Merge tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.8 kernel cycle.

  Nothing stands out as especially exiting: new drivers, new subdrivers,
  lots of cleanups and incremental features.

  Business as usual.

  New drivers:

   - New driver for Oxnas pin control and GPIO.  This ARM-based chipset
     is used in a few storage (NAS) type devices.

   - New driver for the MAX77620/MAX20024 pin controller portions.

   - New driver for the Intel Merrifield pin controller.

  New subdrivers:

   - New subdriver for the Qualcomm MDM9615

   - New subdriver for the STM32F746 MCU

   - New subdriver for the Broadcom NSP SoC.

  Cleanups:

   - Demodularization of bool compiled-in drivers.

  Apart from this there is just regular incremental improvements to a
  lot of drivers, especially Uniphier and PFC"

* tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits)
  pinctrl: fix pincontrol definition for marvell
  pinctrl: xway: fix typo
  Revert "pinctrl: amd: make it explicitly non-modular"
  pinctrl: iproc: Add NSP and Stingray GPIO support
  pinctrl: Update iProc GPIO DT bindings
  pinctrl: bcm: add OF dependencies
  pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe()
  pinctrl: Add STM32F746 MCU support
  pinctrl: intel: Protect set wake flow by spin lock
  pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe()
  pinctrl: uniphier: add Ethernet pin-mux settings
  sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code
  pinctrl: ns2: fix return value check in ns2_pinmux_probe()
  pinctrl: qcom: update DT bindings with ebi2 groups
  pinctrl: qcom: establish proper EBI2 pin groups
  pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro
  Documentation: dt: Add new compatible to STM32 pinctrl driver bindings
  includes: dt-bindings: Add STM32F746 pinctrl DT bindings
  pinctrl: sunxi: fix nand0 function name for sun8i
  pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11
  ...

119 files changed, 12550 insertions, 2698 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
new file mode 100644
index 000000000000..928ed4f43907
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
@@ -0,0 +1,47 @@
+* Oxford Semiconductor OXNAS SoC GPIO Controller
+
+Please refer to gpio.txt for generic information regarding GPIO bindings.
+
+Required properties:
+ - compatible: "oxsemi,ox810se-gpio"
+ - reg: Base address and length for the device.
+ - interrupts: The port interrupt shared by all pins.
+ - gpio-controller: Marks the port as GPIO controller.
+ - #gpio-cells: Two. The first cell is the pin number and
+   the second cell is used to specify the gpio polarity as defined in
+   defined in <dt-bindings/gpio/gpio.h>:
+      0 = GPIO_ACTIVE_HIGH
+      1 = GPIO_ACTIVE_LOW
+ - interrupt-controller: Marks the device node as an interrupt controller.
+ - #interrupt-cells: Two. The first cell is the GPIO number and second cell
+   is used to specify the trigger type as defined in
+   <dt-bindings/interrupt-controller/irq.h>:
+      IRQ_TYPE_EDGE_RISING
+      IRQ_TYPE_EDGE_FALLING
+      IRQ_TYPE_EDGE_BOTH
+ - gpio-ranges: Interaction with the PINCTRL subsystem, it also specifies the
+   gpio base and count, should be in the format of numeric-gpio-range as
+   specified in the gpio.txt file.
+
+Example:
+
+gpio0: gpio@0 {
+	compatible = "oxsemi,ox810se-gpio";
+	reg = <0x000000 0x100000>;
+	interrupts = <21>;
+	#gpio-cells = <2>;
+	gpio-controller;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	gpio-ranges = <&pinctrl 0 0 32>;
+};
+
+keys {
+	...
+
+	button-esc {
+		label = "ESC";
+		linux,code = <1>;
+		gpios = <&gpio0 12 0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
index e4277921f3e3..a73cbeb0f309 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
+++ b/