summaryrefslogtreecommitdiff
path: root/net/core/gro.c
AgeCommit message (Collapse)AuthorFilesLines
2024-10-01net: Add netif_get_gro_max_size helper for GRODaniel Borkmann1-7/+2
Add a small netif_get_gro_max_size() helper which returns the maximum IPv4 or IPv6 GRO size of the netdevice. We later add a netif_get_gso_max_size() equivalent as well for GSO, so that these helpers can be used consistently instead of open-coded checks. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240923212242.15669-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-11net: support non paged skb fragsMina Almasry1-1/+2
Make skb_frag_page() fail in the case where the frag is not backed by a page, and fix its relevant callers to handle this case. Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-8-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-26net: Correct spelling in net/coreSimon Horman1-1/+1
Correct spelling in net/core. As reported by codespell. Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240822-net-spell-v1-13-3a98971ce2d2@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13net: gro: move L3 flush checks to tcp_gro_receive and udp_gro_receive_segmentRichard Gobert1-3/+0
{inet,ipv6}_gro_receive functions perform flush checks (ttl, flags, iph->id, ...) against all packets in a loop. These flush checks are used in all merging UDP and TCP flows. These checks need to be done only once and only against the found p skb, since they only affect flush and not same_flow. This patch leverages correct network header offsets from the cb for both outer and inner network headers - allowing these checks to be done only once, in tcp_gro_receive and udp_gro_receive_segment. As a result, NAPI_GRO_CB(p)->flush is not used at all. In addition, flush_id checks are more declarative and contained in inet_gro_flush, thus removing the need for flush_id in napi_gro_cb. This results in less parsing code for non-loop flush tests for TCP and UDP flows. To make sure results are not within noise range - I've made netfilter drop all TCP packets, and measured CPU performance in GRO (in this case GRO is responsible for about 50% of the CPU utilization). perf top while replaying 64 parallel IP/TCP streams merging in GRO: (gro_receive_network_flush is compiled inline to tcp_gro_receive) net-next: 6.94% [kernel] [k] inet_gro_receive 3.02% [kernel] [k] tcp_gro_receive patch applied: 4.27% [kernel] [k] tcp_gro_receive 4.22% [kernel] [k] inet_gro_receive perf top while replaying 64 parallel IP/IP/TCP streams merging in GRO (same results for any encapsulation, in this case inet_gro_receive is top offender in net-next) net-next: 10.09% [kernel] [k] inet_gro_receive 2.08% [kernel] [k] tcp_gro_receive patch applied: 6.97% [kernel] [k] inet_gro_receive 3.68% [kernel] [k] tcp_gro_receive Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240509190819.2985-3-richardbgobert@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06net: move skb_gro_receive_list from udp to coreFelix Fietkau1-0/+27
This helper function will be used for TCP fraglist GRO support Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/filter.h kernel/bpf/core.c 66e13b615a0c ("bpf: verifier: prevent userspace memory access") d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT") https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-02net: gro: fix udp bad offset in socket lookup by adding ↵Richard Gobert1-0/+1
{inner_}network_offset to napi_gro_cb Commits a602456 ("udp: Add GRO functions to UDP socket") and 57c67ff ("udp: additional GRO support") introduce incorrect usage of {ip,ipv6}_hdr in the complete phase of gro. The functions always return skb->network_header, which in the case of encapsulated packets at the gro complete phase, is always set to the innermost L3 of the packet. That means that calling {ip,ipv6}_hdr for skbs which completed the GRO receive phase (both in gro_list and *_gro_complete) when parsing an encapsulated packet's _outer_ L3/L4 may return an unexpected value. This incorrect usage leads to a bug in GRO's UDP socket lookup. udp{4,6}_lib_lookup_skb functions use ip_hdr/ipv6_hdr respectively. These *_hdr functions return network_header which will point to the innermost L3, resulting in the wrong offset being used in __udp{4,6}_lib_lookup with encapsulated packets. This patch adds network_offset and inner_network_offset to napi_gro_cb, and makes sure both are set correctly. To fix the issue, network_offsets union is used inside napi_gro_cb, in which both the outer and the inner network offsets are saved. Reproduction example: Endpoint configuration example (fou + local address bind) # ip fou add port 6666 ipproto 4 # ip link add name tun1 type ipip remote 2.2.2.1 local 2.2.2.2 encap fou encap-dport 5555 encap-sport 6666 mode ipip # ip link set tun1 up # ip a add 1.1.1.2/24 dev tun1 Netperf TCP_STREAM result on net-next before patch is applied: net-next main, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.28 2.37 net-next main, GRO disabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2745.06 patch applied, GRO enabled: $ netperf -H 1.1.1.2 -t TCP_STREAM -l 5 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 5.01 2877.38 Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-11net: move skb ref helpers to new headerMina Almasry1-0/+1
Add a new header, linux/skbuff_ref.h, which contains all the skb_*_ref() helpers. Many of the consumers of skbuff.h do not actually use any of the skb ref helpers, and we can speed up compilation a bit by minimizing this header file. Additionally in the later patch in the series we add page_pool support to skb_frag_ref(), which requires some page_pool dependencies. We can now add these dependencies to skbuff_ref.h instead of a very ubiquitous skbuff.h Signed-off-by: Mina Almasry <almasrymina@google.com> Link: https://lore.kernel.org/r/20240410190505.1225848-2-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29gro: fix ownership transferAntoine Tenart1-1/+2
If packets are GROed with fraglist they might be segmented later on and continue their journey in the stack. In skb_segment_list those skbs can be reused as-is. This is an issue as their destructor was removed in skb_gro_receive_list but not the reference to their socket, and then they can't be orphaned. Fix this by also removing the reference to the socket. For example this could be observed, kernel BUG at include/linux/skbuff.h:3131! (skb_orphan) RIP: 0010:ip6_rcv_core+0x11bc/0x19a0 Call Trace: ipv6_list_rcv+0x250/0x3f0 __netif_receive_skb_list_core+0x49d/0x8f0 netif_receive_skb_list_internal+0x634/0xd40 napi_complete_done+0x1d2/0x7d0 gro_cell_poll+0x118/0x1f0 A similar construction is found in skb_gro_receive, apply the same change there. Fixes: 5e10da5385d2 ("skbuff: allow 'slow_gro' for skb carring sock reference") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-07net: introduce struct net_hotdataEric Dumazet1-9/+6
Instead of spreading networking critical fields all over the places, add a custom net_hotdata structure so that we can precisely control its layout. In this first patch, move : - gro_normal_batch used in rx (GRO stack) - offload_base used in rx and tx (GRO and TSO stacks) Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240306160031.874438-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05net: gro: enable fast path for more casesEric Dumazet1-7/+16
Currently the so-called GRO fast path is only enabled for napi_frags_skb() callers. After the prior patch, we no longer have to clear frag0 whenever we pulled bytes to skb->head. We therefore can initialize frag0 to skb->data so that GRO fast path can be used in the following additional cases: - Drivers using header split (populating skb->data with headers, and having payload in one or more page fragments). - Drivers not using any page frag (entire packet is in skb->data) Add a likely() in skb_gro_may_pull() to help the compiler to generate better code if possible. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-05net: gro: rename skb_gro_header_hard()Eric Dumazet1-1/+1
skb_gro_header_hard() is renamed to skb_gro_may_pull() to match the convention used by common helpers like pskb_may_pull(). This means the condition is inverted: if (skb_gro_header_hard(skb, hlen)) slow_path(); becomes: if (!skb_gro_may_pull(skb, hlen)) slow_path(); Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-18gro: move the tc_ext comparison to a helperJakub Kicinski1-13/+19
The double ifdefs (one for the variable declaration and one around the code) are quite aesthetically displeasing. Factor this code out into a helper for easier wrapping. This will become even more ugly when another skb ext comparison is added in the future. The resulting machine code looks the same, the compiler seems to try to use %rax more and some blocks more around but I haven't spotted minor differences. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-10net: move gso declarations and functions to their own filesEric Dumazet1-58/+1
Move declarations into include/net/gso.h and code into net/core/gso.c Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stanislav Fomichev <sdf@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-06gro: decrease size of CBRichard Gobert1-7/+12
The GRO control block (NAPI_GRO_CB) is currently at its maximum size. This commit reduces its size by putting two groups of fields that are used only at different times into a union. Specifically, the fields frag0 and frag0_len are the fields that make up the frag0 optimisation mechanism, which is used during the initial parsing of the SKB. The fields last and age are used after the initial parsing, while the SKB is stored in the GRO list, waiting for other packets to arrive. There was one location in dev_gro_receive that modified the frag0 fields after setting last and age. I changed this accordingly without altering the code behaviour. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230601161407.GA9253@debian Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-13net: introduce and use skb_frag_fill_page_desc()Yunsheng Lin1-3/+1
Most users use __skb_frag_set_page()/skb_frag_off_set()/ skb_frag_size_set() to fill the page desc for a skb frag. Introduce skb_frag_fill_page_desc() to do that. net/bpf/test_run.c does not call skb_frag_off_set() to set the offset, "copy_from_user(page_address(page), ...)" and 'shinfo' being part of the 'data' kzalloced in bpf_test_init() suggest that it is assuming offset to be initialized as zero, so call skb_frag_fill_page_desc() with offset being zero for this case. Also, skb_frag_set_page() is not used anymore, so remove it. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-20net: skbuff: update and rename __kfree_skb_defer()Jakub Kicinski1-1/+1
__kfree_skb_defer() uses the old naming where "defer" meant slab bulk free/alloc APIs. In the meantime we also made __kfree_skb_defer() feed the per-NAPI skb cache, which implies bulk APIs. So take away the 'defer' and add 'napi'. While at it add a drop reason. This only matters on the tx_action path, if the skb has a frag_list. But getting rid of a SKB_DROP_REASON_NOT_SPECIFIED seems like a net benefit so why not. Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230420020005.815854-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+10
net/core/gro.c 7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO") b1a78b9b9886 ("net: add support for ipv4 big tcp") https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-01net: add support for ipv4 big tcpXin Long1-5/+7
Similar to Eric's IPv6 BIG TCP, this patch is to enable IPv4 BIG TCP. Firstly, allow sk->sk_gso_max_size to be set to a value greater than GSO_LEGACY_MAX_SIZE by not trimming gso_max_size in sk_trim_gso_size() for IPv4 TCP sockets. Then on TX path, set IP header tot_len to 0 when skb->len > IP_MAX_MTU in __ip_local_out() to allow to send BIG TCP packets, and this implies that skb->len is the length of a IPv4 packet; On RX path, use skb->len as the length of the IPv4 packet when the IP header tot_len is 0 and skb->len > IP_MAX_MTU in ip_rcv_core(). As the API iph_set_totlen() and skb_ip_totlen() are used in __ip_local_out() and ip_rcv_core(), we only need to update these APIs. Also in GRO receive, add the check for ETH_P_IP/IPPROTO_TCP, and allows the merged packet size >= GRO_LEGACY_MAX_SIZE in skb_gro_receive(). In GRO complete, set IP header tot_len to 0 when the merged packet size greater than IP_MAX_MTU in iph_set_totlen() so that it can be processed on RX path. Note that by checking skb_is_gso_tcp() in API iph_totlen(), it makes this implementation safe to use iph->len == 0 indicates IPv4 BIG TCP packets. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-27skb: Do mix page pool and page referenced frags in GROAlexander Duyck1-0/+9
GSO should not merge page pool recycled frames with standard reference counted frames. Traditionally this didn't occur, at least not often. However as we start looking at adding support for wireless adapters there becomes the potential to mix the two due to A-MSDU repartitioning frames in the receive path. There are possibly other places where this may have occurred however I suspect they must be few and far between as we have not seen this issue until now. Fixes: 53e0961da1c7 ("page_pool: add frag page recycling support in page pool") Reported-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/167475990764.1934330.11960904198087757911.stgit@localhost.localdomain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-09gro: take care of DODGY packetsEric Dumazet1-2/+3
Jaroslav reported a recent throughput regression with virtio_net caused by blamed commit. It is unclear if DODGY GSO packets coming from user space can be accepted by GRO engine in the future with minimal changes, and if there is any expected gain from it. In the meantime, make sure to detect and flush DODGY packets. Fixes: 5eddb24901ee ("gro: add support of (hw)gro packets to gro stack") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-and-bisected-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-11net: gro: no longer use skb_vlan_tag_present()Eric Dumazet1-3/+1
We can remove a conditional test in gro_list_prepare() by comparing vlan_all fields of the two skbs. Notes: While comparing the vlan_proto is not strictly needed, because part of the following compare_ether_header() call, using 32bit word is actually faster than using 16bit values. napi_reuse_skb() makes sure to clear skb->vlan_all, as it already calls __vlan_hwaccel_clear_tag() Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-10gro: avoid checking for a failed searchRichard Gobert1-35/+35
After searching for a protocol handler in dev_gro_receive, checking for failure is redundant. Skip the failure code after finding the corresponding handler. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221108123320.GA59373@debian Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-03gro: add support of (hw)gro packets to gro stackCoco Li1-4/+14
Current GRO stack only supports incoming packets containing one frame/MSS. This patch changes GRO to accept packets that are already GRO. HW-GRO (aka RSC for some vendors) is very often limited in presence of interleaved packets. Linux SW GRO stack can complete the job and provide larger GRO packets, thus reducing rate of ACK packets and cpu overhead. This also means BIG TCP can still be used, even if HW-GRO/RSC was able to cook ~64 KB GRO packets. v2: fix logic in tcp_gro_receive() Only support TCP for the moment (Paolo) Co-Developed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Coco Li <lixiaoyan@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-16net: allow gro_max_size to exceed 65536Alexander Duyck1-0/+8
Allow the gro_max_size to exceed a value larger than 65536. There weren't really any external limitations that prevented this other than the fact that IPv4 only supports a 16 bit length field. Since we have the option of adding a hop-by-hop header for IPv6 we can allow IPv6 to exceed this value and for IPv4 and non-TCP flows we can cap things at 65536 via a constant rather than relying on gro_max_size. [edumazet] limit GRO_MAX_SIZE to (8 * 65535) to avoid overflows. Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+25
net/dsa/dsa2.c commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails") commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master") https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/ drivers/net/ethernet/intel/ice/ice.h commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU") commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device") https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/ drivers/staging/gdm724x/gdm_lte.c commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()") commit 4bcc4249b4cf ("staging: Use netif_rx().") https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-07net: Fix esp GSO on inter address family tunnels.Steffen Klassert1-0/+25
The esp tunnel GSO handlers use skb_mac_gso_segment to push the inner packet to the segmentation handlers. However, skb_mac_gso_segment takes the Ethernet Protocol ID from 'skb->protocol' which is wrong for inter address family tunnels. We fix this by introducing a new skb_eth_gso_segment function. This function can be used if it is necessary to pass the Ethernet Protocol ID directly to the segmentation handler. First users of this function will be the esp4 and esp6 tunnel segmentation handlers. Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-02-05net: gro: minor optimization for dev_gro_receive()Paolo Abeni1-11/+4
While inspecting some perf report, I noticed that the compiler emits suboptimal code for the napi CB initialization, fetching and storing multiple times the memory for flags bitfield. This is with gcc 10.3.1, but I observed the same with older compiler versions. We can help the compiler to do a nicer work clearing several fields at once using an u32 alias. The generated code is quite smaller, with the same number of conditional. Before: objdump -t net/core/gro.o | grep " F .text" 0000000000000bb0 l F .text 0000000000000357 dev_gro_receive After: 0000000000000bb0 l F .text 000000000000033c dev_gro_receive v1 -> v2: - use struct_group (Alexander and Alex) RFC -> v1: - use __struct_group to delimit the zeroed area (Alexander) Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-05net: gro: avoid re-computing truesize twice on recyclePaolo Abeni1-1/+0
After commit 5e10da5385d2 ("skbuff: allow 'slow_gro' for skb carring sock reference") and commit af352460b465 ("net: fix GRO skb truesize update") the truesize of the skb with stolen head is properly updated by the GRO engine, we don't need anymore resetting it at recycle time. v1 -> v2: - clarify the commit message (Alexander) Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-06gro: add ability to control gro max packet sizeCoco Li1-1/+5
Eric Dumazet suggested to allow users to modify max GRO packet size. We have seen GRO being disabled by users of appliances (such as wifi access points) because of claimed bufferbloat issues, or some work arounds in sch_cake, to split GRO/GSO packets. Instead of disabling GRO completely, one can chose to limit the maximum packet size of GRO packets, depending on their latency constraints. This patch adds a per device gro_max_size attribute that can be changed with ip link command. ip link set dev eth0 gro_max_size 16000 Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Coco Li <lixiaoyan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-16net: gro: populate net/core/gro.cEric Dumazet1-0/+648
Move gro code and data from net/core/dev.c to net/core/gro.c to ease maintenance. gro_normal_list() and gro_normal_one() are inlined because they are called from both files. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-16net: gro: move skb_gro_receive into net/core/gro.cEric Dumazet1-0/+118
net/core/gro.c will contain all core gro functions, to shrink net/core/skbuff.c and net/core/dev.c Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-05-14 20:25:44 +0000