diff options
Diffstat (limited to 'include/linux')
31 files changed, 3968 insertions, 161 deletions
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 1219be4fb42e..83d2fbd81b93 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -14,6 +14,7 @@ #include <linux/list.h> #include <linux/cache.h> #include <linux/timer.h> +#include <linux/init.h> #include <asm/div64.h> #include <asm/io.h> @@ -148,14 +149,11 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * @disable: optional function to disable the clocksource * @mask: bitmask for two's complement * subtraction of non 64 bit counters - * @mult: cycle to nanosecond multiplier (adjusted by NTP) - * @mult_orig: cycle to nanosecond multiplier (unadjusted by NTP) + * @mult: cycle to nanosecond multiplier * @shift: cycle to nanosecond divisor (power of two) * @flags: flags describing special properties * @vread: vsyscall based read * @resume: resume function for the clocksource, if necessary - * @cycle_interval: Used internally by timekeeping core, please ignore. - * @xtime_interval: Used internally by timekeeping core, please ignore. */ struct clocksource { /* @@ -169,7 +167,6 @@ struct clocksource { void (*disable)(struct clocksource *cs); cycle_t mask; u32 mult; - u32 mult_orig; u32 shift; unsigned long flags; cycle_t (*vread)(void); @@ -181,19 +178,12 @@ struct clocksource { #define CLKSRC_FSYS_MMIO_SET(mmio, addr) do { } while (0) #endif - /* timekeeping specific data, ignore */ - cycle_t cycle_interval; - u64 xtime_interval; - u32 raw_interval; /* * Second part is written at each timer interrupt * Keep it in a different cache line to dirty no * more than one cache line. */ cycle_t cycle_last ____cacheline_aligned_in_smp; - u64 xtime_nsec; - s64 error; - struct timespec raw_time; #ifdef CONFIG_CLOCKSOURCE_WATCHDOG /* Watchdog related data, used by the framework */ @@ -202,8 +192,6 @@ struct clocksource { #endif }; -extern struct clocksource *clock; /* current clocksource */ - /* * Clock source flags bits:: */ @@ -212,6 +200,7 @@ extern struct clocksource *clock; /* current clocksource */ #define CLOCK_SOURCE_WATCHDOG 0x10 #define CLOCK_SOURCE_VALID_FOR_HRES 0x20 +#define CLOCK_SOURCE_UNSTABLE 0x40 /* simplify initialization of mask field */ #define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1) @@ -268,108 +257,15 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant) } /** - * clocksource_read: - Access the clocksource's current cycle value - * @cs: pointer to clocksource being read - * - * Uses the clocksource to return the current cycle_t value - */ -static inline cycle_t clocksource_read(struct clocksource *cs) -{ - return cs->read(cs); -} - -/** - * clocksource_enable: - enable clocksource - * @cs: pointer to clocksource - * - * Enables the specified clocksource. The clocksource callback - * function should start up the hardware and setup mult and field - * members of struct clocksource to reflect hardware capabilities. - */ -static inline int clocksource_enable(struct clocksource *cs) -{ - int ret = 0; - - if (cs->enable) - ret = cs->enable(cs); - - /* - * The frequency may have changed while the clocksource - * was disabled. If so the code in ->enable() must update - * the mult value to reflect the new frequency. Make sure - * mult_orig follows this change. - */ - cs->mult_orig = cs->mult; - - return ret; -} - -/** - * clocksource_disable: - disable clocksource - * @cs: pointer to clocksource - * - * Disables the specified clocksource. The clocksource callback - * function should power down the now unused hardware block to - * save power. - */ -static inline void clocksource_disable(struct clocksource *cs) -{ - /* - * Save mult_orig in mult so clocksource_enable() can - * restore the value regardless if ->enable() updates - * the value of mult or not. - */ - cs->mult = cs->mult_orig; - - if (cs->disable) - cs->disable(cs); -} - -/** - * cyc2ns - converts clocksource cycles to nanoseconds - * @cs: Pointer to clocksource - * @cycles: Cycles + * clocksource_cyc2ns - converts clocksource cycles to nanoseconds * - * Uses