Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "New hardware support:

   - ST STM32MP25 combophy support

   - Sparx5 support for lan969x serdes and updates to driver to support
     this

   - NXP PTN3222 eUSB2 to USB2 redriver

   - Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
     support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
     UFS PHY support and SA8775P eDP PHY support

   - Rockchip rk3576 usbdp and rk3576 usb2 phy support

   - Binding for Microchip ATA6561 can phy

  Updates:

   - Freescale driver updates from hdmi support

   - Conversion of rockchip rk3228 hdmi phy binding to yaml

   - Broadcom usb2-phy deprecated support dropped and USB init array
     update for BCM4908

   - TI USXGMII mode support in J7200

   - Switch back to platform_driver::remove() subsystem update"

* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
  phy: qcom: qmp: Fix lecacy-legacy typo
  phy: lan969x-serdes: add support for lan969x serdes driver
  dt-bindings: phy: sparx5: document lan969x
  phy: sparx5-serdes: add support for branching on chip type
  phy: sparx5-serdes: add indirection layer to register macros
  phy: sparx5-serdes: add function for getting the CMU index
  phy: sparx5-serdes: add ops to match data
  phy: sparx5-serdes: add constant for the number of CMU's
  phy: sparx5-serdes: add constants to match data
  phy: sparx5-serdes: add support for private match data
  phy: bcm-ns-usb2: drop support for old binding variant
  dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
  dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
  dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
  dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
  phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
  phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
  phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
  phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
  phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
  ...

1 files changed, 0 insertions, 43 deletions

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
deleted file mode 100644
index 710cccd5ee56..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-ROCKCHIP HDMI PHY WITH INNO IP BLOCK
-
-Required properties:
- - compatible : should be one of the listed compatibles:
-	* "rockchip,rk3228-hdmi-phy",
-	* "rockchip,rk3328-hdmi-phy";
- - reg : Address and length of the hdmi phy control register set
- - clocks : phandle + clock specifier for the phy clocks
- - clock-names : string, clock name, must contain "sysclk" for system
-	  control and register configuration, "refoclk" for crystal-
-	  oscillator reference PLL clock input and "refpclk" for pclk-
-	  based refeference PLL clock input.
- - #clock-cells: should be 0.
- - clock-output-names : shall be the name for the output clock.
- - interrupts : phandle + interrupt specified for the hdmiphy interrupt
- - #phy-cells : must be 0. See ./phy-bindings.txt for details.
-
-Optional properties for rk3328-hdmi-phy:
- - nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
- - nvmem-cell-names : "cpu-version" to read the chip version, required
-	  for adjustment to some frequency settings
-
-Example:
-	hdmi_phy: hdmi-phy@12030000 {
-		compatible = "rockchip,rk3228-hdmi-phy";
-		reg = <0x12030000 0x10000>;
-		#phy-cells = <0>;
-		clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
-		clock-names = "sysclk", "refoclk", "refpclk";
-		#clock-cells = <0>;
-		clock-output-names = "hdmi_phy";
-		status = "disabled";
-	};
-
-Then the PHY can be used in other nodes such as:
-
-	hdmi: hdmi@200a0000 {
-		compatible = "rockchip,rk3228-dw-hdmi";
-		...
-		phys = <&hdmi_phy>;
-		phy-names = "hdmi";
-		...
-	};