summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Expand)AuthorFilesLines
2023-03-11tty: serial: fsl_lpuart: disable the CTS when send break signalSherry Sun1-2/+22
2023-02-22serial: 8250_dma: Fix DMA Rx rearm raceIlpo Järvinen1-2/+10
2023-02-22serial: 8250_dma: Fix DMA Rx completion raceIlpo Järvinen1-1/+13
2023-01-24serial: atmel: fix incorrect baudrate setupTobias Schramm1-7/+1
2023-01-24serial: pch_uart: Pass correct sg to dma_unmap_sg()Ilpo Järvinen1-1/+1
2023-01-18tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't startedDmitry Osipenko1-19/+16
2023-01-18serial: sunsab: Fix error handling in sunsab_init()Yuan Can1-1/+7
2023-01-18serial: altera_uart: fix locking in polling modeGabriel Somlo1-2/+3
2023-01-18tty: serial: altera_uart_{r,t}x_chars() need only uart_portJiri Slaby1-6/+4
2023-01-18tty: serial: clean up stop-tx part in altera_uart_tx_chars()Jiri Slaby1-4/+2
2023-01-18serial: pch: Fix PCI device refcount leak in pch_request_dma()Xiongfeng Wang1-0/+4
2023-01-18serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.delisun1-1/+10
2023-01-18serial: amba-pl011: avoid SBSA UART accessing DMACR registerJiamei Xie1-0/+3
2023-01-18serial: tegra: Read DMA status before terminatingKartik1-2/+4
2023-01-18tty: serial: tegra: Activate RX DMA transfer by requestDmitry Osipenko1-32/+46
2022-12-08serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()Lukas Wunner1-3/+4
2022-11-25serial: 8250: Flush DMA Rx on RLSIIlpo Järvinen1-2/+1
2022-11-25serial: 8250_lpss: Configure DMA also w/o DMA filterIlpo Järvinen1-4/+11
2022-11-25serial: 8250: Fall back to non-DMA Rx if IIR_RDI occursIlpo Järvinen1-0/+4
2022-11-25serial: imx: Add missing .thaw_noirq hookShawn Guo1-0/+1
2022-11-25serial: 8250: omap: Flush PM QOS work on removeTony Lindgren1-0/+1
2022-11-25serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()Tony Lindgren1-0/+5
2022-11-25serial: 8250_omap: remove wait loop from Errata i202 workaroundMatthias Schiffer1-17/+0
2022-11-10parisc: Make 8250_gsc driver dependend on CONFIG_PARISCHelge Deller1-1/+1
2022-10-26serial: 8250: Fix restoring termios speed after suspendPali Rohár1-1/+6
2022-10-26tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdownSherry Sun1-0/+2
2022-10-26drivers: serial: jsm: fix some leaks in probeDan Carpenter1-1/+2
2022-10-26tty: xilinx_uartps: Fix the ignore_statusShubhrajyoti Datta1-0/+2
2022-09-28serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accountingIlpo Järvinen1-1/+1
2022-09-28serial: tegra: Use uart_xmit_advance(), fixes icount.tx accountingIlpo Järvinen1-3/+2
2022-09-28tty: serial: atmel: Preserve previous USART mode if RS485 disabledSergiu Moga1-3/+1
2022-09-28serial: atmel: remove redundant assignment in rs485_configLino Sanfilippo1-3/+1
2022-09-28tty/serial: atmel: RS485 & ISO7816: wait for TXRDY before sending dataCodrin.Ciubotariu@microchip.com1-7/+19
2022-09-15tty: serial: lpuart: disable flow control while waiting for the transmit engi...Sherry Sun1-0/+1
2022-09-15serial: fsl_lpuart: RS485 RTS polariy is inverseShenwei Wang1-2/+2
2022-08-25tty: serial: Fix refcount leak bug in ucc_uart.cLiang He1-0/+2
2022-08-25serial: 8250_dw: Store LSR into lsr_saved_flags in dw8250_tx_wait_empty()Ilpo Järvinen1-0/+3
2022-08-25serial: mvebu-uart: uart2 error bits clearingNarendra Hadke1-0/+11
2022-07-29tty: drivers/tty/, stop using tty_schedule_flip()Jiri Slaby1-1/+1
2022-07-29serial: mvebu-uart: correctly report configured baudrate valuePali Rohár1-12/+13
2022-07-21serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottleIlpo Järvinen1-2/+21
2022-07-21serial: stm32: Clear prev values before setting RTS delaysIlpo Järvinen1-0/+2
2022-07-21serial: 8250: fix return error code in serial8250_request_std_resource()Yi Yang1-1/+3
2022-07-21tty: serial: samsung_tty: set dma burst_size to 1Chanho Park1-3/+2
2022-06-22serial: 8250: Store to lsr_save_flags after lsr readIlpo Järvinen1-0/+2
2022-06-14serial: msm_serial: disable interrupts in __msm_console_write()John Ogness1-0/+5
2022-06-14drivers: tty: serial: Fix deadlock in sa1100_set_termios()Duoming Zhou1-2/+2
2022-06-14tty: Fix a possible resource leak in icom_probeHuang Guobin1-1/+1
2022-06-14serial: stm32-usart: Correct CSIZE, bits, and parityIlpo Järvinen1-3/+12
2022-06-14serial: st-asc: Sanitize CSIZE and correct PARENB for CS7Ilpo Järvinen1-0/+4
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-14 10:16:38 +0000