summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/aspeed
AgeCommit message (Collapse)AuthorFilesLines
2024-09-11Merge tag 'aspeed-6.12-devicetree' of ↵Arnd Bergmann31-311/+8936
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt ASPEED device tree updates for 6.12 - New machines * IBM P11 AST2600 BMC machines, named Blueridge and Fuji * Meta's Catalina AST2600 BMC - Updates to harma, minerva, mtmitchell, mtjade, system1, SPC621D8HM3 - Various changes to the dtsi to keep the YAML checker happy * tag 'aspeed-6.12-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (52 commits) ARM: dts: aspeed: catalina: Update io expander line names ARM: dts: aspeed: catalina: Add pdb cpld io expander ARM: dts: aspeed: harma: Remove pca9546 ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warnings ARM: dts: aspeed: harma: Enable mctp controller ARM: dts: aspeed: harma: Add temperature device ARM: dts: aspeed: harma: Add fru device ARM: dts: aspeed: harma: Remove multi-host property ARM: dts: aspeed: harma: Add power monitor xdp710 ARM: dts: aspeed: harma: Add ina238 ARM: dts: aspeed: harma: Add sgpio name ARM: dts: aspeed: harma: Add VR devices ARM: dts: aspeed: harma: Revise hsc chip ARM: dts: aspeed-g6: Drop cells properties from ethernet nodes ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodes ARM: dts: aspeed: Clean up AST2500 pinctrl properties ARM: dts: aspeed: Remove undocumented XDMA nodes ARM: dts: aspeed: Specify required properties for sram node ARM: dts: aspeed: Specify correct generic compatible for CVIC ARM: dts: aspeed: Fix coprocessor interrupt controller node name ... Link: https://lore.kernel.org/r/CACPK8XeGDUrbJ-OaxqQBR=aVVYyrKGnvT1ZKXO0vPHpsjQ_i9g@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05ARM: dts: Fix undocumented LM75 compatible nodesRob Herring1-1/+1
"lm75" without any vendor is undocumented. It works with the Linux kernel since the I2C subsystem will do matches of the compatible string without a vendor prefix to the i2c_device_id and/or driver name. Mostly replace "lm75" with "national,lm75" as that's the original part vendor and the compatible which matches what "lm75" matched with. In a couple of cases the node name or compatible gives a clue to the actual part and vendor and a more specific compatible can be used. In these cases, it does change the variant the kernel picks. "nct75" is an OnSemi part which is compatible with TI TMP75C based on a comparison of the OnSemi NCT75 datasheet and configuration the Linux driver uses. Adding an OnSemi compatible would be an ABI change. "nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53 boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are 11-bit resolution and 100ms sample time. The "national,lm75a" is 9-bit, so "national,lm75b" is the closest match for both NXP variants. While we're here, fix the node names to use the generic name "temperature-sensor". Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx53-mba53.dts, imx53-tqma53.dtsi Link: https://lore.kernel.org/r/20240816164717.1585629-1-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-08-27ARM: dts: aspeed: catalina: Update io expander line namesPotin Lai1-2/+2
io_expander7 - P1-5: MCU_GPIO - P1-6: MCU_RST_N - P1-7: MCU_RECOVERY_N io_expander8 - P1-5: SEC_MCU_GPIO - P1-6: SEC_MCU_RST_N - P1-7: SEC_MCU_RECOVERY_N Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-2-4bfd8dad819c@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-27ARM: dts: aspeed: catalina: Add pdb cpld io expanderPotin Lai1-0/+131
Add more IO expanders which are emulated by the PDB CPLD. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20240823-catalina-ioexp-update-v1-1-4bfd8dad819c@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Remove pca9546Peter Yin1-31/+0
Remove pca9546 device from i2c bus 9. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-12-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warningsPeter Yin1-6/+5
Revise spi-gpio node and property name and remove max-ngpios. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-11-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Enable mctp controllerPeter Yin1-0/+8
Enable the mctp controller in i2c9. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-10-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add temperature devicePeter Yin1-0/+10
Add temperature device in i2c0 and i2c2. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-9-peteryin.openbmc@gmail.com [andrew: Fixed 'deivce' typo in commit message] Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add fru devicePeter Yin1-0/+25
Add Aegis fru device and gpio expander device in bus 11. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-8-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Remove multi-host propertyPeter Yin1-1/+0
Harma is single host, so remove multi-host property. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-7-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add power monitor xdp710Peter Yin1-0/+5
Add HSC xdp710 device in i2c4. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-6-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add ina238Peter Yin1-0/+48