the clocksource and ntp ajdustment to convert cycle_ts to nanoseconds. + * Converts cycles to nanoseconds, using the given mult and shift. * * XXX - This could use some mult_lxl_ll() asm optimization */ -static inline s64 cyc2ns(struct clocksource *cs, cycle_t cycles) -{ - u64 ret = (u64)cycles; - ret = (ret * cs->mult) >> cs->shift; - return ret; -} - -/** - * clocksource_calculate_interval - Calculates a clocksource interval struct - * - * @c: Pointer to clocksource. - * @length_nsec: Desired interval length in nanoseconds. - * - * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment - * pair and interval request. - * - * Unless you're the timekeeping code, you should not be using this! - */ -static inline void clocksource_calculate_interval(struct clocksource *c, - unsigned long length_nsec) +static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift) { - u64 tmp; - - /* Do the ns -> cycle conversion first, using original mult */ - tmp = length_nsec; - tmp <<= c->shift; - tmp += c->mult_orig/2; - do_div(tmp, c->mult_orig); - - c->cycle_interval = (cycle_t)tmp; - if (c->cycle_interval == 0) - c->cycle_interval = 1; - - /* Go back from cycles -> shifted ns, this time use ntp adjused mult */ - c->xtime_interval = (u64)c->cycle_interval * c->mult; - c->raw_interval = ((u64)c->cycle_interval * c->mult_orig) >> c->shift; + return ((u64) cycles * mult) >> shift; } @@ -380,6 +276,8 @@ extern void clocksource_touch_watchdog(void); extern struct clocksource* clocksource_get_next(void); extern void clocksource_change_rating(struct clocksource *cs, int rating); extern void clocksource_resume(void); +extern struct clocksource * __init __weak clocksource_default_clock(void); +extern void clocksource_mark_unstable(struct clocksource *cs); #ifdef CONFIG_GENERIC_TIME_VSYSCALL extern void update_vsyscall(struct timespec *ts, struct clocksource *c); @@ -394,4 +292,6 @@ static inline void update_vsyscall_tz(void) } #endif +extern void timekeeping_notify(struct clocksource *clock); + #endif /* _LINUX_CLOCKSOURCE_H */ diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 161042746afc..44717eb47639 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -65,6 +65,9 @@ static inline int cpufreq_unregister_notifier(struct notifier_block *nb, struct cpufreq_governor; +/* /sys/devices/system/cpu/cpufreq: entry point for global variables */ +extern struct kobject *cpufreq_global_kobject; + #define CPUFREQ_ETERNAL (-1) struct cpufreq_cpuinfo { unsigned int max_freq; @@ -274,6 +277,13 @@ struct freq_attr { ssize_t (*store)(struct cpufreq_policy *, const char *, size_t count); }; +struct global_attr { + struct attribute attr; + ssize_t (*show)(struct kobject *kobj, + struct attribute *attr, char *buf); + ssize_t (*store)(struct kobject *a, struct attribute *b, + const char *c, size_t count); +}; /********************************************************************* * CPUFREQ 2.6. INTERFACE * diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h index f352f06fa063..5076fe0c8a96 100644 --- a/include/linux/delayacct.h +++ b/include/linux/delayacct.h @@ -18,7 +18,6 @@ #define _LINUX_DELAYACCT_H #include <linux/sched.h> -#include <linux/taskstats_kern.h> /* * Per-task flags relevant to delay accounting diff --git a/include/linux/fuse.h b/include/linux/fuse.h index cf593bf9fd32..3e2925a34bf0 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -30,6 +30,10 @@ * - add umask flag to input argument of open, mknod and mkdir * - add notification messages for invalidation of inodes and * directory entries + * + * 7.13 + * - make max number of background requests and congestion threshold + * tunables */ #ifndef _LINUX_FUSE_H @@ -37,11 +41,31 @@ #include <linux/types.h> +/* + * Version negotiation: + * + * Both the kernel and userspace send the version they support in the + * INIT request and reply respectively. + * + * If the major versions match then both shall use the smallest + * of the two minor versions for communication. + * + * If the kernel supports a larger major version, then userspace shall + * reply