diff options
Diffstat (limited to 'include/linux')
92 files changed, 1055 insertions, 386 deletions
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 6816be6c3f77..8b1038607831 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -14,6 +14,9 @@ #ifndef ASMARM_AMBA_H #define ASMARM_AMBA_H +#include <linux/device.h> +#include <linux/resource.h> + #define AMBA_NR_IRQS 2 struct amba_device { diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h index 29c0448265cf..ca16c3801a1e 100644 --- a/include/linux/amba/clcd.h +++ b/include/linux/amba/clcd.h @@ -21,22 +21,21 @@ #define CLCD_UBAS 0x00000010 #define CLCD_LBAS 0x00000014 -#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW) -#define CLCD_IENB 0x00000018 -#define CLCD_CNTL 0x0000001c -#else -/* - * Someone rearranged these two registers on the Versatile - * platform... - */ -#define CLCD_IENB 0x0000001c -#define CLCD_CNTL 0x00000018 -#endif - -#define CLCD_STAT 0x00000020 -#define CLCD_INTR 0x00000024 -#define CLCD_UCUR 0x00000028 -#define CLCD_LCUR 0x0000002C +#define CLCD_PL110_IENB 0x00000018 +#define CLCD_PL110_CNTL 0x0000001c +#define CLCD_PL110_STAT 0x00000020 +#define CLCD_PL110_INTR 0x00000024 +#define CLCD_PL110_UCUR 0x00000028 +#define CLCD_PL110_LCUR 0x0000002C + +#define CLCD_PL111_CNTL 0x00000018 +#define CLCD_PL111_IENB 0x0000001c +#define CLCD_PL111_RIS 0x00000020 +#define CLCD_PL111_MIS 0x00000024 +#define CLCD_PL111_ICR 0x00000028 +#define CLCD_PL111_UCUR 0x0000002c +#define CLCD_PL111_LCUR 0x00000030 + #define CLCD_PALL 0x00000200 #define CLCD_PALETTE 0x00000200 @@ -147,6 +146,8 @@ struct clcd_fb { struct clcd_board *board; void *board_data; void __iomem *regs; + u16 off_ienb; + u16 off_cntl; u32 clcd_cntl; u32 cmap[16]; }; diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h index b4fbd9862606..5ddd9ad4b19c 100644 --- a/include/linux/amba/pl061.h +++ b/include/linux/amba/pl061.h @@ -1,3 +1,5 @@ +#include <linux/types.h> + /* platform data for the PL061 GPIO driver */ struct pl061_platform_data { diff --git a/include/linux/ata.h b/include/linux/ata.h index b4c85e2adef5..700c5b9b3583 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -1025,8 +1025,8 @@ static inline int ata_ok(u8 status) static inline int lba_28_ok(u64 block, u32 n_block) { - /* check the ending block number */ - return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256); + /* check the ending block number: must be LESS THAN 0x0fffffff */ + return ((block + n_block) < ((1 << 28) - 1)) && (n_block <= 256); } static inline int lba_48_ok(u64 block, u32 n_block) diff --git a/include/linux/backlight.h b/include/linux/backlight.h index 8c4f884db6b4..4a3d52e545e1 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -36,18 +36,18 @@ struct backlight_device; struct fb_info; struct backlight_ops { - const unsigned int options; + unsigned int options; #define BL_CORE_SUSPENDRESUME (1 << 0) /* Notify the backlight driver some property has changed */ - int (* const update_status)(struct backlight_device *); + int (*update_status)(struct backlight_device *); /* Return the current backlight brightness (accounting for power, fb_blank etc.) */ - int (* const get_brightness)(struct backlight_device *); + int (*get_brightness)(struct backlight_device *); /* Check if given framebuffer device is the one bound to this backlight; return 0 if not, !