| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
arch_init_invariance_cppc() is called at the end of
acpi_cppc_processor_probe() in order to configure frequency invariance
based upon the values from _CPC.
This however doesn't work on AMD CPPC shared memory designs that have
AMD preferred cores enabled because _CPC needs to be analyzed from all
cores to judge if preferred cores are enabled.
This issue manifests to users as a warning since commit 21fb59ab4b97
("ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn"):
```
Could not retrieve highest performance (-19)
```
However the warning isn't the cause of this, it was actually
commit 279f838a61f9 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") which exposed the issue.
To fix this problem, change arch_init_invariance_cppc() into a new weak
symbol that is called at the end of acpi_processor_driver_init().
Each architecture that supports it can declare the symbol to override
the weak one.
Define it for x86, in arch/x86/kernel/acpi/cppc.c, and for all of the
architectures using the generic arch_topology.c code.
Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219431
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241104222855.3959267-1-superm1@kernel.org
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The following BUG was triggered:
=============================
[ BUG: Invalid wait context ]
6.12.0-rc2-XXX #406 Not tainted
-----------------------------
kworker/1:1/62 is trying to lock:
ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370
other info that might help us debug this:
context-{5:5}
2 locks held by kworker/1:1/62:
#0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50
#1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280
stack backtrace:
CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 #406
Workqueue: 0x0 (events)
Call trace:
dump_backtrace+0xa4/0x130
show_stack+0x20/0x38
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x28
__lock_acquire+0x480/0x1ad8
lock_acquire+0x114/0x310
_raw_spin_lock+0x50/0x70
cpc_write+0xcc/0x370
cppc_set_perf+0xa0/0x3a8
cppc_cpufreq_fast_switch+0x40/0xc0
cpufreq_driver_fast_switch+0x4c/0x218
sugov_update_shared+0x234/0x280
update_load_avg+0x6ec/0x7b8
dequeue_entities+0x108/0x830
dequeue_task_fair+0x58/0x408
__schedule+0x4f0/0x1070
schedule+0x54/0x130
worker_thread+0xc0/0x2e8
kthread+0x130/0x148
ret_from_fork+0x10/0x20
sugov_update_shared() locks a raw_spinlock while cpc_write() locks a
spinlock.
To have a correct wait-type order, update rmw_lock to a raw spinlock and
ensure that interrupts will be disabled on the CPU holding it.
Fixes: 60949b7b8054 ("ACPI: CPPC: Fix MASK_VAL() usage")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://patch.msgid.link/20241028125657.1271512-1-pierre.gondois@arm.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of new lines of code, the most visible change here is
the addition of hybrid CPU capacity scaling support to the
intel_pstate driver. Next are the amd-pstate driver changes related to
the calculation of the AMD boost numerator and preferred core
detection.
As far as new hardware support is concerned, the intel_idle driver
will now handle Granite Rapids Xeon processors natively, the
intel_rapl power capping driver will recognize family 1Ah of AMD
processors and Intel ArrowLake-U chipos, and intel_pstate will handle
Granite Rapids and Sierra Forest chips in the out-of-band (OOB) mode.
Apart from the above, there is a usual collection of assorted fixes
and code cleanups in many places and there are tooling updates.
Specifics:
- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef)
- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada)
- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki)
- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson)
- Several OF related cleanups in cpufreq drivers (Rob Herring)
- Enable COMPILE_TEST for ARM drivers (Rob Herrring)
- Introduce quirks for syscon failures and use socinfo to get
revision for TI cpufreq driver (Dhruva Gole, Nishanth Menon)
- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar)
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing)
- Make amd-pstate validate return of any attempt to update EPP
limits, which fixes the masking hardware problems (Mario
Limonciello)
- Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
(Mario Limonciello)
- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello)
- Add extra unit test coverage for mode state machine (Mario
Limonciello)
- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang
Liu)
- Add Granite Rapids Xeon support to intel_idle (Artem Bityutskiy)
- Disable promotion to C1E on Jasper Lake and Elkhart Lake in
intel_idle (Kai-Heng Feng)
- Use scoped device node handling to fix missing of_node_put() and
simplify walking OF children in the riscv-sbi cpuidle driver
(Krzysztof Kozlowski)
- Remove dead code from cpuidle_enter_state() (Dhruva Gole)
- Change an error pointer to NULL to fix error handling in the
intel_rapl power capping driver (Dan Carpenter)
- Fix off by one in get_rpi() in the intel_rapl power capping driver
(Dan Carpenter)
- Add support for ArrowLake-U to the intel_rapl power capping driver
(Sumeet Pawnikar)
- Fix the energy-pkg event for AMD CPUs in the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Add support for AMD family 1Ah processors to the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Remove unused stub for saveable_highmem_page() and remove
deprecated macros from power management documentation (Andy
Shevchenko)
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo)
- Update the maintainers information for the
operating-points-v2-ti-cpu DT binding (Dhruva Gole)
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring)
- Add missing MODULE_DESCRIPTION() macros to devfreq governors (Jeff
Johnson)
- Use devm_clk_get_enabled() in the exynos-bus devfreq driver (Anand
Moon)
- Use of_property_present() instead of of_get_property() in the
imx-bus devfreq driver (Rob Herring)
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin)
- Make cpupower display residency value in idle-info (Aboorva
Devarajan)
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV)
- Add SWIG support to cpupower (John B. Wyatt IV)"
* tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
PM: hibernate: Remove unused stub for saveable_highmem_page()
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
...
