| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
virtio:
- Define DRM capset
Cross-subsystem Changes:
dma-buf:
- heaps: Clean up documentation
printk:
- Pass description to kmsg_dump()
Core Changes:
CI:
- Update IGT tests
- Point upstream repo to GitLab instance
modesetting:
- Introduce Power Saving Policy property for connectors
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
panic:
- Avoid build-time interference with framebuffer console
docs:
- Document Colorspace property
scheduler:
- Remove full_recover from drm_sched_start
TTM:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
Driver Changes:
amdgpu:
- Support Power Saving Policy connector property
ast:
- astdp: Support AST2600 with VGA; Clean up HPD
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
gma500:
- Update i2c terminology
ivpu:
- Add MODULE_FIRMWARE()
lcdif:
- Fix pixel clock
loongson:
- Use GEM refcount over TTM's
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
panel:
- Shutdown fixes plus documentation
- Refactor several drivers for better code sharing
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing
sti:
- Fix module owner
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt
tegra:
- Call drm_atomic_helper_shutdown()
v3d:
- Clean up perfmon
vkms:
- Clean up
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box
|
|
Limiting the allocation of higher order pages to the closest NUMA node
and enabling direct memory reclaim provides not only failsafe against
situations when memory becomes too much fragmented and the allocator is
not able to satisfy the request from the local node but falls back to
remote pages (HUGEPAGE) but also offers performance improvement.
Accessing remote pages suffers due to bandwidth limitations and could be
avoided if memory becomes defragmented and in most cases without using
manual compaction. (/proc/sys/vm/compact_memory)
Note: On certain distros such as RHEL, the proactive compaction is
disabled. (https://tinyurl.com/4f32f7rs)
v2 (chk): drop __GFP_RECLAIM since that is already set by GFP_USER
Cc: Dave Airlie <airlied@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708160636.1147308-1-rajneesh.bhardwaj@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
|
|
Use the LRU walker for eviction. This helps
removing a lot of code with weird locking
semantics.
The functionality is slightly changed so that
when trylocked buffer objects are exhausted, we
continue to interleave walks with ticket-locks while
there is still progress made. The list walks are
not restarted in-between evictions.
Also provide a separate ttm_bo_evict_first()
function for its single user. The context of that
user allows sleeping dma_resv locks.
v6:
- Various cleanups suggested by Matthew Brost.
- Fix error return code of ttm_bo_evict_first(). (Matthew Brost)
- Fix an error check that was inverted. (Matthew Brost)
v7:
- Use s64 rather than long (Christian König)
- Early ttm_resource_cursor_fini() in ttm_bo_evict_first().
- Simplify check for bo_moved in ttm_bo_evict_first().
(Christian König)
- Don't evict pinned bos.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-8-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Rework the TTM swapping to use the LRU walker helper.
This helps fixing up the ttm_bo_swapout() interface
to be consistent about not requiring any locking.
For now mimic the current behaviour of using trylock
only. We could be using ticket-locks here but defer
that until it's deemed necessary. The TTM swapout
functionality is a bit weird anyway since it
alternates between memory types without exhausting
TTM_PL_SYSTEM first.
Intentionally keep pages as the unit of progress since
changing that to bytes is an unrelated change that can
be done later.
v6:
- Improve on error code translation in the swapout callback
(Matthew Brost).
v7:
- Use s64 rather than long.
- Remove ttm_resource_cursor_fini() since it's no longer used.
- Rename ttm_resource_cursor_fini_locked() to
ttm_resource_cursor_fini().
- Don't swap out pinned bos.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-7-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Provide a generic LRU walker in TTM, in the spirit of drm_gem_lru_scan()
but building on the restartable TTM LRU functionality.
The LRU walker optionally supports locking objects as part of
a ww mutex locking transaction, to mimic to some extent the
current functionality in ttm. However any -EDEADLK return
is converted to -ENOSPC and then to -ENOMEM before reaching
the driver, so that the driver will need to backoff and possibly retry
without being able to keep the ticket.
v3:
- Move the helper to core ttm.
- Remove the drm_exec usage from it for now, it will be
reintroduced later in the series.
v4:
- Handle the -EALREADY case if ticketlocking.
v6:
- Some cleanup and added code comments (Matthew Brost)
- Clarified the ticketlock in the commit message (Matthew Brost)
v7:
- Use s64 rather than long for the target and progress
(Christian König)
- Update documentation to not encourage using pages as a
progress measure. (Christian König)
- Remove cond_resched(). (Christian König)
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-6-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
To address the problem with hitches moving when bulk move
sublists are lru-bumped, register the list cursors with the
ttm_lru_bulk_move structure when traversing its list, and
when lru-bumping the list, move the cursor hitch to the tail.
This also means it's mandatory for drivers to call
ttm_lru_bulk_move_init() and ttm_lru_bulk_move_fini() when
initializing and finalizing the bulk move structure, so add
those calls to the amdgpu- and xe driver.
Compared to v1 this is slightly more code but less fragile
and hopefully easier to understand.
Changes in previous series:
- Completely rework the functionality
- Avoid a NULL pointer dereference assigning manager->mem_type
- Remove some leftover code causing build problems
v2:
- For hitch bulk tail moves, store the mem_type in the cursor
instead of with the manager.
v3:
- Remove leftover mem_type member from change in v2.
v6:
- Add some lockdep asserts (Matthew Brost)
- Avoid NULL pointer dereference (Matthew Brost)
- No need to check bo->resource before dereferencing
bo->bulk_move (Matthew Brost)
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Have iterators insert themselves into the list they are iterating
over using hitch list nodes. Since only the iterator owner
can remove these list nodes from the list, it's safe to unlock
the list and when continuing, use them as a starting point. Due to
the way LRU bumping works in TTM, newly added items will not be
missed, and bumped items will be iterated over a second time before
reaching the end of the list.
The exception is list with bulk move sublists. When bumping a
sublist, a hitch that is part of that sublist will also be moved
and we might miss items if restarting from it. This will be
addressed in a later patch.
Changes in previous series:
- Updated ttm_resource_cursor_fini() documentation.
v2:
- Don't reorder ttm_resource_manager_first() and _next().
(Christian König).
- Use list_add instead of list_move
(Christian König)
v3:
- Split into two patches, one cleanup, one new functionality
(Christian König)
- use ttm_resource_cursor_fini_locked() instead of open-coding
(Matthew Brost)
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-4-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
To make the transition to using lru hitches easier,
simplify the ttm_resource_manager_next() interface to only take
the cursor and reuse ttm_resource_manager_next() functionality
from ttm_resource_manager_first().
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-3-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
To be able to handle list unlocking while traversing the LRU
list, we want the iterators not only to point to the next
position of the list traversal, but to insert themselves as
list nodes at that point to work around the fact that the
next node might otherwise disappear from the list while
the iterator is pointing to it.
These list nodes need to be easily distinguishable from other
list nodes so that others traversing the list can skip
over them.
So declare a struct ttm_lru_item, with a struct list_head member
and a type enum. This will slightly increase the size of a
struct ttm_resource.
Changes in previous series:
- Update enum ttm_lru_item_type documentation.
v3:
- Introduce ttm_lru_first_res_or_null()
(Christian König, Thomas Hellström)
v5:
- Update also the TTM test code (Xe CI).
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Bos can be put with multiple unrelated dma-resv locks held. But
imported bos attempt to grab the bo dma-resv during dma-buf detach
that typically happens during cleanup. That leads to lockde splats
similar to the below and a potential ABBA deadlock.
Fix this by always taking the delayed workqueue cleanup path for
imported bos.
Requesting stable fixes from when the Xe driver was introduced,
since its usage of drm_exec and wide vm dma_resvs appear to be
the first reliable trigger of this.
[22982.116427] ============================================
[22982.116428] WARNING: possible recursive locking detected
[22982.116429] 6.10.0-rc2+ #10 Tainted: G U W
[22982.116430] --------------------------------------------
[22982.116430] glxgears:sh0/5785 is trying to acquire lock:
[22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0
[22982.116438]
but task is already holding lock:
[22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec]
[22982.116442]
other info that might help us debug this:
[22982.116442] Possible unsafe locking scenario:
[22982.116443] CPU0
[22982.116444] ----
[22982.116444] lock(reservation_ww_class_mutex);
[22982.116445] lock(reservation_ww_class_mutex);
[22982.116447]
*** DEADLOCK ***
[22982.116447] May be due to missing lock nesting notation
[22982.116448] 5 locks held by glxgears:sh0/5785:
[22982.116449] #0: ffff8c2d9aba58c8 (&xef->vm.lock){+.+.}-{3:3}, at: xe_file_close+0xde/0x1c0 [xe]
[22982.116507] #1: ffff8c2e28cc8480 (&vm->lock){++++}-{3:3}, at: xe_vm_close_and_put+0x161/0x9b0 [xe]
[22982.116578] #2: ffff8c2e31982970 (&val->lock){.+.+}-{3:3}, at: xe_validation_ctx_init+0x6d/0x70 [xe]
[22982.116647] #3: ffffacdc469478a8 (reservation_ww_class_acquire){+.+.}-{0:0}, at: xe_vma_destroy_unlocked+0x7f/0xe0 [xe]
[22982.116716] #4: ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec]
[22982.116719]
stack backtrace:
[22982.116720] CPU: 8 PID: 5785 Comm: glxgears:sh0 Tainted: G U W 6.10.0-rc2+ #10
[22982.116721] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[22982.116723] Call Trace:
[22982.116724] <TASK>
[22982.116725] dump_stack_lvl+0x77/0xb0
[22982.116727] __lock_acquire+0x1232/0x2160
[22982.116730] lock_acquire+0xcb/0x2d0
[22982.116732] ? dma_buf_detach+0x3b/0xf0
[22982.116734] ? __lock_acquire+0x417/0x2160
[22982.116736] __ww_mutex_lock.constprop.0+0xd0/0x13b0
[22982.116738] ? dma_buf_detach+0x3b/0xf0
[22982.116741] ? dma_buf_detach+0x3b/0xf0
[22982.116743] ? ww_mutex_lock+0x2b/0x90
[22982.116745] ww_mutex_lock+0x2b/0x90
[22982.116747] dma_buf_detach+0x3b/0xf0
[22982.116749] drm_prime_gem_destroy+0x2f/0x40 [drm]
[22982.116775] xe_ttm_bo_destroy+0x32/0x220 [xe]
[22982.116818] ? __mutex_unlock_slowpath+0x3a/0x290
[22982.116821] drm_exec_unlock_all+0xa1/0xd0 [drm_exec]
[22982.116823] drm_exec_fini+0x12/0xb0 [drm_exec]
[22982.116824] xe_validation_ctx_fini+0x15/0x40 [xe]
[22982.116892] xe_vma_destroy_unlocked+0xb1/0xe0 [xe]
[22982.116959] xe_vm_close_and_put+0x41a/0x9b0 [xe]
[22982.117025] ? xa_find+0xe3/0x1e0
[22982.117028] xe_file_close+0x10a/0x1c0 [xe]
[22982.117074] drm_file_free+0x22a/0x280 [drm]
[22982.117099] drm_release_noglobal+0x22/0x70 [drm]
[22982.117119] __fput+0xf1/0x2d0
[22982.117122] task_work_run+0x59/0x90
[22982.117125] do_exit+0x330/0xb40
[22982.117127] do_group_exit+0x36/0xa0
[22982.117129] get_signal+0xbd2/0xbe0
[22982.117131] arch_do_signal_or_restart+0x3e/0x240
[22982.117134] syscall_exit_to_user_mode+0x1e7/0x290
[22982.117137] do_syscall_64+0xa1/0x180
[22982.117139] ? lock_acquire+0xcb/0x2d0
[22982.117140] ? __set_task_comm+0x28/0x1e0
[22982.117141] ? find_held_lock+0x2b/0x80
[22982.117144] ? __set_task_comm+0xe1/0x1e0
[22982.117145] ? lock_release+0xca/0x290
[22982.117147] ? __do_sys_prctl+0x245/0xab0
[22982.117149] ? lockdep_hardirqs_on_prepare+0xde/0x190
[22982.117150] ? syscall_exit_to_user_mode+0xb0/0x290
[22982.117152] ? do_syscall_64+0xa1/0x180
[22982.117154] ? __lock_acquire+0x417/0x2160
[22982.117155] ? reacquire_held_locks+0xd1/0x1f0
[22982.117156] ? do_user_addr_fault+0x30c/0x790
[22982.117158] ? lock_acquire+0xcb/0x2d0
[22982.117160] ? find_held_lock+0x2b/0x80
[22982.117162] ? do_user_addr_fault+0x357/0x790
[22982.117163] ? lock_release+0xca/0x290
[22982.117164] ? do_user_addr_fault+0x361/0x790
[22982.117166] ? trace_hardirqs_off+0x4b/0xc0
[22982.117168] ? clear_bhb_loop+0x45/0xa0
[22982.117170] ? clear_bhb_loop+0x45/0xa0
[22982.117172] ? clear_bhb_loop+0x45/0xa0
[22982.117174] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[22982.117176] RIP: 0033:0x7f943d267169
[22982.117192] Code: Unable to access opcode bytes at 0x7f943d26713f.
[22982.117193] RSP: 002b:00007f9430bffc80 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
[22982.117195] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f943d267169
[22982.117196] RDX: 0000000000000000 RSI: 0000000000000189 RDI: 00005622f89579d0
[22982.117197] RBP: 00007f9430bffcb0 R08: 0000000000000000 R09: 00000000ffffffff
[22982.117198] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[22982.117199] R13: 0000000000000000 R14: 0000000000000000 R15: 00005622f89579d0
[22982.117202] </TASK>
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628153848.4989-1-thomas.hellstrom@linux.intel.com
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_device_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_pool_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_resource_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_tt_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_bo_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_bo_validate_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_mock_manager.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/ttm/tests/ttm_kunit_helpers.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624-md-drivers-gpu-drm-ttm-tests-v2-1-76bb765e19c9@quicinc.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Update the tests and helpers to use unsigned kernel types.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b36d71de78990ac5be1538cc3f735f7e40618cfe.1718192625.git.karolina.stolarek@intel.com
|
|
The test files are GPL and MIT, so update the definitions accordingly.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/54cd7289db67ec396b67ef48dbb45521d56ec03c.1718192625.git.karolina.stolarek@intel.com
|
|
List improvements for the test suite with some notes.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3856fbbeaf40078d59b45971002b8f9d0d85f8f0.1718192625.git.karolina.stolarek@intel.com
|
|
Add tests for functions that add and release pages to TTs. Test the
swapin operation. Export ttm_tt_unpopulate, ttm_tt_swapin and
ttm_tt_swapout symbols for testing purposes.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Somalapuram, Amaranath <asomalap@amd.com>
Tested-by: Somalapuram, Amaranath <asomalap@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee42d83a472ba6bca22b4bce58f332f800891186.1718192625.git.karolina.stolarek@intel.com
|
|
Add tests for ttm_bo_validate that focus on BO eviction and swapout.
Update device funcs definition with eviction-related callbacks. Add
alternative funcs where evict_flags() routes eviction to a domain
that can't allocate resources (dubbed "busy manager" in the tests).
Extract the common path of ttm_device init into a function.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Somalapuram, Amaranath <asomalap@amd.com>
Tested-by: Somalapuram, Amaranath <asomalap@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ae8e284d6c7e6bd0be259052bd4f42e07ce24641.1718192625.git.karolina.stolarek@intel.com
|
|
Add test cases that check how the state of dma fences in BO's
reservation object influence the ttm_bo_validation() flow. Do similar
tests for resource manager's move fence.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Somalapuram, Amaranath <asomalap@amd.com>
Tested-by: Somalapuram, Amaranath <asomalap@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/068791a27abd05bf2605f23cc31864a22c20b308.1718192625.git.karolina.stolarek@intel.com
|
|
Add mock resource manager to test ttm_bo_validate() with non-system
placements. Update KConfig entry to enable DRM Buddy allocator, used
by the mock manager. Update move function to do more than just assign
a resource.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Tested-by: Somalapuram, Amaranath <asomalap@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/664791dbb7cbada29e705d2fcaf176023f1b8649.1718192625.git.karolina.stolarek@intel.com
|
|
Add tests for ttm_bo_init_reserved() and ttm_bo_validate() that use
sys manager. Define a simple move function in ttm_device_funcs. Expose
destroy callback of the buffer object to make testing of
ttm_bo_init_reserved() behaviour easier.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Somalapuram, Amaranath <asomalap@amd.com>
Tested-by: Somalapuram, Amaranath <asomalap@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffba0d62eb98b2cbc61ae7ca90fee7dc0855719c.1718192625.git.karolina.stolarek@intel.com
|
|
Add a new helper function that also initializes the device. Use it in
ttm_tt test suite and delete the local definition.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Somalapuram, Amaranath <asomalap@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/235f110c1bdd2da7fac62ec03d177a5160dba1d5.1718192625.git.karolina.stolarek@intel.com
|
|
In commit d393acce7b3f ("drm/tests: Switch to kunit devices"),
DRM test helpers migrated away from using a dummy platform driver
in favour of KUnit device. This means that DMA masks for the device
are not set but are required by ttm_pool_alloc tests.
Set the DMA mask for coherent mappings to unblock testing.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dbd83b01bc835d922c070ad1c5bd9023e631e6c4.1718192625.git.karolina.stolarek@intel.com
|
|
DRM KUnit helpers are selected automatically when TTM tests are enabled,
so there's no need to do it directly in the .kunitconfig file.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1f6f03ac5c6ba7d4b021c2a31638a0ae086486e8.1718192625.git.karolina.stolarek@intel.com
|
|
BOs in a bulk move have to share the same reservation object. That is
not the case in the ttm_bo_unreserve_bulk subtest. Update
ttm_bo_kunit_init() helper to accept dma_resv object so we can define
buffer objects that share the same resv. Update calls to that helper
accordingly.
Fixes: 995279d280d1 ("drm/ttm/tests: Add tests for ttm_bo functions")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c5bd2df114781b4eb5c1e8295b2ae4ac2c30a179.1718192625.git.karolina.stolarek@intel.com
|
|
PREEMPT_RT has a different locking implementation for ww_mutex. The
base mutex of struct ww_mutex is declared as struct WW_MUTEX_BASE. The
latter is defined as `mutex' for non-PREEMPT_RT builds and `rt_mutex'
for PREEMPT_RT builds.
Using mutex_lock() directly on the base mutex in
ttm_bo_reserve_deadlock() leads to compile error on PREEMPT_RT.
The locking-selftest has its own defines to deal with this and it is
probably best to defines the needed one within the test program since
their usefulness is limited outside of well known selftests.
Provide ww_mutex_base_lock() which points to the correct function for
PREEMPT_RT and non-PREEMPT_RT builds.
Fixes: 995279d280d1e ("drm/ttm/tests: Add tests for ttm_bo functions")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619144630.4DliKOmr@linutronix.de
|
|
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
|
|
Stop printing the TT memory decryption status info each time tt is created
and instead print it just once.
Reduces the spam in the system logs when running guests with SEV enabled.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 71ce046327cf ("drm/ttm: Make sure the mapped tt pages are decrypted when needed")
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20240408155605.1398631-1-zack.rusin@broadcom.com
|
|
Surprisingly many places depend on debugfs.h to be included via
drm_print.h. Fix them.
v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe
v2: Also fix ivpu and vmwgfx
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Linux 6.9-rc5
I've had a persistent msm failure on clang, and the fix is in fixes
so just pull it back to fix that.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
We only pool write combined and uncached allocations because they
require extra overhead on allocation and release.
If we also pool cached NUMA it not only means some extra unnecessary
overhead, but also that under memory pressure it can happen that
pages from the wrong NUMA node enters the pool and are re-used
over and over again.
This can lead to performance reduction after running into memory
pressure.
v2: restructure and cleanup the code a bit from the internal hack to
test this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 4482d3c94d7f ("drm/ttm: add NUMA node id to the pool")
CC: stable@vger.kernel.org
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415134821.1919-1-christian.koenig@amd.com
|
|
remove the unsed the paramter in the function
ttm_bo_bounce_temp_buffer and ttm_bo_add_move_fence.
V2:rebase the patch on top of drm-misc-next (Christian)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401030443.3384494-1-jesse.zhang@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
The BOs in a bulk move must share all the same reservation object
to make sure that we lock the whole bulk during eviction.
Actually document and enforce that with a warning.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312105555.3065-1-christian.koenig@amd.com
|
|
Previously we would never try to move a BO into the preferred placements
when it |
