summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h
AgeCommit message (Collapse)AuthorFilesLines
2023-10-09drm/amd/display: Refactor HWSS into component folderMounika Adhuri1-186/+0
[why] Rename hw_sequencer to hwseq. Move all hwseq files to unique folder hwss. [how] creating hwss repo in dc, and moved the dcnxx_hwseq.c and .h files into corresponding new folders inside the hwss and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Update DCN20 for DCN35 supportQingqing Zhuo1-0/+2
[Why & How] Update DCN20 files for DCN35 usage. Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: fix odm k2 div calculationDmytro Laktyushkin1-1/+1
Correct setting is div by 2 for odm. Seamless odm transitions are enabled with enable_dp_dig_pixel_rate_div_policy debug flag. Fixes: a2c7356f526d ("drm/amd/display: fix pixel rate update sequence") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: fix pixel rate update sequenceDmytro Laktyushkin1-1/+1
The k1/k2 pixel rate dividers in dccg should only be updated on stream enable and do not actually depend on whether odm combine is active. This removes an on flip update of these and fixes the calculate function to ignore odm status for dp steams. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Trigger DIO FIFO resync on commit streamsSaaem Rizvi1-0/+2
[WHY] Currently, there is an intermittent issue where a screen can either go blank or be corrupted. [HOW] To resolve the issue we trigger the ramping logic for DIO FIFO so that it goes back up to the correct speed. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Use per pipe P-State force for FPOAlvin Lee1-1/+1
[Description] * Pass in pipe index for FPO cmd to DMCUB - This change will pass in the pipe index for each stream that is using FPO - This change is in preparation to enable FPO + VActive * Use per pipe P-State force for FPO - For FPO, instead of using max watermarks value for P-State disallow, use per pipe p-state force instead - This is in preparation to enable FPO + VActive Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Fix 4to1 MPC black screen with DPP RCONicholas Kazlauskas1-0/+4
[Why] DPP Root clock optimization when combined with 4to1 MPC combine results in the screen turning black. This is because the DPPCLK is stopped during the middle of an optimize_bandwidth sequence during commit_minimal_transition without going through plane power down/power up. [How] The intent of a 0Hz DPP clock through update_clocks is to disable the DTO. This differs from the behavior of stopping the DPPCLK entirely (utilizing a 0Hz clock on some ASIC) so it's better to move this logic to reside next to plane power up/power down where we gate the HUBP/DPP DOMAIN. The new sequence should be: Power down: PG enabled -> RCO on Power up: RCO off -> PG disabled Rename power_on_plane to power_on_plane_resources to reflect the actual operation that's occurring. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/display: Rename DCN config to FPHarry Wentland1-1/+1
[Why & How] The only reason we have the DCN config is for floating point support. Rename it to make that clear and (hopefully) avoid misuse of the config in the future. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Fix various dynamic ODM transitions on DCN32Dillon Varone1-0/+2
[Why&How] Several transitions were fixed that will allow Dynamic ODM and MPO transitions to be supported on DCN32. 1) Due to resource limitations, in certain scenarios that require an MPO plane to be split, the features cannot be combined with the current policy. This is due to unsafe transitions being required (OPP instance per MPCC being switched on active pipe is not supported by DCN), to support the split plane with ODM active as it moves across the viewport. Dynamic ODM will now be disabled when MPO is required. 2) When exiting MPO and re-entering ODM, DC assigns an inactive pipe for the next ODM pipe, which under previous power gating policy would result in programming a gated DSC HW block. New policy dynamically gates/un-gates DSC blocks when Dynamic ODM is active to support transitions on DCN32 only. 3) Entry and exit from 3 plane MPO and Dynamic ODM requires a minimal transition so that all pipes which require their MPCC OPP instance to be changed have a full frame to be disabled before reprogramming. To solve this, the Dynamic ODM policy now utilizes minimal state transitions when entering or exiting 3 plane scenarios. 4) Various fixes to DCN32 pipe merge/split algorithm to support Dynamic ODM and MPO transitions. In summary, this commit fixes various transitions to support ODM->MPO and MPO->ODM. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Apply ODM 2:1 policy for single display configurationSamson Tam1-0/+1
[Why] Most of the time, a single display uses the ODM combine. When using multi-display, we use ODM combine only if it is necessary. These cases are not flexible enough for us, and we can improve them to take advantage of our hardware. We want to have more control over the ODM policy. [How] This commit add a new debug flag named enable_single_display_2to1_odm_policy to control the ODM policy and another flag named enable_dp_dig_pixel_rate_div_policy to fine control the ODM combine. This is possible by adding a new "pipe.dest" parameter that can be set to ODM 2:1 combined if we use a single display. For dynamic ODM combine, when using DP-DIG, DCN applies K2=2 settings for ODM combine. Note that this feature affects the following registers: - timing.pix_clk_100khz -> DP_VID_M, DP_VID_N - requested_pix_clk_100hz -> DP_DTOn_PHASE - OTGn_PIXEL_RATE_DIVK2 - DP_PIXEL_PER_CYCLE_PROCESSING_MODE - DIG_FIFO_OUTPUT_PIXEL_MODE - DP_VID_N_MUL Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add function to set pixels per cycleEric Bernstein1-0/+1
Add function to set pixels per cycle in DIG stream encoder Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amd/display: Firmware assisted MCLK switch and FSFelipe Clark1-0/+1
[WHY] Memory clock switching has great potential for power savings. [HOW] The driver code was modified to notify the DMCUB firmware that it should stretch the vertical blank of frames when a memory clock switch is about to start so that no blackouts happen on the screen due to unavailability of the frame buffer. The driver logic to determine when such firmware assisted strategy can be initiated is also implemented and consists on checking prerequisites of the feature. Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Felipe Clark <felipe.clark@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add new pixel rate programmingJun Lei1-0/+3