|
|
Merge ACPI backlight (video) driver update, ACPI resource management
updates, an ACPI processor aggregator device (PAD) driver fix, and
miscellaneous ACPI updates for 6.12-rc1:
- Add force_vendor quirk for Panasonic Toughbook CF-18 in the ACPI
backlight driver (Hans de Goede).
- Make the DMI checks related to backlight handling on Lenovo Yoga
Tab 3 X90F less strict (Hans de Goede).
- Enforce native backlight handling on Apple MacbookPro9,2 (Esther
Shimanovich).
- Add IRQ override quirks for Asus Vivobook Go E1404GAB and MECHREV
GM7XG0M, and refine the TongFang GMxXGxx quirk (Li Chen, Tamim Khan,
Werner Sembach).
- Fix crash in exit_round_robin() in the ACPI processor aggregator
device (PAD) driver (Seiji Nishikawa).
- Define and use symbols for device and class name lengths in the ACPI
bus type code and make the code use strscpy() instead of strcpy() in
several places (Muhammad Qasim Abdul Majeed).
* acpi-video:
ACPI: video: Add force_vendor quirk for Panasonic Toughbook CF-18
ACPI: x86: Make Lenovo Yoga Tab 3 X90F DMI match less strict
ACPI: video: Make Lenovo Yoga Tab 3 X90F DMI match less strict
ACPI: video: force native for Apple MacbookPro9,2
* acpi-resource:
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: resource: Skip IRQ override on Asus Vivobook Go E1404GAB
ACPI: resource: Do IRQ override on MECHREV GM7XG0M
* acpi-pad:
ACPI: PAD: fix crash in exit_round_robin()
* acpi-misc:
ACPI: button: Use strscpy() instead of strcpy()
ACPI: bus: Define and use symbols for device and class name lengths
ACPI: battery : Use strscpy() instead of strcpy()
ACPI: acpi_processor: Use strscpy instead() of strcpy()
ACPI: PAD: Use strscpy() instead of strcpy()
ACPI: AC: Use strscpy() instead of strcpy()
|
|
Merge ACPI battery driver, ACPI PMIC driver, ACPI processor driver and
ACPI CPPC library updates for 6.12-rc1:
- Use the driver core for the async probing management in the ACPI
battery driver (Thomas Weißschuh).
- Remove redundant initalizations of a local variable to NULL from the
ACPI battery driver (Ilpo Järvinen).
- Use strscpy() instead of strcpy() in the ACPI battery driver (Muhammad
Qasim Abdul Majeed).
- Remove unneeded check in tps68470_pmic_opregion_probe() (Aleksandr
Mishin).
- Add support for setting the EPP register through the ACPI CPPC sysfs
interface if it is in FFH (Mario Limonciello).
- Fix MASK_VAL() usage in the ACPI CPPC library (Clément Léger).
- Reduce the log level of a per-CPU message about idle states in the
ACPI processor driver (Li RongQing).
* acpi-battery:
ACPI: battery: use driver core managed async probing
ACPI: battery: Remove redundant NULL initalizations
ACPI: battery: Use strscpy() instead of strcpy()
* acpi-pmic:
ACPI: PMIC: Remove unneeded check in tps68470_pmic_opregion_probe()
* acpi-cppc:
ACPI: CPPC: Add support for setting EPP register in FFH
ACPI: CPPC: Fix MASK_VAL() usage
* acpi-processor:
ACPI: processor: Reduce the log level of a per-CPU message about idle states
|
|
Merge an ACPI EC driver update, ACPI sysfs interface updates, an ACPI
library function update, and an ACPI APD driver update for 6.12-rc1:
- Do not release locks during operation region accesses in the ACPI EC
driver (Rafael Wysocki).
