Merge tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for X-Powers AXP717 PMIC to AXP22X
   - Add support for Rockchip RK816 PMIC to RK8XX
   - Add support for TI TPS65224 PMIC to TPS6594

  New Functionality:
   - Add Power Off functionality to Rohm BD71828
   - Allow I2C SMBus access in Renesas RSMU

  Fix-ups:
   - Device Tree binding adaptions/conversions/creation
   - Shift Intel support over to MSI interrupts
   - Generify adding platform data away from being ACPI specific
   - Use device core supplied attribute to register sysfs entries
   - Replace hand-rolled functionality with generic APIs
   - Utilise centrally provided helpers and macros
   - Clean-up error handling
   - Remove superfluous/duplicated/unused sections
   - Trivial; spelling, whitespace, coding-style adaptions
   - More Maple Tree conversions"

* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
  dt-bindings: mfd: Use full path to other schemas
  mfd: rsmu: support I2C SMBus access
  dt-bindings: mfd: Convert lp873x.txt to json-schema
  dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
  dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
  mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
  mfd: kempld: Remove custom DMI matching code
  mfd: cs42l43: Update patching revision check
  dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
  mfd: timberdale: Remove redundant assignment to variable err
  dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
  dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
  dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
  mfd: axp20x: Convert to use Maple Tree register cache
  mfd: bd71828: Remove commented code lines
  mfd: intel-m10-bmc: Change staging size to a variable
  dt-bindings: mfd: Add ROHM BD71879
  mfd: Tidy Kconfig dependency's parentheses
  mfd: ocelot-spi: Use spi_sync_transfer()
  dt-bindings: mfd: syscon: Add missing simple syscon compatibles
  ...

48 files changed, 606 insertions, 316 deletions

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
deleted file mode 100644
index 77ca635765e1..000000000000
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Altera SOCFPGA SDRAM Controller
-
-Required properties:
-- compatible : Should contain "altr,sdr-ctl" and "syscon".
-  syscon is required by the Altera SOCFPGA SDRAM EDAC.
-- reg : Should contain 1 register range (address and length)
-
-Example:
-	sdr: sdr@ffc25000 {
-		compatible = "altr,sdr-ctl", "syscon";
-		reg = <0xffc25000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/apm/scu.txt b/Documentation/devicetree/bindings/arm/apm/scu.txt
deleted file mode 100644
index b45be06625fd..000000000000
--- a/Documentation/devicetree/bindings/arm/apm/scu.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-APM X-GENE SoC series SCU Registers
-
-This system clock unit contain various register that control block resets,
-clock enable/disables, clock divisors and other deepsleep registers.
-
-Properties:
- - compatible : should contain two values. First value must be:
-		   - "apm,xgene-scu"
-		second value must be always "syscon".
-
- - reg : offset and length of the register set.
-
-Example :
-	scu: system-clk-controller@17000000 {
-		compatible = "apm,xgene-scu","syscon";
-		reg = <0x0 0x17000000 0x0 0x400>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
deleted file mode 100644
index 29fa93dad52b..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Power management
-----------------
-
-For power management (particularly DVFS and AVS), the North Bridge
-Power Management component is needed:
-
-Required properties:
-- compatible     : should contain "marvell,armada-3700-nb-pm", "syscon";
-- reg            : the register start and length for the North Bridge
-		    Power Management
-
-Example:
-
-nb_pm: syscon@14000 {
-	compatible = "marvell,armada-3700-nb-pm", "syscon";
-	reg = <0x14000 0x60>;
-}
-
-AVS
----
-
-For AVS an other component is needed:
-
-Required properties:
-- compatible     : should contain "marvell,armada-3700-avs", "syscon";
-- reg            : the register start and length for the AVS
-
-Example:
-avs: avs@11500 {
-	compatible = "marvell,armada-3700-avs", "syscon";
-	reg = <0x11500 0x40>;
-}
diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
deleted file mode 100644
index 6c201a2ba8ac..000000000000
--- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Texas Instruments TWL family (twl4030) pwrbutton module
-
-This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/ti,twl.yaml.
-
-This module provides a simple power button event via an Interrupt.
-
-Required properties:
-- compatible: should be one of the following
-   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
-- interrupts: should be one of the following
-   - <8>: For controllers compatible with twl4030
-
-Example:
-
-&twl {
-	twl_pwrbutton: pwrbutton {
-		compatible = "ti,twl4030-pwrbutton";
-		interrupts = <8>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
index 6811246c5771..9ae419748aa7 100644
--- a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
+++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
@@ -21,7 +21,7 @@ description: |
   regulators.
 
