| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.12-rc4
Fix two instances of memory leaks, one in ath10k and one in ath11k.
|
|
In the current logic, memory is allocated for storing the MSDU context
during management packet TX but this memory is not being freed during
management TX completion. Similar leaks are seen in the management TX
cleanup logic.
Kmemleak reports this problem as below,
unreferenced object 0xffffff80b64ed250 (size 16):
comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s)
hex dump (first 16 bytes):
00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t......
backtrace:
[<ffffffe6e7b245dc>] __kmem_cache_alloc_node+0x1e4/0x2d8
[<ffffffe6e7adde88>] kmalloc_trace+0x48/0x110
[<ffffffe6bbd765fc>] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core]
[<ffffffe6bbd3eed4>] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core]
[<ffffffe6e78d5974>] process_scheduled_works+0x1ac/0x400
[<ffffffe6e78d60b8>] worker_thread+0x208/0x328
[<ffffffe6e78dc890>] kthread+0x100/0x1c0
[<ffffffe6e78166c0>] ret_from_fork+0x10/0x20
Free the memory during completion and cleanup to fix the leak.
Protect the mgmt_pending_tx idr_remove() operation in
ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to
other instances.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
Fixes: dc405152bb64 ("ath10k: handle mgmt tx completion event")
Fixes: c730c477176a ("ath10k: Remove msdu from idr when management pkt send fails")
Cc: stable@vger.kernel.org
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Link: https://patch.msgid.link/20241015064103.6060-1-quic_mpubbise@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
|
|
Currently DFS works under assumption there could be only one channel
context in the hardware. Hence, drivers just calls the function
ieee80211_radar_detected() passing the hardware structure. However, with
MLO, this obviously will not work since number of channel contexts will be
more than one and hence drivers would need to pass the channel information
as well on which the radar is detected.
Also, when radar is detected in one of the links, other link's CAC should
not be cancelled.
Hence, in order to support DFS with MLO, do the following changes -
* Add channel context conf pointer as an argument to the function
ieee80211_radar_detected(). During MLO, drivers would have to pass on
which channel context conf radar is detected. Otherwise, drivers could
just pass NULL.
* ieee80211_radar_detected() will iterate over all channel contexts
present and
* if channel context conf is passed, only mark that as radar
detected
* if NULL is passed, then mark all channel contexts as radar
detected
* Then as usual, schedule the radar detected work.
* In the worker, go over all the contexts again and for all such context
which is marked with radar detected, cancel the ongoing CAC by calling
ieee80211_dfs_cac_cancel() and then notify cfg80211 via
cfg80211_radar_event().
* To cancel the CAC, pass the channel context as well where radar is
detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is
canceled only on the links using the provided context, leaving other
links unaffected.
This would also help in scenarios where there is split phy 5 GHz radio,
which is capable of DFS channels in both lower and upper band. In this
case, simultaneous radars can be detected.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
|
|
An iommu domain is allocated in ath10k_fw_init() and is attached to
ar_snoc->fw.dev in the same function. Use iommu_paging_domain_alloc() to
make it explicit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240610085555.88197-11-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This will allow the low level driver to take different actions for
different flows.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
ath.git fixes for 6.10. Two fixes for user reported regressions in
ath11k. One dependency fix and one error path fix.
|
|
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
|
|
If ath10k_snoc is built-in, while Qualcomm remoteprocs are built as
modules, compilation fails with:
/usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_init':
drivers/net/wireless/ath/ath10k/snoc.c:1534: undefined reference to `qcom_register_ssr_notifier'
/usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_deinit':
drivers/net/wireless/ath/ath10k/snoc.c:1551: undefined reference to `qcom_unregister_ssr_notifier'
Add corresponding dependency to ATH10K_SNOC Kconfig entry so that it's
built as module if QCOM_RPROC_COMMON is built as module too.
