Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "New hardware support:

   - ST STM32MP25 combophy support

   - Sparx5 support for lan969x serdes and updates to driver to support
     this

   - NXP PTN3222 eUSB2 to USB2 redriver

   - Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
     support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
     UFS PHY support and SA8775P eDP PHY support

   - Rockchip rk3576 usbdp and rk3576 usb2 phy support

   - Binding for Microchip ATA6561 can phy

  Updates:

   - Freescale driver updates from hdmi support

   - Conversion of rockchip rk3228 hdmi phy binding to yaml

   - Broadcom usb2-phy deprecated support dropped and USB init array
     update for BCM4908

   - TI USXGMII mode support in J7200

   - Switch back to platform_driver::remove() subsystem update"

* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
  phy: qcom: qmp: Fix lecacy-legacy typo
  phy: lan969x-serdes: add support for lan969x serdes driver
  dt-bindings: phy: sparx5: document lan969x
  phy: sparx5-serdes: add support for branching on chip type
  phy: sparx5-serdes: add indirection layer to register macros
  phy: sparx5-serdes: add function for getting the CMU index
  phy: sparx5-serdes: add ops to match data
  phy: sparx5-serdes: add constant for the number of CMU's
  phy: sparx5-serdes: add constants to match data
  phy: sparx5-serdes: add support for private match data
  phy: bcm-ns-usb2: drop support for old binding variant
  dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
  dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
  dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
  dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
  phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
  phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
  phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
  phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
  phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
  ...

1 files changed, 55 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml b/Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml
new file mode 100644
index 000000000000..acec5bb2391d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nxp,ptn3222.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3222 1-port eUSB2 to USB2 redriver
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - nxp,ptn3222
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  vdd1v8-supply:
+    description: power supply (1.8V)
+
+  vdd3v3-supply:
+    description: power supply (3.3V)
+
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        redriver@4f {
+            compatible = "nxp,ptn3222";
+            reg = <0x4f>;
+            #phy-cells = <0>;
+            vdd3v3-supply = <&vreg_3p3>;
+            vdd1v8-supply = <&vreg_1p8>;
+            reset-gpios = <&gpio_reset GPIO_ACTIVE_LOW>;
+        };
+    };
+...