- Fix up the _STR handling in the ACPI device object sysfs interface,
make it represent the device object attributes as an attribute group
and make it rely on driver core functionality for sysfs attrubute
management (Thomas Weißschuh).
- Extend error messages printed to the kernel log when acpi_evaluate_dsm()
fails to include revision and function number (David Wang).
- Add a new AMDI0015 platform device ID to the ACPi APD driver for AMD
SoCs (Shyam Sundar S K).
* acpi-ec:
ACPI: EC: Do not release locks during operation region accesses
* acpi-sysfs:
ACPI: sysfs: remove return value of acpi_device_setup_files()
ACPI: sysfs: manage sysfs attributes through device core
ACPI: sysfs: manage attributes as attribute_group
ACPI: sysfs: evaluate _STR on each sysfs access
ACPI: sysfs: validate return type of _STR method
* acpi-utils:
ACPI: utils: Add rev/func to message when acpi_evaluate_dsm() fails
* acpi-soc:
ACPI: APD: Add AMDI0015 as platform device
|
|
Merge ACPI and irqchip updates related to external interrupt controller
support on RISC-V:
- Add ACPI device enumeration support for interrupt controller probing
including taking dependencies into account (Sunil V L).
- Implement ACPI-based interrupt controller probing on RISC-V (Sunil V L).
- Add ACPI support for AIA in riscv-intc and add ACPI support to
riscv-imsic, riscv-aplic, and sifive-plic (Sunil V L).
* acpi-riscv:
irqchip/sifive-plic: Add ACPI support
irqchip/riscv-aplic: Add ACPI support
irqchip/riscv-imsic: Add ACPI support
irqchip/riscv-imsic-state: Create separate function for DT
irqchip/riscv-intc: Add ACPI support for AIA
ACPI: RISC-V: Implement function to add implicit dependencies
ACPI: RISC-V: Initialize GSI mapping structures
ACPI: RISC-V: Implement function to reorder irqchip probe entries
ACPI: RISC-V: Implement PCI related functionality
ACPI: pci_link: Clear the dependencies after probe
ACPI: bus: Add RINTC IRQ model for RISC-V
ACPI: scan: Define weak function to populate dependencies
ACPI: scan: Add RISC-V interrupt controllers to honor list
ACPI: scan: Refactor dependency creation
ACPI: bus: Add acpi_riscv_init() function
ACPI: scan: Add a weak arch_sort_irqchip_probe() to order the IRQCHIP probe
arm64: PCI: Migrate ACPI related functions to pci-acpi.c
|
|
Merge ACPICA updates for 6.12-rc1:
- Check return value in acpi_db_convert_to_package() (Pei Xiao).
- Detect FACS and allow setting the waking vector on reduced-hardware
ACPI platforms (Jiaqing Zhao).
- Allow ACPICA to represent semaphores as integers (Adrien Destugues).
- Complete CXL 3.0 CXIMS structures support in ACPICA (Zhang Rui).
- Make ACPICA support SPCR version 4 and add RISC-V SBI Subtype to
DBG2 (Sia Jee Heng).
- Implement the Dword_PCC Resource Descriptor Macro in ACPICA (Jose
Marinho).
- Correct the typo in struct acpi_mpam_msc_node member (Punit Agrawal).
- Implement ACPI_WARNING_ONCE() and ACPI_ERROR_ONCE() and use them to
prevent a Stall() violation warning from being printed every time
this takes place (Vasily Khoruzhick).
- Allow PCC Data Type in MCTP resource (Adam Young).
- Fix memory leaks on acpi_ps_get_next_namepath()
and acpi_ps_get_next_field() failures (Armin Wolf).
- Add support for supressing leading zeros in hex strings when
converting them to integers and update integer-to-hex-string
conversions in ACPICA (Armin Wolf).
- Add support for Windows 11 22H2 _OSI string (Armin Wolf).
- Avoid warning for Dump Functions in ACPICA (Adam Lackorzynski).
- Add extended linear address mode to HMAT MSCIS in ACPICA (Dave
Jiang).
- Handle empty connection_node in iasl (Aleksandrs Vinarskis).
- Allow for more flexibility in _DSM args (Saket Dumbre).
- Setup for ACPICA release 20240827 (Saket Dumbre).
* acpica: (23 commits)
ACPICA: Setup for ACPICA release 20240827
ACPICA: Allow for more flexibility in _DSM args
ACPICA: iasl: handle empty connection_node
ACPICA: HMAT: Add extended linear address mode to MSCIS
ACPICA: Avoid warning for Dump Functions
ACPICA: Add support for Windows 11 22H2 _OSI string
ACPICA: Update integer-to-hex-string conversions
ACPICA: Add support for supressing leading zeros in hex strings
ACPICA: Allow for supressing leading zeros when using acpi_ex_convert_to_ascii()
ACPICA: Fix memory leak if acpi_ps_get_next_field() fails
ACPICA: Fix memory leak if acpi_ps_get_next_namepath() fails
ACPICA: Allow PCC Data Type in MCTP resource.
ACPICA: executer/exsystem: Don't nag user about every Stall() violating the spec
ACPICA: Implement ACPI_WARNING_ONCE and ACPI_ERROR_ONCE
ACPICA: MPAM: Correct the typo in struct acpi_mpam_msc_node member
ACPICA: Implement the Dword_PCC Resource Descriptor Macro
ACPICA: Headers: Add RISC-V SBI Subtype to DBG2
ACPICA: SPCR: Update the SPCR table to version 4
ACPICA: Complete CXL 3.0 CXIMS structures
ACPICA: haiku: Fix invalid value used for semaphores
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge the second round of amd-pstate changes for 6.12 from Mario
Limonciello:
"* Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
* Harden preferred core detection to avoid potential false positives
* Add extra unit test coverage for mode state machine"
* tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
|
|
AMD systems that support preferred cores will use "166" as their
numerator for max frequency calculations instead of "255".
Add a function for detecting preferred cores by looking at the
highest perf value on all cores.
If preferred cores are enabled return 166 and if disabled the
value in the highest perf register. As the function will be called
multiple times, cache the values for the boost numerator and if
preferred cores will be enabled in global variables.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
amd_pstate_get_highest_perf() is a helper used to get the highest perf
value on AMD systems. It's used in amd-pstate as part of preferred
core handling, but applicable for acpi-cpufreq as well.
Move it out to cppc handling code as amd_get_highest_perf().
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The function name is ambiguous because it returns an intermediate value
for calculating maximum frequency rather than the CPPC 'Highest Perf'
register.
Rename the function to clarify its use and allow the function to return
errors. Adjust the consumer in acpi-cpufreq to catch errors.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
Checkpath emits the following warning:
```
WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP
```
Adjust the code accordingly.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
MASK_VAL() was added as a way to handle bit_offset and bit_width for
registers located in system memory address space. However, while suited
for reading, it does not work for writing and result in corrupted
registers when writing values with bit_offset > 0. Moreover, when a
register is collocated with another one at the same address but with a
different mask, the current code results in the other registers being
overwritten with 0s. The write procedure for SYSTEM_MEMORY registers
should actually read the value, mask it, update it and write it with the
updated value. Moreover, since registers can be located in the same
word, we must take care of locking the access before doing it. We should
potentially use a global lock since we don't know in if register
addresses aren't shared with another _CPC package but better not
encourage vendors to do so. Assume that registers can use the same word
inside a _CPC package and thus, use a per _CPC package lock.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20240826101648.95654-1-cleger@rivosinc.com
[ rjw: Dropped redundant semicolon ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 86c762afe5bf915e8101a0455513368e2a60dd80
Link: https://github.com/acpica/acpica/commit/86c762af
Signed-off-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit aaa08569b81aa4d9ff59f91f00e589e98d499e6c
Redefine the 2 reserved bytes at offset 28 of Memory Side Cache Information
Structure as "Address Mode" and add defines of the new value.
* 0 - Reserved (Unkown Address Mode)
* 1 - Extended-linear (N direct-map aliases linearly mapped)
* 2..65535 - Reserved (Unknown Address Mode)
Link: https://github.com/acpica/acpica/commit/aaa08569
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit f56218c4e4dc1d1f699662d0726ad9e7a0d58548
See: https://github.com/microsoft_docs/windows-driver-docs/commit/be9d1c211adf8fabe5a43de71c034b1b6d7372de
Link: https://github.com/acpica/acpica/commit/f56218c4
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 2ad4e6e7c4118f4cdfcad321c930b836cec77406
In some cases it is not practical nor useful to nag user about some
firmware errors that they cannot fix. Add a macro that will print a
warning or error only once to be used in these cases.
Link: https://github.com/acpica/acpica/commit/2ad4e6e7
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 3da3f7d776d17e9bfbb15de88317de8d7397ce38
A member of the struct acpi_mpam_msc_node that represents a Memory System
Controller node structure - num_resource_nodes has a typo. Fix the typo
No functional change.
Link: https://github.com/acpica/acpica/commit/3da3f7d7
Signed-off-by: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 6f4c900bcf9ca065129353f17a83773aa58095aa
Include the RISC-V SBI debugging subtype as documented in DBG2
dated April 10, 2023 [1].
Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table # [1]
Link: https://github.com/acpica/acpica/commit/6f4c900b
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 1eeff52124a45d5cd887ba5687bbad0116e4d211
The Microsoft Serial Port Console Redirection (SPCR) specification
revision 1.09 comprises additional fields [1]. The newly added fields
are:
- RISC-V SBI
- Precise Baud Rate
- namespace_string_length
- namespace_string_offset
- namespace_string
Additionaly, this code will support up to SPCR revision 1.10, as it
includes only minor wording changes.
Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table # [1]
Link: https://github.com/acpica/acpica/commit/1eeff521
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit eb2a2ff303416fb3f6c425d519dbcd6988dbd91f
Commit 2d8dc0383d3c9 ("Add CXL 3.0 structures (CXIMS & RDPAS) to the
CEDT table") introduces basic support for CXL XOR Interleave Math
Structure (CXIMS).
Complete the CXIMS structures.
No functional change.
Link: https://github.com/acpica/acpica/commit/eb2a2ff3
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 49fe4f25483feec2f685b204ef19e28d92979e95
In Haiku, semaphores are represented by integers, not pointers.
So, we can't use NULL as the invalid/destroyed value, the correct value
is -1. Introduce a platform overridable define to allow this.
Fixes #162 (which was closed after coming to the conclusion that this
should be done, but the change was never done).
Link: https://github.com/acpica/acpica/commit/49fe4f25
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Allow setting waking vector in FACS table on reduced hardware platforms
to support S3 wakeup.
Link: https://github.com/acpica/acpica/commit/ee53ed6b5452612bb44af542b68d605f8b2b1104
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Link: https://patch.msgid.link/20240827025821.2099068-3-jiaqing.zhao@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
According to Section 5.2.10 of ACPI Specification, FACS is optional
in reduced hardware model. Enable the detection for "Hardware-reduced
ACPI support only" build (CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y) also.
Link: https://github.com/acpica/acpica/commit/ee53ed6b5452612bb44af542b68d605f8b2b1104
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Link: https://patch.msgid.link/20240827025821.2099068-2-jiaqing.zhao@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some architectures like RISC-V need to add dependencies without explicit
_DEP. Define a weak function which can be implemented by the architecture.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-7-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some architectures like RISC-V will use implicit dependencies like GSI
map to create dependencies between interrupt controller and devices. To
support doing that, the function which creates the dependency, is
refactored bit and made public so that dependency can be added from
outside of scan.c as well.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-5-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is better to define symbols for the maximum ACPI device name length
and the maximum ACPI class name length instead of using raw numbers in
typedef statements.
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240804123313.16211-6-qasim.majeed20@gmail.com
[ rjw: Subject edits, added a changelog, dropped unrelated change ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Dell All In One (AIO) models released after 2017 use a backlight
controller board connected to an UART.
In DSDT this uart port will be defined as:
Name (_HID, "DELL0501")
Name (_CID, EisaId ("PNP0501")
Commit 484bae9e4d6a ("platform/x86: Add new Dell UART backlight driver")
has added support for this, but I neglected to tie this into
acpi_video_get_backlight_type().
Now the first AIO has turned up which has not only the DSDT bits for this,
but also an actual controller attached to the UART, yet it is not using
this controller for backlight control.
Add support to acpi_video_get_backlight_type() for a new dell_uart
backlight type. So that the existing infra to override the backlight
control method on the commandline or with DMI quirks can be used.
Fixes: 484bae9e4d6a ("platform/x86: Add new Dell UART backlight driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20240814190159.15650-2-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A subsequent change will need to pass a depth argument to
acpi_execute_reg_methods(), so prepare that function for it.
No intentional functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/8451567.NyiUUSuA9g@rjwysocki.net
|
|
This reverts commit 0e6b6dedf168 ("Revert "ACPI: EC: Evaluate orphan
_REG under EC device") because the problem addressed by it will be
addressed differently in what follows.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/3236716.5fSG56mABF@rjwysocki.net
|
|
The handling of the _STR method is inconsistent with the other method
evaluations. It is the only method which is cached.
The cached value stored in 'struct acpi_device_pnp' has a different
lifetime than the other struct members.
Commit d1efe3c324ea ("ACPI: Add new sysfs interface to export device description")
does not explain this difference.
Evaluating the method every time also removes the necessity to manage
the lifetime of the cached value, which would be a problem when managing
the sysfs attributes through the device core.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-2-058ab0667fa8@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git. |