Fixes: 747ff7d3d742 ("ath10k: Don't always treat modem stop events as crashes")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240511-ath10k-snoc-dep-v1-1-9666e3af5c27@linaro.org
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Increase the timeout period of the ACMD41 command
- Add card entry for quirks to debugfs
- Add mmc_gpiod_set_cd_config() function
- Store owner from SDIO modules with sdio_register_driver()
MMC host:
- atmel-mci: Some cleanups and a switch to use dev_err_probe()
- renesas_sdhi:
- Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
- Set the SDBUF after reset
- sdhci: Add support for "Tuning Error" interrupts
- sdhci-acpi:
- Add quirk to enable pull-up on the card-detect GPIO on Asus
T100TA
- Disable write protect detection on Toshiba WT10-A
- Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
- sdhci_am654:
- Re-work and fix the tuning support for multiple speed-modes
- Add tuning algorithm for delay chain
- sdhci-esdhc-imx: Add NXP S32G3 support
- sdhci-of-dwcmshc:
- Add tuning support for Sophgo CV1800B and SG200X
- Implement SDHCI CQE support
- sdhci-pci-gli: Use the proper pci_set_power_state() instead of
PMCSR writes"
MEMSTICK:
- Convert a couple of drivers to use the ->remove_new() callback"
* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
mmc: renesas_sdhi: Set the SDBUF after reset
mmc: core: Increase the timeout period of the ACMD41 command
mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
mmc: atmel-mci: Switch to use dev_err_probe()
mmc: atmel-mci: Incapsulate used to be a platform data into host structure
mmc: atmel-mci: Replace platform device pointer by generic one
mmc: atmel-mci: Use temporary variable for struct device
mmc: atmel-mci: Get rid of platform data leftovers
mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
mmc: sdhci-s3c: Choose sdhci_ops based on variant
mmc: sdhci_am654: Constify struct sdhci_ops
mmc: sdhci-sprd: Constify struct sdhci_ops
mmc: sdhci-omap: Constify struct sdhci_ops
mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
mmc: slot-gpio: Use irq_handler_t type
mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
...
|
|
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
|
|
The ath10k driver waits for an "MSA_READY" indicator
to complete initialization. If the indicator is not
received, then the device remains unusable.
Several msm8998-based devices are affected by this issue.
Oddly, it seems safe to NOT wait for the indicator, and
proceed immediately when QMI_EVENT_SERVER_ARRIVE.
fw_version 0x100204b2
fw_build_timestamp 2019-09-04 03:01
fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.1.0-01202-QCAHLSWMTPLZ-1.221523.2
Jeff Johnson wrote:
The feedback I received was "it might be ok to change all ath10k qmi
to skip waiting for msa_ready", and it was pointed out that ath11k
(and ath12k) do not wait for it.
However with so many deployed devices, "might be ok" isn't a strong
argument for changing the default behavior.
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/23540303-5816-45d5-a1af-5f09d645a73b@freebox.fr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.10
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
|
|
To be consistent with the deprecation of PCI_IRQ_LEGACY and its
replacement with PCI_IRQ_INTX, rename macros and functions referencing
"legacy irq" to instead use the term "intx irq".
Link: https://lore.kernel.org/r/20240325070944.3600338-20-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Follow the example set up by previous commit and drop .fw.eboard
setting. Instead always use "eboard.bin" in this case. QCA9984 already
uses that file name, any (im)possible future users will just have to use
the same file name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130-wcn3990-board-fw-v1-3-738f7c19a8c8@linaro.org
|
|
The .fw.board parameter predates board-2.bin support. For all the
platforms, which define this parameter, it is equal to "board.bin".
Other platforms (like WCN3990) ommit it, limiting the ability to
provide board-specific data file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130-wcn3990-board-fw-v1-2-738f7c19a8c8@linaro.org
|
|
Specify board data size (and board.bin filename) for the WCN3990
platform.
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Fixes: 03a72288c546 ("ath10k: wmi: add hw params entry for wcn3990")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240130-wcn3990-board-fw-v1-1-738f7c19a8c8@linaro.org
|
|
ath10k_dbg_sta_write_peer_debug_trigger()
Clang Static Checker (scan-build) warns:
drivers/net/wireless/ath/ath10k/debugfs_sta.c:line 429, column 3
Value stored to 'ret' is never read.
Return 'ret' rather than 'count' when 'ret' stores an error code.
Fixes: ee8b08a1be82 ("ath10k: add debugfs support to get per peer tids log via tracing")
Signed-off-by: Su Hui <suhui@nfschina.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240422034243.938962-1-suhui@nfschina.com
|
|
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from struct ath10k by converting it
into a pointer. Then use the leverage alloc_netdev() to allocate the
net_device object at ath10k_core_create(). The free of the device occurs
at ath10k_core_destroy().
[1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Different Qualcomm platforms using WCN3990 WiFI chip use SoC-specific
firmware versions with different features. For example firmware for
SDM845 doesn't use single-chan-info-per-channel feature, while firmware
for QRB2210 / QRB4210 requires that feature. Allow board DT files to
override the subdir of the fw dir used to lookup the firmware-N.bin file
decribing corresponding WiFi firmware.
