summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dce110
AgeCommit message (Collapse)AuthorFilesLines
2024-07-23drm/amd/display: Add P-State Keepout to dcn401 Global SyncDillon Varone3-0/+3
[WHY&HOW] OTG has new functionality to allow P-State relative to VStartup. Keepout region for this should be configured based on DML outputs same as other global sync params. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: use even ODM slice width for two pixels per containerWenjing Liu3-1/+22
[why] When optc uses two pixel per container, each ODM slice width must be an even number. [how] If ODM slice width is odd number increase it by 1. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-31kbuild: make -Woverride-init warnings more consistentArnd Bergmann1-1/+1
The -Woverride-init warn about code that may be intentional or not, but the inintentional ones tend to be real bugs, so there is a bit of disagreement on whether this warning option should be enabled by default and we have multiple settings in scripts/Makefile.extrawarn as well as individual subsystems. Older versions of clang only supported -Wno-initializer-overrides with the same meaning as gcc's -Woverride-init, though all supported versions now work with both. Because of this difference, an earlier cleanup of mine accidentally turned the clang warning off for W=1 builds and only left it on for W=2, while it's still enabled for gcc with W=1. There is also one driver that only turns the warning off for newer versions of gcc but not other compilers, and some but not all the Makefiles still use a cc-disable-warning conditional that is no longer needed with supported compilers here. Address all of the above by removing the special cases for clang and always turning the warning off unconditionally where it got in the way, using the syntax that is supported by both compilers. Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-11-17drm/amd/display: Refactor resource into component directoryMounika Adhuri3-1607/+2
[WHY] Move all resource files to unique folder resource. [HOW] Created resource folder in dc, moved the dcnxx_resource.c and dcnxx_resource.h files into corresponding new folders inside the resource and made appropriate changes for compilation in Makefiles. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-09drm/amd/display: Refactor HWSS into component folderMounika Adhuri4-3313/+2
[why] Rename hw_sequencer to hwseq. Move all hwseq files to unique folder hwss. [how] creating hwss repo in dc, and moved the dcnxx_hwseq.c and .h files into corresponding new folders inside the hwss and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: switch DC over to the new DRM logging macrosHamza Mahfooz1-2/+7
For multi-GPU systems it is difficult to tell which GPU a particular message is being printed for and that is undesirable because it complicates debugging efforts. Also, the new macros allow us to enable logging for particular parts of the codebase more selectively (since we no longer need to throw everything at DRM_DEBUG_KMS()). So, for the reasons outlined above we should switch to the new macros. We can accomplish this by using the existing DC_LOGGER code to pass around the relevant `struct drm_device` which will be fed to the new macros in logger_types.h. Also, we must get rid of all instances of the DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use the DC logger there and we can simply refer to the macros directly there instead. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: fix some style issuesAlex Deucher1-7/+6
Fixes a few style issues: - Only calculate the dto_params and dp_hpo_inst when dccg is present. - Fix indentation - Drop empty else block Fixes: 7f7925e25828 ("drm/amd/display: Fix MST recognizes connected displays as one") Cc: Muhammad Ahmed <ahmed.ahmed@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: Optimize OLED T7 delayAgustin Gutierrez1-1/+2
[Why] Driver doesn't need T7 delay for OLED panels, since it doesn't control power sequence. [How] This delay can be skipped to optimize resume times. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Swapnil Patel <swapnil.patel@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: Fix MST recognizes connected displays as oneMuhammad Ahmed1-13/+17
[What] MST now recognizes both connected displays Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amd/display: Don't check registers, if using AUX BL controlSwapnil Patel1-1/+3
[Why] Currently the driver looks DCN registers to access if BL is on or not. This check is not valid if we are using AUX based brightness control. This causes driver to not send out "backlight off" command during power off sequence as it already thinks it is off. [How] Only check DCN registers if we aren't using AUX based brightness control. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Swapnil Patel <swapnil.patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06drm/amd/display: remove useless check in should_enable_fbc()Dembskiy Igor1-3/+0
