Merge branch 'clk-unused' into clk-next

 - Remove efm32 clk driver
 - Remove tango4 clk driver
 - Remove zte zx clk driver
 - Remove sirf prima2/atlast clk drivers
 - Remove u300 clk driver

* clk-unused:
  clk: remove u300 driver
  clk: remove sirf prima2/atlas drivers
  clk: remove zte zx driver
  clk: remove tango4 driver
  clk: Drop unused efm32gg driver

16 files changed, 0 insertions, 6894 deletions

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 074e2233f445..5325847469e9 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
 obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
-obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_ARCH_SPARX5)		+= clk-sparx5.o
 obj-$(CONFIG_COMMON_CLK_FIXED_MMIO)	+= clk-fixed-mmio.o
 obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI)	+= clk-fsl-flexspi.o
@@ -63,9 +62,7 @@ obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
 obj-$(CONFIG_COMMON_CLK_STM32F)		+= clk-stm32f4.o
 obj-$(CONFIG_COMMON_CLK_STM32H7)	+= clk-stm32h7.o
 obj-$(CONFIG_COMMON_CLK_STM32MP157)	+= clk-stm32mp1.o
-obj-$(CONFIG_ARCH_TANGO)		+= clk-tango4.o
 obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
-obj-$(CONFIG_ARCH_U300)			+= clk-u300.o
 obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o
 obj-$(CONFIG_COMMON_CLK_VC5)		+= clk-versaclock5.o
 obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o
@@ -105,7 +102,6 @@ obj-y					+= renesas/
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
 obj-$(CONFIG_CLK_SIFIVE)		+= sifive/
-obj-$(CONFIG_ARCH_SIRF)			+= sirf/
 obj-$(CONFIG_ARCH_SOCFPGA)		+= socfpga/
 obj-$(CONFIG_ARCH_AGILEX)		+= socfpga/
 obj-$(CONFIG_ARCH_STRATIX10)		+= socfpga/
@@ -123,6 +119,5 @@ ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_X86)			+= x86/
 endif
 obj-y					+= xilinx/
-obj-$(CONFIG_ARCH_ZX)			+= zte/
 obj-$(CONFIG_ARCH_ZYNQ)			+= zynq/
 obj-$(CONFIG_COMMON_CLK_ZYNQMP)         += zynqmp/
diff --git a/drivers/clk/clk-efm32gg.c b/drivers/clk/clk-efm32gg.c
deleted file mode 100644
index 85beaacb4088..000000000000
--- a/drivers/clk/clk-efm32gg.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- */
-#include <linux/io.h>
-#include <linux/clk-provider.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/slab.h>
-
-#include <dt-bindings/clock/efm32-cmu.h>
-
-#define CMU_HFPERCLKEN0		0x44
-#define CMU_MAX_CLKS		37
-
-static struct clk_hw_onecell_data *clk_data;
-
-static void __init efm32gg_cmu_init(struct device_node *np)
-{
-	int i;
-	void __iomem *base;
-	struct clk_hw **hws;
-
-	clk_data = kzalloc(struct_size(clk_data, hws, CMU_MAX_CLKS),
-			   GFP_KERNEL);
-
-	if (!clk_data)
-		return;
-
-	hws = clk_data->hws;
-
-	for (i = 0; i < CMU_MAX_CLKS; ++i)
-		hws[i] = ERR_PTR(-ENOENT);
-
-	base = of_iomap(np, 0);
-	if (!base) {
-		pr_warn("Failed to map address range for efm32gg,cmu node\n");
-		return;
-	}
-
-	hws[clk_HFXO] = clk_hw_register_fixed_rate(NULL, "HFXO", NULL, 0,
-						   48000000);
-
-	hws[clk_HFPERCLKUSART0] = clk_hw_register_gate(NULL, "HFPERCLK.USART0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 0, 0, NULL);
-	hws[clk_HFPERCLKUSART1] = clk_hw_register_gate(NULL, "HFPERCLK.USART1",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 1, 0, NULL);
-	hws[clk_HFPERCLKUSART2] = clk_hw_register_gate(NULL, "HFPERCLK.USART2",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 2, 0, NULL);
-	hws[clk_HFPERCLKUART0] = clk_hw_register_gate(NULL, "HFPERCLK.UART0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 3, 0, NULL);
-	hws[clk_HFPERCLKUART1] = clk_hw_register_gate(NULL, "HFPERCLK.UART1",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 4, 0, NULL);
-	hws[clk_HFPERCLKTIMER0] = clk_hw_register_gate(NULL, "HFPERCLK.TIMER0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 5, 0, NULL);
-	hws[clk_HFPERCLKTIMER1] = clk_hw_register_gate(NULL, "HFPERCLK.TIMER1",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 6, 0, NULL);
-	hws[clk_HFPERCLKTIMER2] = clk_hw_register_gate(NULL, "HFPERCLK.TIMER2",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 7, 0, NULL);
-	hws[clk_HFPERCLKTIMER3] = clk_hw_register_gate(NULL, "HFPERCLK.TIMER3",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 8, 0, NULL);
-	hws[clk_HFPERCLKACMP0] = clk_hw_register_gate(NULL, "HFPERCLK.ACMP0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 9, 0, NULL);