with the major version it supports, ignore the rest of the + * INIT message and expect a new INIT message from the kernel with a + * matching major version. + * + * If the library supports a larger major version, then it shall fall + * back to the major protocol version sent by the kernel for + * communication and reply with that major version (and an arbitrary + * supported minor version). + */ + /** Version number of this interface */ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 12 +#define FUSE_KERNEL_MINOR_VERSION 13 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -427,7 +451,8 @@ struct fuse_init_out { __u32 minor; __u32 max_readahead; __u32 flags; - __u32 unused; + __u16 max_background; + __u16 congestion_threshold; __u32 max_write; }; diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 4759917adc71..ff037f0b1b4e 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -91,7 +91,6 @@ enum hrtimer_restart { * @function: timer expiry callback function * @base: pointer to the timer base (per cpu and per clock) * @state: state information (See bit values above) - * @cb_entry: list head to enqueue an expired timer into the callback list * @start_site: timer statistics field to store the site where the timer * was started * @start_comm: timer statistics field to store the name of the process which @@ -108,7 +107,6 @@ struct hrtimer { enum hrtimer_restart (*function)(struct hrtimer *); struct hrtimer_clock_base *base; unsigned long state; - struct list_head cb_entry; #ifdef CONFIG_TIMER_STATS int start_pid; void *start_site; diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 3fd21d7cb6bf..2d02dfd7076c 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -223,19 +223,28 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /* Power bus message definitions */ -#define DEV_GRP_NULL 0x0 -#define DEV_GRP_P1 0x1 -#define DEV_GRP_P2 0x2 -#define DEV_GRP_P3 0x4 +/* The TWL4030/5030 splits its power-management resources (the various + * regulators, clock and reset lines) into 3 processor groups - P1, P2 and + * P3. These groups can then be configured to transition between sleep, wait-on + * and active states by sending messages to the power bus. See Section 5.4.2 + * Power Resources of TWL4030 TRM + */ -#define RES_GRP_RES 0x0 -#define RES_GRP_PP 0x1 -#define RES_GRP_RC 0x2 +/* Processor groups */ +#define DEV_GRP_NULL 0x0 +#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ +#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ +#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ + +/* Resource groups */ +#define RES_GRP_RES 0x0 /* Reserved */ +#define RES_GRP_PP 0x1 /* Power providers */ +#define RES_GRP_RC 0x2 /* Reset and control */ #define RES_GRP_PP_RC 0x3 -#define RES_GRP_PR 0x4 +#define RES_GRP_PR 0x4 /* Power references */ #define RES_GRP_PP_PR 0x5 #define RES_GRP_RC_PR 0x6 -#define RES_GRP_ALL 0x7 +#define RES_GRP_ALL 0x7 /* All resource groups */ #define RES_TYPE2_R0 0x0 @@ -246,6 +255,41 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); #define RES_STATE_SLEEP 0x8 #define RES_STATE_OFF 0x0 +/* Power resources */ + +/* Power providers */ +#define RES_VAUX1 1 +#define RES_VAUX2 2 +#define RES_VAUX3 3 +#define RES_VAUX4 4 +#define RES_VMMC1 5 +#define RES_VMMC2 6 +#define RES_VPLL1 7 +#define RES_VPLL2 8 +#define RES_VSIM 9 +#define RES_VDAC 10 +#define RES_VINTANA1 11 +#define RES_VINTANA2 12 +#define RES_VINTDIG 13 +#define RES_VIO 14 +#define RES_VDD1 15 +#define RES_VDD2 16 +#define RES_VUSB_1V5 17 +#define RES_VUSB_1V8 18 +#define RES_VUSB_3V1 19 +#define RES_VUSBCP 20 +#define RES_REGEN 21 +/* Reset and control */ +#define RES_NRES_PWRON 22 +#define RES_CLKEN 23 +#define RES_SYSEN 24 +#define RES_HFCLKOUT 25 +#define RES_32KCLKOUT 26 +#define RES_RESET 27 +/* Power Reference */ +#define RES_Main_Ref 28 + +#define TOTAL_RESOURCES 28 /* * Power Bus Message Format ... these can be sent individually by Linux, * but are usually part of downloaded scripts that are run when various @@ -327,6 +371,36 @@ struct twl4030_usb_data { enum twl4030_usb_mode