It does not make sense to compare a pointer to array element with NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 65d38262b3e8 ("drm/amd/display: fbc state could not reach while enable fbc") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Dembskiy Igor <dii@itb.spb.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Refactor edp power controlIan Chen1-1/+1
[Why & How] To organize the edp power control a bit: 1. add flag in dc_link to indicate dc to skip all implicit eDP power control. 2. add edp_set_panel_power link service for DM to call. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: implement pipe type definition and adding accessorsWenjing Liu1-1/+1
[why] There is a lack of encapsulation of pipe connection representation in pipe context. This has caused many challenging bugs and coding errors with repeated logic to identify the same pipe type. [how] Formally define pipe types and provide getters to identify a pipe type and find a pipe based on specific requirements. Update existing logic in non dcn specific files and dcn32 and future versions to use the new accessors. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Add Replay supported/enabled checksBhawanpreet Lakha1-0/+5
- Add checks for Cursor update and dirty rects (sending updates to dmub) - Add checks for dc_notify_vsync, and fbc and subvp Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Clean up errors in dce110_hw_sequencer.cRan Sun1-1/+1
Fix the following errors reported by checkpatch: ERROR: space required before the open brace '{' Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Clean up errors in dce110_timing_generator.cRan Sun1-2/+2
Fix the following errors reported by checkpatch: ERROR: spaces required around that '=' (ctx:WxV) Signed-off-by: Ran Sun <sunran001@208suo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: rename acquire_idle_pipe_for_layer to ↵Wenjing Liu1-1/+1
acquire_free_pipe_as_sec_dpp_pipe [why] Secondary DPP pipes are used for rendering secondary layers of planes. The name "for layer" doesn't make it obvious. The function is acquiring a free pipe as secondary dpp pipe only. We rename it so it is more obvious. In a future follow up change, we want to add functions to acquire free pipe as opp head pipe or otg master pipe as well. They will have their separate allocation priority. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: update add plane to context logic with a new algorithmWenjing Liu1-4/+6
[why] Preivous algorithm for finding an optimal idle pipe for a new plane was implemented to handle dynamic pipe allocation when MPO plane moves from one ODM slice to the other. Now pipe allocation is more static so it no longer depends on the MPO plane's position. We are simplifying our logic and remove unnecessary handling in our code. [how] Apply a new simplified version of pipe resource allocation logic to reduce unnecessary flip delay caused by swapping secondary dpp pipe to other MPC blending tree. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Don't show stack trace for missing eDPMario Limonciello1-1/+2
Some systems are only connected by HDMI or DP, so warning related to missing eDP is unnecessary. Downgrade to debug instead. Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Fixes: 6d9b6dceaa51 ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()") Reported-by: Mastan.Katragadda@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Fix typo in enable and disable symclk_seTaimur Hassan1-1/+3
[Why & How] Symclk should be based on link_enc_inst, and symclk_fe_sel should be based on stream_enc_inst. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Add symclk enable/disable during stream enable/disableTaimur Hassan1-1/+3
[Why & How] Using dig_stream_mapper, program symclk_en and symclk_fe_src_sel when enabling or disabling the corresponding stream. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Exit idle optimizations before attempt to access PHYLeo Chen1-0/+3
[Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add control flag to dc_stream_state to skip eDP BL off/link offMax Tseng1-1/+2
Add control flag to dc_stream_state to skip eDP BL off/link off. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Refactor fast update to use new HWSS build sequenceAlvin Lee1-0/+5
[Description] - Refactor HW sequencer to use a build / execute sequence - Also move gamma updates to become fast v2: squash in build fix ("drm/amd/display: Fix guarding of 'if (dc->debug.visual_confirm)'") Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: avoid calling missing .resync_fifo_dccg_dio()Arnd Bergmann1-0/+2
