diff options
Diffstat (limited to 'Documentation')
48 files changed, 606 insertions, 316 deletions
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt deleted file mode 100644 index 77ca635765e1..000000000000 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt +++ /dev/null @@ -1,12 +0,0 @@ -Altera SOCFPGA SDRAM Controller - -Required properties: -- compatible : Should contain "altr,sdr-ctl" and "syscon". - syscon is required by the Altera SOCFPGA SDRAM EDAC. -- reg : Should contain 1 register range (address and length) - -Example: - sdr: sdr@ffc25000 { - compatible = "altr,sdr-ctl", "syscon"; - reg = <0xffc25000 0x1000>; - }; diff --git a/Documentation/devicetree/bindings/arm/apm/scu.txt b/Documentation/devicetree/bindings/arm/apm/scu.txt deleted file mode 100644 index b45be06625fd..000000000000 --- a/Documentation/devicetree/bindings/arm/apm/scu.txt +++ /dev/null @@ -1,17 +0,0 @@ -APM X-GENE SoC series SCU Registers - -This system clock unit contain various register that control block resets, -clock enable/disables, clock divisors and other deepsleep registers. - -Properties: - - compatible : should contain two values. First value must be: - - "apm,xgene-scu" - second value must be always "syscon". - - - reg : offset and length of the register set. - -Example : - scu: system-clk-controller@17000000 { - compatible = "apm,xgene-scu","syscon"; - reg = <0x0 0x17000000 0x0 0x400>; - }; diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt deleted file mode 100644 index 29fa93dad52b..000000000000 --- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt +++ /dev/null @@ -1,32 +0,0 @@ -Power management ----------------- - -For power management (particularly DVFS and AVS), the North Bridge -Power Management component is needed: - -Required properties: -- compatible : should contain "marvell,armada-3700-nb-pm", "syscon"; -- reg : the register start and length for the North Bridge - Power Management - -Example: - -nb_pm: syscon@14000 { - compatible = "marvell,armada-3700-nb-pm", "syscon"; - reg = <0x14000 0x60>; -} - -AVS ---- - -For AVS an other component is needed: - -Required properties: -- compatible : should contain "marvell,armada-3700-avs", "syscon"; -- reg : the register start and length for the AVS - -Example: -avs: avs@11500 { - compatible = "marvell,armada-3700-avs", "syscon"; - reg = <0x11500 0x40>; -} diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt deleted file mode 100644 index 6c201a2ba8ac..000000000000 --- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt +++ /dev/null @@ -1,21 +0,0 @@ -Texas Instruments TWL family (twl4030) pwrbutton module - -This module is part of the TWL4030. For more details about the whole -chip see Documentation/devicetree/bindings/mfd/ti,twl.yaml. - -This module provides a simple power button event via an Interrupt. - -Required properties: -- compatible: should be one of the following - - "ti,twl4030-pwrbutton": For controllers compatible with twl4030 -- interrupts: should be one of the following - - <8>: For controllers compatible with twl4030 - -Example: - -&twl { - twl_pwrbutton: pwrbutton { - compatible = "ti,twl4030-pwrbutton"; - interrupts = <8>; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml index 6811246c5771..9ae419748aa7 100644 --- a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml +++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml @@ -21,7 +21,7 @@ description: | regulators. allOf: - - $ref: ../input/input.yaml + - $ref: /schemas/input/input.yaml properties: compatible: @@ -57,7 +57,7 @@ properties: switchldo1: type: object - $ref: ../regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml properties: regulator-name: true @@ -76,7 +76,7 @@ properties: "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$": type: object - $ref: ../regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml properties: regulator-name: true diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml index 8789e3639ff7..ca0e9f1f2354 100644 --- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml @@ -20,7 +20,7 @@ properties: maxItems: 1 patternProperties: - "^.*_(clk|rst)$": + "^.*-(clk|rst)$": type: object unevaluatedProperties: false @@ -171,7 +171,7 @@ examples: compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; - ar100: ar100_clk { + ar100: ar100-clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; clocks = <&rtc 0>, <&osc24M>, @@ -180,7 +180,7 @@ examples: clock-output-names = "ar100"; }; - ahb0: ahb0_clk { + ahb0: ahb0-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -189,14 +189,14 @@ examples: clock-output-names = "ahb0"; }; - apb0: apb0_clk { + apb0: apb0-clk { compatible = "allwinner,sun6i-a31-apb0-clk"; #clock-cells = <0>; clocks = <&ahb0>; clock-output-names = "apb0"; }; - apb0_gates: apb0_gates_clk { + apb0_gates: apb0-gates-clk { compatible = "allwinner,sun6i-a31-apb0-gates-clk"; #clock-cells = <1>; clocks = <&apb0>; @@ -206,14 +206,14 @@ examples: "apb0_i2c"; }; - ir_clk: ir_clk { + ir_clk: ir-clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; clocks = <&rtc 0>, <&osc24M>; clock-output-names = "ir"; }; - apb0_rst: apb0_rst { + apb0_rst: apb0-rst { compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml index 1689b986f441..86ee69c0f45b 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml @@ -47,10 +47,18 @@ patternProperties: type: object '^pinctrl(@[0-9a-f]+)?