For example:
- ath10k/WCN3990/hw1.0/wlanmdsp.mbn,
ath10k/WCN3990/hw1.0/firmware-5.bin: main firmware files, used by default
- ath10k/WCN3990/hw1.0/qcm2290/wlanmdsp.mbn,
ath10k/WCN3990/hw1.0/qcm2290/firmware-5.bin: SoC specific firmware
with different signature and feature bits
Note, while board files lookup uses the same function and thus it is
possible to provide board-specific board-2.bin files, this is not
required in 99% of cases as board-2.bin already contains a way to
provide board-specific data with finer granularity than DT overrides.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240306-wcn3990-firmware-path-v2-2-f89e98e71a57@linaro.org
|
|
Core in sdio_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240403-module-owner-sdio-v2-4-ae46d6b955eb@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This driver's initialization functions do not perform any custom code,
except printing messages. Printing messages on modules
loading/unloading is discouraged because it pollutes the dmesg
regardless whether user actually has this device. Core kernel code
already gives tools to investigate whether module was loaded or not.
Drop the printing messages which allows to replace open-coded
module_sdio_driver().
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240403-module-owner-sdio-v2-3-ae46d6b955eb@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() will be converted as weel if they have.
Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended
CC: Kalle Valo <kvalo@kernel.org>
CC: Jeff Johnson <jjohnson@kernel.org>
CC: linux-wireless@vger.kernel.org
CC: ath11k@lists.infradead.org
CC: ath10k@lists.infradead.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240315055211.1347548-1-lizhijian@fujitsu.com
|
|
Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:
[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110
And finally it causes WLAN interface bring up failure.
Change to give it one more chance here by polling CE rings,
before failing directly.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1
Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Reported-by: James Prestwood <prestwoj@gmail.com>
Tested-By: James Prestwood <prestwoj@gmail.com> # on QCA6174 hw3.2
Link: https://lore.kernel.org/linux-wireless/304ce305-fbe6-420e-ac2a-d61ae5e6ca1a@gmail.com/
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240227030409.89702-1-quic_bqiang@quicinc.com
|
|
Currently, function to check if beacon countdown is complete uses deflink
to fetch the beacon and check the counter. However, with MLO, there is
a need to check the counter for the beacon in a particular link.
Add support to use link_id in order to fetch the beacon from a particular
link data.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a
finalizing worker using the deflink. With MLO, there is a need to do it
on a given link basis.
Pass link ID of the link on which CSA needs to be finalized.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, function to update beacon counter uses deflink to fetch
the beacon and then update the counter. However, with MLO, there is
a need to update the counter for the beacon in a particular link.
Add support to use link_id in order to fetch the beacon from a particular
link data during beacon update counter.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240130140918.1172387-3-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.9
We have new features for both ath11k and ath12k. ath12k is now under
heavy refactoring in preparation for MLO support.
Major changes:
ath12k
* refactoring in preparation for Multi-Link Operation (MLO) support
* 1024 Block Ack window size support
* provide firmware wmi logs via a trace event
ath11k
* 36 bit DMA mask support
* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
Power) SP and Very Low Power (VLP)
|
|
The kernel-doc script currently reports:
drivers/net/wireless/ath/ath10k/coredump.h:27: warning: Enum value 'ATH10K_FW_CRASH_DUMP_REGISTERS' not described in enum 'ath10k_fw_crash_dump_type'
drivers/net/wireless/ath/ath10k/coredump.h:27: warning: Enum value 'ATH10K_FW_CRASH_DUMP_CE_DATA' not described in enum 'ath10k_fw_crash_dump_type'
drivers/net/wireless/ath/ath10k/coredump.h:27: warning: Enum value 'ATH10K_FW_CRASH_DUMP_RAM_DATA' not described in enum 'ath10k_fw_crash_dump_type'
drivers/net/wireless/ath/ath10k/coredump.h:27: warning: Enum value 'ATH10K_FW_CRASH_DUMP_MAX' not described in enum 'ath10k_fw_crash_dump_type'
drivers/net/wireless/ath/ath10k/coredump.h:27: warning: Excess enum value 'ATH10K_FW_CRASH_DUMP_REGDUMP' description in 'ath10k_fw_crash_dump_type'
Fix these issues with the enum ath10k_fw_crash_dump_type kernel-doc.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240118-ath10k-kerneldoc-v1-5-99c7e8d95aad@quicinc.com
|
|
