ARM: sa1100: remove unused board files

The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and
Simpad machines were all marked as unused as there are no known users
left. Remove all of these, along with references to them in defconfig
files and drivers.

Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600
and Jornada 720, each of which had one person still using them, with
Collie also being supported in Qemu.

Cc: Peter Chubb <peter.chubb@unsw.edu.au>
Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 184 deletions

diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
deleted file mode 100644
index 3085f1c2e586..000000000000
--- a/arch/arm/mach-sa1100/hackkit.c
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/hackkit.c
- *
- * Copyright (C) 2002 Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
- *
- * This file contains all HackKit tweaks. Based on original work from
- * Nicolas Pitre's assabet fixes
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/serial_core.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/tty.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/pgtable.h>
-
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/**********************************************************************
- *  prototypes
- */
-
-/* init funcs */
-static void __init hackkit_map_io(void);
-
-static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
-
-/**********************************************************************
- *  global data
- */
-
-/**********************************************************************
- *  static data
- */
-
-static struct map_desc hackkit_io_desc[] __initdata = {
-	{	/* Flash bank 0 */
-		.virtual	=  0xe8000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	},
-};
-
-static struct sa1100_port_fns hackkit_port_fns __initdata = {
-	.pm		= hackkit_uart_pm,
-};
-
-/**********************************************************************
- *  Static functions
- */
-
-static void __init hackkit_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(hackkit_io_desc, ARRAY_SIZE(hackkit_io_desc));
-
-	sa1100_register_uart_fns(&hackkit_port_fns);
-	sa1100_register_uart(0, 1);	/* com port */
-	sa1100_register_uart(1, 2);
-	sa1100_register_uart(2, 3);	/* radio module */
-
-	Ser1SDCR0 |= SDCR0_SUS;
-}
-
-/**
- *	hackkit_uart_pm - powermgmt callback function for system 3 UART
- *	@port: uart port structure
- *	@state: pm state
- *	@oldstate: old pm state
- *
- */
-static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	/* TODO: switch on/off uart in powersave mode */
-}
-
-static struct mtd_partition hackkit_partitions[] = {
-	{
-		.name		= "BLOB",
-		.size		= 0x00040000,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "config",
-		.size		= 0x00040000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "kernel",
-		.size		= 0x00100000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "initrd",
-		.size		= 0x00180000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "rootfs",
-		.size		= 0x700000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "data",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data hackkit_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= hackkit_partitions,
-	.nr_parts	= ARRAY_SIZE(hackkit_partitions),
-};
-
-static struct resource hackkit_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
-
-/* LEDs */
-struct gpio_led hackkit_gpio_leds[] = {
-	{
-		.name			= "hackkit:red",
-		.default_trigger	= "cpu0",
-		.gpio			= 22,
-	},
-	{
-		.name			= "hackkit:green",
-		.default_trigger	= "heartbeat",
-		.gpio			= 23,
-	},
-};
-
-static struct gpio_led_platform_data hackkit_gpio_led_info = {
-	.leds		= hackkit_gpio_leds,
-	.num_leds	= ARRAY_SIZE(hackkit_gpio_leds),
-};
-
-static struct platform_device hackkit_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &hackkit_gpio_led_info,
-	}
-};
-
-static void __init hackkit_init(void)
-{
-	sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
-	platform_device_register(&hackkit_leds);
-}
-
-/**********************************************************************
- *  Exported Functions
- */
-
-MACHINE_START(HACKKIT, "HackKit Cpu Board")
-	.atag_offset	= 0x100,
-	.map_io		= hackkit_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= hackkit_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END