summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2024-10-08drm/amdgpu: Drop unused fence argument from amdgpu_vmid_grab_usedTvrtko Ursulin1-4/+2
Fence argument is unused so lets drop it. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu: partially revert powerplay `__counted_by` changesAlex Deucher1-13/+13
Partially revert commit 0ca9f757a0e2 ("drm/amd/pm: powerplay: Add `__counted_by` attribute for flexible arrays") The count attribute for these arrays does not get set until after the arrays are allocated and populated leading to false UBSAN warnings. Fixes: 0ca9f757a0e2 ("drm/amd/pm: powerplay: Add `__counted_by` attribute for flexible arrays") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3662 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdkfd: SMI report dropped event countPhilip Yang1-4/+23
Add new SMI event to report the dropped event count. When the event kfifo is full, drop count is not zero, or no enough space left to store the event message, increase drop count. After reading event out from kfifo, if event was dropped, drop_count is not zero, generate a dropped event record and reset drop count to zero. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu: Add sysfs interfaces for NPS modeLijo Lazar2-16/+104
Add a sysfs interface to see available NPS modes to switch to - cat /sys/bus/pci/devices/../available_memory_paritition Make the current_memory_partition sysfs node read/write for requesting a new NPS mode. The request is only cached and at a later point a driver unload/reload is required to switch to the new NPS mode. Ex: echo NPS1 > /sys/bus/pci/devices/../current_memory_paritition echo NPS4 > /sys/bus/pci/devices/../current_memory_paritition The above interfaces will be available only if the SOC supports more than one NPS mode. Also modify the current memory partition sysfs logic to be more generic. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu: Add gmc interface to request NPS modeLijo Lazar4-0/+24
Add a common interface in GMC to request NPS mode through PSP. Also add a variable in hive and gmc control to track the last requested mode. Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu/gfx10: Apply Isolation Enforcement to GFX & Compute ringsSrinivasan Shanmugam1-0/+4
This commit applies isolation enforcement to the GFX and Compute rings in the gfx_v10_0 module. The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be called when a ring begins and ends its use, respectively. `amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring begins its use. This function cancels any scheduled `enforce_isolation_work` and, if necessary, signals the Kernel Fusion Driver (KFD) to stop the runqueue. `amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends its use. This function schedules `enforce_isolation_work` to be run after a delay. These functions are part of the Enforce Isolation Handler, which enforces shader isolation on AMD GPUs to prevent data leakage between different processes. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: fix hibernate entry for DCN35+Hamza Mahfooz1-3/+4
Since, two suspend-resume cycles are required to enter hibernate and, since we only need to enable idle optimizations in the first cycle (which is pretty much equivalent to s2idle). We can check in_s0ix, to prevent the system from entering idle optimizations before it actually enters hibernate (from display's perspective). Also, call dc_set_power_state() before dc_allow_idle_optimizations(), since it's safer to do so because dc_set_power_state() writes to DMUB. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Fetch the EDID from _DDC if available for eDPMario Limonciello2-3/+67
Some manufacturers have intentionally put an EDID that differs from the EDID on the internal panel on laptops. Attempt to fetch this EDID if it exists and prefer it over the EDID that is provided by the panel. If a user prefers to use the EDID from the panel, offer a DC debugging parameter that would disable this. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: remove redundant freesync parser for DPMelissa Wen1-66/+4
When updating connector under drm_edid infrastructure, many calculations and validations are already done and become redundant inside AMD driver. Remove those driver-specific code in favor of the DRM common code. Signed-off-by: Melissa Wen <mwen@igalia.com> Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: always call connector_update when parsing freesync_capsMelissa Wen1-2/+2
Update connector caps with drm_edid data before parsing info for freesync. Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: switch to setting physical address directlyMelissa Wen1-3/+3
Connectors have source physical address available in display info. Use drm_dp_cec_attach() to use it instead of parsing the EDID again. Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: switch amdgpu_dm_connector to use struct drm_edidMelissa Wen4-90/+84