Add INA238 power monitor for Harma fan board. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-5-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add sgpio namePeter Yin1-2/+3
Add power-chassis-control and power-chassis-power for phosphor-power. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-4-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Add VR devicesPeter Yin1-0/+24
Add isl69260, xdpe152c4 devices. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-3-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: harma: Revise hsc chipPeter Yin1-5/+4
Revise HSC chip name and address to match LTC4287. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240801160136.1281291-2-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed-g6: Drop cells properties from ethernet nodesAndrew Jeffery1-8/+0
These are not specified in the binding and produce warnings such as the following: arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:254.27-262.5: Warning (avoid_unnecessary_addr_size): /ahb/ethernet@1e670000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:264.27-272.5: Warning (avoid_unnecessary_addr_size): /ahb/ethernet@1e690000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dtb: ethernet@1e660000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-7-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodesAndrew Jeffery1-4/+4
Squash warnings such as: arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dtb: ftgmac@1e670000: $nodename:0: 'ftgmac@1e670000' does not match '^ethernet(@.*)?$' Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-6-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Clean up AST2500 pinctrl propertiesAndrew Jeffery13-50/+0
Many platforms were specifying the `aspeed,external-nodes` property required by the AST2500 pinctrl. However, its been specified in the pinctrl node directly in aspeed-g5.dtsi for quite a long time now. Remove the unnecessary override from all relevant platform dts files. Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-5-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Remove undocumented XDMA nodesAndrew Jeffery9-59/+0
There's no binding defined for the device, so remove it from the devicetrees until someone has the motivation to write one. Squash warnings such as: arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dtb: /ahb/apb@1e6e0000/xdma@1e6e7000: failed to match any schema with compatible: ['aspeed,ast2500-xdma'] Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-4-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Specify required properties for sram nodeAndrew Jeffery2-0/+6
Squash warnings such as: ``` arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: sram@1e720000: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: sram@1e720000: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: sram@1e720000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# ``` Fixes: d44a1138cd82 ("arm/dts: Add Aspeed ast2400 device tree") Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-3-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Specify correct generic compatible for CVICAndrew Jeffery2-2/+2
The ASPEED CVIC binding documents `aspeed,cvic` as the required generic compatible, but the devicetrees contained `aspeed-cvic`. Update the devictrees to use `aspeed,cvic` as documented and as required by the driver implementation. Presumably the bug was the result of some incoherent thoughts while removing the SoC name at the time of writing. Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-2-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: Fix coprocessor interrupt controller node nameAndrew Jeffery2-2/+2
Squash schema warnings such as: arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: copro-interrupt-controller@1e6c2000: $nodename:0: 'copro-interrupt-controller@1e6c2000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-1-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add LEDsChanh Nguyen1-0/+31
Add LED nodes as the gpio-leds devices. They are led-bmc-ready, led-sw-heartbeat, led-identify, led-fault, led-fan-fault, led-psu-fault Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-6-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15Chanh Nguyen1-0/+23
Enable the BMC I2C10. Enable the BMC I2C15 and add the GPIO Expander as a child node. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-5-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add Riser cardsChanh Nguyen1-0/+64
Define the I2C alias ports for the riser cards. Add the i2c muxes to switch to the i2c alias ports and the eeprom nodes to read the FRU contents on riser cards. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-4-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add I2C temperature sensor alias portsChanh Nguyen1-0/+8
Add the I2C alias ports to read temperature sensors via channels of the I2C muxes. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-3-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensorsChanh Nguyen2-0/+44
Define I2C alias ports from I2C Switch 0x70 at BMC I2C5. Add the tmp421 sensors via the I2C alias ports as OCP device temperature sensors. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-2-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: catalina: add Meta Catalina BMCPotin Lai2-0/+980
Add linux device tree entry for Meta(Facebook) Catalina compute-tray BMC using AT2600 SoC. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240805-potin-catalina-dts-v7-2-286bfd2ab93b@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add host0-ready pinYang Chen1-1/+1
Add host0-ready pin for phosphor-state-manager. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240711130501.2900301-2-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Add spi-gpioYang Chen1-0/+21
Add spi-gpio for TPM device. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-18-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add ltc4287 deviceYang Chen1-0/+6
Enable LTC4287 device on i2c-0. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240626130332.929534-17-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: remove unused power deviceYang Chen1-10/+0
Remove unused power device. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240626130332.929534-16-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Switch the i2c bus numberYang Chen1-2/+2
Switch the i2c bus number to map the i2c tag according to the hardware design. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-15-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: revise sgpio line nameYang Chen1-118/+118
Revise the SGPIO naming to mapping the SGPIO from the CPLD. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-14-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add power monitor xdp710Yang Chen1-0/+5
Add HSC xdp710 on i2c bus0. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-13-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add tmp75 sensorYang Chen1-0/+28
Add tmp75 sensor on the i2c bus connect to each fan board. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-12-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: enable ehci0 for USBYang Chen1-0/+4
Enable ehci0 for USB. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-11-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add linename of two pinsYang Chen1-2/+2
Add linename of two pins for power good/control. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-10-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Add adc sensors for fan boardYang Chen1-0/+144
Add ina238 support to read the sensors in front of fans. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-9-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Define the LEDs node nameYang Chen1-2/+26
Define the LEDs node name. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-8-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: remove unused bus and deviceYang Chen1-4/+0
Remove unused bus and device. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-7-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: enable mdio3Yang Chen1-4/+4
Change usage of I2C bus 11 to mdio3. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-6-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: change RTC referenceYang Chen1-4/+5
Change the RTC reference from on-chip to externel on i2c bus 9 and address is 0x51. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-5-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add eeprom on i2c busYang Chen1-0/+10
Add eeprom on the i2c-9 address 0x50 and i2c-15 address 0x56. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-4-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: change aliases for uartYang Chen1-1/+2
Change and add aliases name for uart interface. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-3-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: change the address of tmp75Yang Chen1-2/+2
Revise the address of tmp75 on I2C bus 1 from 0x48 to 0x4f due to design change. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-2-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-20ARM: dts: aspeed: System1: Updates to BMC boardNinad Palsule1-3/+3
- Changed temperature sensor monitor chip from tmp423 to tmp432 Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20240605160604.2135840-1-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-08-20ARM: dts: aspeed: convert ASRock SPC621D8HM3 NVMEM content to layout syntaxRafał Miłecki1-4/+8
Use cleaner (and non-deprecated) bindings syntax. See commit bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for details. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20240520063044.4885-1-zajec5@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-08-20ARM: dts: aspeed: Add IBM P11 Fuji BMC systemEddie James2-0/+3882
Add the device tree for the new BMC system. The Fuji is a P11 system with eight processors. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://lore.kernel.org/r/20240522192524.3286237-17-eajames@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-08-20ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC systemEddie James1-0/+21
The 4U Blueridge is identical to the Blueridge system but has two extra power supplies. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://lore.kernel.org/r/20240522192524.3286237-16-eajames@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-03 20:39:19 +0000