summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-13 17:33:11 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-13 17:33:11 -0800
commit670310dfbae0eefe7318ff6a61e29e67a7a7bbce (patch)
treeeb3ce3aa3e6786a64fec93d410bb6f0b9a56be77
parent43ff2f4db9d0f76452b77cfa645f02b471143b24 (diff)
parentffc661c99f621152d5fdcf53f9df0d48c326318b (diff)
downloadlinux-670310dfbae0eefe7318ff6a61e29e67a7a7bbce.tar.gz
linux-670310dfbae0eefe7318ff6a61e29e67a7a7bbce.tar.bz2
linux-670310dfbae0eefe7318ff6a61e29e67a7a7bbce.zip
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt7
-rw-r--r--Documentation/arm64/silicon-errata.txt1
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt36
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt4
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt3
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt3
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt32
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt4
-rw-r--r--arch/arm/include/asm/arch_gicv3.h5
-rw-r--r--arch/arm64/Kconfig19
-rw-r--r--arch/arm64/Kconfig.platforms3
-rw-r--r--arch/arm64/include/asm/arch_gicv3.h5
-rw-r--r--arch/x86/include/asm/irqdomain.h4
-rw-r--r--arch/x86/kernel/apic/htirq.c5
-rw-r--r--arch/x86/kernel/apic/io_apic.c9
-rw-r--r--arch/x86/platform/uv/uv_irq.c5
-rw-r--r--drivers/gpio/gpio-xgene-sb.c8
-rw-r--r--drivers/iommu/amd_iommu.c5
-rw-r--r--drivers/iommu/intel_irq_remapping.c5
-rw-r--r--drivers/irqchip/Kconfig13
-rw-r--r--drivers/irqchip/Makefile2
-rw-r--r--drivers/irqchip/irq-aspeed-i2c-ic.c4
-rw-r--r--drivers/irqchip/irq-brcmstb-l2.c171
-rw-r--r--drivers/irqchip/irq-gic-common.c5
-rw-r--r--drivers/irqchip/irq-gic-common.h2
-rw-r--r--drivers/irqchip/irq-gic-v3-its.c390
-rw-r--r--drivers/irqchip/irq-gic-v3.c50
-rw-r--r--drivers/irqchip/irq-gic.c71
-rw-r--r--drivers/irqchip/irq-meson-gpio.c419
-rw-r--r--drivers/irqchip/irq-mips-gic.c226
-rw-r--r--drivers/irqchip/irq-omap-intc.c16
-rw-r--r--drivers/irqchip/irq-renesas-intc-irqpin.c9
-rw-r--r--drivers/irqchip/irq-sni-exiu.c227
-rw-r--r--drivers/irqchip/irq-stm32-exti.c206
-rw-r--r--drivers/pinctrl/stm32/pinctrl-stm32.c5
-rw-r--r--include/linux/cpuhotplug.h1
-rw-r--r--include/linux/irq.h22
-rw-r--r--include/linux/irqchip/arm-gic-v3.h4
-rw-r--r--include/linux/irqchip/arm-gic-v4.h9
-rw-r--r--include/linux/irqchip/irq-omap-intc.h2
-rw-r--r--include/linux/irqdesc.h1
-rw-r--r--include/linux/irqdomain.h20
-rw-r--r--include/linux/msi.h5
-rw-r--r--include/trace/events/irq_matrix.h201
-rw-r--r--kernel/irq/Kconfig3
-rw-r--r--kernel/irq/Makefile1
-rw-r--r--kernel/irq/autoprobe.c2
-rw-r--r--kernel/irq/chip.c35
-rw-r--r--kernel/irq/debugfs.c12
-rw-r--r--kernel/irq/internals.h19
-rw-r--r--kernel/irq/irqdesc.c9
-rw-r--r--kernel/irq/irqdomain.c60
-rw-r--r--kernel/irq/manage.c23
-rw-r--r--kernel/irq/matrix.c443
-rw-r--r--kernel/irq/msi.c32
-rw-r--r--kernel/irq/proc.c5
-rw-r--r--kernel/irq_work.c10
57 files changed, 2490 insertions, 408 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 38ed8787261b..b74e13312fdc 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1716,6 +1716,13 @@
irqaffinity= [SMP] Set the default irq affinity mask
The argument is a cpu list, as described above.
+ irqchip.gicv2_force_probe=
+ [ARM, ARM64]
+ Format: <bool>
+ Force the kernel to look for the second 4kB page
+ of a GICv2 controller even if the memory range
+ exposed by the device tree is too small.