-	hws[clk_HFPERCLKACMP1] = clk_hw_register_gate(NULL, "HFPERCLK.ACMP1",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 10, 0, NULL);
-	hws[clk_HFPERCLKI2C0] = clk_hw_register_gate(NULL, "HFPERCLK.I2C0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 11, 0, NULL);
-	hws[clk_HFPERCLKI2C1] = clk_hw_register_gate(NULL, "HFPERCLK.I2C1",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 12, 0, NULL);
-	hws[clk_HFPERCLKGPIO] = clk_hw_register_gate(NULL, "HFPERCLK.GPIO",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 13, 0, NULL);
-	hws[clk_HFPERCLKVCMP] = clk_hw_register_gate(NULL, "HFPERCLK.VCMP",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 14, 0, NULL);
-	hws[clk_HFPERCLKPRS] = clk_hw_register_gate(NULL, "HFPERCLK.PRS",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 15, 0, NULL);
-	hws[clk_HFPERCLKADC0] = clk_hw_register_gate(NULL, "HFPERCLK.ADC0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 16, 0, NULL);
-	hws[clk_HFPERCLKDAC0] = clk_hw_register_gate(NULL, "HFPERCLK.DAC0",
-			"HFXO", 0, base + CMU_HFPERCLKEN0, 17, 0, NULL);
-
-	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
-}
-CLK_OF_DECLARE(efm32ggcmu, "efm32gg,cmu", efm32gg_cmu_init);
diff --git a/drivers/clk/clk-tango4.c b/drivers/clk/clk-tango4.c
deleted file mode 100644
index fe12a43f7a40..000000000000
--- a/drivers/clk/clk-tango4.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/clk-provider.h>
-#include <linux/of_address.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define CLK_COUNT 4 /* cpu_clk, sys_clk, usb_clk, sdio_clk */
-static struct clk *clks[CLK_COUNT];
-static struct clk_onecell_data clk_data = { clks, CLK_COUNT };
-
-#define SYSCLK_DIV	0x20
-#define CPUCLK_DIV	0x24
-#define DIV_BYPASS	BIT(23)
-
-/*** CLKGEN_PLL ***/
-#define extract_pll_n(val)	((val >>  0) & ((1u << 7) - 1))
-#define extract_pll_k(val)	((val >> 13) & ((1u << 3) - 1))
-#define extract_pll_m(val)	((val >> 16) & ((1u << 3) - 1))
-#define extract_pll_isel(val)	((val >> 24) & ((1u << 3) - 1))
-
-static void __init make_pll(int idx, const char *parent, void __iomem *base)
-{
-	char name[8];
-	u32 val, mul, div;
-
-	sprintf(name, "pll%d", idx);
-	val = readl(base + idx * 8);
-	mul =  extract_pll_n(val) + 1;
-	div = (extract_pll_m(val) + 1) << extract_pll_k(val);
-	clk_register_fixed_factor(NULL, name, parent, 0, mul, div);
-	if (extract_pll_isel(val) != 1)
-		panic("%s: input not set to XTAL_IN\n", name);
-}
-
-static void __init make_cd(int idx, void __iomem *base)
-{
-	char name[8];
-	u32 val, mul, div;
-
-	sprintf(name, "cd%d", idx);
-	val = readl(base + idx * 8);
-	mul =  1 << 27;
-	div = (2 << 27) + val;
-	clk_register_fixed_factor(NULL, name, "pll2", 0, mul, div);
-	if (val > 0xf0000000)
-		panic("%s: unsupported divider %x\n", name, val);
-}
-
-static void __init tango4_clkgen_setup(struct device_node *np)
-{
-	struct clk **pp = clk_data.clks;
-	void __iomem *base = of_iomap(np, 0);
-	const char *parent = of_clk_get_parent_name(np, 0);
-
-	if (!base)
-		panic("%pOFn: invalid address\n", np);
-
-	if (readl(base + CPUCLK_DIV) & DIV_BYPASS)
-		panic("%pOFn: unsupported cpuclk setup\n", np);
-
-	if (readl(base + SYSCLK_DIV) & DIV_BYPASS)
-		panic("%pOFn: unsupported sysclk setup\n", np);
-
-	writel(0x100, base + CPUCLK_DIV); /* disable frequency ramping */
-
-	make_pll(0, parent, base);
-	make_pll(1, parent, base);
-	make_pll(2, parent, base);
-	make_cd(2, base + 0x80);
-	make_cd(6, base + 0x80);
-
-	pp[0] = clk_register_divider(NULL, "cpu_clk", "pll0", 0,
-			base + CPUCLK_DIV, 8, 8, CLK_DIVIDER_ONE_BASED, NULL);
-	pp[1] = clk_register_fixed_factor(NULL, "sys_clk", "pll1", 0, 1, 4);
-	pp[2] = clk_register_fixed_factor(NULL,  "usb_clk", "cd2", 0, 1, 2);
-	pp[3] = clk_register_fixed_factor(NULL, "sdio_clk", "cd6", 0, 1, 2);
-
-	if (IS_ERR(pp[0]) || IS_ERR(pp[1]) || IS_ERR(pp[2]) || IS_ERR(pp[3]))
-		panic("%pOFn: clk registration failed\n", np);
-
-	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data))
-		panic("%pOFn: clk provider registration failed\n", np);
-}
-CLK_OF_DECLARE(tango4_clkgen, "sigma,tango4-clkgen", tango4_clkgen_setup);
diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
deleted file mode 100644
index e228c07c4c6e..000000000000
