path: root/include/linux/pci.h

/*
 *	pci.h
 *
 *	PCI defines and function prototypes
 *	Copyright 1994, Drew Eckhardt
 *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
 *
 *	For more information, please consult the following manuals (look at
 *	http://www.pcisig.com/ for how to get them):
 *
 *	PCI BIOS Specification
 *	PCI Local Bus Specification
 *	PCI to PCI Bridge Specification
 *	PCI System Design Guide
 */

#ifndef LINUX_PCI_H
#define LINUX_PCI_H

#include <linux/pci_regs.h>	/* The pci register defines */

/*
 * The PCI interface treats multi-function devices as independent
 * devices.  The slot/function address of each device is encoded
 * in a single byte as follows:
 *
 *	7:3 = slot
 *	2:0 = function
 */
#define PCI_DEVFN(slot, func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
#define PCI_FUNC(devfn)		((devfn) & 0x07)

/* Ioctls for /proc/bus/pci/X/Y nodes. */
#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */

#ifdef __KERNEL__

#include <linux/mod_devicetable.h>

#include <linux/types.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/kobject.h>
#include <asm/atomic.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/irqreturn.h>

/* Include the ID list */
#include <linux/pci_ids.h>

/* pci_slot represents a physical slot */
struct pci_slot {
	struct pci_bus *bus;		/* The bus this slot is on */
	struct list_head list;		/* node in list of slots on this bus */
	struct hotplug_slot *hotplug;	/* Hotplug info (migrate over time) */
	unsigned char number;		/* PCI_SLOT(pci_dev->devfn) */
	struct kobject kobj;
};

static inline const char *pci_slot_name(const struct pci_slot *slot)
{
	return kobject_name(&slot->kobj);
}

/* File state for mmap()s on /proc/bus/pci/X/Y */
enum pci_mmap_state {
	pci_mmap_io,
	pci_mmap_mem
};

/* This defines the direction arg to the DMA mapping routines. */
#define PCI_DMA_BIDIRECTIONAL	0
#define PCI_DMA_TODEVICE	1
#define PCI_DMA_FROMDEVICE	2
#define PCI_DMA_NONE		3

/*
 *  For PCI devices, the region numbers are assigned this way:
 */
enum {
	/* #0-5: standard PCI resources */
	PCI_STD_RESOURCES,
	PCI_STD_RESOURCE_END = 5,

	/* #6: expansion ROM resource */
	PCI_ROM_RESOURCE,

	/* device specific resources */
#ifdef CONFIG_PCI_IOV
	PCI_IOV_RESOURCES,
	PCI_IOV_RESOURCE_END = PCI_IOV_RESOURCES + PCI_SRIOV_NUM_BARS - 1,
#endif

	/* resources assigned to buses behind the bridge */
#define PCI_BRIDGE_RESOURCE_NUM 4

	PCI_BRIDGE_RESOURCES,
	PCI_BRIDGE_RESOURCE_END = PCI_BRIDGE_RESOURCES +
				  PCI_BRIDGE_RESOURCE_NUM - 1,

	/* total resources associated with a PCI device */
	PCI_NUM_RESOURCES,

	/* preserve this for compatibility */
	DEVICE_COUNT_RESOURCE
};

typedef int __bitwise pci_power_t;

#define PCI_D0		((pci_power_t __force) 0)
#define PCI_D1		((pci_power_t __force) 1)
#define PCI_D2		((pci_power_t __force) 2)
#define PCI_D3hot	((pci_power_t __force) 3)
#define PCI_D3cold	((pci_power_t __force) 4)
#define PCI_UNKNOWN	((pci_power_t __force) 5)
#define PCI_POWER_ERROR	((pci_power_t __force) -1)

/* Remember to update this when the list above changes! */
extern const char *pci_power_names[];

static inline const char *pci_power_name(pci_power_t state)
{
	return pci_power_names[1 +