+
irqfixup [HW]
When an interrupt is not handled search all handlers
for it. Intended to get systems with badly broken
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index 66e8ce14d23d..304bf22bb83c 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -70,6 +70,7 @@ stable kernels.
| | | | |
| Hisilicon | Hip0{5,6,7} | #161010101 | HISILICON_ERRATUM_161010101 |
| Hisilicon | Hip0{6,7} | #161010701 | N/A |
+| Hisilicon | Hip07 | #161600802 | HISILICON_ERRATUM_161600802 |
| | | | |
| Qualcomm Tech. | Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 |
| Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 |
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
new file mode 100644
index 000000000000..a83f9a5734ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -0,0 +1,36 @@
+Amlogic meson GPIO interrupt controller
+
+Meson SoCs contains an interrupt controller which is able to watch the SoC
+pads and generate an interrupt on edge or level. The controller is essentially
+a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
+or level and polarity. It does not expose all 256 mux inputs because the
+documentation shows that the upper part is not mapped to any pad. The actual
+number of interrupt exposed depends on the SoC.
+
+Required properties:
+
+- compatible : must have "amlogic,meson8-gpio-intc” and either
+ “amlogic,meson8-gpio-intc” for meson8 SoCs (S802) or
+ “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or
+ “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) or
+ “amlogic,meson-gxl-gpio-intc” for GXL SoCs (S905X, S912)
+- interrupt-parent : a phandle to the GIC the interrupts are routed to.
+ Usually this is provided at the root level of the device tree as it is
+ common to most of the SoC.
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 2.
+- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
+ are the hwirqs used on the parent interrupt controller.
+
+Example:
+
+gpio_interrupt: interrupt-controller@9880 {
+ compatible = "amlogic,meson-gxbb-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x9880 0x0 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 5eb108e180fa..0a57f2f4167d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -75,6 +75,10 @@ These nodes must have the following properties:
- reg: Specifies the base physical address and size of the ITS
registers.
+Optional:
+- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated
+ address and size of the pre-ITS window.
+
The main GIC node must contain the appropriate #address-cells,
#size-cells and ranges properties for the reg property of all ITS
nodes.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
index 448273a30a11..36df06c5c567 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
@@ -2,7 +2,8 @@ Broadcom Generic Level 2 Interrupt Controller
Required properties:
-- compatible: should be "brcm,l2-intc"
+- compatible: should be "brcm,l2-intc" for latched interrupt controllers
+ should be "brcm,bcm7271-l2-intc" for level interrupt controllers
- reg: specifies the base physical address and size of the registers
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
index e3f052d8c11a..33c9a10fdc91 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
@@ -13,6 +13,9 @@ Required properties:
- "renesas,irqc-r8a7793" (R-Car M2-N)
- "renesas,irqc-r8a7794" (R-Car E2)
- "renesas,intc-ex-r8a7795" (R-Car H3)
+ - "renesas,intc-ex-r8a7796" (R-Car M3-W)
+ - "renesas,intc-ex-r8a77970" (R-Car V3M)
+ - "renesas,intc-ex-r8a77995" (R-Car D3)
- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
interrupts.txt in this directory
- clocks: Must contain a reference to the functional clock.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
new file mode 100644
index 000000000000..8b2faefe29ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
@@ -0,0 +1,32 @@
+Socionext SynQuacer External Interrupt Unit (EXIU)
+
+The Socionext Synquacer SoC has an external interrupt unit (EXIU)
+that forwards a block of 32 configurable input lines to 32 adjacent
+level-high type GICv3 SPIs.
+
+Required properties:
+
+- compatible : Should be "socionext,synquacer-exiu".
+- reg : Specifies base physical address and size of the
+ control registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 3.
+- interrupt-parent : phandle of the GIC these interrupts are routed to.
+- socionext,spi-base : The SPI number of the first SPI of the 32 adjacent
+ ones the EXIU forwards its interrups to.
+
+Notes:
+
+- Only SPIs can use the EXIU as an interrupt parent.
+
+Example:
+
+ exiu: interrupt-controller@510c0000 {
+ compatible = "socionext,synquacer-exiu";
+ reg = <0x0 0x510c0000 0x0 0x20>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <3>;
+ socionext,spi-base = <112>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
index 6e7703d4ff5b..edf03f09244b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
@@ -2,7 +2,9 @@ STM32 External Interrupt Controller
Required properties:
-- compatible: Should be "st,stm32-exti"
+- compatible: Should be:
+ "st,stm32-exti"
+ "st,stm32h7-exti"
- reg: Specifies base physical address and size of the registers
- interrupt-controller: Indentifies the node as an interrupt controller
- #interrupt-cells: Specifies the number of cells to encode an interrupt
diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index eee269321923..1070044f5c3f 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -196,6 +196,11 @@ static inline void gic_write_ctlr(u32 val)
isb();
}
+static inline u32 gic_read_ctlr(void)
+{
+ return read_sysreg(ICC_CTLR);
+}
+
static inline void gic_write_grpen1(u32 val)
{
write_sysreg(val, ICC_IGRPEN1);
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index df02ad932020..6205f521b648 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -556,6 +556,25 @@ config QCOM_QDF2400_ERRATUM_0065
If unsure, say Y.