--- a/drivers/clk/clk-u300.c
+++ /dev/null
@@ -1,1199 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * U300 clock implementation
- * Copyright (C) 2007-2012 ST-Ericsson AB
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-#include <linux/clkdev.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk-provider.h>
-#include <linux/spinlock.h>
-#include <linux/of.h>
-#include <linux/platform_data/clk-u300.h>
-
-/* APP side SYSCON registers */
-/* CLK Control Register 16bit (R/W) */
-#define U300_SYSCON_CCR						(0x0000)
-#define U300_SYSCON_CCR_I2S1_USE_VCXO				(0x0040)
-#define U300_SYSCON_CCR_I2S0_USE_VCXO				(0x0020)
-#define U300_SYSCON_CCR_TURN_VCXO_ON				(0x0008)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK			(0x0007)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER		(0x04)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW			(0x03)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE		(0x02)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH			(0x01)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST			(0x00)
-/* CLK Status Register 16bit (R/W) */
-#define U300_SYSCON_CSR						(0x0004)
-#define U300_SYSCON_CSR_PLL208_LOCK_IND				(0x0002)
-#define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
-/* Reset lines for SLOW devices 16bit (R/W) */
-#define U300_SYSCON_RSR						(0x0014)
-#define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
-#define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
-#define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
-#define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
-#define U300_SYSCON_RSR_KEYPAD_RESET_EN				(0x0020)
-#define U300_SYSCON_RSR_GPIO_RESET_EN				(0x0010)
-#define U300_SYSCON_RSR_EH_RESET_EN				(0x0008)
-#define U300_SYSCON_RSR_BTR_RESET_EN				(0x0004)
-#define U300_SYSCON_RSR_UART_RESET_EN				(0x0002)
-#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
-/* Reset lines for FAST devices 16bit (R/W) */
-#define U300_SYSCON_RFR						(0x0018)
-#define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
-#define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
-#define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
-#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
-#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE			(0x0008)
-#define U300_SYSCON_RFR_I2C1_RESET_ENABLE			(0x0004)
-#define U300_SYSCON_RFR_I2C0_RESET_ENABLE			(0x0002)
-#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
-/* Reset lines for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_RRR						(0x001c)
-#define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
-#define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
-#define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
-#define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
-#define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
-#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN			(0x0080)
-#define U300_SYSCON_RRR_NANDIF_RESET_EN				(0x0040)
-#define U300_SYSCON_RRR_EMIF_RESET_EN				(0x0020)
-#define U300_SYSCON_RRR_DMAC_RESET_EN				(0x0010)
-#define U300_SYSCON_RRR_CPU_RESET_EN				(0x0008)
-#define U300_SYSCON_RRR_APEX_RESET_EN				(0x0004)
-#define U300_SYSCON_RRR_AHB_RESET_EN				(0x0002)
-#define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
-/* Clock enable for SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CESR					(0x0020)
-#define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
-#define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
-#define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
-#define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
-#define U300_SYSCON_CESR_GPIO_CLK_EN				(0x0010)
-#define U300_SYSCON_CESR_EH_CLK_EN				(0x0008)
-#define U300_SYSCON_CESR_BTR_CLK_EN				(0x0004)
-#define U300_SYSCON_CESR_UART_CLK_EN				(0x0002)
-#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
-/* Clock enable for FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CEFR					(0x0024)
-#define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
-#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
-#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
-#define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
-#define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
