// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
/*
* Copyright (C) 2005-2014, 2018-2019, 2021, 2024 Intel Corporation
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/export.h>
#include "iwl-drv.h"
#include "iwl-debug.h"
#include "iwl-io.h"
#include "iwl-prph.h"
#include "iwl-csr.h"
#include "agn.h"
/* EEPROM offset definitions */
/* indirect access definitions */
#define ADDRESS_MSK 0x0000FFFF
#define INDIRECT_TYPE_MSK 0x000F0000
#define INDIRECT_HOST 0x00010000
#define INDIRECT_GENERAL 0x00020000
#define INDIRECT_REGULATORY 0x00030000
#define INDIRECT_CALIBRATION 0x00040000
#define INDIRECT_PROCESS_ADJST 0x00050000
#define INDIRECT_OTHERS 0x00060000
#define INDIRECT_TXP_LIMIT 0x00070000
#define INDIRECT_TXP_LIMIT_SIZE 0x00080000
#define INDIRECT_ADDRESS 0x00100000
/* corresponding link offsets in EEPROM */
#define EEPROM_LINK_HOST (2*0x64)
#define EEPROM_LINK_GENERAL (2*0x65)
#define EEPROM_LINK_REGULATORY (2*0x66)
#define EEPROM_LINK_CALIBRATION (2*0x67)
#define EEPROM_LINK_PROCESS_ADJST (2*0x68)
#define EEPROM_LINK_OTHERS (2*0x69)
#define EEPROM_LINK_TXP_LIMIT (2*0x6a)
#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b)
/* General */
#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */
#define EEPROM_SUBSYSTEM_ID (2*0x0A) /* 2 bytes */
#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */
#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */
#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */
#define EEPROM_VERSION (2*0x44) /* 2 bytes */
#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */
#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */
#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */
#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */
/* calibration */
struct iwl_eeprom_calib_hdr {
u8 version;
u8 pa_type;
__le16 voltage;
} __packed;
#define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION)
#define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL)
/* temperature */
#define EEPROM_KELVIN_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL)
#define EEPROM_RAW_TEMPERATURE ((2*0x12B) | EEPROM_CALIB_ALL)
/* SKU Capabilities (actual values from EEPROM definition) */
enum eeprom_sku_bits {
EEPROM_SKU_CAP_BAND_24GHZ = BIT(4),
EEPROM_SKU_CAP_BAND_52GHZ = BIT(5),
EEPROM_SKU_CAP_11N_ENABLE = BIT(6),
EEPROM_SKU_CAP_AMT_ENABLE = BIT(7),
EEPROM_SKU_CAP_IPAN_ENABLE = BIT(8)
};
/* radio config bits (actual values from EEPROM definition) */
#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */
#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */
#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */
#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */
#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */
#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
/*
* EEPROM bands
* These are the channel numbers from each band in the order
* that they are stored in the EEPROM band information. Note
* that EEPROM bands aren't the same as mac80211 bands, and
* there are even special "ht40 bands" in the EEPROM.
*/
static const u8 iwl_eeprom_band_1[14] = { /* 2.4 GHz */
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
};
static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */
183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
};
static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */
34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
};
static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */
100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
};
static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */
145, 149, 153, 157, 161, 165
};
static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */
1, 2, 3, 4, 5, 6, 7
};
static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */
36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
};
#define IWL_NUM_CHANNELS (ARRAY_SIZE(iwl_eeprom_band_1) + \
ARRAY_SIZE(iwl_eeprom_band_2) + \
ARRAY_SIZE(iwl_eeprom_band_3) + \
ARRAY_SIZE(iwl_eeprom_band_4) + \
ARRAY_SIZE(iwl_eeprom_band_5))
/* rate data (static) */
static struct ieee80211_rate iwl_cfg80211_rates[] = {
{ .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, },
{ .bitrate = 2 * 10, .hw_value = 1, .hw_value_short = 1,
.flags = IEEE80211_RATE_SHORT_PREAMBLE, },
{ .bitrate = 5.5 * 10, .hw_value = 2, .hw_value_short = 2,
.flags = IEEE80211_RATE_SHORT_PREAMBLE, },
{ .bitrate = 11 * 10, .hw_value = 3, .hw_value_short = 3,
.flags = IEEE80211_RATE_SHORT_PREAMBLE, },
{ .bitrate = 6 * 10, .hw_value = 4, .hw_value_short = 4, },
{ .bitrate = 9 * 10<