Replace raw edid handling (struct edid) with the opaque EDID type (struct drm_edid) on amdgpu_dm_connector for consistency. It may also prevent mismatch of approaches in different parts of the driver code. Signed-off-by: Melissa Wen <mwen@igalia.com> Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu: Add PSP interface for NPS switchRajneesh Bhardwaj3-3/+37
Implement PSP ring command interface for memory partitioning on the fly on the supported asics. Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: 3.2.304Aric Cyr1-1/+1
This DC patchset brings improvements in multiple areas. In summary, we highlight: - Improvements to seemless boot. - Adjustments for DSC dock. - DML improvements - DMCUB fixes for D0/D3 and new register offset. - Code cleanup. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Initialize new backlight_level_params structureKaitlyn Tse6-14/+20
[Why] Initialize the new backlight_level_params structure as part of the ABC framework, the information in this structure is needed to be passed down to the DMCUB to identify the backlight control type, to adjust the backlight of the panel and to perform any required conversions from PWM to nits or vice versa. [How] Created initial framework of the backlight_level_params struct and modified existing functions to include the new structure. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Initialize replay_config varKaitlyn Tse1-2/+1
[Why] Uninitialized variables could cause some bits to be set, thus enabling features unintentionally. [How] Initialize replay_config variable to avoid future issues. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Remove redundant assignmentsAlex Hung6-24/+0
[WHAT & HOW] log2_blk_height and log2_blk_width are assigned to 0 and then immediately are updated to other values. The assignments to zero are redudant and removed. This fixes 18 UNUSED_VALUE issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Remove unnecessary assignmentsAlex Hung7-21/+0
[WHAT & HOW] TimeForFetchingMetaPTE, TimeForFetchingRowInVBlank and LinesToRequestPrefetchPixelData are local variables. They are freed when CalculatePrefetchSchedule() ends and need not clearing explicitly. This fixes 21 UNUSED_VALUE issues reported by Coverity. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Add DMUB debug offsetTaimur Hassan1-0/+5
Add DMUB offset for future use. Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Update Interface to Check UCLK DPMAustin Zheng4-1/+33
[Why] Videos using YUV420 format may result in high power being used. Disabling MPO may result in lower power usage. Update interface that can be used to check power profile of a dc_state. [How] Add helper functions that can be used to determine power level: - get power profile after a dc_state has undergone full validation Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Move Link Encoder Assignment Out Of dc_global_validateAustin Zheng2-8/+8
Assigning link encoder is not relevant to validating bandwidth so move the logic outside of dc_global_validate. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Allow Latency Increase For Last StrategyAustin Zheng1-0/+1
[Why] Playing 1080p video on 4k60 timing uses UCLK DPM5 and mode support determines that p-state switching is not supported. [How] Allow DML to increase latency as the last strategy so strategies such as VBlank p-state switching may become possible Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Skip Invalid Streams from DSC PolicyFangzhi Zuo1-1/+12
Streams with invalid new connector state should be elimiated from dsc policy. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Align static screen idle worker with IPX modeRoman Li1-0/+1
[Why] Idle worker thread serves for periodic detection of HPD while system is in IPS2. Currently it is used in headless and static screen scenarios. IPX can be configured not to execute IPS2 for static screen. In this case idle worker is redundant. [How] Only use periodic detection for static screen if IPS is fully enabled. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: calculate final viewport before TAP optimizationYihan Zhu1-26/+23
Viewport size excess surface size observed sometime with some timings or resizing the MPO video window to cause MPO unsupported. Calculate final viewport size first with a 100x100 dummy viewport to get the max TAP support and then re-run final viewport calculation if TAP value changed. Removed obsolete preliminary viewport calculation for TAP validation. Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: fix a memleak issue when driver is removedAurabindo Pillai3-15/+33