-#define U300_SYSCON_CEFR_I2S1_CLK_EN				(0x0010)
-#define U300_SYSCON_CEFR_I2S0_CLK_EN				(0x0008)
-#define U300_SYSCON_CEFR_I2C1_CLK_EN				(0x0004)
-#define U300_SYSCON_CEFR_I2C0_CLK_EN				(0x0002)
-#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
-/* Clock enable for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CERR					(0x0028)
-#define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
-#define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
-#define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
-#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
-#define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
-#define U300_SYSCON_CERR_XGAM_CLK_EN				(0x0100)
-#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN			(0x0080)
-#define U300_SYSCON_CERR_NANDIF_CLK_EN				(0x0040)
-#define U300_SYSCON_CERR_EMIF_CLK_EN				(0x0020)
-#define U300_SYSCON_CERR_DMAC_CLK_EN				(0x0010)
-#define U300_SYSCON_CERR_CPU_CLK_EN				(0x0008)
-#define U300_SYSCON_CERR_APEX_CLK_EN				(0x0004)
-#define U300_SYSCON_CERR_AHB_CLK_EN				(0x0002)
-#define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
-/* Single block clock enable 16bit (-/W) */
-#define U300_SYSCON_SBCER					(0x002c)
-#define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
-#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
-#define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
-#define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
-#define U300_SYSCON_SBCER_GPIO_CLK_EN				(0x0004)
-#define U300_SYSCON_SBCER_EH_CLK_EN				(0x0003)
-#define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
-#define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
-#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
-#define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
-#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
-#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
-#define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
-#define U300_SYSCON_SBCER_MMC_CLK_EN				(0x0015)
-#define U300_SYSCON_SBCER_I2S1_CLK_EN				(0x0014)
-#define U300_SYSCON_SBCER_I2S0_CLK_EN				(0x0013)
-#define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
-#define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
-#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
-#define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
-#define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
-#define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
-#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
-#define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
-#define U300_SYSCON_SBCER_XGAM_CLK_EN				(0x0028)
-#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN			(0x0027)
-#define U300_SYSCON_SBCER_NANDIF_CLK_EN				(0x0026)
-#define U300_SYSCON_SBCER_EMIF_CLK_EN				(0x0025)
-#define U300_SYSCON_SBCER_DMAC_CLK_EN				(0x0024)
-#define U300_SYSCON_SBCER_CPU_CLK_EN				(0x0023)
-#define U300_SYSCON_SBCER_APEX_CLK_EN				(0x0022)
-#define U300_SYSCON_SBCER_AHB_CLK_EN				(0x0021)
-#define U300_SYSCON_SBCER_AAIF_CLK_EN				(0x0020)
-/* Single block clock disable 16bit (-/W) */
-#define U300_SYSCON_SBCDR					(0x0030)
-/* Same values as above for SBCER */
-/* Clock force SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CFSR					(0x003c)
-#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
-#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
-#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
-#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
-#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN			(0x0010)
-#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN			(0x0008)
-#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN			(0x0004)
-#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN			(0x0002)
-#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN		(0x0001)
-/* Clock force FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CFFR					(0x40)
-/* Values not defined. Define if you want to use them. */
-/* Clock force the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CFRR					(0x44)
-#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
-#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
-#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
