summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Expand)AuthorFilesLines
2025-12-07serial: amba-pl011: prefer dma_mapping_error() over explicit address checkingMiaoqian Lin1-1/+1
2025-12-07serial: 8250_dw: handle reset control deassert errorArtem Shimko1-1/+3
2025-12-07serial: 8250_dw: Use devm_add_action_or_reset()Andy Shevchenko1-32/+31
2025-10-29serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018Florian Eckert1-0/+11
2025-10-19serial: stm32: allow selecting console when the driver is moduleRaphael Gallais-Pou1-1/+1
2025-10-02serial: sc16is7xx: fix bug in flow control levels initHugo Villeneuve1-12/+2
2025-08-28serial: 8250: fix panic due to PSLVERRYunhui Cui1-2/+1
2025-08-28pch_uart: Fix dma_sync_sg_for_device() nents valueThomas Fourier1-1/+1
2025-07-10tty: serial: uartlite: register uart driver in initJakub Lewalski1-13/+12
2025-06-27serial: sh-sci: Increment the runtime usage counter for the earlycon deviceClaudiu Beznea1-0/+16
2025-06-27serial: sh-sci: Clean sci_ports[0] after at earlycon exitClaudiu Beznea1-2/+30
2025-06-27serial: sh-sci: Move runtime PM enable to sci_probe_single()Claudiu Beznea1-18/+6
2025-06-27serial: sh-sci: Check if TX data was written to device in .tx_empty()Claudiu Beznea1-0/+29
2025-06-27serial: Fix potential null-ptr-deref in mlb_usio_probe()Henry Martin1-1/+4
2025-05-02serial: sifive: lock port in startup()/shutdown() callbacksRyo Takakura1-0/+6
2025-04-10tty: serial: fsl_lpuart: disable transmitter before changing RS485 related re...Sherry Sun1-0/+17
2025-04-10tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platformSherry Sun1-4/+4
2025-04-10serial: 8250_dma: terminate correct DMA in tx_dma_flush()John Keeping1-1/+1
2025-04-10tty: serial: 8250: Add Brainboxes XC devicesCameron Williams1-0/+30
2025-04-10tty: serial: 8250: Add some more device IDsCameron Williams1-0/+16
2025-03-13serial: 8250_pci: add support for ASIX AX99100Jiaqing Zhao1-0/+10
2025-03-13serial: 8250: Fix fifo underflow on flushJohn Keeping3-0/+27
2025-03-13tty: xilinx_uartps: split sysrq handlingSean Anderson1-6/+4
2025-03-13serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in...Claudiu Beznea1-0/+23
2025-03-13serial: sh-sci: Drop __initdata macro for port_cfgClaudiu Beznea1-1/+1
2024-12-14serial: amba-pl011: fix build regressionArnd Bergmann1-0/+2
2024-12-14serial: amba-pl011: Fix RX stall when DMA is usedKartik Rajput1-0/+5
2024-12-14serial: amba-pl011: Use port lock wrappersThomas Gleixner1-36/+36
2024-12-14serial: 8250: omap: Move pm_runtime_get_syncBin Liu1-2/+2
2024-12-14Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"Greg Kroah-Hartman1-28/+0
2024-12-14serial: sh-sci: Clean sci_ports[0] after at earlycon exitClaudiu Beznea1-0/+28
2024-11-01serial: protect uart_port_dtr_rts() in uart_shutdown() tooJiri Slaby (SUSE)1-7/+9
2024-10-17tty: rp2: Fix reset with non forgiving PCIe host bridgesFlorian Fainelli1-1/+1
2024-08-19serial: core: check uartclk for zero to avoid divide by zeroGeorge Kennedy1-0/+8
2024-07-05serial: 8250_omap: Fix Errata i2310 with RX FIFO level checkUdit Kumar1-1/+2
2024-07-05tty: mcf: MCF54418 has 10 UARTSJean-Michel Hautbois1-1/+1
2024-07-05serial: 8250_omap: Implementation of Errata i2310Udit Kumar1-5/+20
2024-07-05serial: stm32: rework RX over DMAErwan Le Ray2-53/+165
2024-07-05serial: exar: adding missing CTI and Exar PCI idsParker Newman1-0/+42
2024-07-05serial: imx: Introduce timeout when waiting on transmitter emptyEsben Haabendal1-3/+4
2024-07-05serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ levelDoug Brown1-0/+1
2024-07-05serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescalerHugo Villeneuve1-5/+18
2024-07-05serial: sc16is7xx: replace hardcoded divisor value with BIT() macroHugo Villeneuve1-1/+1
2024-06-16serial: sh-sci: protect invalidating RXDMA on shutdownWolfram Sang1-0/+5
2024-06-16serial: sc16is7xx: add proper sched.h include for sched_set_fifo()Hugo Villeneuve1-1/+1
2024-06-16serial: max3100: Fix bitwise typesAndy Shevchenko1-1/+4
2024-06-16serial: max3100: Update uart_driver_registered on driver removalAndy Shevchenko1-1/+3
2024-06-16serial: max3100: Lock port->lock when calling uart_handle_cts_change()Andy Shevchenko1-1/+12
2024-06-16serial: 8250_bcm7271: use default_mux_rate if possibleDoug Berger1-41/+60
2024-05-25serial: kgdboc: Fix NMI-safety problems from keyboard reset codeDaniel Thompson1-1/+29
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-25 04:26:11 +0000