Running "modprobe amdgpu" the second time (followed by a modprobe -r amdgpu) causes a call trace like: [ 845.212163] Memory manager not clean during takedown. [ 845.212170] WARNING: CPU: 4 PID: 2481 at drivers/gpu/drm/drm_mm.c:999 drm_mm_takedown+0x2b/0x40 [ 845.212177] Modules linked in: amdgpu(OE-) amddrm_ttm_helper(OE) amddrm_buddy(OE) amdxcp(OE) amd_sched(OE) drm_exec drm_suballoc_helper drm_display_helper i2c_algo_bit amdttm(OE) amdkcl(OE) cec rc_core sunrpc qrtr intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi edac_mce_amd snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_usb_audio snd_hda_codec snd_usbmidi_lib kvm_amd snd_hda_core snd_ump mc snd_hwdep kvm snd_pcm snd_seq_midi snd_seq_midi_event irqbypass crct10dif_pclmul snd_rawmidi polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 snd_seq aesni_intel crypto_simd snd_seq_device cryptd snd_timer mfd_aaeon asus_nb_wmi eeepc_wmi joydev asus_wmi snd ledtrig_audio sparse_keymap ccp wmi_bmof input_leds k10temp i2c_piix4 platform_profile rapl soundcore gpio_amdpt mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid ahci xhci_pci igc crc32_pclmul libahci xhci_pci_renesas video [ 845.212284] wmi [last unloaded: amddrm_ttm_helper(OE)] [ 845.212290] CPU: 4 PID: 2481 Comm: modprobe Tainted: G W OE 6.8.0-31-generic #31-Ubuntu [ 845.212296] RIP: 0010:drm_mm_takedown+0x2b/0x40 [ 845.212300] Code: 1f 44 00 00 48 8b 47 38 48 83 c7 38 48 39 f8 75 09 31 c0 31 ff e9 90 2e 86 00 55 48 c7 c7 d0 f6 8e 8a 48 89 e5 e8 f5 db 45 ff <0f> 0b 5d 31 c0 31 ff e9 74 2e 86 00 66 0f 1f 84 00 00 00 00 00 90 [ 845.212302] RSP: 0018:ffffb11302127ae0 EFLAGS: 00010246 [ 845.212305] RAX: 0000000000000000 RBX: ffff92aa5020fc08 RCX: 0000000000000000 [ 845.212307] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 845.212309] RBP: ffffb11302127ae0 R08: 0000000000000000 R09: 0000000000000000 [ 845.212310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004 [ 845.212312] R13: ffff92aa50200000 R14: ffff92aa5020fb10 R15: ffff92aa5020faa0 [ 845.212313] FS: 0000707dd7c7c080(0000) GS:ffff92b93de00000(0000) knlGS:0000000000000000 [ 845.212316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 845.212318] CR2: 00007d48b0aee200 CR3: 0000000115a58000 CR4: 0000000000f50ef0 [ 845.212320] PKRU: 55555554 [ 845.212321] Call Trace: [ 845.212323] <TASK> [ 845.212328] ? show_regs+0x6d/0x80 [ 845.212333] ? __warn+0x89/0x160 [ 845.212339] ? drm_mm_takedown+0x2b/0x40 [ 845.212344] ? report_bug+0x17e/0x1b0 [ 845.212350] ? handle_bug+0x51/0xa0 [ 845.212355] ? exc_invalid_op+0x18/0x80 [ 845.212359] ? asm_exc_invalid_op+0x1b/0x20 [ 845.212366] ? drm_mm_takedown+0x2b/0x40 [ 845.212371] amdgpu_gtt_mgr_fini+0xa9/0x130 [amdgpu] [ 845.212645] amdgpu_ttm_fini+0x264/0x340 [amdgpu] [ 845.212770] amdgpu_bo_fini+0x2e/0xc0 [amdgpu] [ 845.212894] gmc_v12_0_sw_fini+0x2a/0x40 [amdgpu] [ 845.213036] amdgpu_device_fini_sw+0x11a/0x590 [amdgpu] [ 845.213159] amdgpu_driver_release_kms+0x16/0x40 [amdgpu] [ 845.213302] devm_drm_dev_init_release+0x5e/0x90 [ 845.213305] devm_action_release+0x12/0x30 [ 845.213308] release_nodes+0x42/0xd0 [ 845.213311] devres_release_all+0x97/0xe0 [ 845.213314] device_unbind_cleanup+0x12/0x80 [ 845.213317] device_release_driver_internal+0x230/0x270 [ 845.213319] ? srso_alias_return_thunk+0x5/0xfbef5 This is caused by lost memory during early init phase. First time driver is removed, memory is freed but when second time the driver is inserted, VBIOS dmub is not active, since the PSP policy is to retain the driver loaded version on subsequent warm boots. Hence, communication with VBIOS DMUB fails. Fix this by aborting further communication with vbios dmub and release the memory immediately. Fixes: f59549c7e705 ("drm/amd/display: free bo used for dmub bounding box") Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Clear update flags after update has been appliedJosip Pavic1-11/+34
[Why] Since the surface/stream update flags aren't cleared after applying updates, those same updates may be applied again in a future call to update surfaces/streams for surfaces/streams that aren't actually part of that update (i.e. applying an update for one surface/stream can trigger unintended programming on a different surface/stream). For example, when an update results in a call to program_front_end_for_ctx, that function may call program_pipe on all pipes. If there are surface update flags that were never cleared on the surface some pipe is attached to, then the same update will be programmed again. [How] Clear the surface and stream update flags after applying the updates. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3441 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3616 Cc: Melissa Wen <mwen@igalia.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: update sr_exit latency for z8Charlene Liu1-2/+2
This is based on real asic performance result. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Remove programming outstanding updates for dcn35Dillon Varone2-2/+0
[WHY&HOW] Programming outstanding updates is causing hangs on dcn35, so remove for now. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Fix low black values by increasing errorPeterson2-30/+20