-#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
-#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
-#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN			(0x0100)
-#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN			(0x0080)
-#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN			(0x0040)
-#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN			(0x0020)
-#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN			(0x0010)
-#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN			(0x0008)
-#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN			(0x0004)
-#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN			(0x0002)
-#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN			(0x0001)
-/* PLL208 Frequency Control 16bit (R/W) */
-#define U300_SYSCON_PFCR					(0x48)
-#define U300_SYSCON_PFCR_DPLL_MULT_NUM				(0x000F)
-/* Power Management Control 16bit (R/W) */
-#define U300_SYSCON_PMCR					(0x50)
-#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
-#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
-/* Reset Out 16bit (R/W) */
-#define U300_SYSCON_RCR						(0x6c)
-#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE			(0x0001)
-/* EMIF Slew Rate Control 16bit (R/W) */
-#define U300_SYSCON_SRCLR					(0x70)
-#define U300_SYSCON_SRCLR_MASK					(0x03FF)
-#define U300_SYSCON_SRCLR_VALUE					(0x03FF)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B			(0x0200)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A			(0x0100)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B			(0x0080)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A			(0x0040)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B			(0x0020)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A			(0x0010)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B			(0x0008)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A			(0x0004)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B			(0x0002)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A			(0x0001)
-/* EMIF Clock Control Register 16bit (R/W) */
-#define U300_SYSCON_ECCR					(0x0078)
-#define U300_SYSCON_ECCR_MASK					(0x000F)
-#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE		(0x0008)
-#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE	(0x0004)
-#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE		(0x0002)
-#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE		(0x0001)
-/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
-#define U300_SYSCON_MMF0R					(0x90)
-#define U300_SYSCON_MMF0R_MASK					(0x00FF)
-#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK			(0x00F0)
-#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK			(0x000F)
-/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
-#define U300_SYSCON_MMF1R					(0x94)
-#define U300_SYSCON_MMF1R_MASK					(0x00FF)
-#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK			(0x00F0)
-#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK			(0x000F)
-/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
-#define U300_SYSCON_MMCR					(0x9C)
-#define U300_SYSCON_MMCR_MASK					(0x0003)
-#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
-#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
-/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
-#define U300_SYSCON_S0CCR					(0x120)
-#define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
-#define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
-#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR			(0x2000)
-#define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
-#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
-#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
-#define U300_SYSCON_S0CCR_CLOCK_ENABLE				(0x0001)
-#define U300_SYSCON_S0CCR_SEL_MCLK				(0x8 << 1)
-#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK			(0xA << 1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK			(0xC << 1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK			(0xD << 1)
-#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK			(0xE << 1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK			(0x0 << 1)
-#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK			(0x2 << 1)
-#define U300_SYSCON_S0CCR_SEL_RTC_CLK				(0x4 << 1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK			(0x6 << 1)
