| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After the cited commit below max_dest_rd_atomic and max_rd_atomic values
are being rounded down to the next power of 2. As opposed to the old
behavior and mlx4 driver where they used to be rounded up instead.
In order to stay consistent with older code and other drivers, revert to
using fls round function which rounds up to the next power of 2.
Fixes: f18e26af6aba ("RDMA/mlx5: Convert modify QP to use MLX5_SET macros")
Link: https://patch.msgid.link/r/d85515d6ef21a2fa8ef4c8293dce9b58df8a6297.1728550179.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The IB layer provides a common interface to store and get net
devices associated to an IB device port (ib_device_set_netdev()
and ib_device_get_netdev()).
Previously, mlx5_ib stored and managed the associated net devices
internally.
Replace internal net device management in mlx5_ib with
ib_device_set_netdev() when attaching/detaching a net device and
ib_device_get_netdev() when retrieving the net device.
Export ib_device_get_netdev().
For mlx5 representors/PFs/VFs and lag creation we replace the netdev
assignments with the IB set/get netdev functions.
In active-backup mode lag the active slave net device is stored in the
lag itself. To assure the net device stored in a lag bond IB device is
the active slave we implement the following:
- mlx5_core: when modifying the slave of a bond we send the internal driver event
MLX5_DRIVER_EVENT_ACTIVE_BACKUP_LAG_CHANGE_LOWERSTATE.
- mlx5_ib: when catching the event call ib_device_set_netdev()
This patch also ensures the correct IB events are sent in switchdev lag.
While at it, when in multiport eswitch mode, only a single IB device is
created for all ports. The said IB device will receive all netdev events
of its VFs once loaded, thus to avoid overwriting the mapping of PF IB
device to PF netdev, ignore NETDEV_REGISTER events if the ib device has
already been mapped to a netdev.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-6-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
phys_port_cnt of the IB device must be initialized before calling
ib_device_set_netdev().
Previously, phys_port_cnt was initialized in the mlx5_ib init function.
Remove this initialization to allow setting it separately, providing
the flexibility to call ib_device_set_netdev before registering the
IB device.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-4-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Report the upper device's state as the RDMA port state only in RoCE LAG or
switchdev LAG.
Fixes: 27f9e0ccb6da ("net/mlx5: Lag, Add single RDMA device in multiport mode")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-3-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Check if RoCE LAG is active before calling the LAG layer for netdev.
This clarifies if LAG is active. No behavior changes with this patch.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-2-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Consider also the query_vuid cap before enabling the data_direct
functionality.
This may prevent a syndrome from the FW in case the query_vuid command
is not supported. (e.g. migratable VF)
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Gal Shalom <galshalom@nvidia.com>
Link: https://patch.msgid.link/274c4f6f1ac0b1078243dd296695a49dbe58e7d1.1725907637.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Implicit MRs in ODP memory scheme require allocating a private null mkey
and assigning the mkey and va differently in the KSM mkey.
The page faults are received on the null mkey so we also add storing the
null mkey in the odp_mkey xarray.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-8-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The memory scheme page fault event is a new approch in handling page fault
on mkeys using the on-demand-paging feature.
The major shift in handling the page fault in this scheme is that the HW
is taking responsibilty for parsing the faulted mkey instead of the
previous approach where the driver would read and parse the wqes and
query the mkeys to get to the direct mkey that we need to handle.
Therefore, the event we get from FW in this scheme will contain the
direct mkey and address we need to handle and require much less work
from driver.
Additionally, to optimize performance, the FW can generate the event on
a memory area that is larger than the faulted memory operation is
requiring, to 'prefetch' memory that is around it and will likely be
used soon.
Unlike previous types of page fault, the memory page scheme fault does
not always require a resume command after handling the page fault as the FW
can post multiple events on same mkey and will set the 'last' flag only on
the page fault that requires the resume command.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-7-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Split the search for the ODP mkey when handling an rdma type page fault to
a helper function, later to be used in other page fault types.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-6-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The new memory scheme page faults are requesting the driver to fetch
additinal pages to the faulted memory access.
This is done in order to prefetch pages before and after the area that
got the page fault, assuming this will reduce the total amount of page
faults.