 allOf:
-  - $ref: ../input/input.yaml
+  - $ref: /schemas/input/input.yaml
 
 properties:
   compatible:
@@ -57,7 +57,7 @@ properties:
 
       switchldo1:
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true
@@ -76,7 +76,7 @@ properties:
 
       "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
index 8789e3639ff7..ca0e9f1f2354 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
@@ -20,7 +20,7 @@ properties:
     maxItems: 1
 
 patternProperties:
-  "^.*_(clk|rst)$":
+  "^.*-(clk|rst)$":
     type: object
     unevaluatedProperties: false
 
@@ -171,7 +171,7 @@ examples:
         compatible = "allwinner,sun6i-a31-prcm";
         reg = <0x01f01400 0x200>;
 
-        ar100: ar100_clk {
+        ar100: ar100-clk {
             compatible = "allwinner,sun6i-a31-ar100-clk";
             #clock-cells = <0>;
             clocks = <&rtc 0>, <&osc24M>,
@@ -180,7 +180,7 @@ examples:
             clock-output-names = "ar100";
         };
 
-        ahb0: ahb0_clk {
+        ahb0: ahb0-clk {
             compatible = "fixed-factor-clock";
             #clock-cells = <0>;
             clock-div = <1>;
@@ -189,14 +189,14 @@ examples:
             clock-output-names = "ahb0";
         };
 
-        apb0: apb0_clk {
+        apb0: apb0-clk {
             compatible = "allwinner,sun6i-a31-apb0-clk";
             #clock-cells = <0>;
             clocks = <&ahb0>;
             clock-output-names = "apb0";
         };
 
-        apb0_gates: apb0_gates_clk {
+        apb0_gates: apb0-gates-clk {
             compatible = "allwinner,sun6i-a31-apb0-gates-clk";
             #clock-cells = <1>;
             clocks = <&apb0>;
@@ -206,14 +206,14 @@ examples:
                                  "apb0_i2c";
         };
 
-        ir_clk: ir_clk {
+        ir_clk: ir-clk {
             #clock-cells = <0>;
             compatible = "allwinner,sun4i-a10-mod0-clk";
             clocks = <&rtc 0>, <&osc24M>;
             clock-output-names = "ir";
         };
 
-        apb0_rst: apb0_rst {
+        apb0_rst: apb0-rst {
             compatible = "allwinner,sun6i-a31-clock-reset";
             #reset-cells = <1>;
         };
diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
index 1689b986f441..86ee69c0f45b 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
+++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
@@ -47,10 +47,18 @@ patternProperties:
     type: object
 
   '^pinctrl(@[0-9a-f]+)?$':
-    oneOf:
-      - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml
-      - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml
-      - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          enum:
+            - aspeed,ast2400-pinctrl
+            - aspeed,ast2500-pinctrl
+            - aspeed,ast2600-pinctrl
+
+    required:
+      - compatible
 
   '^interrupt-controller@[0-9a-f]+$':
     description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
index b85819fbb07c..04910e4f88b2 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -34,19 +34,19 @@ properties:
 
 patternProperties:
   '^clock-controller@[a-f0-9]+$':
-    $ref: ../clock/brcm,iproc-clocks.yaml
+    $ref: /schemas/clock/brcm,iproc-clocks.yaml
 
   '^phy@[a-f0-9]+$':
-    $ref: ../phy/bcm-ns-usb2-phy.yaml
+    $ref: /schemas/phy/bcm-ns-usb2-phy.yaml
 