+
+config SOCIONEXT_SYNQUACER_PREITS
+ bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
+ default y
+ help
+ Socionext Synquacer SoCs implement a separate h/w block to generate
+ MSI doorbell writes with non-zero values for the device ID.
+
+ If unsure, say Y.
+
+config HISILICON_ERRATUM_161600802
+ bool "Hip07 161600802: Erroneous redistributor VLPI base"
+ default y
+ help
+ The HiSilicon Hip07 SoC usees the wrong redistributor base
+ when issued ITS commands such as VMOVP and VMAPP, and requires
+ a 128kB offset to be applied to the target address in this commands.
+
+ If unsure, say Y.
endmenu
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6b54ee8c1262..1d03ef54295a 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -161,6 +161,9 @@ config ARCH_SEATTLE
config ARCH_SHMOBILE
bool
+config ARCH_SYNQUACER
+ bool "Socionext SynQuacer SoC Family"
+
config ARCH_RENESAS
bool "Renesas SoC Platforms"
select ARCH_SHMOBILE
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index b7e3f74822da..9becba9ab392 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -87,6 +87,11 @@ static inline void gic_write_ctlr(u32 val)
isb();
}
+static inline u32 gic_read_ctlr(void)
+{
+ return read_sysreg_s(SYS_ICC_CTLR_EL1);
+}
+
static inline void gic_write_grpen1(u32 val)
{
write_sysreg_s(val, SYS_ICC_IGRPEN1_EL1);
diff --git a/arch/x86/include/asm/irqdomain.h b/arch/x86/include/asm/irqdomain.h
index 423e112c1e8f..e2a51ee1236f 100644
--- a/arch/x86/include/asm/irqdomain.h
+++ b/arch/x86/include/asm/irqdomain.h
@@ -42,8 +42,8 @@ extern int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs, void *arg);
extern void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs);
-extern void mp_irqdomain_activate(struct irq_domain *domain,
- struct irq_data *irq_data);
+extern int mp_irqdomain_activate(struct irq_domain *domain,
+ struct irq_data *irq_data, bool early);
extern void mp_irqdomain_deactivate(struct irq_domain *domain,
struct irq_data *irq_data);
extern int mp_irqdomain_ioapic_idx(struct irq_domain *domain);
diff --git a/arch/x86/kernel/apic/htirq.c b/arch/x86/kernel/apic/htirq.c
index 56ccf9346b08..b07075dce8b7 100644
--- a/arch/x86/kernel/apic/htirq.c
+++ b/arch/x86/kernel/apic/htirq.c
@@ -112,8 +112,8 @@ static void htirq_domain_free(struct irq_domain *domain, unsigned int virq,
irq_domain_free_irqs_top(domain, virq, nr_irqs);
}
-static void htirq_domain_activate(struct irq_domain *domain,
- struct irq_data *irq_data)
+static int htirq_domain_activate(struct irq_domain *domain,
+ struct irq_data *irq_data, bool early)
{
struct ht_irq_msg msg;
struct irq_cfg *cfg = irqd_cfg(irq_data);
@@ -132,6 +132,7 @@ static void htirq_domain_activate(struct irq_domain *domain,
HT_IRQ_LOW_MT_ARBITRATED) |
HT_IRQ_LOW_IRQ_MASKED;
write_ht_irq_msg(irq_data->irq, &msg);
+ return 0;
}
static void htirq_domain_deactivate(struct irq_domain *domain,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 3b89b27945ff..18c8aca5bae7 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2097,7 +2097,7 @@ static inline void __init check_timer(void)
unmask_ioapic_irq(irq_get_irq_data(0));
}
irq_domain_deactivate_irq(irq_data);
- irq_domain_activate_irq(irq_data);
+ irq_domain_activate_irq(irq_data, false);
if (timer_irq_works()) {
if (disable_timer_pin_1 > 0)
clear_IO_APIC_pin(0, pin1);
@@ -2119,7 +2119,7 @@ static inline void __init check_timer(void)
*/
replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2);
irq_domain_deactivate_irq(irq_data);
- irq_domain_activate_irq(irq_data);
+ irq_domain_activate_irq(irq_data, false);
legacy_pic->unmask(0);
if (timer_irq_works()) {
apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
@@ -2978,8 +2978,8 @@ void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
irq_domain_free_irqs_top(domain, virq, nr_irqs);
}
-void mp_irqdomain_activate(struct irq_domain *domain,
- struct irq_data *irq_data)
+int mp_irqdomain_activate(struct irq_domain *domain,
+ struct irq_data *irq_data, bool early)
{
unsigned long flags;
struct irq_pin_list *entry;
@@ -2989,6 +2989,7 @@ void mp_irqdomain_activate(struct irq_domain *domain,
for_each_irq_pin(entry, data->irq_2_pin)
__ioapic_write_entry(entry->apic, entry->pin, data->entry);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+ return 0;
}
void mp_irqdomain_deactivate(struct irq_domain *domain,
diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c
index 03fc397335b7..5f6fd860820a 100644
--- a/arch/x86/platform/uv/uv_irq.c
+++ b/arch/x86/platform/uv/uv_irq.c
@@ -127,10 +127,11 @@ static void uv_domain_free(struct irq_domain *domain, unsigned int virq,
* Re-target the irq to the specified CPU and enable the specified MMR located
* on the specified blade to allow the sending of MSIs to the specified CPU.