The driver should ensure it handles only the pages that are within the
umem range.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-5-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add new fields to support the new memory scheme page fault and extend
the token field to u64 as in the new scheme the token is 48 bit.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-4-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Expose IFC bits to support the new memory scheme on demand paging.
Change the macro reading odp capabilities to be able to read from the
new IFC layout and align the code in upper layers to be compiled.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-3-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Protect the usage of the 6th bit with the relevant capability to ensure
we are using the new page sizes with FW that supports the bit extension.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-2-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix the cleanup of the temp cache entries that are dynamically created
in the MR cache.
The cleanup of the temp cache entries is currently scheduled only when a
new entry is created. Since in the cleanup of the entries only the mkeys
are destroyed and the cache entry stays in the cache, subsequent
registrations might reuse the entry and it will eventually be filled with
new mkeys without cleanup ever getting scheduled again.
On workloads that register and deregister MRs with a wide range of
properties we see the cache ends up holding many cache entries, each
holding the max number of mkeys that were ever used through it.
Additionally, as the cleanup work is scheduled to run over the whole
cache, any mkey that is returned to the cache after the cleanup was
scheduled will be held for less than the intended 30 seconds timeout.
Solve both issues by dropping the existing remove_ent_work and reusing
the existing per-entry work to also handle the temp entries cleanup.
Schedule the work to run with a 30 seconds delay every time we push an
mkey to a clean temp entry.
This ensures the cleanup runs on each entry only 30 seconds after the
first mkey was pushed to an empty entry.
As we have already been distinguishing between persistent and temp entries
when scheduling the cache_work_func, it is not being scheduled in any
other flows for the temp entries.
Another benefit from moving to a per-entry cleanup is we now not
required to hold the rb_tree mutex, thus enabling other flow to run
concurrently.
Fixes: dd1b913fb0d0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/e4fa4bb03bebf20dceae320f26816cd2dde23a26.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When searching the MR cache for suitable cache entries, don't use mkeys
larger than twice the size required for the MR.
This should ensure the usage of mkeys closer to the minimal required size
and reduce memory waste.
On driver init we create entries for mkeys with clear attributes and
powers of 2 sizes from 4 to the max supported size.
This solves the issue for anyone using mkeys that fit these
requirements.
In the use case where an MR is registered with different attributes,
like an access flag we can't UMR, we'll create a new cache entry to store
it upon dereg.
Without this fix, any later registration with same attributes and smaller
size will use the newly created cache entry and it's mkeys, disregarding
the memory waste of using mkeys larger than required.
For example, one worst-case scenario can be when registering and
deregistering a 1GB mkey with ATS enabled which will cause the creation of
a new cache entry to hold those type of mkeys. A user registering a 4k MR
with ATS will end up using the new cache entry and an mkey that can
support a 1GB MR, thus wasting x250k memory than actually needed in the HW.
Additionally, allow all small registration to use the smallest size
cache entry that is initialized on driver load even if size is larger
than twice the required size.
Fixes: 73d09b2fe833 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/8ba3a6e3748aace2026de8b83da03aba084f78f4.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
After an mkey is created, update the counter for pending mkeys before
reshceduling the work that is filling the cache.
Rescheduling the work with a full MR cache entry and a wrong 'pending'
counter will cause us to miss disabling the fill_to_high_water flag.
Thus leaving the cache full but with an indication that it's still
needs to be filled up to it's full size (2 * limit).
Next time an mkey will be taken from the cache, we'll unnecessarily
continue the process of filling the cache to it's full size.
Fixes: 57e7071683ef ("RDMA/mlx5: Implement mkeys management via LIFO queue")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/0f44f462ba22e45f72cb3d0ec6a748634086b8d0.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The canceling of dealyed work in clean_keys() is a leftover from years
back and was added to prevent races in the cleanup process of MR cache.
The cleanup process was rewritten a few years ago and the canceling of
delayed work and flushing of workqueue was added before the call to
clean_keys().
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/943d21f5a9dba7b98a3e1d531e3561ffe9745d71.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When creating kernel MRs, it is not definitive whether they will be used
for peer-to-peer transactions or for other usecases, since address
mapping is performed only after the MR is created.
Since peer-to-peer transactions benefit significantly from ATS
performance-wise, enable ATS on newly-allocated kernel MRs when
supported.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Gal Shalom <galshalom@nvidia.com>
Link: https://patch.msgid.link/fafd4c9f14cf438d2882d88649c2947e1d05d0b4.1725273403.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The cited commit moves the pd allocation from function
mlx5r_umr_resource_cleanup() to a new function mlx5r_umr_cleanup().
So the fix in commit [1] is broken. In error flow, will hit panic [2].
Fix it by checking pd pointer to avoid panic if it is NULL;
[1] RDMA/mlx5: Fix UMR cleanup on error flow of driver init
[2]
[ 347.567063] infiniband mlx5_0: Couldn't register device with driver model
[ 347.591382] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 347.593438] #PF: supervisor read access in kernel mode
[ 347.595176] #PF: error_code(0x0000) - not-present page
[ 347.596962] PGD 0 P4D 0
[ 347.601361] RIP: 0010:ib_dealloc_pd_user+0x12/0xc0 [ib_core]
[ 347.604171] RSP: 0018:ffff888106293b10 EFLAGS: 00010282
[ 347.604834] RAX: 0000000000000000 RBX: 000000000000000e RCX: 0000000000000000
[ 347.605672] RDX: ffff888106293ad0 RSI: 0000000000000000 RDI: 0000000000000000
[ 347.606529] RBP: 0000000000000000 R08: ffff888106293ae0 R09: ffff888106293ae0
[ 347.607379] R10: 0000000000000a06 R11: 0000000000000000 R12: 0000000000000000
[ 347.608224] R13: ffffffffa0704dc0 R14: 0000000000000001 R15: 0000000000000001
[ 347.609067] FS: 00007fdc720cd9c0(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000
[ 347.610094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 347.610727] CR2: 0000000000000020 CR3: 0000000103012003 CR4: 0000000000370eb0
[ 347.611421] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 347.612113] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 347.612804] Call Trace:
[ 347.613130] <TASK>
[ 347.613417] ? __die+0x20/0x60
[ 347.613793] ? page_fault_oops+0x150/0x3e0
[ 347.614243] ? free_msg+0x68/0x80 [mlx5_core]
[ 347.614840] ? cmd_exec+0x48f/0x11d0 [mlx5_core]
[ 347.615359] ? exc_page_fault+0x74/0x130
[ 347.615808] ? asm_exc_page_fault+0x22/0x30
[ 347.616273] ? ib_dealloc_pd_user+0x12/0xc0 [ib_core]
[ 347.616801] mlx5r_umr_cleanup+0x23/0x90 [mlx5_ib]
[ 347.617365] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x36/0x40 [mlx5_ib]
[ 347.618025] __mlx5_ib_add+0x96/0xd0 [mlx5_ib]
[ 347.618539] mlx5r_probe+0xe9/0x310 [mlx5_ib]
[ 347.619032] ? kernfs_add_one+0x107/0x150
[ 347.619478] ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib]
[ 347.619984] auxiliary_bus_probe+0x3e/0x90
[ 347.620448] really_probe+0xc5/0x3a0
[ 347.620857] __driver_probe_device+0x80/0x160
[ 347.621325] driver_probe_device+0x1e/0x90
[ 347.621770] __driver_attach+0xec/0x1c0
[ 347.622213] ? __device_attach_driver+0x100/0x100
[ 347.622724] bus_for_each_dev+0x71/0xc0
[ 347.623151] bus_add_driver+0xed/0x240
[ 347.623570] driver_register+0x58/0x100
[ 347.623998] __auxiliary_driver_register+0x6a/0xc0
[ 347.624499] ? driver_register+0xae/0x100
[ 347.624940] ? 0xffffffffa0893000
[ 347.625329] mlx5_ib_init+0x16a/0x1e0 [mlx5_ib]
[ 347.625845] do_one_initcall+0x4a/0x2a0
[ 347.626273] ? gcov_event+0x2e2/0x3a0
[ 347.626706] do_init_module+0x8a/0x260
[ 347.627126] init_module_from_file+0x8b/0xd0
[ 347.627596] __x64_sys_finit_module+0x1ca/0x2f0
[ 347.628089] do_syscall_64+0x4c/0x100
Fixes: 638420115cc4 ("IB/mlx5: Create UMR QP just before first reg_mr occurs")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Link: https://patch.msgid.link/778c40c60287992da5d6ec92bb07b67f7bb5e6ef.1725273295.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Commit e6fb246ccafb ("RDMA/mlx5: Consolidate MR destruction to
mlx5_ib_dereg_mr()") removed mlx5_ib_free_implicit_mr() but left
the declaration.