-/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
-#define U300_SYSCON_S1CCR					(0x124)
-#define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
-#define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
-#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR			(0x2000)
-#define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
-#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
-#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
-#define U300_SYSCON_S1CCR_CLOCK_ENABLE				(0x0001)
-#define U300_SYSCON_S1CCR_SEL_MCLK				(0x8 << 1)
-#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK			(0xA << 1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK			(0xC << 1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK			(0xD << 1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK			(0xE << 1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK			(0x0 << 1)
-#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK			(0x2 << 1)
-#define U300_SYSCON_S1CCR_SEL_RTC_CLK				(0x4 << 1)
-#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK			(0x6 << 1)
-/* SYS_2_CLK_CONTROL third clock control 16 bit (R/W) */
-#define U300_SYSCON_S2CCR					(0x128)
-#define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
-#define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR			(0x2000)
-#define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
-#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
-#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
-#define U300_SYSCON_S2CCR_CLOCK_ENABLE				(0x0001)
-#define U300_SYSCON_S2CCR_SEL_MCLK				(0x8 << 1)
-#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK			(0xA << 1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK			(0xC << 1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK			(0xD << 1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK			(0xE << 1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK			(0x0 << 1)
-#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK			(0x2 << 1)
-#define U300_SYSCON_S2CCR_SEL_RTC_CLK				(0x4 << 1)
-#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK			(0x6 << 1)
-/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
-#define U300_SYSCON_PICR					(0x0130)
-#define U300_SYSCON_PICR_MASK					(0x00FF)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE		(0x0080)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE		(0x0040)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE		(0x0020)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE		(0x0010)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE		(0x0008)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE		(0x0004)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE		(0x0002)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE		(0x0001)
-/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
-#define U300_SYSCON_PISR					(0x0134)
-#define U300_SYSCON_PISR_MASK					(0x000F)
-#define U300_SYSCON_PISR_PLL13_UNLOCK_IND			(0x0008)
-#define U300_SYSCON_PISR_PLL13_LOCK_IND				(0x0004)
-#define U300_SYSCON_PISR_PLL208_UNLOCK_IND			(0x0002)
-#define U300_SYSCON_PISR_PLL208_LOCK_IND			(0x0001)
-/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
-#define U300_SYSCON_PICLR					(0x0138)
-#define U300_SYSCON_PICLR_MASK					(0x000F)
-#define U300_SYSCON_PICLR_RWMASK				(0x0000)
-#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC			(0x0008)
-#define U300_SYSCON_PICLR_PLL13_LOCK_SC				(0x0004)
-#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC			(0x0002)
-#define U300_SYSCON_PICLR_PLL208_LOCK_SC			(0x0001)
-/* Clock activity observability register 0 */
-#define U300_SYSCON_C0OAR					(0x140)
-#define U300_SYSCON_C0OAR_MASK					(0xFFFF)
-#define U300_SYSCON_C0OAR_VALUE					(0xFFFF)
-#define U300_SYSCON_C0OAR_BT_H_CLK				(0x8000)
-#define U300_SYSCON_C0OAR_ASPB_P_CLK				(0x4000)
-#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK			(0x2000)
-#define U300_SYSCON_C0OAR_APP_SEMI_CLK				(0x1000)
-#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK			(0x0800)
-#define U300_SYSCON_C0OAR_APP_I2S1_CLK				(0x0400)
-#define U300_SYSCON_C0OAR_APP_I2S0_CLK				(0x0200)
-#define U300_SYSCON_C0OAR_APP_CPU_CLK				(0x0100)
-#define U300_SYSCON_C0OAR_APP_52_CLK				(0x0080)