=0 if it is. If NULL, backlight always matches the fb. */ - int (* const check_fb)(struct fb_info *); + int (*check_fb)(struct backlight_device *, struct fb_info *); }; /* This structure defines all the properties of a backlight */ @@ -103,7 +103,8 @@ static inline void backlight_update_status(struct backlight_device *bd) } extern struct backlight_device *backlight_device_register(const char *name, - struct device *dev, void *devdata, const struct backlight_ops *ops); + struct device *dev, void *devdata, const struct backlight_ops *ops, + const struct backlight_properties *props); extern void backlight_device_unregister(struct backlight_device *bd); extern void backlight_force_update(struct backlight_device *bd, enum backlight_update_reason reason); diff --git a/include/linux/bitops.h b/include/linux/bitops.h index b79389879238..b796eab5ca75 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -21,9 +21,6 @@ (bit) < (size); \ (bit) = find_next_bit((addr), (size), (bit) + 1)) -/* Temporary */ -#define for_each_bit(bit, addr, size) for_each_set_bit(bit, addr, size) - static __inline__ int get_bitmask_order(unsigned int count) { int order; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ebd22dbed861..6690e8bae7bb 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -158,7 +158,6 @@ enum rq_flag_bits { struct request { struct list_head queuelist; struct call_single_data csd; - int cpu; struct request_queue *q; @@ -166,9 +165,11 @@ struct request { enum rq_cmd_type_bits cmd_type; unsigned long atomic_flags; + int cpu; + /* the following two fields are internal, NEVER access directly */ - sector_t __sector; /* sector cursor */ unsigned int __data_len; /* total data len */ + sector_t __sector; /* sector cursor */ struct bio *bio; struct bio *biotail; @@ -201,20 +202,20 @@ struct request { unsigned short ioprio; + int ref_count; + void *special; /* opaque pointer available for LLD use */ char *buffer; /* kaddr of the current segment if available */ int tag; int errors; - int ref_count; - /* * when request is used as a packet command carrier */ - unsigned short cmd_len; unsigned char __cmd[BLK_MAX_CDB]; unsigned char *cmd; + unsigned short cmd_len; unsigned int extra_len; /* length of alignment and padding */ unsigned int sense_len; @@ -921,26 +922,7 @@ extern void blk_cleanup_queue(struct request_queue *); extern void blk_queue_make_request(struct request_queue *, make_request_fn *); extern void blk_queue_bounce_limit(struct request_queue *, u64); extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int); - -/* Temporary compatibility wrapper */ -static inline void blk_queue_max_sectors(struct request_queue *q, unsigned int max) -{ - blk_queue_max_hw_sectors(q, max); -} - extern void blk_queue_max_segments(struct request_queue *, unsigned short); - -static inline void blk_queue_max_phys_segments(struct request_queue *q, unsigned short max) -{ - blk_queue_max_segments(q, max); -} - -static inline void blk_queue_max_hw_segments(struct request_queue *q, unsigned short max) -{ - blk_queue_max_segments(q, max); -} - - extern void blk_queue_max_segment_size(struct request_queue *, unsigned int); extern void blk_queue_max_discard_sectors(struct request_queue *q, unsigned int max_discard_sectors); @@ -1030,11 +1012,6 @@ static inline int sb_issue_discard(struct super_block *sb, extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm); -#define MAX_PHYS_SEGMENTS 128 -#define MAX_HW_SEGMENTS 128 -#define SAFE_MAX_SECTORS 255 -#define MAX_SEGMENT_SIZE 65536 - enum blk_default_limits { BLK_MAX_SEGMENTS = 128, BLK_SAFE_MAX_SECTORS = 255, diff --git a/include/linux/caif/caif_socket.h b/include/linux/caif/caif_socket.h new file mode 100644 index 000000000000..8e5c8444a3f4 --- /dev/null +++ b/include/linux/caif/caif_socket.h @@ -0,0 +1,164 @@ +/* linux/caif_socket.h + * CAIF Definitions for CAIF socket and network layer + * Copyright (C) ST-Ericsson AB 2010 + * Author: Sjur Brendeland/ sjur.brandeland@stericsson.com + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef _LINUX_CAIF_SOCKET_H +#define _LINUX_CAIF_SOCKET_H + +#include <linux/types.h> + +#ifdef __KERNEL__ +#include <linux/socket.h> +#else +#include <sys/socket.h> +#endif + + +/** + * enum caif_link_selector - Physical Link Selection. + * @CAIF_LINK_HIGH_BANDW: Physical interface for