Commit d98995b4bf98 ("net/mlx5: Reimplement write combining test") left
mlx5_ib_test_wc().
Remove the unused declarations.
Link: https://patch.msgid.link/r/20240816101358.881247-1-yuehaibing@huawei.com
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Introduce the 'GET_DATA_DIRECT_SYSFS_PATH' ioctl to return the sysfs
path of the affiliated 'data direct' device for a given device.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/403745463e0ef52adbef681ff09aa6a29a756352.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add support for DMABUF MR registrations with Data-direct device.
Upon userspace calling to register a DMABUF MR with the data direct bit
set, the below algorithm will be followed.
1) Obtain a pinned DMABUF umem from the IB core using the user input
parameters (FD, offset, length) and the DMA PF device. The DMA PF
device is needed to allow the IOMMU to enable the DMA PF to access the
user buffer over PCI.
2) Create a KSM MKEY by setting its entries according to the user buffer
VA to IOVA mapping, with the MKEY being the data direct device-crossed
MKEY. This KSM MKEY is umrable and will be used as part of the MR cache.
The PD for creating it is the internal device 'data direct' kernel one.
3) Create a crossing MKEY that points to the KSM MKEY using the crossing
access mode.
4) Manage the KSM MKEY by adding it to a list of 'data direct' MKEYs
managed on the mlx5_ib device.
5) Return the crossing MKEY to the user, created with its supplied PD.
Upon DMA PF unbind flow, the driver will revoke the KSM entries.
The final deregistration will occur under the hood once the application
deregisters its MKEY.
Notes:
- This version supports only the PINNED UMEM mode, so there is no
dependency on ODP.
- The IOVA supplied by the application must be system page aligned due to
HW translations of KSM.
- The crossing MKEY will not be umrable or part of the MR cache, as we
cannot change its crossed (i.e. KSM) MKEY over UMR.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/1f99d8020ed540d9702b9e2252a145a439609ba6.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pass uverbs_attr_bundle as part of '.reg_user_mr_dmabuf' API instead of
udata.
This enables passing some new ioctl attributes to the drivers, as will
be introduced in the next patches for mlx5 driver.
Change the involved drivers accordingly.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/9a25b2fc02443f7c36c2d93499ae25252b6afd40.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add the NET device initialization flow to utilize the 'data
direct' device.
When a NET mlx5_ib device is capable of 'data direct', the following
sequence of actions will occur:
- Find its affiliated 'data direct' VUID via a firmware command.
- Create its own private PD and 'data direct' mkey.
- Register to be notified when its 'data direct' driver is probed or removed.
The DMA device of the affiliated 'data direct' device, including the
private PD and the 'data direct' mkey, will be used later during MR
registrations that request the data direct functionality.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/b11fa87b2a65bce4db8d40341bb6cee490fa4d06.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce the 'data direct' driver for a ConnectX-8 Data Direct device.
The 'data direct' driver functions as the affiliated DMA device for one
or more capable mlx5_ib devices. This DMA device, as the name suggests,
is used exclusively for DMA operations. It can be considered a DMA engine
managed by a PF/VF, lacking network capabilities and having minimal overall
capabilities.
Consequently, the DMA NIC PF will not be exposed to or directly used by
software applications. The driver will not have any direct interface or
interaction with the firmware (no command interface, no capabilities,
etc.). It will operate solely over PCI to enable its DMA functionality.
Registration and un-registration of the driver are handled as part of
the mlx5_ib initialization and exit processes, as the mlx5_ib devices
will effectively be its clients.
The driver will serve as the DMA device for accessing another PCI device
to achieve optimal performance (both on the same NUMA node, P2P access,
etc.).
Upon probing, it will read its VUID over PCI to handle mlx5_ib device
registrations with the same VUID.
