#include <linux/stddef.h> -#include <linux/io.h> -#include <linux/mm.h> -#include <linux/sched/signal.h> -#include <linux/vmalloc.h> -#include <linux/cpu.h> -#include <linux/freezer.h> -#include <linux/highmem.h> -#include <linux/slab.h> -#include <asm/paravirt.h> -#include <asm/pgtable.h> -#include <linux/uaccess.h> -#include <asm/poll.h> -#include <asm/asm-offsets.h> -#include "lg.h" - -unsigned long switcher_addr; -struct page **lg_switcher_pages; -static struct vm_struct *switcher_text_vma; -static struct vm_struct *switcher_stacks_vma; - -/* This One Big lock protects all inter-guest data structures. */ -DEFINE_MUTEX(lguest_lock); - -/*H:010 - * We need to set up the Switcher at a high virtual address. Remember the - * Switcher is a few hundred bytes of assembler code which actually changes the - * CPU to run the Guest, and then changes back to the Host when a trap or - * interrupt happens. - * - * The Switcher code must be at the same virtual address in the Guest as the - * Host since it will be running as the switchover occurs. - * - * Trying to map memory at a particular address is an unusual thing to do, so - * it's not a simple one-liner. - */ -static __init int map_switcher(void) -{ - int i, err; - - /* - * Map the Switcher in to high memory. - * - * It turns out that if we choose the address 0xFFC00000 (4MB under the - * top virtual address), it makes setting up the page tables really - * easy. - */ - - /* We assume Switcher text fits into a single page. */ - if (end_switcher_text - start_switcher_text > PAGE_SIZE) { - printk(KERN_ERR "lguest: switcher text too large (%zu)\n", - end_switcher_text - start_switcher_text); - return -EINVAL; - } - - /* - * We allocate an array of struct page pointers. map_vm_area() wants - * this, rather than just an array of pages. - */ - lg_switcher_pages = kmalloc(sizeof(lg_switcher_pages[0]) - * TOTAL_SWITCHER_PAGES, - GFP_KERNEL); - if (!lg_switcher_pages) { - err = -ENOMEM; - goto out; - } - - /* - * Now we actually allocate the pages. The Guest will see these pages, - * so we make sure they're zeroed. - */ - for (i = 0; i < TOTAL_SWITCHER_PAGES; i++) { - lg_switcher_pages[i] = alloc_page(GFP_KERNEL|__GFP_ZERO); - if (!lg_switcher_pages[i]) { - err = -ENOMEM; - goto free_some_pages; - } - } - - /* - * Copy in the compiled-in Switcher code (from x86/switcher_32.S). - * It goes in the first page, which we map in momentarily. - */ - memcpy(kmap(lg_switcher_pages[0]), start_switcher_text, - end_switcher_text - start_switcher_text); - kunmap(lg_switcher_pages[0]); - - /* - * We place the Switcher underneath the fixmap area, which is the - * highest virtual address we can get. This is important, since we - * tell the Guest it can't access this memory, so we want its ceiling - * as high as possible. - */ - switcher_addr = FIXADDR_START - TOTAL_SWITCHER_PAGES*PAGE_SIZE; - - /* - * Now we reserve the "virtual memory area"s we want. We might - * not get them in theory, but in practice it's worked so far. - * - * We want the switcher text to be read-only and executable, and - * the stacks to be read-write and non-executable. - */ - switcher_text_vma = __get_vm_area(PAGE_SIZE, VM_ALLOC|VM_NO_GUARD, - switcher_addr, - switcher_addr + PAGE_SIZE); - - if (!switcher_text_vma) { - err = -ENOMEM; - printk("lguest: could not map switcher pages high\n"); - goto free_pages; - } - - switcher_stacks_vma = __get_vm_area(SWITCHER_STACK_PAGES * PAGE_SIZE, - VM_ALLOC|VM_NO_GUARD, - switcher_addr + PAGE_SIZE, - switcher_addr + TOTAL_SWITCHER_PAGES * PAGE_SIZE); - if (!switcher_stacks_vma) { - err = -ENOMEM; - printk("lguest: could not map switcher pages high\n"); - goto free_text_vma; - } - - /* - * This code actually sets up the pages we've allocated to appear at - * switcher_addr. map_vm_area() takes the vma we allocated above, the - * kind of pages we're mapping (kernel text pages and kernel writable - * pages respectively), and a pointer to our array of struct pages. - */ - err = map_vm_area(switcher_text_vma, PAGE_KERNEL_RX, lg_switcher_pages); - if (err) { - printk("lguest: text map_vm_area failed: %i\n", err); - goto free_vmas; - } - - err = map_vm_area(switcher_stacks_vma, PAGE_KERNEL, - lg_switcher_pages + SWITCHER_TEXT_PAGES); - if (err) { - printk("lguest: stacks map_vm_area failed: %i\n", err); - goto free_vmas; - } - - /* - * Now the Switcher is mapped at the right address, we can't fail! - */ - printk(KERN_INFO "lguest: mapped switcher at %p\n", - switcher_text_vma->addr); - /* And we succeeded... */ - return 0; - -free_vmas: - /* Undoes map_vm_area and __get_vm_area */ - vunmap(switcher_stacks_vma->addr); -free_text_vma: - vunmap(switcher_text_vma->addr); -free_pages: - i = TOTAL_SWITCHER_PAGES; -free_some_pages: - for (--i; i >= 0; i--) - __free_pages(lg_switcher_pages[i], 0); - kfree(lg_switcher_pages); -out: - return err; -} -/*:*/ - -/* Cleaning up the mapping when the module is unloaded is almost... too easy. */ -static void unmap_switcher(void) -{ - unsigned int i; - - /* vunmap() undoes *both* map_vm_area() and __get_vm_area(). */ - vunmap(switcher_text_vma->addr); - vunmap(switcher_stacks_vma->addr); - /* Now we just need to free the pages we copied the switcher into */ - for (i = 0; i < TOTAL_SWITCHER_PAGES; i++) - __free_pages(lg_switcher_pages[i], 0); - kfree(lg_switcher_pages); -} - -/*H:032 - * Dealing With Guest Memory. - * - * Before we go too much further into the Host, we need to grok the routines - * we use to deal with Guest memory. - * - * When the Guest gives us (what it thinks is) a physical address, we can use - * the normal copy_from_user() & copy_to_user() on the corresponding place in - * the memory region allocated by the Launcher. - * - * But we can't trust the Guest: it might be trying to access the Launcher - * code. We have to check that the range is below the pfn_limit the Launcher - * gave us. We have to make sure that addr + len doesn't give us a false - * positive by overflowing, too. - */ -bool lguest_address_ok(const struct lguest *lg, - unsigned long addr, unsigned long len) -{ - return addr+len <= lg->pfn_limit * PAGE_SIZE && (addr+len >= addr); -} - -/* - * This routine copies memory from the Guest. Here we can see how useful the - * kill_lguest() routine we met in the Launcher can be: we return a random - * value (all zeroes) instead of needing to return an error. - */ -void __lgread(struct lg_cpu *cpu, void *b, unsigned long addr, unsigned bytes) -{ - if (!lguest_address_ok(cpu->lg, addr, bytes) - || copy_from_user(b, cpu->lg->mem_base + addr, bytes) != 0) { - /* copy_from_user should do this, but as we rely on it... */ - memset(b, 0, bytes); - kill_guest(cpu, "bad read address %#lx len %u", addr, bytes); - } -} - -/* This is the write (copy into Guest) version. */ -void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b, - unsigned bytes) -{ - if (!lguest_address_ok(cpu->lg, addr, bytes) - || copy_to_user(cpu->lg->mem_base + addr, b, bytes) != 0) - kill_guest(cpu, "bad write address %#lx len %u", addr, bytes); -} -/*:*/ - -/*H:030 - * Let's jump straight to the the main loop which runs the Guest. - * Remember, this is called by the Launcher reading /dev/lguest, and we keep - * going around and around until something interesting happens. - */ -int run_guest(struct lg_cpu *cpu, unsigned long __user *user) -{ - /* If the launcher asked for a register with LHREQ_GETREG */ - if (cpu->reg_read) { - if (put_user(*cpu->reg_read, user)) - return -EFAULT; - cpu->reg_read = NULL; - return sizeof(*cpu->reg_read); - } - - /* We