high-bandwidth + * traffic. + * @CAIF_LINK_LOW_LATENCY: Physical interface for low-latency + * traffic. + * + * CAIF Link Layers can register their link properties. + * This enum is used for choosing between CAIF Link Layers when + * setting up CAIF Channels when multiple CAIF Link Layers exists. + */ +enum caif_link_selector { + CAIF_LINK_HIGH_BANDW, + CAIF_LINK_LOW_LATENCY +}; + +/** + * enum caif_channel_priority - CAIF channel priorities. + * + * @CAIF_PRIO_MIN: Min priority for a channel. + * @CAIF_PRIO_LOW: Low-priority channel. + * @CAIF_PRIO_NORMAL: Normal/default priority level. + * @CAIF_PRIO_HIGH: High priority level + * @CAIF_PRIO_MAX: Max priority for channel + * + * Priority can be set on CAIF Channels in order to + * prioritize between traffic on different CAIF Channels. + * These priority levels are recommended, but the priority value + * is not restricted to the values defined in this enum, any value + * between CAIF_PRIO_MIN and CAIF_PRIO_MAX could be used. + */ +enum caif_channel_priority { + CAIF_PRIO_MIN = 0x01, + CAIF_PRIO_LOW = 0x04, + CAIF_PRIO_NORMAL = 0x0f, + CAIF_PRIO_HIGH = 0x14, + CAIF_PRIO_MAX = 0x1F +}; + +/** + * enum caif_protocol_type - CAIF Channel type. + * @CAIFPROTO_AT: Classic AT channel. + * @CAIFPROTO_DATAGRAM: Datagram channel. + * @CAIFPROTO_DATAGRAM_LOOP: Datagram loopback channel, used for testing. + * @CAIFPROTO_UTIL: Utility (Psock) channel. + * @CAIFPROTO_RFM: Remote File Manager + * + * This enum defines the CAIF Channel type to be used. This defines + * the service to connect to on the modem. + */ +enum caif_protocol_type { + CAIFPROTO_AT, + CAIFPROTO_DATAGRAM, + CAIFPROTO_DATAGRAM_LOOP, + CAIFPROTO_UTIL, + CAIFPROTO_RFM, + _CAIFPROTO_MAX +}; +#define CAIFPROTO_MAX _CAIFPROTO_MAX + +/** + * enum caif_at_type - AT Service Endpoint + * @CAIF_ATTYPE_PLAIN: Connects to a plain vanilla AT channel. + */ +enum caif_at_type { + CAIF_ATTYPE_PLAIN = 2 +}; + +/** + * struct sockaddr_caif - the sockaddr structure for CAIF sockets. + * @u: Union of address data 'switched' by family. + * : + * @u.at: Applies when family = CAIFPROTO_AT. + * + * @u.at.type: Type of AT link to set up (enum caif_at_type). + * + * @u.util: Applies when family = CAIFPROTO_UTIL + * + * @u.util.service: Utility service name. + * + * @u.dgm: Applies when family = CAIFPROTO_DATAGRAM + * + * @u.dgm.connection_id: Datagram connection id. + * + * @u.dgm.nsapi: NSAPI of the PDP-Context. + * + * @u.rfm: Applies when family = CAIFPROTO_RFM + * + * @u.rfm.connection_id: Connection ID for RFM. + * + * @u.rfm.volume: Volume to mount. + * + * Description: + * This structure holds the connect parameters used for setting up a + * CAIF Channel. It defines the service to connect to on the modem. + */ +struct sockaddr_caif { + sa_family_t family; + union { + struct { + __u8 type; /* type: enum caif_at_type */ + } at; /* CAIFPROTO_AT */ + struct { + char service[16]; + } util; /* CAIFPROTO_UTIL */ + union { + __u32 connection_id; + __u8 nsapi; + } dgm; /* CAIFPROTO_DATAGRAM(_LOOP)*/ + struct { + __u32 connection_id; + char volume[16]; + } rfm; /* CAIFPROTO_RFM */ + } u; +}; + +/** + * enum caif_socket_opts - CAIF option values for getsockopt and setsockopt. + * + * @CAIFSO_LINK_SELECT: Selector used if multiple CAIF Link layers are + * available. Either a high bandwidth + * link can be selected (CAIF_LINK_HIGH_BANDW) or + * or a low latency link (CAIF_LINK_LOW_LATENCY). + * This option is of type __u32. + * Alternatively SO_BINDTODEVICE can be used. + * + * @CAIFSO_REQ_PARAM: Used to set the request parameters for a + * utility channel. (maximum 256 bytes). This + * option must be set before connecting. + * + * @CAIFSO_RSP_PARAM: Gets the response parameters for a utility + * channel. (maximum 256 bytes). This option + * is valid after a successful connect. + * + * < |