Upon removal, it will notify its clients to allow them to clean up the
resources that were mmaped with its DMA device.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/b77edecfd476c3f445da96ab6aef499ae47b2829.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In multiport mode, RDMA devices make it impossible for userspace to use
DEVX to discover vhca id values for ports beyond port 1. This patch
addresses the issue by exposing the vhca id of all ports.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://patch.msgid.link/41dea83aa51843aa4c067b4f73f28d64e51bd53c.1722331101.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in efa, irdma, mlx4, mlx5, rxe,
hf1, qib, ocrdma
- bnxt_re support for MSN, which is a new retransmit logic
- Initial mana support for RC qps
- Use after free bug and cleanups in iwcm
- Reduce resource usage in mlx5 when RDMA verbs features are not used
- New verb to drain shared recieve queues, similar to normal recieve
queues. This is necessary to allow ULPs a clean shutdown. Used in
the iscsi rdma target
- mlx5 support for more than 16 bits of doorbell indexes
- Doorbell moderation support for bnxt_re
- IB multi-plane support for mlx5
- New EFA adaptor PCI IDs
- RDMA_NAME_ASSIGN_TYPE_USER to hint to userspace that it shouldn't
rename the device
- A collection of hns bugs
- Fix long standing bug in bnxt_re with incorrect endian handling of
immediate data"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
IB/hfi1: Constify struct flag_table
RDMA/mana_ib: Set correct device into ib
bnxt_re: Fix imm_data endianness
RDMA: Fix netdev tracker in ib_device_set_netdev
RDMA/hns: Fix mbx timing out before CMD execution is completed
RDMA/hns: Fix insufficient extend DB for VFs.
RDMA/hns: Fix undifined behavior caused by invalid max_sge
RDMA/hns: Fix shift-out-bounds when max_inline_data is 0
RDMA/hns: Fix missing pagesize and alignment check in FRMR
RDMA/hns: Fix unmatch exception handling when init eq table fails
RDMA/hns: Fix soft lockup under heavy CEQE load
RDMA/hns: Check atomic wr length
RDMA/ocrdma: Don't inline statistics functions
RDMA/core: Introduce "name_assign_type" for an IB device
RDMA/qib: Fix truncation compilation warnings in qib_verbs.c
RDMA/qib: Fix truncation compilation warnings in qib_init.c
RDMA/efa: Add EFA 0xefa3 PCI ID
RDMA/mlx5: Support per-plane port IB counters by querying PPCNT register
net/mlx5: mlx5_ifc update for accessing ppcnt register of plane ports
RDMA/mlx5: Add plane index support when querying PTYS registers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
aux-sysfs-irqs
Shay Says:
==========
Introduce auxiliary bus IRQs sysfs
Today, PCI PFs and VFs, which are anchored on the PCI bus, display their
IRQ information in the <pci_device>/msi_irqs/<irq_num> sysfs files. PCI
subfunctions (SFs) are similar to PFs and VFs and these SFs are anchored
on the auxiliary bus. However, these PCI SFs lack such IRQ information
on the auxiliary bus, leaving users without visibility into which IRQs
are used by the SFs. This absence makes it impossible to debug
situations and to understand the source of interrupts/SFs for
performance tuning and debug.
Additionally, the SFs are multifunctional devices supporting RDMA,
network devices, clocks, and more, similar to their peer PCI PFs and
VFs. Therefore, it is desirable to have SFs' IRQ information available
at the bus/device level.
To overcome the above limitations, this short series extends the
auxiliary bus to display IRQ information in sysfs, similar to that of
PFs and VFs.
It adds an 'irqs' directory under the auxiliary device and includes an
<irq_num> sysfs file within it.
For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50 51 52 53 54 55 56 57 58
Patch summary:
patch-1 adds auxiliary bus to support irqs used by auxiliary device
patch-2 mlx5 driver using exposing irqs for PCI SF devices via auxiliary
bus
==========
* tag 'aux-sysfs-irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose SFs IRQs
driver core: auxiliary bus: show auxiliary device IRQs
RDMA/mlx5: Add Qcounters req_transport_retries_exceeded/req_rnr_retries_exceeded
net/mlx5: Reimplement write combining test
====================
Link: https://patch.msgid.link/20240711213140.256997-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The name_assign_type indicates how the name is provided. Currently
these types are supported:
- RDMA_NAME_ASSIGN_TYPE_UNKNOWN: Unknown or not set;
- RDMA_NAME_ASSIGN_TYPE_USER: Name is provided by the user; The
user-created sub device, rxe and siw device has this type.