The .resync_fifo_dccg_dio() callback pointer was added in an #ifdef block, but is called unconditionally: drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2292:31: error: 'struct hwseq_private_funcs' has no member named 'resync_fifo_dccg_dio' Add the same #ifdef around the caller as well. Fixes: 3e8d74cb128f ("drm/amd/display: Trigger DIO FIFO resync on commit streams") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Clean FPGA code in dcQingqing Zhuo1-3/+0
[Why] Drop dead code for Linux. [How] Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Trigger DIO FIFO resync on commit streamsSaaem Rizvi1-0/+3
[WHY] Currently, there is an intermittent issue where a screen can either go blank or be corrupted. [HOW] To resolve the issue we trigger the ramping logic for DIO FIFO so that it goes back up to the correct speed. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Improvement for handling edp link training failsJingwen Zhu1-8/+11
[Why] The eDP retrain will cause the DPCD 300 to be reset to default. And cause the brightness can't be set correctly. [How] delete the call to edp panel power control in both enable_link_output/disable_link_output entirely and only call edp panel control in enable_link_dp and  disable_link_dp once. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: convert link.h functions to function pointer styleWenjing Liu1-30/+30
[Why & How] All dc subcomponents should call another dc component via function pointers stored in a component structure. This is part of dc coding convention since the beginning. The reason behind this is to improve encapsulation and polymorphism. The function contract is extracted into a single link service structure defined in link.h header file and implemented only in link_factory.c instead of spreading across multiple files in link component file structure. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amd/display: remove legacy fields of dc_plane_cap structDavid Tadokoro1-3/+0
The fields blends_with_above and blends_with_below of struct dc_plane_cap (defined in dc/dc.h) are boolean and set to true by default. All instances of a dc_plane_cap maintain the default values of both. Also, there is only one if statement that checks those fields and there would be the same effect if it was deleted (assuming that those fields are always going to be true). For this reason, considering both fields as legacy ones, this commit removes them and the aforementioned if statement. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: David Tadokoro <davidbtadokoro@usp.br> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: move dc_link functions in protocols folder to dc_link_exportsWenjing Liu1-2/+0
[why] link component should only have one interface serving dc. [how] We are moving dc_link functions exposed to DM to dc_link_exports and unify link component interface in link.h with function pointer to match the style of other dc component. This is the third step to move dc_link functions under protocols folder to dc_link_exports. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-28drm/amd/display: merge dc_link.h into dc.h and dc_types.hWenjing Liu1-1/+1
[why] Remove the need to include dc_link.h separately. dc.h should contain everything needed on DM side. [How] Merge dc_link.h into dc.h and dc_types.h so DM only needs to include dc.h to use all link public functions. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-23drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()Hamza Mahfooz1-4/+2
Since, hot plugging eDP displays isn't supported, it is sufficient for us to warn about the lack of a connected display once. So, use ASSERT() in dce110_edp_wait_for_hpd_ready() instead of DC_LOG_WARNING(). Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08drm/amd/display: break down dc_link.cWenjing Liu1-6/+6
[why] dc_link contains over 30k line of code, the decision is to break it down to files residing in link folder based on functionality. This change is the last break down change which will remove dc_link.c file after everything is broken down. [how] Move remaining dc_link.c functions into link_detection, link_dpms, link_validation, link_resource, and link_fpga and remove dc_link. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: merge dc_link_dp into dc_linkWenjing Liu1-1/+0
[why] Temporarly merge dc_link_dp functions into dc_link for the purpose of removing dc_link_dp files. This is a transitional change for later commits where we will further refactor dc_link file. Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: Enable AdaptiveSync in DC interfaceSung Joon Kim1-1/+7
[why] Start enabling AdaptiveSync feature on Linux environment. [how] Adding AdaptiveSync support in DC layer - building AdaptiveSync info_packets - adjusting the v_startup parameter Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: move eDP panel control logic to link_edp_panel_controlWenjing Liu1-4/+4