[WHY] Regamma resolution for the first few black levels can have problems for calibration. [HOW] HW LUT is divided into N power-of-2 regions each with K segments. For SDR mode we set min point at 2^-10 and increments of 2^-13. It's generally more than 8-bit SDR needs, but some calibration tools and API use 12-bit curves. The fix shifts starting point to 2^-12 and starting increments at 2^-16. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Peterson <peterson.guo@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Noitfy DMCUB of D0/D3 state in hardware initJinZe.Xu1-0/+1
[Why] Missing a dc_dmub_srv_notify_fw_dc_power_state in driver init. [How] Notify DMCUB of D0 state in hardware_init. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Display lost signal on playing videopo-tchen1-3/+14
[Why] When Source extend the vblank to reach the minimum panel refresh rate, the vtotal length could have 1 line longer than the maximum supported vtotal. The reason is we optimized the vtotal/refresh-rate calculation to get more accurate vtotal number by rounding the calculation result. But when the target refresh rate is the minimum refresh rate, the vtotal result could be round up and over the maximum supported vtotal. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: po-tchen <robin.chen@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Fix garbage or black screen when resetting otgZhongwei2-0/+26
[Why] For some EDP to MIPI panel, disabling OTG when link is alive like boot case, the converter might output garbage or show no display because our GPU is not sending required pixel data. Alos Dig fifo underflow was found which might cause garbage, when resetting otg for other types of EDP panels. [How] Skipping resetting OTG if the dig fifo is on. Make sure that the otg for the pipe is the one that the dig fifo is selecting via the FE mask. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Assign socclk in dmlSridevi Arvindekar1-0/+1
Assign socclk_khz value from dcn4x. Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: force TBT4 dock dsc onFudongwang3-0/+23
[why] TBT4 dock have bandwidth limitation, need dsc always on to support all modes. [how] force dsc always on when detect TBT4 dock. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Fudongwang <Fudong.Wang@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Revert commit Update Interface to Check UCLK DPMAustin Zheng5-36/+1
This reverts commit b8d046985c2dc41a0e264a391da4606099f8d44f. Reverting as regression discovered on certain systems and golden values need to updated. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Flip All Planes Under OTG Master When Flip ImmediateAustin Zheng1-0/+33
[Why] The MPO plane will receive a flip but desktop plane may not receive a flip when GSL is enabled. As a result, system will be stuck waiting for a flip that was never sent. [How] Set update address update flag of all flip_immediate planes if there are multiple planes. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: skip disable CRTC in seemless bootup caseFudongwang1-1/+3
Resync FIFO is a workaround to write the same value to DENTIST_DISPCLK_CNTL register after programming OTG_PIXEL_RATE_DIV register, in case seemless boot, there is no OTG_PIXEL_RATE_DIV register update, so skip CRTC disable when resync FIFO to avoid random FIFO error and garbage. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Fudongwang <Fudong.Wang@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Unify blank_phantom and blank_pixel_dataAustin Zheng6-74/+6
[Why] dcn32_blank_phantom() does not consider the subVP+ODM case when blanking. Only one of the pipes will get blanked. Remaining pipes are not blanked. Will cause underflow in the phantom pipe when enabling the CRTC. [How] Use blank_pixel_data() instead of blank_phantom(). remove dcn32_blank_phantom() since logic is identical. Different DPG dimensions get programmed when blanking phantom pipes. Previously had phantom pipes use DPG dimensions of the main stream. Now use DPG dimensions of the phantom streams Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/radeon: add late_register for connectorWu Hoi Pok2-7/+19
The patch is to solve null dereference in 'aux.dev', which is introduced in recent radeon rework. By having 'late_register', the connector should be registered after 'drm_dev_register' automatically, where in before it is the opposite. Fixes: 90985660ba48 ("drm/radeon: remove load callback from kms_driver") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3665 Tested-by: Hans de Goede <hdegoede@redhat.com> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Wu Hoi Pok <wuhoipok@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu/gfx11: Apply Isolation Enforcement to GFX & Compute ringsSrinivasan Shanmugam1-0/+4