usb_mode; }; +struct twl4030_ins { + u16 pmb_message; + u8 delay; +}; + +struct twl4030_script { + struct twl4030_ins *script; + unsigned size; + u8 flags; +#define TWL4030_WRST_SCRIPT (1<<0) +#define TWL4030_WAKEUP12_SCRIPT (1<<1) +#define TWL4030_WAKEUP3_SCRIPT (1<<2) +#define TWL4030_SLEEP_SCRIPT (1<<3) +}; + +struct twl4030_resconfig { + u8 resource; + u8 devgroup; /* Processor group that Power resource belongs to */ + u8 type; /* Power resource addressed, 6 / broadcast message */ + u8 type2; /* Power resource addressed, 3 / broadcast message */ +}; + +struct twl4030_power_data { + struct twl4030_script **scripts; + unsigned num; + struct twl4030_resconfig *resource_config; +}; + +extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); + struct twl4030_platform_data { unsigned irq_base, irq_end; struct twl4030_bci_platform_data *bci; @@ -334,6 +408,7 @@ struct twl4030_platform_data { struct twl4030_madc_platform_data *madc; struct twl4030_keypad_data *keypad; struct twl4030_usb_data *usb; + struct twl4030_power_data *power; /* LDO regulators */ struct regulator_init_data *vdac; @@ -364,7 +439,6 @@ int twl4030_sih_setup(int module); #define TWL4030_VAUX3_DEV_GRP 0x1F #define TWL4030_VAUX3_DEDICATED 0x22 - #if defined(CONFIG_TWL4030_BCI_BATTERY) || \ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) extern int twl4030charger_usb_en(int enable); diff --git a/include/linux/jbd.h b/include/linux/jbd.h index c2049a04fa0b..a1187a0c99b4 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -446,7 +446,7 @@ struct transaction_s /* * Where in the log does this transaction's commit start? [no locking] */ - unsigned long t_log_start; + unsigned int t_log_start; /* Number of buffers on the t_buffers list [j_list_lock] */ int t_nr_buffers; @@ -701,26 +701,26 @@ struct journal_s * Journal head: identifies the first unused block in the journal. * [j_state_lock] */ - unsigned long j_head; + unsigned int j_head; /* * Journal tail: identifies the oldest still-used block in the journal. * [j_state_lock] */ - unsigned long j_tail; + unsigned int j_tail; /* * Journal free: how many free blocks are there in the journal? * [j_state_lock] */ - unsigned long j_free; + unsigned int j_free; /* * Journal start and end: the block numbers of the first usable block * and one beyond the last usable block in the journal. [j_state_lock] */ - unsigned long j_first; - unsigned long j_last; + unsigned int j_first; + unsigned int j_last; /* * Device, blocksize and starting block offset for the location where we @@ -728,7 +728,7 @@ struct journal_s */ struct block_device *j_dev; int j_blocksize; - unsigned long j_blk_offset; + unsigned int j_blk_offset; /* * Device which holds the client fs. For internal journal this will be @@ -859,7 +859,7 @@ extern void __journal_clean_data_list(transaction_t *transaction); /* Log buffer allocation */ extern struct journal_head * journal_get_descriptor_buffer(journal_t *); -int journal_next_log_block(journal_t *, unsigned long *); +int journal_next_log_block(journal_t *, unsigned int *); /* Commit management */ extern void journal_commit_transaction(journal_t *); @@ -874,7 +874,7 @@ extern int journal_write_metadata_buffer(transaction_t *transaction, struct journal_head *jh_in, struct journal_head **jh_out, - unsigned long blocknr); + unsigned int blocknr); /* Transaction locking */ extern void __wait_on_journal (journal_t *); @@ -942,7 +942,7 @@ extern void journal_abort (journal_t *, int); extern int journal_errno (journal_t *); extern void journal_ack_err (journal_t *); extern int journal_clear_err (journal_t *); -extern int journal_bmap(journal_t *, unsigned long, unsigned long *); +extern int journal_bmap(journal_t *, unsigned int, unsigned int *); extern int journal_force_commit(journal_t *); /* @@ -976,14 +976,14 @@ extern int journal_init_revoke_caches(void); extern void journal_destroy_revoke(journal_t *); extern int journal_revoke (handle_t *, - unsigned long, struct buffer_head *); + unsigned int, struct buffer_head *); extern int journal_cancel_revoke(handle_t *, struct