$': - oneOf: - - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml - - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml - - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml + type: object + additionalProperties: true + properties: + compatible: + contains: + enum: + - aspeed,ast2400-pinctrl + - aspeed,ast2500-pinctrl + - aspeed,ast2600-pinctrl + + required: + - compatible '^interrupt-controller@[0-9a-f]+$': description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml index b85819fbb07c..04910e4f88b2 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml @@ -34,19 +34,19 @@ properties: patternProperties: '^clock-controller@[a-f0-9]+$': - $ref: ../clock/brcm,iproc-clocks.yaml + $ref: /schemas/clock/brcm,iproc-clocks.yaml '^phy@[a-f0-9]+$': - $ref: ../phy/bcm-ns-usb2-phy.yaml + $ref: /schemas/phy/bcm-ns-usb2-phy.yaml '^pinctrl@[a-f0-9]+$': - $ref: ../pinctrl/brcm,ns-pinmux.yaml + $ref: /schemas/pinctrl/brcm,ns-pinmux.yaml '^syscon@[a-f0-9]+$': $ref: syscon.yaml '^thermal@[a-f0-9]+$': - $ref: ../thermal/brcm,ns-thermal.yaml + $ref: /schemas/thermal/brcm,ns-thermal.yaml additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt deleted file mode 100644 index 82f82e069563..000000000000 --- a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt +++ /dev/null @@ -1,16 +0,0 @@ -Broadcom iProc Chip Device Resource Unit (CDRU) - -Various Broadcom iProc SoCs have a set of registers that provide various -chip specific device and resource configurations. This node allows access to -these CDRU registers via syscon. - -Required properties: -- compatible: should contain: - "brcm,sr-cdru", "syscon" for Stingray -- reg: base address and range of the CDRU registers - -Example: - cdru: syscon@6641d000 { - compatible = "brcm,sr-cdru", "syscon"; - reg = <0 0x6641d000 0 0x400>; - }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt deleted file mode 100644 index 4421e9771b8a..000000000000 --- a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt +++ /dev/null @@ -1,18 +0,0 @@ -Broadcom iProc Multi Host Bridge (MHB) - -Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls -the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint -interface; 3) access to the Nitro (network processing) engine - -This node allows access to these MHB registers via syscon. - -Required properties: -- compatible: should contain: - "brcm,sr-mhb", "syscon" for Stingray -- reg: base address and range of the MHB registers - -Example: - mhb: syscon@60401000 { - compatible = "brcm,sr-mhb", "syscon"; - reg = <0 0x60401000 0 0x38c>; - }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml index cff7d772a7db..abe24526f3d7 100644 --- a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml +++ b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml @@ -33,7 +33,7 @@ properties: patternProperties: '^reset-controller@[a-f0-9]+$': - $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml + $ref: /schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml index 3b3beab9db3f..2451d0f0e4e3 100644 --- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml +++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml @@ -36,7 +36,7 @@ properties: clock-controller: # Child node type: object - $ref: ../clock/canaan,k210-clk.yaml + $ref: /schemas/clock/canaan,k210-clk.yaml description: Clock controller for the SoC clocks. This child node definition should follow the bindings specified in @@ -45,7 +45,7 @@ properties: reset-controller: # Child node type: object - $ref: ../reset/canaan,k210-rst.yaml + $ref: /schemas/reset/canaan,k210-rst.yaml description: Reset controller for the SoC. This child node definition should follow the bindings specified in @@ -54,7 +54,7 @@ properties: syscon-reboot: # Child node type: object - $ref: ../power/reset/syscon-reboot.yaml + $ref: /schemas/power/reset/syscon-reboot.yaml description: Reboot method for the SoC. This child node definition should follow the bindings specified in diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml index f6967c1f6235..d3b79140cce2 100644 --- a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml +++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml @@ -42,10 +42,10 @@ required: patternProperties: "^gpio(@[0-9a-f]+)?$": - $ref: ../gpio/delta,tn48m-gpio.yaml + $ref: /schemas/gpio/delta,tn48m-gpio.yaml "^reset-controller?$": - $ref: ../reset/delta,tn48m-reset.yaml + $ref: /schemas/reset/delta,tn48m-reset.yaml additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml index f438c2374966..e79ce447a800 100644 --- a/Documentation/devicetree/bindings/mfd/iqs62x.yaml +++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml @@ -38,10 +38,10 @@ properties: device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A). keys: - $ref: ../input/iqs62x-keys.yaml + $ref: /schemas/input/iqs62x-keys.yaml pwm: - $ref: ../pwm/iqs620a-pwm.yaml + $ref: /schemas/pwm/iqs620a-pwm.