Currently kernel-doc reports:
drivers/net/wireless/ath/ath10k/htt.h:911: warning: Cannot understand * @brief target -> host TX completion indication message definition
on line 911 - I thought it was a doc line
This is because even though struct htt_data_tx_completion uses the
kernel-doc marker "/**", it doesn't actual use kernel-doc syntax for
the documentation. Rather than try to update this legacy driver
documentation to use kernel-doc style, just replace the comment
marker.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240118-ath10k-kerneldoc-v1-4-99c7e8d95aad@quicinc.com
|
|
Currently kernel-doc reports:
drivers/net/wireless/ath/ath10k/htt.h:1488: warning: cannot understand function prototype: 'struct htt_q_state_conf '
drivers/net/wireless/ath/ath10k/htt.h:1542: warning: cannot understand function prototype: 'struct htt_q_state '
Update the kernel-doc for these two structs to resolve the warnings.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240118-ath10k-kerneldoc-v1-3-99c7e8d95aad@quicinc.com
|
|
Currently kernel-doc reports the issue:
drivers/net/wireless/ath/ath10k/wmi-tlv.h:2363: warning: cannot understand function prototype: 'enum wmi_tlv_tx_pause_id '
Update the enum wmi_tlv_tx_pause_id documentation to fix this issue.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240118-ath10k-kerneldoc-v1-2-99c7e8d95aad@quicinc.com
|
|
Currently kernel-doc reports the following issues:
drivers/net/wireless/ath/ath10k/wmi.h:3033: warning: Enum value 'WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT' not described in enum 'wmi_10_4_feature_mask'
drivers/net/wireless/ath/ath10k/wmi.h:3033: warning: Enum value 'WMI_10_4_REPORT_AIRTIME' not described in enum 'wmi_10_4_feature_mask'
Update the kernel-doc for enum wmi_10_4_feature_mask to add the
missing documentation.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240118-ath10k-kerneldoc-v1-1-99c7e8d95aad@quicinc.com
|
|
ENOTSUPP is not a standard error code, don't use it. Replace with
EOPNOTSUPP instead.
No functional changes, compile tested only.
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240117080431.2907471-4-quic_periyasa@quicinc.com
|
|
We only have a single flag free, and before using that for
another mactime flag, instead refactor the mactime flags
to use a 2-bit field.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.d0e664832d14.I20c8900106f9bf81316bed778b1e3ce145785274@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In [1] it was identified that in ath10k_wmi_10_4_gen_tdls_peer_update()
the memset(skb->data, 0, sizeof(*cmd)) is unnecessary since function
ath10k_wmi_alloc_skb() already zeroes skb->data, so remove it.
No functional changes, compile tested only.
[1] https://lore.kernel.org/linux-wireless/626ae2e7-66f8-423b-b17f-e75c1a6d29b3@embeddedor.com/
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-6-92922d92fa2c@quicinc.com
|
|
Currently struct wmi_tdls_peer_capabilities defines:
struct wmi_channel peer_chan_list[1];
Per the guidance in [1] this should be a flexible array, and at one
point Gustavo was trying to fix this [2], but had questions about the
correct behavior when the associated peer_chan_len is 0.
I have been unable to determine if firmware requires that at least one
record be present even if peer_chan_len is 0. But since that is the
current behavior, follow the example from [3] and replace the
one-element array with a union that contains both a flexible array and
a single instance of the array element. This results in a struct that
has the same footprint as the original, so no other driver changes are
required.
No functional changes, compile tested only.
[1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays
[2] https://lore.kernel.org/linux-wireless/626ae2e7-66f8-423b-b17f-e75c1a6d29b3@embeddedor.com/
[3] https://lore.kernel.org/linux-wireless/202308301529.AC90A9EF98@keescook/
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-5-92922d92fa2c@quicinc.com
|
|
Currently both the wmi_bcn_tmpl_cmd and wmi_prb_tmpl_cmd structs
define:
u8 data[1];
Per the guidance in [1] both instances of this should be flexible
arrays. However during conversion it was discovered that neither of
these structs are actually used, so just remove them.
No functional changes, compile tested only.
[1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-4-92922d92fa2c@quicinc.com
|
|
Currently struct wmi_pdev_chanlist_update_event defines:
struct wmi_channel channel_list[1];
Per the guidance in [1] this should be a flexible array. However
during conversion it was discovered that this struct is not used, so
just remove the entire struct.
No functional changes, compile tested only.
[1] https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231213-wmi_host_mem_chunks_flexarray-v1-3-92922d92fa2c@quicinc.com
|