journal_head *); extern void journal_write_revoke_records(journal_t *, transaction_t *, int); /* Recovery revoke support */ -extern int journal_set_revoke(journal_t *, unsigned long, tid_t); -extern int journal_test_revoke(journal_t *, unsigned long, tid_t); +extern int journal_set_revoke(journal_t *, unsigned int, tid_t); +extern int journal_test_revoke(journal_t *, unsigned int, tid_t); extern void journal_clear_revoke(journal_t *); extern void journal_switch_revoke_table(journal_t *journal); diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index d97eb652d6ca..52695d3dfd0b 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -652,7 +652,7 @@ struct transaction_s * This transaction is being forced and some process is * waiting for it to finish. */ - int t_synchronous_commit:1; + unsigned int t_synchronous_commit:1; /* * For use by the filesystem to store fs-specific data diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h index 7a3f316e3848..e9aa4c9d749d 100644 --- a/include/linux/mfd/ab3100.h +++ b/include/linux/mfd/ab3100.h @@ -6,6 +6,8 @@ */ #include <linux/device.h> +#include <linux/workqueue.h> +#include <linux/regulator/machine.h> #ifndef MFD_AB3100_H #define MFD_AB3100_H @@ -56,6 +58,14 @@ #define AB3100_STR_BATT_REMOVAL (0x40) #define AB3100_STR_VBUS (0x80) +/* + * AB3100 contains 8 regulators, one external regulator controller + * and a buck converter, further the LDO E and buck converter can + * have separate settings if they are in sleep mode, this is + * modeled as a separate regulator. + */ +#define AB3100_NUM_REGULATORS 10 + /** * struct ab3100 * @access_mutex: lock out concurrent accesses to the AB3100 registers @@ -86,11 +96,30 @@ struct ab3100 { bool startup_events_read; }; -int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval); -int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval); -int ab3100_get_register_page(struct ab3100 *ab3100, +/** + * struct ab3100_platform_data + * Data supplied to initialize board connections to the AB3100 + * @reg_constraints: regulator constraints for target board + * the order of these constraints are: LDO A, C, D, E, + * F, G, H, K, EXT and BUCK. + * @reg_initvals: initial values for the regulator registers + * plus two sleep settings for LDO E and the BUCK converter. + * exactly AB3100_NUM_REGULATORS+2 values must be sent in. + * Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK, + * BUCK sleep, LDO D. (LDO D need to be initialized last.) + * @external_voltage: voltage level of the external regulator. + */ +struct ab3100_platform_data { + struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS]; + u8 reg_initvals[AB3100_NUM_REGULATORS+2]; + int external_voltage; +}; + +int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval); +int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval); +int ab3100_get_register_page_interruptible(struct ab3100 *ab3100, u8 first_reg, u8 *regvals, u8 numregs); -int ab3100_mask_and_set_register(struct ab3100 *ab3100, +int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 andmask, u8 ormask); u8 ab3100_get_chip_type(struct ab3100 *ab3100); int ab3100_event_register(struct ab3100 *ab3100, diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 49ef857cdb2d..11d740b8831d 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -23,6 +23,7 @@ */ struct mfd_cell { const char *name; + int id; int (*enable)(struct platform_device *dev); int (*disable)(struct platform_device *dev); diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h index c12c3c0932bf..e5124ceea769 100644 --- a/include/linux/mfd/ezx-pcap.h +++ b/include/linux/mfd/ezx-pcap.h @@ -25,9 +25,12 @@ struct pcap_chip; int ezx_pcap_write(struct pcap_chip *, u8, u32); int ezx_pcap_read(struct pcap_chip *, u8, u32 *); +int ezx_pcap_set_bits(struct pcap_chip *, u8, u32, u32); int pcap_to_irq(struct pcap_chip *, int); +int irq_to_pcap(struct pcap_chip *, int); int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *); int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]); +void pcap_set_ts_bits(struct