This commit applies isolation enforcement to the GFX and Compute rings in the gfx_v11_0 module. The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be called when a ring begins and ends its use, respectively. `amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring begins its use. This function cancels any scheduled `enforce_isolation_work` and, if necessary, signals the Kernel Fusion Driver (KFD) to stop the runqueue. `amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends its use. This function schedules `enforce_isolation_work` to be run after a delay. These functions are part of the Enforce Isolation Handler, which enforces shader isolation on AMD GPUs to prevent data leakage between different processes. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu/gfx12: Implement cleaner shader support for GFX12 hardwareSrinivasan Shanmugam1-2/+25
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the gfx_v12_0 module. This packet is used to emit the cleaner shader, which is used to clear GPU memory before it's reused, helping to prevent data leakage between different processes. Finally, the patch updates the ring function structures to include the new gfx_v12_0_ring_emit_cleaner_shader function. This allows the cleaner shader to be emitted as part of the ring's operations. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdkfd: Copy wave state only for compute queuePhilip Yang1-1/+4
get_wave_state is not defined for sdma queue, copy_context_work_handler calls it for sdma queue will crash. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdkfd: Increase SMI event fifo sizePhilip Yang1-3/+3
SMI event fifo size 1KB was enough to report GPU vm fault or reset event, but could drop the more frequent SVM migration events. Increase kfifo size to 8KB to store about 100 migrate events, less chance to drop the migrate events if lots of migration happened in the short period of time. Add KFD prefix to the macro name. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu: Fix spelling mistake "initializtion" -> "initialization"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdkfd: Output migrate end event if migrate failedPhilip Yang4-14/+15
If page migration failed, also output migrate end event to match with migrate start event, with failure error_code added to the end of the migrate message macro. This will not break uAPI because application uses old message macro sscanf drop and ignore the error_code. Output GPU page fault restore end event if migration failed. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu/gfx11: Implement cleaner shader support for GFX11 hardwareSrinivasan Shanmugam1-4/+37
The patch modifies the gfx_v11_0_kiq_set_resources function to write the cleaner shader's memory controller address to the ring buffer. It also adds a new function, gfx_v11_0_ring_emit_cleaner_shader, which emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer. This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the gfx_v11_0 module. This packet is used to emit the cleaner shader, which is used to clear GPU memory before it's reused, helping to prevent data leakage between different processes. Finally, the patch updates the ring function structures to include the new gfx_v11_0_ring_emit_cleaner_shader function. This allows the cleaner shader to be emitted as part of the ring's operations. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/pm: use pm_runtime_get_if_active for debugfs gettersPierre-Eric Pelloux-Prayer1-69/+69
Don't wake up the GPU for reading pm values. Instead, take a runtime powermanagement ref when trying to read it if and only if the GPU is already awake. This avoids spurious wake ups (eg: from applets). We use pm_runtime_get_if_in_active because we care about "is the GPU awake?" not about "is the GPU awake and something else prevents suspend?". Tested-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu: change the comment from handle to ip_blockSunil Khatri24-128/+128
htmldoc generation depend upon the input arguments etc to generate the document. After update of handle to ip_block then update needs in comments too to fix the warnings. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202410021904.YyGjlpk9-lkp@intel.com Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amdgpu/gfx10: Implement cleaner shader support for GFX10 hardwareSrinivasan Shanmugam1-4/+35
The patch modifies the gfx_v10_0_kiq_set_resources function to write the cleaner shader's memory controller address to the ring buffer. It also adds a new function, gfx_v10_0_ring_emit_cleaner_shader, which emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer. This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the gfx_v10_0 module. This packet is used to emit the cleaner shader, which is used to clear GPU memory before it's reused, helping to prevent data leakage between different processes. Finally, the patch updates the ring function structures to include the new gfx_v10_0_ring_emit_cleaner_shader function. This allows the cleaner shader to be emitted as part of the ring's operations. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-05-21 21:06:53 +0000