   '^pinctrl@[a-f0-9]+$':
-    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+    $ref: /schemas/pinctrl/brcm,ns-pinmux.yaml
 
   '^syscon@[a-f0-9]+$':
     $ref: syscon.yaml
 
   '^thermal@[a-f0-9]+$':
-    $ref: ../thermal/brcm,ns-thermal.yaml
+    $ref: /schemas/thermal/brcm,ns-thermal.yaml
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
deleted file mode 100644
index 82f82e069563..000000000000
--- a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Broadcom iProc Chip Device Resource Unit (CDRU)
-
-Various Broadcom iProc SoCs have a set of registers that provide various
-chip specific device and resource configurations. This node allows access to
-these CDRU registers via syscon.
-
-Required properties:
-- compatible: should contain:
-		"brcm,sr-cdru", "syscon" for Stingray
-- reg: base address and range of the CDRU registers
-
-Example:
-	cdru: syscon@6641d000 {
-		compatible = "brcm,sr-cdru", "syscon";
-		reg = <0 0x6641d000 0 0x400>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
deleted file mode 100644
index 4421e9771b8a..000000000000
--- a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Broadcom iProc Multi Host Bridge (MHB)
-
-Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls
-the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint
-interface; 3) access to the Nitro (network processing) engine
-
-This node allows access to these MHB registers via syscon.
-
-Required properties:
-- compatible: should contain:
-		"brcm,sr-mhb", "syscon" for Stingray
-- reg: base address and range of the MHB registers
-
-Example:
-	mhb: syscon@60401000 {
-		compatible = "brcm,sr-mhb", "syscon";
-		reg = <0 0x60401000 0 0x38c>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
index cff7d772a7db..abe24526f3d7 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
@@ -33,7 +33,7 @@ properties:
 
 patternProperties:
   '^reset-controller@[a-f0-9]+$':
-    $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml
+    $ref: /schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
index 3b3beab9db3f..2451d0f0e4e3 100644
--- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
@@ -36,7 +36,7 @@ properties:
   clock-controller:
     # Child node
     type: object
-    $ref: ../clock/canaan,k210-clk.yaml
+    $ref: /schemas/clock/canaan,k210-clk.yaml
     description:
       Clock controller for the SoC clocks. This child node definition
       should follow the bindings specified in
@@ -45,7 +45,7 @@ properties:
   reset-controller:
     # Child node
     type: object
-    $ref: ../reset/canaan,k210-rst.yaml
+    $ref: /schemas/reset/canaan,k210-rst.yaml
     description:
       Reset controller for the SoC. This child node definition
       should follow the bindings specified in
@@ -54,7 +54,7 @@ properties:
   syscon-reboot:
     # Child node
     type: object
-    $ref: ../power/reset/syscon-reboot.yaml
+    $ref: /schemas/power/reset/syscon-reboot.yaml
     description:
       Reboot method for the SoC. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
index f6967c1f6235..d3b79140cce2 100644
--- a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
+++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
@@ -42,10 +42,10 @@ required:
 
 patternProperties:
   "^gpio(@[0-9a-f]+)?$":
-    $ref: ../gpio/delta,tn48m-gpio.yaml
+    $ref: /schemas/gpio/delta,tn48m-gpio.yaml
 
   "^reset-controller?$":
-    $ref: ../reset/delta,tn48m-reset.yaml
+    $ref: /schemas/reset/delta,tn48m-reset.yaml
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
index f438c2374966..e79ce447a800 100644
--- a/Documentation/devicetree/bindings/mfd/iqs62x.yaml
+++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
@@ -38,10 +38,10 @@ properties:
       device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A).
 
