diff options
Diffstat (limited to 'scripts')
46 files changed, 1006 insertions, 676 deletions
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 6cabf20ce66a..0c3dc983439b 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -16,7 +16,7 @@ pound := \# dot-target = $(dir $@).$(notdir $@) ### -# The temporary file to save gcc -MD generated dependencies must not +# The temporary file to save gcc -MMD generated dependencies must not # contain a comma depfile = $(subst $(comma),_,$(dot-target).d) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 9fcbfac15d1d..2e8810b7e5ed 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -50,6 +50,12 @@ ifneq ($(hostprogs)$(hostcxxlibs-y)$(hostcxxlibs-m),) include scripts/Makefile.host endif +# Do not include userprogs rules unless needed. +userprogs := $(sort $(userprogs)) +ifneq ($(userprogs),) +include scripts/Makefile.userprogs +endif + ifndef obj $(warning kbuild: Makefile.build is included improperly) endif @@ -63,19 +69,27 @@ endif # =========================================================================== +# subdir-builtin and subdir-modorder may contain duplications. Use $(sort ...) +subdir-builtin := $(sort $(filter %/built-in.a, $(real-obj-y))) +subdir-modorder := $(sort $(filter %/modules.order, $(obj-m))) + +targets-for-builtin := $(extra-y) + ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),) -lib-target := $(obj)/lib.a +targets-for-builtin += $(obj)/lib.a endif ifdef need-builtin -builtin-target := $(obj)/built-in.a +targets-for-builtin += $(obj)/built-in.a endif -ifeq ($(CONFIG_MODULES)$(need-modorder),y1) -modorder-target := $(obj)/modules.order +targets-for-modules := $(patsubst %.o, %.mod, $(filter %.o, $(obj-m))) + +ifdef need-modorder +targets-for-modules += $(obj)/modules.order endif -mod-targets := $(patsubst %.o, %.mod, $(obj-m)) +targets += $(targets-for-builtin) $(targets-for-modules) # Linus' kernel sanity checking tool ifeq ($(KBUILD_CHECKSRC),1) @@ -274,8 +288,6 @@ cmd_mod = { \ $(obj)/%.mod: $(obj)/%.o FORCE $(call if_changed,mod) -targets += $(mod-targets) - quiet_cmd_cc_lst_c = MKLST $@ cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \ $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \ @@ -348,8 +360,9 @@ endif $(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE $(call if_changed_rule,as_o_S) -targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y) -targets += $(extra-y) $(always-y) $(MAKECMDGOALS) +targets += $(filter-out $(subdir-builtin), $(real-obj-y)) +targets += $(filter-out $(subdir-modorder), $(real-obj-m)) +targets += $(lib-y) $(always-y) $(MAKECMDGOALS) # Linker scripts preprocessor (.lds.S -> .lds) # --------------------------------------------------------------------------- @@ -373,44 +386,40 @@ $(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler # --------------------------------------------------------------------------- # To build objects in subdirs, we need to descend into the directories -$(obj)/%/built-in.a: $(obj)/% ; +$(subdir-builtin): $(obj)/%/built-in.a: $(obj)/% ; +$(subdir-modorder): $(obj)/%/modules.order: $(obj)/% ; # # Rule to compile a set of .o files into one .a file (without symbol table) # -ifdef builtin-target quiet_cmd_ar_builtin = AR $@ cmd_ar_builtin = rm -f $@; $(AR) cDPrST $@ $(real-prereqs) -$(builtin-target): $(real-obj-y) FORCE +$(obj)/built-in.a: $(real-obj-y) FORCE $(call if_changed,ar_builtin) -targets += $(builtin-target) -endif # builtin-target - # # Rule to create modules.order file # # Create commands to either record .ko file or cat modules.order from # a subdirectory -$(modorder-target): $(subdir-ym) FORCE - $(Q){ $(foreach m, $(modorder), \ - $(if $(filter %/modules.order, $m), cat $m, echo $m);) :; } \ +# Add $(obj-m) as the prerequisite to avoid updating the timestamp of +# modules.order unless contained modules are updated. + +cmd_modules_order = { $(foreach m, $(real-prereqs), \ + $(if $(filter %/modules.order, $m), cat $m, echo $(patsubst %.o,%.ko,$m));) :; } \ | $(AWK) '!x[$$0]++' - > $@ +$(obj)/modules.order: $(obj-m) FORCE + $(call if_changed,modules_order) + # # Rule to compile a set of .o files into one .a file (with symbol table) # -ifdef lib-target - -$(lib-target): $(lib-y) FORCE +$(obj)/lib.a: $(lib-y) FORCE $(call if_changed,ar) -targets += $(lib-target) - -endif - # NOTE: # Do not replace $(filter %.o,^) with $(real-prereqs). When a single object # module is turned into a multi object module, $^ will contain header file @@ -473,8 +482,8 @@ endif else -__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ - $(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \ +__build: $(if $(KBUILD_BUILTIN), $(targets-for-builtin)) \ + $(if $(KBUILD_MODULES), $(targets-for-modules)) \ $(subdir-ym) $(always-y) @: @@ -487,8 +496,8 @@ PHONY += $(subdir-ym) $(subdir-ym): $(Q)$(MAKE) $(build)=$@ \ $(if $(filter $@/, $(KBUILD_SINGLE_TARGETS)),single-build=) \ - need-builtin=$(if $(filter $@/built-in.a, $(subdir-obj-y)),1) \ - need-modorder=$(if $(need-modorder),$(if $(filter $@/modules.order, $(modorder)),1)) + need-builtin=$(if $(filter $@/built-in.a, $(subdir-builtin)),1) \ + need-modorder=$(if $(filter $@/modules.order, $(subdir-modorder)),1) # Add FORCE to the prequisites of a target to force it to be always rebuilt. # --------------------------------------------------------------------------- diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean index 075f0cc2d8d7..e2c76122319d 100644 --- a/scripts/Makefile.clean +++ b/scripts/Makefile.clean @@ -29,7 +29,7 @@ subdir-ymn := $(addprefix $(obj)/,$(subdir-ymn)) __clean-files := $(extra-y) $(extra-m) $(extra-) \ $(always) $(always-y) $(always-m) $(always-) $(targets) $(clean-files) \ - $(hostprogs) $(hostprogs-y) $(hostprogs-m) $(hostprogs-) \ + $(hostprogs) $(hostprogs-y) $(hostprogs-m) $(hostprogs-) $(userprogs) \ $(hostcxxlibs-y) $(hostcxxlibs-m) __clean-files := $(filter-out $(no-clean-files), $(__clean-files)) diff --git a/scripts/Makefile.host b/scripts/Makefile.host index 2045855d0b75..c8a4a033dc3e 100644 --- a/scripts/Makefile.host +++ b/scripts/Makefile.host @@ -88,8 +88,8 @@ _hostcxx_flags += -I $(objtree)/$(obj) endif endif -hostc_flags = -Wp,-MD,$(depfile) $(_hostc_flags) -hostcxx_flags = -Wp,-MD,$(depfile) $(_hostcxx_flags) +hostc_flags = -Wp,-MMD,$(depfile) $(_hostc_flags) +hostcxx_flags = -Wp,-MMD,$(depfile) $(_hostcxx_flags) ##### # Compile programs on the host diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 97547108ee7f..127f2a7e3ced 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -4,8 +4,18 @@ asflags-y += $(EXTRA_AFLAGS) ccflags-y += $(EXTRA_CFLAGS) cppflags-y += $(EXTRA_CPPFLAGS) ldflags-y += $(EXTRA_LDFLAGS) +ifneq ($(always),) +$(warning 'always' is deprecated. Please use 'always-y' instead) always-y += $(always) -hostprogs += $(hostprogs-y) $(hostprogs-m) +endif +ifneq ($(hostprogs-y),) +$(warning 'hostprogs-y' is deprecated. Please use 'hostprogs' instead) +hostprogs += $(hostprogs-y) +endif +ifneq ($(hostprogs-m),) +$(warning 'hostprogs-m' is deprecated. Please use 'hostprogs' instead) +hostprogs += $(hostprogs-m) +endif # flags that take effect in current and sub directories KBUILD_AFLAGS += $(subdir-asflags-y) @@ -22,40 +32,35 @@ obj-m := $(filter-out $(obj-y),$(obj-m)) # Filter out objects already built-in lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m))) -# Determine modorder. -# Unfortunately, we don't have information about ordering between -y -# and -m subdirs. Just put -y's