*/
-static void uv_domain_activate(struct irq_domain *domain,
- struct irq_data *irq_data)
+static int uv_domain_activate(struct irq_domain *domain,
+ struct irq_data *irq_data, bool early)
{
uv_program_mmr(irqd_cfg(irq_data), irq_data->chip_data);
+ return 0;
}
/*
diff --git a/drivers/gpio/gpio-xgene-sb.c b/drivers/gpio/gpio-xgene-sb.c
index 033258634b8c..b5843fe6a44d 100644
--- a/drivers/gpio/gpio-xgene-sb.c
+++ b/drivers/gpio/gpio-xgene-sb.c
@@ -140,8 +140,9 @@ static int xgene_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio)
return irq_create_fwspec_mapping(&fwspec);
}
-static void xgene_gpio_sb_domain_activate(struct irq_domain *d,
- struct irq_data *irq_data)
+static int xgene_gpio_sb_domain_activate(struct irq_domain *d,
+ struct irq_data *irq_data,
+ bool early)
{
struct xgene_gpio_sb *priv = d->host_data;
u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq);
@@ -150,11 +151,12 @@ static void xgene_gpio_sb_domain_activate(struct irq_domain *d,
dev_err(priv->gc.parent,
"Unable to configure XGene GPIO standby pin %d as IRQ\n",
gpio);
- return;
+ return -ENOSPC;
}
xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
gpio * 2, 1);
+ return 0;
}
static void xgene_gpio_sb_domain_deactivate(struct irq_domain *d,
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 8e8874d23717..330856803e90 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -4173,8 +4173,8 @@ static void irq_remapping_free(struct irq_domain *domain, unsigned int virq,
irq_domain_free_irqs_common(domain, virq, nr_irqs);
}
-static void irq_remapping_activate(struct irq_domain *domain,
- struct irq_data *irq_data)
+static int irq_remapping_activate(struct irq_domain *domain,
+ struct irq_data *irq_data, bool early)
{
struct amd_ir_data *data = irq_data->chip_data;
struct irq_2_irte *irte_info = &data->irq_2_irte;
@@ -4183,6 +4183,7 @@ static void irq_remapping_activate(struct irq_domain *domain,
if (iommu)
iommu->irte_ops->activate(data->entry, irte_info->devid,
irte_info->index);
+ return 0;
}
static void irq_remapping_deactivate(struct irq_domain *domain,
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 25842b566c39..324163330eaa 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -1390,12 +1390,13 @@ static void intel_irq_remapping_free(struct irq_domain *domain,
irq_domain_free_irqs_common(domain, virq, nr_irqs);
}
-static void intel_irq_remapping_activate(struct irq_domain *domain,
- struct irq_data *irq_data)
+static int intel_irq_remapping_activate(struct irq_domain *domain,
+ struct irq_data *irq_data, bool early)
{
struct intel_ir_data *data = irq_data->chip_data;
modify_irte(&data->irq_2_iommu, &data->irte_entry);
+ return 0;
}
static void intel_irq_remapping_deactivate(struct irq_domain *domain,
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index a2ca82f6c2dd..53380bd72ea4 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -1,3 +1,5 @@
+menu "IRQ chip support"
+
config IRQCHIP
def_bool y
depends on OF_IRQ
@@ -307,6 +309,7 @@ config EZNPS_GIC
config STM32_EXTI
bool
select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
config QCOM_IRQ_COMBINER
bool "QCOM IRQ combiner support"
@@ -324,3 +327,13 @@ config IRQ_UNIPHIER_AIDET
select IRQ_DOMAIN_HIERARCHY
help
Support for the UniPhier AIDET (ARM Interrupt Detector).
+
+config MESON_IRQ_GPIO
+ bool "Meson GPIO Interrupt Multiplexer"
+ depends on ARCH_MESON
+ select IRQ_DOMAIN
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ Support Meson SoC Famil