| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a test for dumping RSS contexts. Make sure indir table
and key are sane when contexts are created with various
combination of inputs. Test the dump filtering by ifname
and start-context.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include the "name" of the context in the comment for traffic
checks. Makes it easier to reason about which context failed
when we loop over 32 contexts (it may matter if we failed in
first vs last, for example).
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Petr suggested to use errno.EOPNOTSUPP instead of hard-coded 95
in the new test case. Adjust existing ones to match this style.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20240802000309.2368-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We had a handful of bugs relating to key being either all 0
or just reported incorrectly as all 0. Check for this in
the tests.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some workloads may want to rehash the flows in response to an imbalance.
Most effective way to do that is changing the RSS key. Check that changing
the key does not cause link flaps or traffic disruption.
Disrupting traffic for key update is not incorrect, but makes the key
update unusable for rehashing under load.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some devices dynamically increase and decrease the size of the RSS
indirection table based on the number of enabled queues.
When that happens driver must maintain the balance of entries
(preferably duplicating the smaller table).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default main RSS table should change to include all queues.
When user sets a specific RSS config the driver should preserve it,
even when queue count changes. Driver should refuse to deactivate
queues used in the user-set RSS config.
For additional contexts driver should still refuse to deactivate
queues in use. Whether the contexts should get resized like
context 0 when queue count increases is a bit unclear. I anticipate
most drivers today don't do that. Since main use case for additional
contexts is to set the indir table - it doesn't seem worthwhile to
care about behavior of the default table too much. Don't test that.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wrap up sending traffic and checking in which queues it landed
in a helper.
The method used for testing is to send a lot of iperf traffic
and check which queues received the most packets. Those should
be the queues where we expect iperf to land - either because we
installed a filter for the port iperf uses, or we didn't and
expect it to use context 0.
Contexts get disjoint queue sets, but the main context (AKA context 0)
may receive some background traffic (noise).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The basic test may fail without resetting the RSS indir table.
Use the .exec() method to run cleanup early since we re-test
with traffic that returning to default state works.
While at it reformat the doc a tiny bit.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240708213627.226025-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As predicted by David running the test on a machine with a single
interface is a bit unreliable. We try to send 20k packets with
iperf and expect fewer than 10k packets on the default context.
The test isn't very quick, iperf will usually send 100k packets
by the time we stop it. So we're off by 5x on the number of iperf
packets but still expect default context to only get the hardcoded
10k. The intent is to make sure we get noticeably less traffic
on the default context. Use half of the resulting iperf traffic
instead of the hard coded 10k.
Link: https://patch.msgid.link/20240702233728.4183387-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use just added defer().
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20240627185502.3069139-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests focusing on indirection table configuration and
creating extra RSS contexts in drivers which support it.
$ export NETIF=eth0 REMOTE_...
$ ./drivers/net/hw/rss_ctx.py
KTAP version 1
1..8
ok 1 rss_ctx.test_rss_key_indir
ok 2 rss_ctx.test_rss_context
ok 3 rss_ctx.test_rss_context4
# Increasing queue count 44 -> 66
# Failed to create context 32, trying to test what we got
ok 4 rss_ctx.test_rss_context32 # SKIP Tested only 31 contexts, wanted 32
ok 5 rss_ctx.test_rss_context_overlap
ok 6 rss_ctx.test_rss_context_overlap2
# .. sprays traffic like a headless chicken ..
not ok 7 rss_ctx.test_rss_context_out_of_order
ok 8 rss_ctx.test_rss_context4_create_with_cfg
# Totals: pass:6 fail:1 xfail:0 xpass:0 skip:1 error:0
Note that rss_ctx.test_rss_context_out_of_order fails with the device
I tested with, but it seems to be a device / driver bug.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240626012456.2326192-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Run tools/testing/selftest/net/csum.c as part of drv-net.
This binary covers multiple scenarios, based on arguments given,
for both IPv4 and IPv6:
- Accept UDP correct checksum
- Detect UDP invalid checksum
- Accept TCP correct checksum
- Detect TCP invalid checksum
- Transmit UDP: basic checksum offload
- Transmit UDP: zero checksum conversion
The test direction is reversed between receive and transmit tests, so
that the NIC under test is always the local machine.
In total this adds up to 12 testcases, with more to follow. For
conciseness, I replaced individual functions with a function factory.
Also detect hardware offload feature availability using Ethtool
netlink and skip tests when either feature is off. This need may be
common for offload feature tests and eventually deserving of a thin
wrapper in lib.py.