stop running once the Guest is dead. */ - while (!cpu->lg->dead) { - unsigned int irq; - bool more; - - /* First we run any hypercalls the Guest wants done. */ - if (cpu->hcall) - do_hypercalls(cpu); - - /* Do we have to tell the Launcher about a trap? */ - if (cpu->pending.trap) { - if (copy_to_user(user, &cpu->pending, - sizeof(cpu->pending))) - return -EFAULT; - return sizeof(cpu->pending); - } - - /* - * All long-lived kernel loops need to check with this horrible - * thing called the freezer. If the Host is trying to suspend, - * it stops us. - */ - try_to_freeze(); - - /* Check for signals */ - if (signal_pending(current)) - return -ERESTARTSYS; - - /* - * Check if there are any interrupts which can be delivered now: - * if so, this sets up the hander to be executed when we next - * run the Guest. - */ - irq = interrupt_pending(cpu, &more); - if (irq < LGUEST_IRQS) - try_deliver_interrupt(cpu, irq, more); - - /* - * Just make absolutely sure the Guest is still alive. One of - * those hypercalls could have been fatal, for example. - */ - if (cpu->lg->dead) - break; - - /* - * If the Guest asked to be stopped, we sleep. The Guest's - * clock timer will wake us. - */ - if (cpu->halted) { - set_current_state(TASK_INTERRUPTIBLE); - /* - * Just before we sleep, make sure no interrupt snuck in - * which we should be doing. - */ - if (interrupt_pending(cpu, &more) < LGUEST_IRQS) - set_current_state(TASK_RUNNING); - else - schedule(); - continue; - } - - /* - * OK, now we're ready to jump into the Guest. First we put up - * the "Do Not Disturb" sign: - */ - local_irq_disable(); - - /* Actually run the Guest until something happens. */ - lguest_arch_run_guest(cpu); - - /* Now we're ready to be interrupted or moved to other CPUs */ - local_irq_enable(); - - /* Now we deal with whatever happened to the Guest. */ - lguest_arch_handle_trap(cpu); - } - - /* Special case: Guest is 'dead' but wants a reboot. */ - if (cpu->lg->dead == ERR_PTR(-ERESTART)) - return -ERESTART; - - /* The Guest is dead => "No such file or directory" */ - return -ENOENT; -} - -/*H:000 - * Welcome to the Host! - * - * By this point your brain has been tickled by the Guest code and numbed by - * the Launcher code; prepare for it to be stretched by the Host code. This is - * the heart. Let's begin at the initialization routine for the Host's lg - * module. - */ -static int __init init(void) -{ - int err; - - /* Lguest can't run under Xen, VMI or itself. It does Tricky Stuff. */ - if (get_kernel_rpl() != 0) { - printk("lguest is afraid of being a guest\n"); - return -EPERM; - } - - /* First we put the Switcher up in very high virtual memory. */ - err = map_switcher(); - if (err) - goto out; - - /* We might need to reserve an interrupt vector. */ - err = init_interrupts(); - if (err) - goto unmap; - - /* /dev/lguest needs to be registered. */ - err = lguest_device_init(); - if (err) - goto free_interrupts; - - /* Finally we do some architecture-specific setup. */ - lguest_arch_host_init(); - - /* All good! */ - return 0; - -free_interrupts: - free_interrupts(); -unmap: - unmap_switcher(); -out: - return err; -} - -/* Cleaning up is just the same code, backwards. With a little French. */ -static void __exit fini(void) -{ - lguest_device_remove(); - free_interrupts(); - unmap_switcher(); - - lguest_arch_host_fini(); -} -/*:*/ - -/* - * The Host side of lguest can be a module. This is a nice way for people to - * play with it. - */ -module_init(init); -module_exit(fini); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Rusty Russell <rusty@rustcorp.com.au>"); diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c deleted file mode 100644 index 601f81c04873..000000000000 --- a/drivers/lguest/hypercalls.c +++ /dev/null @@ -1,304 +0,0 @@ -/*P:500 - * Just as userspace programs request kernel operations through a system - * call, the Guest requests Host operations through a "hypercall". You might - * notice this nomenclature doesn't really follow any logic, but the name has - * been around for long enough that we're stuck with it. As you'd expect, this - * code is basically a one big switch statement. -:*/ - -/* Copyright (C) 2006 Rusty Russell IBM Corporation - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ -#include <linux/uaccess.h> -#include <linux/syscalls.h> -#include <linux/mm.h> -#include <linux/ktime.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include "lg.h" - -/*H:120 - * This is the core hypercall routine: where the Guest gets what it wants. - * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both. - */ -static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args) -{ - switch (args->arg0) { - case LHCALL_FLUSH_ASYNC: - /* - * This call does nothing, except by breaking out of the Guest - * it makes us process all the asynchronous hypercalls. - */ - break; - case LHCALL_SEND_INTERRUPTS: - /* - * This call does nothing too, but by breaking out of the Guest - * it makes us process any pending interrupts. - */ - break; - case LHCALL_LGUEST_INIT: - /* - * You can't get here unless you're already initialized. Don't - * do that. - */ - kill_guest(cpu, "already have lguest_data"); - break; - case LHCALL_SHUTDOWN: { - char msg[128]; - /* - * Shutdown is such a trivial hypercall that we do it in five - * lines right here. - * - * If the lgread fails, it will call kill_guest() itself; the - * kill_guest() with the message will be ignored. - */ - __lgread(cpu, msg, args->arg1, sizeof(msg)); - msg[sizeof(msg)-1] = '\0'; - kill_guest(cpu, "CRASH: %s", msg); - if (args->arg2 == LGUEST_SHUTDOWN_RESTART) - cpu->lg->dead = ERR_PTR(-ERESTART); - break; - } - case LHCALL_FLUSH_TLB: - /* FLUSH_TLB comes in two flavors, depending on the argument: */ - if (args->arg1) - guest_pagetable_clear_all(cpu); - else - guest_pagetable_flush_user(cpu); - break; - - /* - * All these calls simply pass the arguments through to the right - * routines. - */ - case LHCALL_NEW_PGTABLE: - guest_new_pagetable(cpu, args->arg1); - break; - case LHCALL_SET_STACK: - guest_set_stack(cpu, args->arg1, args->arg2, args->arg3); - break; - case LHCALL_SET_PTE: -#ifdef CONFIG_X86_PAE - guest_set_pte(cpu, args->arg1, args->arg2, - __pte(args->arg3 | (u64)args->arg4 << 32)); -#else - guest_set_pte(cpu, args->arg1, args->arg2, __pte(args->arg3)); -#endif - break; - case LHCALL_SET_PGD: - guest_set_pgd(cpu->lg, args->arg1, args->arg2); - break; -#ifdef CONFIG_X86_PAE - case LHCALL_SET_PMD: - guest_set_pmd(cpu->lg, args->arg1, args->arg2); - break; -#endif - case LHCALL_SET_CLOCKEVENT: - guest_set_clockevent(cpu, args->arg1); - break; - case LHCALL_HALT: - /* Similarly, this sets the halted flag for run_guest(). */ - cpu->halted = 1; - break; - default: - /* It should be an architecture-specific hypercall. */ - if (lguest_arch_do_hcall(cpu, args)) - kill_guest(cpu, "Bad hypercall %li\n", args->arg0); - } -} - -/*H:124 - * Asynchronous hypercalls are easy: we just look in the array in the - * Guest's "struct lguest_data" to see if any new ones are marked "ready". - * - * We are careful to do these in order: obviously we respect the order the - * Guest put them in the ring, but we also promise the Guest that they will - * happen before any normal hypercall (which is why we check this before - * checking for a normal hcall). - */ -static void do_async_hcalls(struct lg_cpu *cpu) -{ - unsigned int i; - u8 st[LHCALL_RING_SIZE]; - - /* For simplicity, we copy the entire call status array in at once. */ - if (copy_from_user(&st, &cpu->lg->lguest_data->hcall_status, sizeof(st))) - return; - - /* We process "struct lguest_data"s hcalls[] ring once. */ - for (i = 0; i < ARRAY_SIZE(st); i++) { - struct hcall_args args; - /* - * We remember where we were up to from last time. This makes - * sure that the hypercalls are done in the order the Guest - * places them in the ring. - */ - unsigned int n = cpu->next_hcall; - - /* 0xFF means there's no call here (yet). */ - if (st[n] == 0xFF) - break; - - /* - * OK, we have hypercall. Increment the "next_hcall" cursor, - * and wrap back to 0 if we reach the end. - */ - if (++cpu->next_hcall == LHCALL_RING_SIZE) - cpu->next_hcall = 0; - - /* - * Copy the hypercall arguments into a local copy of the - * hcall_args struct. - */ - if (copy_from_user(&args, &cpu->lg->lguest_data->hcalls[n], - sizeof(struct hcall_args))) { - kill_guest(cpu, "Fetching async hypercalls"); - break; - } - - /* Do the hypercall, same as a normal one. */ - do_hcall(cpu, &args); - - /* Mark the hypercall done. */ - if (put_user(0xFF, &cpu->lg->lguest_data->hcall_status[n])) { - kill_guest(cpu, "Writing result for async hypercall"); - break; - } - - /* - * Stop doing hypercalls if they want to notify the Launcher: - * it needs to service this first. - */ - if (cpu->pending.trap) - break; - } -} - -/* - * Last of all, we look at what happens first of all. The very first time the - * Guest makes a hypercall, we end up here to set things up: - */ -static void initialize(struct lg_cpu *cpu) -{ - /* - * You can't do anything until you're initialized. The Guest knows the - * rules, so we're unforgiving here. - */ - if (cpu->hcall->arg0 != LHCALL_LGUEST_INIT) { - kill_guest(cpu, "hypercall %li before INIT", cpu->hcall->arg0); - return; - } - - if (lguest_arch_init_hypercalls(cpu)) - kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data); - - /* - * The Guest tells us where we're not to deliver interrupts by putting - * the instruction address into "struct lguest_data". - */ - if (get_user(cpu->lg->noirq_iret, &cpu->lg->lguest_data->noirq_iret)) - kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data); - - /* - * We write the current time into the Guest's data page once so it can - * set its clock. - */ - write_timestamp(cpu); - - /* page_tables.c will also do some setup. */ - page_table_guest_data_init(cpu); - - /* - * This is the one case where the above accesses might have been the - * first write to a Guest page. This may have caused a copy-on-write - * fault, but the old page might be (read-only) in the Guest - * pagetable. - */ - guest_pagetable_clear_all(cpu); -} -/*:*/ - -/*M:013 - * If a Guest reads from a page (so creates a mapping) that it has never - * written to, and then the Launcher writes to it (ie. the output of a virtual - * device), the Guest will still see the old page. In practice, this never - * happens: why would the Guest read a page which it has never written to? But - * a similar scenario might one day bite us, so it's worth mentioning. - * - * Note that if we used a shared anonymous mapping in the Launcher instead of - * mapping /dev/zero private, we wouldn't worry about cop-on-write. And we - * need that to switch the Launcher to processes (away from threads) anyway. -:*/ - -/*H:100 - * Hypercalls - * - * Remember from the Guest, hypercalls come in two flavors: normal and - * asynchronous. This file handles both of types. - */ -void do_hypercalls(struct lg_cpu *cpu) -{ - /* Not initialized yet? This hypercall must do it. */ - if (unlikely(!cpu->lg->lguest_data)) { - /* Set up the "struct lguest_data" */ - initialize(cpu); - /* Hcall is done. */ - cpu->hcall = NULL; - return; - } - - /* - * The Guest has initialized. - * - * Look in the hypercall ring for the async hypercalls: - */ - do_async_hcalls(cpu); - - /* - * If we stopped