first. -modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko)) +# Subdirectories we need to descend into +subdir-ym := $(sort $(subdir-y) $(subdir-m) \ + $(patsubst %/,%, $(filter %/, $(obj-y) $(obj-m)))) + +# Handle objects in subdirs: +# - If we encounter foo/ in $(obj-y), replace it by foo/built-in.a and +# foo/modules.order +# - If we encounter foo/ in $(obj-m), replace it by foo/modules.order +# +# Generate modules.order to determine modorder. Unfortunately, we don't have +# information about ordering between -y and -m subdirs. Just put -y's first. + +ifdef need-modorder +obj-m := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m)) +else +obj-m := $(filter-out %/, $(obj-m)) +endif -# Handle objects in subdirs -# --------------------------------------------------------------------------- -# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.a -# and add the directory to the list of dirs to descend into: $(subdir-y) -# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) -# and add the directory to the list of dirs to descend into: $(subdir-m) -__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y))) -subdir-y += $(__subdir-y) -__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m))) -subdir-m += $(__subdir-m) ifdef need-builtin obj-y := $(patsubst %/, %/built-in.a, $(obj-y)) else obj-y := $(filter-out %/, $(obj-y)) endif -obj-m := $(filter-out %/, $(obj-m)) - -# Subdirectories we need to descend into -subdir-ym := $(sort $(subdir-y) $(subdir-m)) # If $(foo-objs), $(foo-y), $(foo-m), or $(foo-) exists, foo.o is a composite object multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))), $(m)))) multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))), $(m)))) multi-used := $(multi-used-y) $(multi-used-m) -# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to -# tell kbuild to descend -subdir-obj-y := $(filter %/built-in.a, $(obj-y)) - # Replace multi-part objects by their individual parts, # including built-in.a from subdirectories real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) @@ -78,10 +83,8 @@ endif extra-y := $(addprefix $(obj)/,$(extra-y)) always-y := $(addprefix $(obj)/,$(always-y)) targets := $(addprefix $(obj)/,$(targets)) -modorder := $(addprefix $(obj)/,$(modorder)) obj-m := $(addprefix $(obj)/,$(obj-m)) lib-y := $(addprefix $(obj)/,$(lib-y)) -subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y)) real-obj-y := $(addprefix $(obj)/,$(real-obj-y)) real-obj-m := $(addprefix $(obj)/,$(real-obj-m)) multi-used-m := $(addprefix $(obj)/,$(multi-used-m)) @@ -171,22 +174,22 @@ modkern_aflags = $(if $(part-of-module), \ $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE), \ $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)) -c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ +c_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ -include $(srctree)/include/linux/compiler_types.h \ $(_c_flags) $(modkern_cflags) \ $(basename_flags) $(modname_flags) -a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ +a_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ $(_a_flags) $(modkern_aflags) -cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ +cpp_flags = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ $(_cpp_flags) ld_flags = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) DTC_INCLUDE := $(srctree)/scripts/dtc/include-prefixes -dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \ +dtc_cpp_flags = -Wp,-MMD,$(depfile).pre.tmp -nostdinc \ $(addprefix -I,$(DTC_INCLUDE)) \ -undef -D__DTS__ @@ -241,7 +244,7 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ # --------------------------------------------------------------------------- quiet_cmd_gzip = GZIP $@ - cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@ + cmd_gzip = cat $(real-prereqs) | $(_GZIP) -n -f -9 > $@ # DTC # --------------------------------------------------------------------------- @@ -287,13 +290,13 @@ $(obj)/%.dtb.S: $(obj)/%.dtb FORCE quiet_cmd_dtc = DTC $@ cmd_dtc = mkdir -p $(dir ${dtc-tmp}) ; \ $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ - $(DTC) -O $(2) -o $@ -b 0 \ + $(DTC) -O $(patsubst .