summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Expand)AuthorFilesLines
2019-06-25mmc: core: Prevent processing SDIO IRQs when the card is suspendedUlf Hansson2-1/+16
2019-06-15mmc: mmci: Prevent polling for busy detection in IRQ contextLudovic Barre1-2/+3
2019-05-31mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 supportYinbo Zhu1-1/+3
2019-05-31mmc: sdhci-of-esdhc: add erratum A-009204 supportYinbo Zhu1-0/+3
2019-05-31mmc: sdhci-of-esdhc: add erratum eSDHC5 supportYinbo Zhu1-0/+3
2019-05-31mmc_spi: add a status check for spi_sync_lockedKangjie Lu1-0/+4
2019-05-31mmc: core: make pwrseq_emmc (partially) support sleepy GPIO controllersAndrea Merello1-18/+20
2019-05-31mmc: core: Verify SD bus widthRaul E Rangel1-0/+8
2019-05-31mmc: sdhci-iproc: Set NO_HISPD bit to fix HS50 data hold time problemTrac Hoang1-1/+2
2019-05-31mmc: sdhci-iproc: cygnus: Set NO_HISPD bit to fix HS50 data hold time problemTrac Hoang1-1/+2
2019-05-14x86/cpu: Sanitize FAM6_ATOM namingPeter Zijlstra1-1/+1
2019-04-27mmc: sdhci: Handle auto-command errorsAdrian Hunter2-1/+41
2019-04-27mmc: sdhci: Rename SDHCI_ACMD12_ERR and SDHCI_INT_ACMD12ERRAdrian Hunter3-10/+10
2019-04-27mmc: sdhci: Fix data command CRC error handlingAdrian Hunter1-25/+15
2019-04-20mmc: davinci: remove extraneous __init annotationArnd Bergmann1-1/+1
2019-04-05mmc: omap: fix the maximum timeout settingAaro Koskinen1-1/+1
2019-03-27mmc: pxamci: fix enum type confusionArnd Bergmann1-1/+1
2019-03-23mmc: sdhci-esdhc-imx: fix HS400 timing issueBOUGH CHEN1-0/+1
2019-03-05mmc: sdhci-esdhc-imx: correct the fix of ERR004536BOUGH CHEN1-4/+5
2019-03-05mmc: tmio: fix access width of Block Count RegisterTakeshi Saito3-1/+11
2019-03-05mmc: tmio_mmc_core: don't claim spurious interruptsSergei Shtylyov1-4/+7
2019-03-05mmc: spi: Fix card detection during probeJonathan Neuschäfer1-0/+1
2019-02-12mmc: sdhci-xenon: Fix timeout checksAdrian Hunter2-6/+14
2019-02-12mmc: sdhci-of-esdhc: Fix timeout checksAdrian Hunter1-4/+12
2019-02-12mmc: bcm2835: reset host on timeoutMichal Suchanek1-0/+3
2019-02-12mmc: bcm2835: Recover from MMC_SEND_EXT_CSDPhil Elwell1-0/+9
2019-02-06mmc: sdhci-iproc: handle mmc_of_parse() errors during probeStefan Wahren1-1/+4
2019-02-06mmc: bcm2835: Fix DMA channel leak on probe errorLukas Wunner1-0/+2
2019-01-31mmc: Kconfig: Enable CONFIG_MMC_SDHCI_IO_ACCESSORSVijay Viswanath1-0/+1
2019-01-26mmc: atmel-mci: do not assume idle after atmci_request_endJonas Danielsson1-1/+2
2019-01-23mmc: sdhci-msm: Disable CDR function on TXLoic Poulain1-1/+50
2018-12-29mmc: omap_hsmmc: fix DMA API warningRussell King1-1/+11
2018-12-29mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrlUlf Hansson1-4/+10
2018-12-29mmc: core: Allow BKOPS and CACHE ctrl even if no HPI supportUlf Hansson1-4/+2
2018-12-29mmc: core: Reset HPI enabled state during re-init and in case of errorsUlf Hansson1-1/+3
2018-12-21mmc: sdhci: fix the timeout check window for clock and resetAlek Du1-5/+13
2018-12-21MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310Aaro Koskinen1-2/+9
2018-12-01mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULLRajat Jain1-1/+6
2018-11-13mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01Yu Zhao1-0/+3
2018-11-04mmc: dw_mmc-rockchip: correct property names in debugJohn Keeping1-2/+2
2018-10-18mmc: block: avoid multiblock reads for the last sector in SPI modeChris Boot1-0/+10
2018-09-26mmc: sdhci: do not try to use 3.3V signaling if not supportedStefan Agner1-1/+8
2018-09-26mmc: tegra: prevent HS200 on Tegra 3Stefan Agner1-1/+2
2018-09-26mmc: sdhci-of-esdhc: set proper dma mask for ls104x chipsLaurentiu Tudor1-0/+6
2018-09-26mmc: omap_hsmmc: fix wakeirq handling on removalAndreas Kemnade1-0/+1
2018-09-09mmc: renesas_sdhi_internal_dmac: fix #define RST_RESERVED_BITSSergei Shtylyov1-1/+1
2018-08-03mmc: pwrseq: Use kmalloc_array instead of stack VLATobin C. Harding1-5/+9
2018-08-03mmc: dw_mmc: update actual clock for mmc debugfsShawn Lin1-0/+4
2018-07-17mmc: dw_mmc: fix card threshold control configurationx002701701-3/+4
2018-07-17mmc: sdhci-esdhc-imx: allow 1.8V modes without 100/200MHz pinctrl statesStefan Agner1-12/+9
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-14 08:14:12 +0000