[why] New dividers in DCCG need to be programmed depending on encoder/stream type since pixels per clock in OTG/DIO is different DIO also needs additional programming depending on pixels per clock Signed-off-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
2022-06-03drm/amd/display: Add dependant changes for DCN32/321Aurabindo Pillai1-0/+5
[Why&How] This patch adds necessary changes needed in DC files outside DCN32/321 specific tree v2: squash in updates (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amdgpu/display: Prepare for new interfacesLeung, Martin1-0/+2
why: lut pipeline will be hooked up differently in some asics need to add new interfaces how: add them Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin <martin.leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Wait for hubp read line for PollockBecle Lee1-0/+1
[Why] Underflow occurred while hubp ret pipe read is idle and the second pipe is powered up and added. Flickering and underflow are only observed on Pollock. [How] Check the hubp ret pipe read prior to unlock pipes. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Becle Lee <becle.lee@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Drop DCN for DP2.x logicWenjing Liu1-2/+0
[Why & How] DCN guard is not necessary for DP2.x relevant logic. Drop them. v2: squash in fix for misplaced #endif (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-03drm/amd/display: Added HPO HW control shutdown supportJake Wang1-0/+1
[Why] HPO is only used for DP2.0. HPO HW control should be disable when not being used to save power. [How] Shutdown HPO HW control during init hw. Shutdown HPO HW control during stream disable. Enable HPO HW control during stream enable if DP2.0. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amd/display: add cyan_skillfish display supportZhan Liu1-0/+4
[Why] add display related cyan_skillfish files in. makefile controlled by CONFIG_DRM_AMD_DC_DCN201 flag. v2: squash in clang fixes from Harry, Nathan v3: squash in missing CONFIG_DRM_AMD_DC check (Alex) Signed-off-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Jun Lei <jun.lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 SST DC SupportFangzhi Zuo1-0/+3
1. Retrieve 128/132b link cap. 2. 128/132b link training and payload allocation. 3. UHBR10 link rate support. [squash in warning fixes - Alex] Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/display: refactor riommu invalidation waEric Yang1-1/+0
[Why] A cleaner solution, only done once on boot. [How] Remove previous workaround and configure an extra vmid one time on boot Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: implement workaround for riommu related hangEric Yang1-0/+1
[Why] During S4/S5/reboot, sometimes riommu invalidation request arrive too early, DCN may be unable to respond to the invalidation request resulting in pstate hang. [How] VBIOS will force allow pstate for riommu invalidation and driver will clear it after powering down display pipes. Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Refactor visual confirmWyatt Wood1-5/+0
[Why + How] Visual confirm has no asic-specific logic, so we can refactor and unify these functions that are currently spread out across multiple dcn files. Add a new hw sequencer interface update_visual_confirm_color, and a new mpc function pointer set_bg_color. This will allow visual confirm to updated independently of MPCC blending updates. v2: squash in DCN3.1 fixes Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: move panel power seq to new panel structAnthony Koo1-2/+0
[Why] panel power sequencer is currently just sitting in hwseq but it really it tied to internal panels [How] make a new panel struct to contain power sequencer code Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-19drm/amd/display: workaround for HDMI hotplug in DPMSOFF stateYongqiang Sun1-0/+2
[Why] When hotplug a HDMI monitor during entering S0i3 or DPMSOFF state due to entering infinite loop when calling vbios to program pixel clocks. In this scenario, pll is enabled but phy is not, and there is not a programing guide for this case. [How] Before we having the proper programing guide, before disable pll, doing a phy enable and disable to avoid the issue. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Temporarily disable stutter on MPO transitionGeorge Shen1-0/+3
[Why] Underflow sometimes occurs during transition into MPO with stutter enabled. [How] When transitioning into MPO, disable stutter. Re-enable stutter within one frame. Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Add function pointers for panel related hw functionsAnthony Koo1-0/+2
[Why] Make panel backlight and power on/off functions into hardware specific function pointers [How] Add function pointers for panel related hw functions - is_panel_powered_on - is_panel_backlight_on Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: make PSR static screen entry within 30 msAnthony Koo1-1/+1
[Why] With different refresh rate panels, the PSR entry/exit time is different since it is dependent on 2 frame entry time today [How] Make static screen num frame entry time to be calculated such that entry time is within 30 ms instead of fixed num frames. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-05drm/amd/display: add separate of private hwss functionsAnthony Koo1-0/+156
[Why] Some function pointers in the hwss function pointer table are meant to be hw sequencer entry points to be called from dc. However some of those function pointers are not meant to be entry points, but instead used as a code reuse/inheritance tool called directly by other hwss functions, not by dc. Therefore, we want a more clear separation of which functions we determine to be interface functions vs the functions we use within hwss. [How] DC interface functions will be stored in: struct hw_sequencer_funcs Functions used within HWSS will be stored in: struct hwseq_private_funcs Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-05-16 22:38:04 +0000