reading the hypercall ring because the Guest did a - * NOTIFY to the Launcher, we want to return now. Otherwise we do - * the hypercall. - */ - if (!cpu->pending.trap) { - do_hcall(cpu, cpu->hcall); - /* - * Tricky point: we reset the hcall pointer to mark the - * hypercall as "done". We use the hcall pointer rather than - * the trap number to indicate a hypercall is pending. - * Normally it doesn't matter: the Guest will run again and - * update the trap number before we come back here. - * - * However, if we are signalled or the Guest sends I/O to the - * Launcher, the run_guest() loop will exit without running the - * Guest. When it comes back it would try to re-run the - * hypercall. Finding that bug sucked. - */ - cpu->hcall = NULL; - } -} - -/* - * This routine supplies the Guest with time: it's used for wallclock time at - * initial boot and as a rough time source if the TSC isn't available. - */ -void write_timestamp(struct lg_cpu *cpu) -{ - struct timespec now; - ktime_get_real_ts(&now); - if (copy_to_user(&cpu->lg->lguest_data->time, - &now, sizeof(struct timespec))) - kill_guest(cpu, "Writing timestamp"); -} diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c deleted file mode 100644 index 67392b6ab845..000000000000 --- a/drivers/lguest/interrupts_and_traps.c +++ /dev/null @@ -1,706 +0,0 @@ -/*P:800 - * Interrupts (traps) are complicated enough to earn their own file. - * There are three classes of interrupts: - * - * 1) Real hardware interrupts which occur while we're running the Guest, - * 2) Interrupts for virtual devices attached to the Guest, and - * 3) Traps and faults from the Guest. - * - * Real hardware interrupts must be delivered to the Host, not the Guest. - * Virtual interrupts must be delivered to the Guest, but we make them look - * just like real hardware would deliver them. Traps from the Guest can be set - * up to go directly back into the Guest, but sometimes the Host wants to see - * them first, so we also have a way of "reflecting" them into the Guest as if - * they had been delivered to it directly. -:*/ -#include <linux/uaccess.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/sched.h> -#include "lg.h" - -/* Allow Guests to use a non-128 (ie. non-Linux) syscall trap. */ -static unsigned int syscall_vector = IA32_SYSCALL_VECTOR; -module_param(syscall_vector, uint, 0444); - -/* The address of the interrupt handler is split into two bits: */ -static unsigned long idt_address(u32 lo, u32 hi) -{ - return (lo & 0x0000FFFF) | (hi & 0xFFFF0000); -} - -/* - * The "type" of the interrupt handler is a 4 bit field: we only support a - * couple of types. - */ -static int idt_type(u32 lo, u32 hi) -{ - return (hi >> 8) & 0xF; -} - -/* An IDT entry can't be used unless the "present" bit is set. */ -static bool idt_present(u32 lo, u32 hi) -{ - return (hi & 0x8000); -} - -/* - * We need a helper to "push" a value onto the Guest's stack, since that's a - * big part of what delivering an interrupt does. - */ -static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val) -{ - /* Stack grows upwards: move stack then write value. */ - *gstack -= 4; - lgwrite(cpu, *gstack, u32, val); -} - -/*H:210 - * The push_guest_interrupt_stack() routine saves Guest state on the stack for - * an interrupt or trap. The mechanics of delivering traps and interrupts to - * the Guest are the same, except some traps have an "error code" which gets - * pushed onto the stack as well: the caller tells us if this is one. - * - * We set up the stack just like the CPU does for a real interrupt, so it's - * identical for the Guest (and the standard "iret" instruction will undo - * it). - */ -static void push_guest_interrupt_stack(struct lg_cpu *cpu, bool has_err) -{ - unsigned long gstack, origstack; |