When filling nl device info, it is set in the new attribute
RDMA_NLDEV_ATTR_NAME_ASSIGN_TYPE. User-space tools like udev
"rdma_rename" could check this attribute to determine if this
device needs to be renamed or not.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/522591bef9a369cc8e5dcb77787e017bffee37fe.1719837610.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Supports per-plane port counters by querying PPCNT register with the
"extended port counters" group, as the query_vport_counter command
doesn't support plane ports.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/06ffb582d67159b7def4654c8272d3d6e8bd2f2f.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Support the new "plane_ind" field when querying port PTYS registers.
This is needed when querying the rate of a plane port.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/1f703c36306aa46917fcd88eadbb23b3e380d526.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
This patch supports driver APIs "add_sub_dev" and "del_sub_dev", to
add and delete a plane device respectively.
A mlx5 plane device is a rdma SMI device; It provides the SMI capability
through user MAD for it's parent, the logical multi-plane aggregated
device. For a plane port:
- It supports QP0 only;
- When adding a plane device, all plane ports are added;
- For some commands like mad_ifc, both plane_index and native portnum
is needed;
- When querying or modifying a plane port context, the native portnum
must be used, as the query/modify_hca_vport_context command doesn't
support plane port.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/e933cd0562aece181f8657af2ca0f5b387d0f14e.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
When multi-plane is supported, a logical port, which is aggregation of
multiple physical plane ports, is exposed for data transmission.
Compared with a normal mlx5 IB port, this logical port supports all
functionalities except Subnet Management.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/7e37c06c9cb243be9ac79930cd17053903785b95.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Add UAR page index as a driver ioctl attribute to increase the number of
supported indices, previously limited to 16 bits by mlx5_ib_create_cq
struct.
Link: https://lore.kernel.org/r/0e18b34d7ec3b1ae02d694b0d545aed7413c0ef7.1719512393.git.leon@kernel.org
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Changes the create_cq verb signature by sending the entire uverbs attr
bundle as a parameter. This allows drivers to send driver specific attrs
through ioctl for the create_cq verb and access them in their driver
specific code.
Also adds a new enum value for driver specific ioctl attributes for
methods already supporting UHW.
Link: https://lore.kernel.org/r/ed147343987c0d43fd391c1b2f85e2f425747387.1719512393.git.leon@kernel.org
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
max_sge attribute is passed by the user, and is inserted and used
unchecked, so verify that the value doesn't exceed maximum allowed value
before using it.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/277ccc29e8d57bfd53ddeb2ac633f2760cf8cdd0.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix unwind flow as part of mlx5_ib_stage_init_init to use the correct
goto upon an error.
Fixes: 758ce14aee82 ("RDMA/mlx5: Implement MACsec gid addition and deletion")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/aa40615116eda14ec9eca21d52017d632ea89188.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
cachable and mmkey.rb_key together are used by mlx5_revoke_mr() to put the
MR/mkey back into the cache. In all cases they should be set correctly.
alloc_cacheable_mr() was setting cachable but not filling rb_key,
resulting in cache_ent_find_and_store() bucketing them all into a 0 length
entry.
implicit_get_child_mr()/mlx5_ib_alloc_implicit_mr() failed to set cachable
or rb_key at all, so the cache was not working at all for implicit ODP.
Cc: stable@vger.kernel.org
Fixes: 8c1185fef68c ("RDMA/mlx5: Change check for cacheable mkeys")
Fixes: dd1b913fb0d0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7778c02dfa0999a30d6746c79a23dd7140a9c729.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When a cache ent already exists but doesn't have any mkeys in it the cache
will automatically create a new one based on the specification in the
ent->rb_key.
ent->ats was missed when creating the new key and so ma_translation_mode
was not being set even though the ent requires it.
Cc: stable@vger.kernel.org
Fixes: 73d09b2fe833 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/7c5613458ecb89fbe5606b7aa4c8d990bdea5b9a.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The below commit lifted the locking out of this function but left this
error path unlock behind resulting in unbalanced locking. Remove the
missed unlock too.