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml index eb3b43547cb6..37207a97e06c 100644 --- a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml +++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml @@ -39,19 +39,19 @@ properties: patternProperties: "^gpio(@[0-9a-f]+)?$": - $ref: ../gpio/kontron,sl28cpld-gpio.yaml + $ref: /schemas/gpio/kontron,sl28cpld-gpio.yaml "^hwmon(@[0-9a-f]+)?$": - $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml + $ref: /schemas/hwmon/kontron,sl28cpld-hwmon.yaml "^interrupt-controller(@[0-9a-f]+)?$": - $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml + $ref: /schemas/interrupt-controller/kontron,sl28cpld-intc.yaml "^pwm(@[0-9a-f]+)?$": - $ref: ../pwm/kontron,sl28cpld-pwm.yaml + $ref: /schemas/pwm/kontron,sl28cpld-pwm.yaml "^watchdog(@[0-9a-f]+)?$": - $ref: ../watchdog/kontron,sl28cpld-wdt.yaml + $ref: /schemas/watchdog/kontron,sl28cpld-wdt.yaml required: - "#address-cells" diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt deleted file mode 100644 index ae9cf39bd101..000000000000 --- a/Documentation/devicetree/bindings/mfd/lp873x.txt +++ /dev/null @@ -1,67 +0,0 @@ -TI LP873X PMIC MFD driver - -Required properties: - - compatible: "ti,lp8732", "ti,lp8733" - - reg: I2C slave address. - - gpio-controller: Marks the device node as a GPIO Controller. - - #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - xxx-in-supply: Phandle to parent supply node of each regulator - populated under regulators node. xxx can be - buck0, buck1, ldo0 or ldo1. - - regulators: List of child nodes that specify the regulator - initialization data. -Example: - -pmic: lp8733@60 { - compatible = "ti,lp8733"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - - buck0-in-supply = <&vsys_3v3>; - buck1-in-supply = <&vsys_3v3>; - ldo0-in-supply = <&vsys_3v3>; - ldo1-in-supply = <&vsys_3v3>; - - regulators { - lp8733_buck0: buck0 { - regulator-name = "lp8733-buck0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-min-microamp = <1500000>; - regulator-max-microamp = <4000000>; - regulator-ramp-delay = <10000>; - regulator-always-on; - regulator-boot-on; - }; - - lp8733_buck1: buck1 { - regulator-name = "lp8733-buck1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-min-microamp = <1500000>; - regulator-max-microamp = <4000000>; - regulator-ramp-delay = <10000>; - regulator-boot-on; - regulator-always-on; - }; - - lp8733_ldo0: ldo0 { - regulator-name = "lp8733-ldo0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - lp8733_ldo1: ldo1 { - regulator-name = "lp8733-ldo1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml index 4181174fcf58..d93d84171a31 100644 --- a/Documentation/devicetree/bindings/mfd/max77650.yaml +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml @@ -53,16 +53,16 @@ properties: Single string containing the name of the GPIO line. regulators: - $ref: ../regulator/max77650-regulator.yaml + $ref: /schemas/regulator/max77650-regulator.yaml charger: - $ref: ../power/supply/max77650-charger.yaml + $ref: /schemas/power/supply/max77650-charger.yaml leds: - $ref: ../leds/leds-max77650.yaml + $ref: /schemas/leds/leds-max77650.yaml onkey: - $ref: ../input/max77650-onkey.yaml + $ref: /schemas/input/max77650-onkey.yaml required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml index d027aabe453b..c13d51e462ba 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml @@ -35,7 +35,7 @@ properties: maxItems: 1 voltage-regulators: - $ref: ../regulator/maxim,max77686.yaml + $ref: /schemas/regulator/maxim,max77686.yaml description: List of child nodes that specify the regulators. diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml index 6a6f222b868f..cce273ba4034 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -81,7 +81,7 @@ properties: - pwms regulators: - $ref: ../regulator/maxim,max77693.yaml + $ref: /schemas/regulator/maxim,max77693.yaml description: List of child nodes that specify the regulators. diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 8103fb61a16c..b7f01cbb8fff 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -160,6 +160,10 @@ patternProperties: type: object $ref: /schemas/nvmem/qcom,spmi-sdam.yaml# + "^pbs@[0-9a-f]+$": + type: object + $ref: /schemas/soc/qcom/qcom,pbs.yaml# + "phy@[0-9a-f]+$": type: object $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml# diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml index b97d77015335..c6bd14ec5aa0 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml @@ -28,6 +28,7 @@ properties: - qcom,sdm845-tcsr - qcom,sdx55-tcsr - qcom,sdx65-tcsr + - qcom,sdx75-tcsr - qcom,sm4450-tcsr - qcom,sm6115-tcsr - qcom,sm8150-tcsr diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml index 7fe3875a5996..63e18d6a9c21 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml @@ -19,6 +19,7 @@ properties: - enum: - qcom,pm8058 - qcom,pm8821 + - qcom,pm8901 - qcom,pm8921 - items: - enum: diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml index 4762eb1439ce..e3ccba177b21 100644 --- a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml +++ b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml @@ -37,10 +37,10 @@ properties: maxItems: 1 regulators: |