Missing are the PF_PACKET based send tests ('-P'). These use
virtio_net_hdr to program hardware checksum offload. Which requires
looking up the local MAC address and (harder) the MAC of the next hop.
I'll have to give it some though how to do that robustly and where
that code would belong.
Tested:
make -C tools/testing/selftests/ \
TARGETS="drivers/net drivers/net/hw" \
install INSTALL_PATH=/tmp/ksft
cd /tmp/ksft
sudo NETIF=ens4 REMOTE_TYPE=ssh \
REMOTE_ARGS="root@10.40.0.2" \
LOCAL_V4="10.40.0.1" \
REMOTE_V4="10.40.0.2" \
./run_kselftest.sh -t drivers/net/hw:csum.py
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240507154216.501111-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bugs in memory allocation failure paths are quite common.
Add a test exercising those paths based on qstat and page pool
failure hook.
Running on bnxt:
# ./drivers/net/hw/pp_alloc_fail.py
KTAP version 1
1..1
# ethtool -G change retval: success
ok 1 pp_alloc_fail.test_pp_alloc
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
I initially wrote this test to validate commit be43b7489a3c ("net/mlx5e:
RX, Fix page_pool allocation failure recovery for striding rq") but mlx5
still doesn't have qstat. So I run it on bnxt, and while bnxt survives
I found the problem fixed in commit 730117730709 ("eth: bnxt: fix counting
packets discarded due to OOM and netpoll").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We created a separate directory for HW-only tests, recently.
Glue in the Python test library there, Python is a bit annoying
when it comes to using library code located "lower"
in the directory structure.
Reuse the Env class, but let tests require non-nsim setup.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tests use the constant TC_HIT_TIMEOUT when waiting on the counter
values. However it does not include tc_common.sh where the counter is
specified. The test has been robust in our testing, which means the counter
is bumped quickly enough that the updated value is available already on the
first iteration. Nevertheless it's not correct. Include tc_common.sh as
appropriate.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some log_test calls are done in a loop, and lead to the same log output.
This might prove tricky to deduplicate for automated tools. Instead, roll
the unique information from log_info to log_test, and drop the log_info.
This also leads to more compact and clearer output.
This change prompts rewording the messages so that they are not excessively
long.
Some check_err messages do not indicate what the issue actually is, so
reword them to say it's a "ping with", like is the case in some other
instances in this test.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When rx-pktsNtoM reports a range that involves very low-valued range, such
as 0-64, the calculated length of the packet will be -4, because FCS is
subtracted from the value. mausezahn then confuses the value for an option
and bails out. As a result, the test dumps many mausezahn error messages.
Instead, cap the value at 0. mausezahn will use an appropriate minimum
packet length.
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The SKIP return should be used for cases where tooling of the machine under
test is lacking. For cases where HW is lacking, the appropriate outcome is
XFAIL.
This is the case with ethtool_rmon and mlxsw_lib. For these, introduce a
new helper, log_test_xfail().
Do the same for router_mpath_nh_lib. Note that it will be fixed using a
more reusable way in a following patch.
For the two resource_scale selftests, the log should simply not be written,
because there is no problem.
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/3d668d8fb6fa0d9eeb47ce6d9e54114348c7c179.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the selftests that are not supposed to run on veth pairs are now in
their own dedicated directory, the skip_on_veth logic can go away. Drop it
from the selftests, and from lib.sh.
Cc: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/63b470e10d65270571ee7de709b31672ce314872.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tests in net/forwarding are generally expected to be HW-independent.
There are however several tests that, while not depending on any HW in
particular, nevertheless depend on being used on HW interfaces. Placing
these selftests to net/forwarding is confusing, because the selftest will
just report it can't be run on veth pairs. At the same time, placing them
to a particular driver's selftests subdirectory would be wrong.
Instead, add a new directory, drivers/net/hw, where these generic but HW
independent selftests should be placed. Move over several such tests
including one helper library.
Since typically these tests will not be expected to run, omit the directory
drivers/net/hw from the TARGETS list in selftests/Makefile. Retain a
Makefile in the new directory itself, so that a user can make -C into that
directory and act on those tests explicitly.
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Cc: Danielle Ratson <danieller@nvidia.com>
Cc: Davide Caratti <dcaratti@redhat.com>
Cc: Johannes Nixdorf <jnixdorf-oss@avm.de>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/e11dae1f62703059e9fc2240004288ac7cc15756.1711464583.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