-#define U300_SYSCON_C0OAR_APP_208_CLK				(0x0040)
-#define U300_SYSCON_C0OAR_APP_104_CLK				(0x0020)
-#define U300_SYSCON_C0OAR_APEX_CLK				(0x0010)
-#define U300_SYSCON_C0OAR_AHPB_M_H_CLK				(0x0008)
-#define U300_SYSCON_C0OAR_AHB_CLK				(0x0004)
-#define U300_SYSCON_C0OAR_AFPB_P_CLK				(0x0002)
-#define U300_SYSCON_C0OAR_AAIF_CLK				(0x0001)
-/* Clock activity observability register 1 */
-#define U300_SYSCON_C1OAR					(0x144)
-#define U300_SYSCON_C1OAR_MASK					(0x3FFE)
-#define U300_SYSCON_C1OAR_VALUE					(0x3FFE)
-#define U300_SYSCON_C1OAR_NFIF_F_CLK				(0x2000)
-#define U300_SYSCON_C1OAR_MSPRO_CLK				(0x1000)
-#define U300_SYSCON_C1OAR_MMC_P_CLK				(0x0800)
-#define U300_SYSCON_C1OAR_MMC_CLK				(0x0400)
-#define U300_SYSCON_C1OAR_KP_P_CLK				(0x0200)
-#define U300_SYSCON_C1OAR_I2C1_P_CLK				(0x0100)
-#define U300_SYSCON_C1OAR_I2C0_P_CLK				(0x0080)
-#define U300_SYSCON_C1OAR_GPIO_CLK				(0x0040)
-#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK				(0x0020)
-#define U300_SYSCON_C1OAR_EMIF_H_CLK				(0x0010)
-#define U300_SYSCON_C1OAR_EVHIST_CLK				(0x0008)
-#define U300_SYSCON_C1OAR_PPM_CLK				(0x0004)
-#define U300_SYSCON_C1OAR_DMA_CLK				(0x0002)
-/* Clock activity observability register 2 */
-#define U300_SYSCON_C2OAR					(0x148)
-#define U300_SYSCON_C2OAR_MASK					(0x0FFF)
-#define U300_SYSCON_C2OAR_VALUE					(0x0FFF)
-#define U300_SYSCON_C2OAR_XGAM_CDI_CLK				(0x0800)
-#define U300_SYSCON_C2OAR_XGAM_CLK				(0x0400)
-#define U300_SYSCON_C2OAR_VC_H_CLK				(0x0200)
-#define U300_SYSCON_C2OAR_VC_CLK				(0x0100)
-#define U300_SYSCON_C2OAR_UA_P_CLK				(0x0080)
-#define U300_SYSCON_C2OAR_TMR1_CLK				(0x0040)
-#define U300_SYSCON_C2OAR_TMR0_CLK				(0x0020)
-#define U300_SYSCON_C2OAR_SPI_P_CLK				(0x0010)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK			(0x0008)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CLK				(0x0004)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK			(0x0002)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CLK				(0x0001)
-
-
-/*
- * The clocking hierarchy currently looks like this.
- * NOTE: the idea is NOT to show how the clocks are routed on the chip!
- * The ideas is to show dependencies, so a clock higher up in the
- * hierarchy has to be on in order for another clock to be on. Now,
- * both CPU and DMA can actually be on top of the hierarchy, and that
- * is not modeled currently. Instead we have the backbone AMBA bus on
- * top. This bus cannot be programmed in any way but conceptually it
- * needs to be active for the bridges and devices to transport data.
- *
- * Please be aware that a few clocks are hw controlled, which mean that
- * the hw itself can turn on/off or change the rate of the clock when
- * needed!
- *
- *  AMBA bus
- *  |
- *  +- CPU
- *  +- FSMC NANDIF NAND Flash interface
- *  +- SEMI Shared Memory interface
- *  +- ISP Image Signal Processor (U335 only)
- *  +- CDS (U335 only)
- *  +- DMA Direct Memory Access Controller
- *  +- AAIF APP/ACC Interface (Mobile Scalable Link, MSL)
- *  +- APEX
- *  +- VIDEO_ENC AVE2/3 Video Encoder
- *  +- XGAM Graphics Accelerator Controller
- *  +- AHB
- *  |
- *  +- ahb:0 AHB Bridge
- *  |  |
- *  |  +- ahb:1 INTCON Interrupt controller
- *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
- *  |  +- ahb:4 EMIF   External Memory interface
- *  |
- *  +- fast:0 FAST bridge
- *  |  |
- *  |  +- fast:1 MMCSD MMC/SD card reader controller
- *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
- *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
- *  |  +- fast:4 I2C0  I2C channel 0 controller
- *  |  +- fast:5 I2C1  I2C channel 1 controller
- *  |  +- fast:6 SPI   SPI controller
- *  |  +- fast:7 UART1 Secondary UART (U335 only)
- *  |
- *  +- slow:0 SLOW bridge
- *     |
- *     +- slow:1 SYSCON (not possible to control)
- *     +- slow:2 WDOG Watchdog
- *     +- slow:3 UART0 primary UART
- *     +- slow:4 TIMER_APP Application timer - used in Linux
- *     +- slow:5 KEYPAD controller
- *     +- slow:6 GPIO controller
- *     +- slow:7 RTC controller
- *     +- slow:8 BT Bus Tracer (not used currently)
- *     +- slow:9 EH Event Handler (not used currently)
- *     +- slow:a TIMER_ACC Access style timer (not used currently)
- *     +- slow:b PPM (U335 only, what is that?)