   keys:
-    $ref: ../input/iqs62x-keys.yaml
+    $ref: /schemas/input/iqs62x-keys.yaml
 
   pwm:
-    $ref: ../pwm/iqs620a-pwm.yaml
+    $ref: /schemas/pwm/iqs620a-pwm.yaml
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
index eb3b43547cb6..37207a97e06c 100644
--- a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
+++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
@@ -39,19 +39,19 @@ properties:
 
 patternProperties:
   "^gpio(@[0-9a-f]+)?$":
-    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+    $ref: /schemas/gpio/kontron,sl28cpld-gpio.yaml
 
   "^hwmon(@[0-9a-f]+)?$":
-    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+    $ref: /schemas/hwmon/kontron,sl28cpld-hwmon.yaml
 
   "^interrupt-controller(@[0-9a-f]+)?$":
-    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+    $ref: /schemas/interrupt-controller/kontron,sl28cpld-intc.yaml
 
   "^pwm(@[0-9a-f]+)?$":
-    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+    $ref: /schemas/pwm/kontron,sl28cpld-pwm.yaml
 
   "^watchdog(@[0-9a-f]+)?$":
-    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+    $ref: /schemas/watchdog/kontron,sl28cpld-wdt.yaml
 
 required:
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
deleted file mode 100644
index ae9cf39bd101..000000000000
--- a/Documentation/devicetree/bindings/mfd/lp873x.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-TI LP873X PMIC MFD driver
-
-Required properties:
-  - compatible:	"ti,lp8732", "ti,lp8733"
-  - reg:		I2C slave address.
-  - gpio-controller:	Marks the device node as a GPIO Controller.
-  - #gpio-cells:	Should be two.  The first cell is the pin number and
-			the second cell is used to specify flags.
-			See ../gpio/gpio.txt for more information.
-  - xxx-in-supply:	Phandle to parent supply node of each regulator
-			populated under regulators node. xxx can be
-			buck0, buck1, ldo0 or ldo1.
-  - regulators:	List of child nodes that specify the regulator
-			initialization data.
-Example:
-
-pmic: lp8733@60 {
-	compatible = "ti,lp8733";
-	reg = <0x60>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	buck0-in-supply = <&vsys_3v3>;
-	buck1-in-supply = <&vsys_3v3>;
-	ldo0-in-supply = <&vsys_3v3>;
-	ldo1-in-supply = <&vsys_3v3>;
-
-	regulators {
-		lp8733_buck0: buck0 {
-			regulator-name = "lp8733-buck0";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-min-microamp = <1500000>;
-			regulator-max-microamp = <4000000>;
-			regulator-ramp-delay = <10000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		lp8733_buck1: buck1 {
-			regulator-name = "lp8733-buck1";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-min-microamp = <1500000>;
-			regulator-max-microamp = <4000000>;
-			regulator-ramp-delay = <10000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		lp8733_ldo0: ldo0 {
-			regulator-name = "lp8733-ldo0";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		lp8733_ldo1: ldo1 {
-			regulator-name = "lp8733-ldo1";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
index 4181174fcf58..d93d84171a31 100644
--- a/Documentation/devicetree/bindings/mfd/max77650.yaml
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@@ -53,16 +53,16 @@ properties:
       Single string containing the name of the GPIO line.
 
   regulators:
-    $ref: ../regulator/max77650-regulator.yaml
+    $ref: /schemas/regulator/max77650-regulator.yaml
 
   charger:
-    $ref: ../power/supply/max77650-charger.yaml
+    $ref: /schemas/power/supply/max77650-charger.yaml
 
   leds:
-    $ref: ../leds/leds-max77650.yaml
+    $ref: /schemas/leds/leds-max77650.yaml
 
   onkey:
-    $ref: ../input/max77650-onkey.yaml
+    $ref: /schemas/input/max77650-onkey.yaml
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
index d027aabe453b..c13d51e462ba 100644
--- a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
@@ -35,7 +35,7 @@ properties:
     maxItems: 1
 
   voltage-regulators:
-    $ref: ../regulator/maxim,max77686.yaml
+    $ref: /schemas/regulator/maxim,max77686.yaml
     description:
       List of child nodes that specify the regulators.
 
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
index 6a6f222b868f..cce273ba4034 100644
--- a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml