// SPDX-License-Identifier: GPL-2.0
/*
* SuperH MSIOF SPI Controller Interface
*
* Copyright (c) 2009 Magnus Damm
* Copyright (C) 2014 Renesas Electronics Corporation
* Copyright (C) 2014-2017 Glider bvba
*/
#include <linux/bitmap.h>
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/sh_dma.h>
#include <linux/spi/sh_msiof.h>
#include <linux/spi/spi.h>
#include <asm/unaligned.h>
struct sh_msiof_chipdata {
u32 bits_per_word_mask;
u16 tx_fifo_size;
u16 rx_fifo_size;
u16 ctlr_flags;
u16 min_div_pow;
};
struct sh_msiof_spi_priv {
struct spi_controller *ctlr;
void __iomem *mapbase;
struct clk *clk;
struct platform_device *pdev;
struct sh_msiof_spi_info *info;
struct completion done;
struct completion done_txdma;
unsigned int tx_fifo_size;
unsigned int rx_fifo_size;
unsigned int min_div_pow;
void *tx_dma_page;
void *rx_dma_page;
dma_addr_t tx_dma_addr;
dma_addr_t rx_dma_addr;
bool native_cs_inited;
bool native_cs_high;
bool slave_aborted;
};
#define MAX_SS 3 /* Maximum number of native chip selects */
#define SITMDR1 0x00 /* Transmit Mode Register 1 */
#define SITMDR2 0x04 /* Transmit Mode Register 2 */
#define SITMDR3 0x08 /* Transmit Mode Register 3 */
#define SIRMDR1 0x10 /* Receive Mode Register 1 */
#define SIRMDR2 0x14 /* Receive Mode Register 2 */
#define SIRMDR3 0x18 /* Receive Mode Register 3 */
#define SITSCR 0x20 /* Transmit Clock Select Register */
#define SIRSCR 0x22 /* Receive Clock Select Register (SH, A1, APE6) */
#define SICTR 0x28 /* Control Register */
#define SIFCTR 0x30 /* FIFO Control Register */
#define SISTR 0x40 /* Status Register */
#define SIIER 0x44 /* Interrupt Enable Register */
#define SITDR1 0x48 /* Transmit Control Data Register 1 (SH, A1) */
#define SITDR2 0x4c /* Transmit Control Data Register 2 (SH, A1) */
#define SITFDR 0x50 /* Transmit FIFO Data Register */
#define SIRDR1 0x58 /* Receive Control Data Register 1 (SH, A1) */
#define SIRDR2 0x5c </