- */
-
-/* Global syscon virtual base */
-static void __iomem *syscon_vbase;
-
-/**
- * struct clk_syscon - U300 syscon clock
- * @hw: corresponding clock hardware entry
- * @hw_ctrld: whether this clock is hardware controlled (for refcount etc)
- *	and does not need any magic pokes to be enabled/disabled
- * @reset: state holder, whether this block's reset line is asserted or not
- * @res_reg: reset line enable/disable flag register
- * @res_bit: bit for resetting or taking this consumer out of reset
- * @en_reg: clock line enable/disable flag register
- * @en_bit: bit for enabling/disabling this consumer clock line
- * @clk_val: magic value to poke in the register to enable/disable
- *	this one clock
- */
-struct clk_syscon {
-	struct clk_hw hw;
-	bool hw_ctrld;
-	bool reset;
-	void __iomem *res_reg;
-	u8 res_bit;
-	void __iomem *en_reg;
-	u8 en_bit;
-	u16 clk_val;
-};
-
-#define to_syscon(_hw) container_of(_hw, struct clk_syscon, hw)
-
-static DEFINE_SPINLOCK(syscon_resetreg_lock);
-
-/*
- * Reset control functions. We remember if a block has been
- * taken out of reset and don't remove the reset assertion again
- * and vice versa. Currently we only remove resets so the
- * enablement function is defined out.
- */
-static void syscon_block_reset_enable(struct clk_syscon *sclk)
-{
-	unsigned long iflags;
-	u16 val;
-
-	/* Not all blocks support resetting */
-	if (!sclk->res_reg)
-		return;
-	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
-	val = readw(sclk->res_reg);
-	val |= BIT(sclk->res_bit);
-	writew(val, sclk->res_reg);
-	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
-	sclk->reset = true;
-}
-
-static void syscon_block_reset_disable(struct clk_syscon *sclk)
-{
-	unsigned long iflags;
-	u16 val;
-
-	/* Not all blocks support resetting */
-	if (!sclk->res_reg)
-		return;
-	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
-	val = readw(sclk->res_reg);
-	val &= ~BIT(sclk->res_bit);
-	writew(val, sclk->res_reg);
-	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
-	sclk->reset = false;
-}
-
-static int syscon_clk_prepare(struct clk_hw *hw)
-{
-	struct clk_syscon *sclk = to_syscon(hw);
-
-	/* If the block is in reset, bring it out */
-	if (sclk->reset)
-		syscon_block_reset_disable(sclk);
-	return 0;
-}
-
-static void syscon_clk_unprepare(struct clk_hw *hw)
-{
-	struct clk_syscon *sclk = to_syscon(hw);
-
-	/* Please don't force the console into reset */
-	if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
-		return;
-	/* When unpreparing, force block into reset */
-	if (!sclk->reset)
-		syscon_block_reset_enable(sclk);
-}
-
-static int syscon_clk_enable(struct clk_hw *hw)
-{
-	struct clk_syscon *sclk = to_syscon(hw);
-
-	/* Don't touch the hardware controlled clocks */
-	if (sclk->hw_ctrld)
-		return 0;
-	/* These cannot be controlled */
-	if (sclk->clk_val == 0xFFFFU)
-		return 0;
-
-	writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCER);
-	return 0;
-}
-
-static void syscon_clk_disable(struct clk_hw *hw)
-{
-	struct clk_syscon *sclk = to_syscon(hw);
-
-	/* Don't touch the hardware controlled clocks */
-	if (sclk->hw_ctrld)
-		return;
-	if (sclk->clk_val == 0xFFFFU)
-		return;
-	/* Please don't disable the console port */
-	if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN)
-		return;
-
-	writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCDR);
-}
-
-static int syscon_clk_is_enabled(struct clk_hw *hw)
-{
-	struct clk_syscon *sclk = to_syscon(hw);
-	u16 val;
-
-	/* If no enable register defined, it's always-on */
-	if (!sclk->en_reg)
-		return 1;
-
-	val = readw(sclk->en_reg);
-	val &= BIT(sclk->en_bit);
-
-	return val ? 1 : 0;
-}
-
-static u16 syscon_get_perf(void)
-{
-	u16 val;
-
-	val = readw(syscon_vbase + U300_SYSCON_CCR);
-	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	return val;
-}
-
-static unsigned long
-syscon_clk_recalc_rate(struct clk_hw *hw,
-		       unsigned long parent_rate)
-{
-	struct clk_syscon *sclk = to_syscon(hw);
-	u16 perf = syscon_get_perf();
-
-	switch (sclk->clk_val) {