// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
* Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
* Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
*
* AB8500 peripheral regulators
*
* AB8500 supports the following regulators:
* VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
*
* AB8505 supports the following regulators:
* VAUX1/2/3/4/5/6, VINTCORE, VADC, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/of.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/ab8500.h>
#include <linux/slab.h>
/**
* struct ab8500_shared_mode - is used when mode is shared between
* two regulators.
* @shared_regulator: pointer to the other sharing regulator
* @lp_mode_req: low power mode requested by this regulator
*/
struct ab8500_shared_mode {
struct ab8500_regulator_info *shared_regulator;
bool lp_mode_req;
};
/**
* struct ab8500_regulator_info - ab8500 regulator information
* @dev: device pointer
* @desc: regulator description
* @shared_mode: used when mode is shared between two regulators
* @load_lp_uA: maximum load in idle (low power) mode
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
* @update_mask: mask to enable/disable and set mode of regulator
* @update_val: bits holding the regulator current mode
* @update_val_idle: bits to enable the regulator in idle (low power) mode
* @update_val_normal: bits to enable the regulator in normal (high power) mode
* @mode_bank: bank with location of mode register
* @mode_reg: mode register
* @mode_mask: mask for setting mode
* @mode_val_idle: mode setting for low power
* @mode_val_normal: mode setting for normal power
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
* @expand_register:
*/
struct ab8500_regulator_info {
struct device *dev;
struct regulator_desc desc;
struct ab8500_shared_mode *shared_mode;
int load_lp_uA;
u8 update_bank;
u8 update_reg;
u8 update_mask;
u8 update_val;
u8 update_val_idle;
u8 update_val_normal;
u8 mode_bank;
u8 mode_reg;
u8 mode_mask;
u8 mode_val_idle;
u8 mode_val_normal;
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
};
/* voltage tables for the vauxn/vintcore supplies */
static const unsigned int ldo_vauxn_voltages[] = {
1100000,
1200000,
1300000,
1400000,
1500000,
1800000,
1850000,
1900000,
2500000,
2650000,
2700000,
2750000,
2800000,
2900000,
3000000,
3300000,
};
static const unsigned
| 