Cc: stable@vger.kernel.org
Fixes: 627122280c87 ("RDMA/mlx5: Add work to remove temporary entries from the cache")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/78090c210c750f47219b95248f9f782f34548bb1.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The req_transport_retries_exceeded counter shows the number of times
requester detected transport retries exceed error.
The req_rnr_retries_exceeded counter show the number of times the
requester detected RNR NAKs retries exceed error.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The req_transport_retries_exceeded counter shows the number of times
requester detected transport retries exceed error.
The req_rnr_retries_exceeded counter show the number of times the
requester detected RNR NAKs retries exceed error.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/250466af94f4989d638fab168e246035530e912f.1718301543.git.leon@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Set the mkey for dmabuf at PAGE_SIZE to support any SGL
after a move operation.
ib_umem_find_best_pgsz returns 0 on error, so it is
incorrect to check the returned page_size against PAGE_SIZE
Fixes: 90da7dc8206a ("RDMA/mlx5: Support dma-buf based userspace memory region")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/1e2289b9133e89f273a4e68d459057d032cbc2ce.1718301631.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Previously, all IB dev resources are initialized on driver load. As
they are not always used, move the initialization to the time when
they are needed.
To be more specific, move PD (p0) and CQ (c0) initialization to the
time when the first SRQ is created. and move SRQs（s0 and s1)
initialization to the time first QP is created. To avoid concurrent
creations, two new mutexes are also added.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Link: https://lore.kernel.org/r/98c3e53a8cc0bdfeb6dec6e5bb8b037d78ab00d8.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
UMR QP is not used in some cases, so move QP and its CQ creations from
driver load flow to the time first reg_mr occurs, that is when MR
interfaces are first called.
The initialization of dev->umrc.pd and dev->umrc.lock is still done in
driver load because pd is needed for mlx5_mkey_cache_init and the lock
is reused to protect against the concurrent creation.
When testing 4G bytes memory registration latency with rtool [1] and 8
threads in parallel, there is minor performance degradation (<5% for
the max latency) is seen for the first reg_mr with this change.
Link: https://github.com/paravmellanox/rtool [1]
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Link: https://lore.kernel.org/r/55d3c4f8a542fd974d8a4c5816eccfb318a59b38.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The test of write combining was added before in mlx5_ib driver. It
opens UD QP and posts NOP WQEs, and uses BlueFlame doorbell. When
BlueFlame is used, WQEs get written directly to a PCI BAR of the
device (in addition to memory) so that the device handles them without
having to access memory.
In this test, the WQEs written in memory are different from the ones
written to the BlueFlame which request CQE update. By checking the
completion reports posted on CQ, we can know if BlueFlame succeeds or
not. The write combining must be supported if BlueFlame succeeds as
its register is written using write combining.
This patch reimplements the test in the same way, but using a pair of
SQ and CQ only. It is moved to mlx5_core as a general feature used by
both mlx5_core and mlx5_ib.
Besides, save write combine test result of the PCI function, so that
its thousands of child functions such as SF can query without paying
the time and resource penalty by itself. The test function is called
only after failing to get the cached result. With this enhancement,
all thousands of SFs of the PF attached to same driver no longer need
to perform WC check explicitly, which is already done in the system.
This saves several commands per SF, thereby speeds up SF creation and
also saves completion EQ creation.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/4ff5a8cc4c5b5b0d98397baa45a5019bcdbf096e.1717409369.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"Aside from the usual things this has an arch update for
__iowrite64_copy() used by the RDMA drivers.
This API was intended to generate large 64 byte MemWr TLPs on PCI.
These days most processors had done this by just repeating writel() in
a loop. S390 and some new ARM64 designs require a special helper to
get this to generate.
- Small improvements and fixes for erdma, efa, hfi1, bnxt_re
- Fix a UAF crash after module unload on leaking restrack entry
- Continue adding full RDMA support in mana with support for EQs,
GID's and CQs
- Improvements to the mkey cache in mlx5
- DSCP traffic class support in hns and several bug fixes
- Cap the maximum number of MADs in the receive queue to avoid OOM
- Another batch of rxe bug fixes from large scale testing
- __iowrite64_copy() optimizations for write combining MMIO memory
- Remove NULL checks before dev_put/hold()
- EFA su |