%,%,$(suffix $@)) -o $@ -b 0 \ $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE - $(call if_changed_dep,dtc,dtb) + $(call if_changed_dep,dtc) DT_CHECKER ?= dt-validate DT_BINDING_DIR := Documentation/devicetree/bindings @@ -304,12 +307,12 @@ quiet_cmd_dtb_check = CHECK $@ cmd_dtb_check = $(DT_CHECKER) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ define rule_dtc - $(call cmd_and_fixdep,dtc,yaml) + $(call cmd_and_fixdep,dtc) $(call cmd,dtb_check) endef $(obj)/%.dt.yaml: $(src)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE - $(call if_changed_rule,dtc) + $(call if_changed_rule,dtc,yaml) dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) @@ -334,19 +337,19 @@ printf "%08x\n" $$dec_size | \ ) quiet_cmd_bzip2 = BZIP2 $@ - cmd_bzip2 = { cat $(real-prereqs) | bzip2 -9; $(size_append); } > $@ + cmd_bzip2 = { cat $(real-prereqs) | $(_BZIP2) -9; $(size_append); } > $@ # Lzma # --------------------------------------------------------------------------- quiet_cmd_lzma = LZMA $@ - cmd_lzma = { cat $(real-prereqs) | lzma -9; $(size_append); } > $@ + cmd_lzma = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@ quiet_cmd_lzo = LZO $@ - cmd_lzo = { cat $(real-prereqs) | lzop -9; $(size_append); } > $@ + cmd_lzo = { cat $(real-prereqs) | $(_LZOP) -9; $(size_append); } > $@ quiet_cmd_lz4 = LZ4 $@ - cmd_lz4 = { cat $(real-prereqs) | lz4c -l -c1 stdin stdout; \ + cmd_lz4 = { cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout; \ $(size_append); } > $@ # U-Boot mkimage @@ -393,7 +396,7 @@ quiet_cmd_xzkern = XZKERN $@ $(size_append); } > $@ quiet_cmd_xzmisc = XZMISC $@ - cmd_xzmisc = cat $(real-prereqs) | xz --check=crc32 --lzma2=dict=1MiB > $@ + cmd_xzmisc = cat $(real-prereqs) | $(XZ) --check=crc32 --lzma2=dict=1MiB > $@ # ASM offsets # --------------------------------------------------------------------------- diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index 957eed6a17a5..3651cbf6ad49 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -43,34 +43,30 @@ __modpost: include include/config/auto.conf include scripts/Kbuild.include -kernelsymfile := $(objtree)/Module.symvers -modulesymfile := $(firstword $(KBUILD_EXTMOD))/Module.symvers - MODPOST = scripts/mod/modpost \ $(if $(CONFIG_MODVERSIONS),-m) \ $(if $(CONFIG_MODULE_SRCVERSION_ALL),-a) \ - $(if $(KBUILD_EXTMOD),-i,-o) $(kernelsymfile) \ - $(if $(KBUILD_EXTMOD),$(addprefix -e ,$(KBUILD_EXTRA_SYMBOLS))) \ - $(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \ $(if $(CONFIG_SECTION_MISMATCH_WARN_ONLY),,-E) \ - $(if $(CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS)$(KBUILD_NSDEPS),-N) \ - $(if $(KBUILD_MODPOST_WARN),-w) + $(if $(KBUILD_MODPOST_WARN),-w) \ + -o $@ ifdef MODPOST_VMLINUX -quiet_cmd_modpost = MODPOST vmlinux.o - cmd_modpost = $(MODPOST) vmlinux.o +quiet_cmd_modpost = MODPOST $@ + cmd_modpost = $(MODPOST) $< -__modpost: +vmlinux.symvers: vmlinux.o $(call cmd,modpost) -else +__modpost: vmlinux.symvers -MODPOST += $(subst -i,-n,$(filter -i,$(MAKEFLAGS))) -s -T - \ - $(if $(KBUILD_NSDEPS),-d $(MODULES_NSDEPS)) +else ifeq ($(KBUILD_EXTMOD),) -MODPOST += $(wildcard vmlinux) + +input-symdump := vmlinux.symvers +output-symdump := Module.symvers + else # set src + obj - they may be used in the modules's Makefile @@ -80,22 +76,57 @@ src := $(obj) # Include the module's Makefile to find KBUILD_EXTRA_SYMBOLS include $(if $(wildcard $(KBUILD_EXTMOD)/Kbuild), \ $(KBUILD_EXTMOD)/Kbuild, $(KBUILD_EXTMOD)/Makefile) + +# modpost option for external modules +MODPOST += -e + +input-symdump := Module.symvers $(KBUILD_EXTRA_SYMBOLS) +output-symdump := $(KBUILD_EXTMOD)/Module.symvers + +endif + +# modpost options for modules (both in-kernel and external) +MODPOST += \ + $(addprefix -i ,$(wildcard $(input-symdump))) \ + $(if $(KBUILD_NSDEPS),-d $(MODULES_NSDEPS)) \ + $(if $(CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS)$(KBUILD_NSDEPS),-N) + +# 'make -i -k' ignores compile errors, and builds as many modules as possible. +ifneq ($(findstring i,$(filter-out --%,$(MAKEFLAGS))),) +MODPOST += -n endif -# find all modules listed in modules.order -modules := $(sort $(shell cat $(MODORDER))) +# Clear VPATH to not search for *.symvers in $(srctree). Check only $(objtree). +VPATH := +$(input-symdump): + @echo >&2 'WARNING: Symbol version dump "$@" is missing.' + @echo >&2 ' Modules may not have dependencies or modversions.' -# Read out modules.order instead of expanding $(modules) to pass in modpost. +# Read out modules.order to pass in modpost. # Otherwise, allmodconfig would fail with "Argument list too long". -quiet_cmd_modpost = MODPOST $(words $(modules)) modules - cmd_modpost = sed 's/ko$$/o/' $(MODORDER) | $(MODPOST) +quiet_cmd_modpost = MODPOST $@ + cmd_modpost = sed 's/ko$$/o/' $< | $(MODPOST) -T - -__modpost: - $(call cmd,modpost) +$(output-symdump): $(MODORDER) $(input-symdump) FORCE + $(call if_changed,modpost) + +targets += $(output-symdump) + +__modpost: $(output-symdump) ifneq ($(KBUILD_MODPOST_NOFINAL),1) $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal endif +PHONY += FORCE +FORCE: + +existing-targets := $(wildcard $(sort $(targets))) + +-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) + +PHONY += FORCE +FORCE: + endif .PHONY: $(PHONY) diff --git a/scripts/Makefile.package b/scripts/Makefile.package index 02135d2671a6..b2b6153af63a 100644 --- a/scripts/Makefile.package +++ b/scripts/Makefile.package @@ -45,7 +45,7 @@ if test "$(objtree)" != "$(srctree)"; then \ false; \ fi ; \ $(srctree)/scripts/setlocalversion --save-scmversion; \ -tar -cz $(RCS_TAR_IGNORE) -f $(2).tar.gz \ +tar -I $(_GZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \ --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \ rm -f $(objtree)/.scmversion @@ -127,9 +127,9 @@ util/PERF-VERSION-GEN $(CURDIR)/$(perf-tar)/); \ tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \ rm -r $(perf-tar); \ $(if $(findstring tar-src,$@),, \ -$(if $(findstring bz2,$@),bzip2, \ -$(if $(findstring gz,$@),gzip, \ -$(if $(findstring xz,$@),xz, \ +$(if $(findstring bz2,$@),$(_BZIP2), \ +$(if $(findstring gz,$@),$(_GZIP), \ +$(if $(findstring xz,$@),$(XZ), \ $(error unknown target $@)))) \ -f -9 $(perf-tar).tar) diff --git a/scripts/Makefile.userprogs b/scripts/Makefile.userprogs new file mode 100644 index 000000000000..fb415297337a --- /dev/null +++ b/scripts/Makefile.userprogs @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Build userspace programs for the target system +# + +# Executables compiled from a single .c file +user-csingle := $(foreach m, $(userprogs), $(if $($(m)-objs),,$(m))) + +# Executables linked based on several .o files +user-cmulti := $(foreach m, $(userprogs), $(if $($(m)-objs),$(m))) + +# Objects compiled from .c files +user-cobjs := $(sort $(foreach m, $(userprogs), $($(m)-objs))) + +user-csingle := $(addprefix $(obj)/, $(user-csingle)) +user-cmulti := $(addprefix $(obj)/, $(user-cmulti)) +user-cobjs := $(addprefix $(obj)/, $(user-cobjs)) + +user_ccflags = -Wp,-MMD,$(depfile) $(KBUILD_USERCFLAGS) $(userccflags) \ + $($(target-stem)-userccflags) +user_ldflags = $(KBUILD_USERLDFLAGS) $(userldflags) $($(target-stem)-userldflags) + +# Create an executable from a single .c file +quiet_cmd_user_cc_c = CC [U] $@ + cmd_user_cc_c = $(CC) $(user_ccflags) $(user_ldflags) -o $@ $< \ + $($(target-stem)-userldlibs) +$(user-csingle): $(obj)/%: $(src)/%.c FORCE + $(call if_changed_dep,user_cc_c) + +# Link an executable based on list of .o files +quiet_cmd_user_ld = LD [U] $@ + cmd_user_ld = $(CC) $(user_ldflags) -o $@ \ + $(addprefix $(obj)/, $($(target-stem)-objs)) \ + $($(target-stem)-userldlibs) +$(user-cmulti): FORCE + $(call if_changed,user_ld) +$(call multi_depend, $(user-cmulti), , -objs) + +# Create .o file from a .c file +quiet_cmd_user_cc_o_c = CC [U] $@ + cmd_user_cc_o_c = $(CC) $(user_ccflags) -c -o $@ $< +$(user-cobjs): $(obj)/%.o: $(src)/%.c FORCE + $(call if_changed_dep,user_cc_o_c) + +targets += $(user-csingle) $(user-cmulti) $(user-cobjs) diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c index 877ca2c88246..d98540552941 100644 --- a/scripts/basic/fixdep.c +++ b/scripts/basic/fixdep.c @@ -160,7 +160,7 @@ struct item { struct item *next; unsigned int len; unsigned int hash; - char name[0]; + char name[]; }; #define HASHSZ 256 diff --git a/scripts/bpf_helpers_doc.py b/scripts/bpf_helpers_doc.py index f43d193aff3a..91fa668fa860 100755 --- a/scripts/bpf_helpers_doc.py +++ b/scripts/bpf_helpers_doc.py @@ -318,6 +318,11 @@ may be interested in: of eBPF maps are used with a given helper function. * *kernel/bpf/* directory contains other files in which additional helpers are defined (for cgroups, sockmaps, etc.). +* The bpftool utility can be used to probe the availability of helper functions + on the system (as well as supported program and map types, and a number of + other parameters). To do so, run **bpftool feature probe** (see + **bpftool-feature**\ (8) for details). Add the **unprivileged** keyword to + list features available to unprivileged users. Compatibility between helper functions and program types can generally be found in the files where helper functions are defined. Look for the **struct @@ -338,6 +343,7 @@ SEE ALSO ======== **bpf**\ (2), +**bpftool**\ (8), **cgroups**\ (7), **ip**\ (8), **perf_event_open**\ (2), @@ -414,6 +420,7 @@ class PrinterHelpers(Printer): 'struct sk_reuseport_md', 'struct sockaddr', 'struct tcphdr', + 'struct seq_file', 'struct __sk_buff', 'struct sk_msg_md', @@ -450,6 +457,7 @@ class PrinterHelpers(Printer): 'struct sk_reuseport_md', 'struct sockaddr', 'struct tcphdr', + 'struct seq_file', } mapped_types = { 'u8': '__u8', diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 7d237a4598ae..197436b20288 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -51,7 +51,7 @@ my %ignore_type = (); my @ignore = (); my $help = 0; my $configuration_file = ".checkpatch.conf"; -my $max_line_length = 80; +my $max_line_length = 100; my $ignore_perl_version = 0; my $minimum_perl_version = 5.10.0; my $min_conf_desc_length = 4; @@ -97,9 +97,11 @@ Options: --types TYPE(,TYPE2...) show only these comma separated message types --ignore TYPE(,TYPE2...) ignore various comma separated message types --show-types show the specific message type in the output - --max-line-length=n set the maximum line length, if exceeded, warn + --max-line-length=n set the maximum line length, (default $max_line_length) + if exceeded, warn on patches + requires --strict for use with --file --min-conf-desc-length=n set the min description length, if shorter, warn - --tab-size=n set the number of spaces for tab (default 8) + --tab-size=n set the number of spaces for tab (default $tabsize) --root=PATH PATH to the kernel tree root --no-summary suppress the per-file summary --mailback only produce a report in case of warning |