Create new file link_edp_panel_control.c and link_edp_panel_control.h, and move eDP panel control logic into them. Reviewed-by: George Shen <George.Shen@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: create accessories, hwss and protocols sub folders in linkWenjing Liu1-11/+10
[why] link component contains three sub folders: accessories - utilities for improving testability, logging or tracing, doesn't impact end user use cases. protocols - specs defined protocols used in end user use cases hwss - hwss owned link_hwss object, served as an abstraction layer in hwss to access various types of encoder/phy/dpia endpoints in a unified interface. sooner we will have files directly under link folder one for the implementation of each major link behavior such as link_create, link_detect, link_validate and link_set_dpms. Reviewed-by: George Shen <George.Shen@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Skip backlight control delay on external powered linksTony Tascioglu1-3/+6
[Why] When an eDP panel is powered externally from a different GPU, we can avoid waiting for hardware sequencing delays when switching the backlight on/off as the display backlight is no longer powered by the original source. [How] This commit extends the 'link_powered_externally' variable to allow bypassing hardware delays for additional backlight commands and force the backlight on/off when a link is powered by another GPU. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tony Tascioglu <tony.tascioglu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Optimize link power-down when link powered externallyTony Tascioglu1-6/+8
[Why] When an eDP panel is powered externally by a different GPU, we don't need to wait for hardware sequencing delays when powering down a link, as the display is not dependent on the GPU being powered down. [How] This commit adds a variable 'link_powered_externally' to indicate when a link is being powered by another GPU. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tony Tascioglu <tony.tascioglu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: move dp capability related logic to link_dp_capabilityWenjing Liu1-9/+9
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: move dp phy related logic to link_dp_phyWenjing Liu1-1/+1
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: move dpcd logic from dc_link_dpcd to link_dpcdWenjing Liu1-1/+0
[why] Moving dpcd logic from dc_link_dpcd to link_dpcd as part of link file restructure Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: refactor hpd logic from dc_link to link_hpdWenjing Liu1-1/+2
[why] Factor out hpd handling logic from generic dc link file. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-03drm/amd/display: move dccg programming from link hwss hpo dp to hwssWenjing Liu1-0/+13
[why] dccg clock programming shouldn't be part of link hwss programming sequence. The scope of link hwss is limited to encoder and phy programming. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Check if PSR enabled when entering MALLAlvin Lee1-2/+7
[Description] - When attempting to enter MALL SS when a PSR panel is connected, we have to check that the PSR panel has already entered PSR because the vsync interrupt call is per display index (can be called for the non-PSR panel first) - Also don't override link settings when programming phantom stream (main and phantom pipe share the same link) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: move stream encoder audio setup to link_hwssWenjing Liu1-17/+5
Unify stream encoder audio setup interface. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: refactor enable/disable audio stream hw sequenceWenjing Liu1-41/+9
[why] 1. As recommended by hardware team, don't enable APG when stream is not enabled. 2. Move audio stream encoder programming into link_hwss. [how] 1. Merge dp_audio_enable into enable audio stream hw sequence. 2. Move stream encoder programming into link hwss level to unify stream encoder programming interface. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Fix audio on display after unplugging anotherAric Cyr1-4/+2
Revert "dc: skip audio setup when audio stream is enabled" This reverts commit 65fbfb02c2734cacffec5e3f492e1b4f1dabcf98 [why] We have minimal pipe split transition method to avoid pipe allocation outage.However, this method will invoke audio setup which cause audio output stuck once pipe reallocate. [how] skip audio setup for pipelines which audio stream has been enabled Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: solve regression in update phy state refactorWenjing Liu1-2/+4
[Why] There is a coding error when moving dp disable link phy to hw sequencer, where the receiver power control is missed during this refactor. [how] 1. Add back missing receiver power control in disable link phy. 2. minor modifications to ensure there is no undesired sequence changes in dp link enable/disable. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-12 20:38:47 +0000