pcap_chip *, u32); #define PCAP_SECOND_PORT 1 #define PCAP_CS_AH 2 @@ -224,7 +227,6 @@ int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]); #define PCAP_LED1 1 #define PCAP_BL0 2 #define PCAP_BL1 3 -#define PCAP_VIB 4 #define PCAP_LED_3MA 0 #define PCAP_LED_4MA 1 #define PCAP_LED_5MA 2 @@ -243,9 +245,6 @@ int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]); #define PCAP_LED0_C_SHIFT 15 #define PCAP_LED1_C_SHIFT 17 #define PCAP_BL1_SHIFT 20 -#define PCAP_VIB_MASK 0x3 -#define PCAP_VIB_SHIFT 20 -#define PCAP_VIB_EN (1 << 19) /* RTC */ #define PCAP_RTC_DAY_MASK 0x3fff diff --git a/include/linux/mfd/mc13783-private.h b/include/linux/mfd/mc13783-private.h new file mode 100644 index 000000000000..47e698cb0f16 --- /dev/null +++ b/include/linux/mfd/mc13783-private.h @@ -0,0 +1,396 @@ +/* + * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_MFD_MC13783_PRIV_H +#define __LINUX_MFD_MC13783_PRIV_H + +#include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/workqueue.h> +#include <linux/mutex.h> + +struct mc13783_irq { + void (*handler)(int, void *); + void *data; +}; + +#define MC13783_NUM_IRQ 2 +#define MC13783_IRQ_TS 0 +#define MC13783_IRQ_REGULATOR 1 + +#define MC13783_ADC_MODE_TS 1 +#define MC13783_ADC_MODE_SINGLE_CHAN 2 +#define MC13783_ADC_MODE_MULT_CHAN 3 + +struct mc13783 { + int revision; + struct device *dev; + struct spi_device *spi_device; + + int (*read_dev)(void *data, char reg, int count, u32 *dst); + int (*write_dev)(void *data, char reg, int count, const u32 *src); + + struct mutex io_lock; + void *io_data; + int irq; + unsigned int flags; + + struct mc13783_irq irq_handler[MC13783_NUM_IRQ]; + struct work_struct work; + struct completion adc_done; + unsigned int ts_active; + struct mutex adc_conv_lock; + + struct mc13783_regulator_init_data *regulators; + int num_regulators; +}; + +int mc13783_reg_read(struct mc13783 *, int reg_num, u32 *); +int mc13783_reg_write(struct mc13783 *, int, u32); +int mc13783_set_bits(struct mc13783 *, int, u32, u32); +int mc13783_free_irq(struct mc13783 *mc13783, int irq); +int mc13783_register_irq(struct mc13783 *mc13783, int irq, + void (*handler) (int, void *), void *data); + +#define MC13783_REG_INTERRUPT_STATUS_0 0 +#define MC13783_REG_INTERRUPT_MASK_0 1 +#define MC13783_REG_INTERRUPT_SENSE_0 2 +#define MC13783_REG_INTERRUPT_STATUS_1 3 +#define MC13783_REG_INTERRUPT_MASK_1 4 +#define MC13783_REG_INTERRUPT_SENSE_1 5 +#define MC13783_REG_POWER_UP_MODE_SENSE 6 +#define MC13783_REG_REVISION 7 +#define MC13783_REG_SEMAPHORE 8 +#define MC13783_REG_ARBITRATION_PERIPHERAL_AUDIO 9 +#define MC13783_REG_ARBITRATION_SWITCHERS 10 +#define MC13783_REG_ARBITRATION_REGULATORS_0 11 +#define MC13783_REG_ARBITRATION_REGULATORS_1 12 +#define MC13783_REG_POWER_CONTROL_0 13 +#define MC13783_REG_POWER_CONTROL_1 14 +#define MC13783_REG_POWER_CONTROL_2 15 +#define MC13783_REG_REGEN_ASSIGNMENT 16 +#define MC13783_REG_CONTROL_SPARE 17 +#define MC13783_REG_MEMORY_A 18 +#define MC13783_REG_MEMORY_B 19 +#define MC13783_REG_RTC_TIME 20 +#define MC13783_REG_RTC_ALARM 21 +#define MC13783_REG_RTC_DAY 22 +#define MC13783_REG_RTC_DAY_ALARM 23 +#define MC13783_REG_SWITCHERS_0 24 +#define MC13783_REG_SWITCHERS_1 25 +#define MC13783_REG_SWITCHERS_2 26 +#define MC13783_REG_SWITCHERS_3 27 +#define MC13783_REG_SWITCHERS_4 28 +#define MC13783_REG_SWITCHERS_5 29 +#define MC13783_REG_REGULATOR_SETTING_0 30 +#define MC13783_REG_REGULATOR_SETTING_1 31 +#define MC13783_REG_REGULATOR_MODE_0 32 +#define MC13783_REG_REGULATOR_MODE_1 33 +#define MC13783_REG_POWER_MISCELLANEOUS 34 +#define MC13783_REG_POWER_SPARE 35 +#define MC13783_REG_AUDIO_RX_0 36 +#define MC13783_REG_AUDIO_RX_1 37 +#define MC13783_REG_AUDIO_TX 38 +#define MC13783_REG_AUDIO_SSI_NETWORK 39 +#define MC13783_REG_AUDIO_CODEC 40 +#define MC13783_REG_AUDIO_STEREO_DAC 41 +#define MC13783_REG_AUDIO_SPARE 42 +#define MC13783_REG_ADC_0 43 +#define MC13783_REG_ADC_1 44 +#define MC13783_REG_ADC_2 45 +#define MC13783_REG_ADC_3 46 +#define MC13783_REG_ADC_4 47 +#define MC13783_REG_CHARGER 48 +#define MC13783_REG_USB 49 |