diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_display.c | 512 |
1 files changed, 0 insertions, 512 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index e9e8a5233b98..ef29065ea72e 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -113,10 +113,6 @@ static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state); static void ilk_set_pipeconf(const struct intel_crtc_state *crtc_state); static void hsw_set_pipeconf(const struct intel_crtc_state *crtc_state); static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state); -static void vlv_prepare_pll(struct intel_crtc *crtc, - const struct intel_crtc_state *pipe_config); -static void chv_prepare_pll(struct intel_crtc *crtc, - const struct intel_crtc_state *pipe_config); static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state); static void intel_modeset_setup_hw_state(struct drm_device *dev, struct drm_modeset_acquire_ctx *ctx); @@ -569,224 +565,6 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, assert_pch_hdmi_disabled(dev_priv, pipe, PORT_D, PCH_HDMID); } -static void _vlv_enable_pll(struct intel_crtc *crtc, - const struct intel_crtc_state *pipe_config) -{ - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); - enum pipe pipe = crtc->pipe; - - intel_de_write(dev_priv, DPLL(pipe), pipe_config->dpll_hw_state.dpll); - intel_de_posting_read(dev_priv, DPLL(pipe)); - udelay(150); - - if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1)) - drm_err(&dev_priv->drm, "DPLL %d failed to lock\n", pipe); -} - -static void vlv_enable_pll(struct intel_crtc *crtc, - const struct intel_crtc_state *pipe_config) -{ - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); - enum pipe pipe = crtc->pipe; - - assert_pipe_disabled(dev_priv, pipe_config->cpu_transcoder); - - /* PLL is protected by panel, make sure we can write it */ - assert_panel_unlocked(dev_priv, pipe); - - if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) - _vlv_enable_pll(crtc, pipe_config); - - intel_de_write(dev_priv, DPLL_MD(pipe), - pipe_config->dpll_hw_state.dpll_md); - intel_de_posting_read(dev_priv, DPLL_MD(pipe)); -} - - -static void _chv_enable_pll(struct intel_crtc *crtc, - const struct intel_crtc_state *pipe_config) -{ - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); - enum pipe pipe = crtc->pipe; - enum dpio_channel port = vlv_pipe_to_channel(pipe); - u32 tmp; - - vlv_dpio_get(dev_priv); - - /* Enable back the 10bit clock to display controller */ - tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)); - tmp |= DPIO_DCLKP_EN; - vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp); - - vlv_dpio_put(dev_priv); - - /* - * Need to wait > 100ns between dclkp clock enable bit and PLL enable. - */ - udelay(1); - - /* Enable PLL */ - intel_de_write(dev_priv, DPLL(pipe), pipe_config->dpll_hw_state.dpll); - - /* Check PLL is locked */ - if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1)) - drm_err(&dev_priv->drm, "PLL %d failed to lock\n", pipe); -} - -static void chv_enable_pll(struct intel_crtc *crtc, - const struct intel_crtc_state *pipe_config) -{ - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); - enum pipe pipe = crtc->pipe; - - assert_pipe_disabled(dev_priv, pipe_config->cpu_transcoder); - - /* PLL is protected by panel, make sure we can write it */ - assert_panel_unlocked(dev_priv, pipe); - - if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) - _chv_enable_pll(crtc, pipe_config); - - if (pipe != PIPE_A) { - /* - * WaPixelRepeatModeFixForC0:chv - * - * DPLLCMD is AWOL. Use chicken bits to propagate - * the value from DPLLBMD to either pipe B or C. - */ - intel_de_write(dev_priv, CBR4_VLV, CBR_DPLLBMD_PIPE(pipe)); - intel_de_write(dev_priv, DPLL_MD(PIPE_B), - pipe_config->dpll_hw_state.dpll_md); - intel_de_write(dev_priv, CBR4_VLV, 0); - dev_priv->chv_dpll_md[pipe] = pipe_config->dpll_hw_state.dpll_md; - - /* - * DPLLB VGA mode also seems to cause problems. - * We should always have it disabled. - */ - drm_WARN_ON(&dev_priv->drm, - (intel_de_read(dev_priv, DPLL(PIPE_B)) & - DPLL_VGA_MODE_DIS) == 0); - } else { - intel_de_write(dev_priv, DPLL_MD(pipe), - pipe_config->dpll_hw_state.dpll_md); - intel_de_posting_read(dev_priv, DPLL_MD(pipe)); - } -} - -static bool i9xx_has_pps(struct drm_i915_private *dev_priv) -{ - if (IS_I830(dev_priv)) - return false; - - return IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv); -} - -static void i9xx_enable_pll(struct intel_crtc *crtc, - const struct intel_crtc_state *crtc_state) -{ - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); - i915_reg_t reg = DPLL(crtc->pipe); - u32 dpll = crtc_state->dpll_hw_state.dpll; - int i; - - assert_pipe_disabled(dev_priv, crtc_state->cpu_transcoder); - - /* PLL is protected by panel, make sure we can write it */ - if (i9xx_has_pps(dev_priv)) - assert_panel_unlocked(dev_priv, crtc->pipe); - - /* - * Apparently we need to have VGA mode enabled prior to changing - * the P1/P2 dividers. Otherwise the DPLL will keep using the old - * dividers, even though the register value does change. - */ - intel_de_write(dev_priv, reg, dpll & ~DPLL_VGA_MODE_DIS); - intel_de_write(dev_priv, reg, dpll); - - /* Wait for the clocks to stabilize. */ - intel_de_posting_read(dev_priv, reg); - udelay(150); - - if (INTEL_GEN(dev_priv) >= 4) { - intel_de_write(dev_priv, DPLL_MD(crtc->pipe), - crtc_state->dpll_hw_state.dpll_md); - } else { - /* The pixel multiplier can only be updated once the - * DPLL is enabled and the clocks are stable. - * - * So write it again. - */ - intel_de_write(dev_priv, reg, dpll); - } - - /* We do this three times for luck */ - for (i = 0; i < 3; i++) { - intel_de_write(dev_priv, reg, dpll); - intel_de_posting_read(dev_priv, reg); - udelay(150); /* wait for warmup */ - } -} - -static void i9xx_disable_pll(const struct intel_crtc_state *crtc_state) -{ - struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); - enum pipe pipe = crtc->pipe; - - /* Don't disable pipe or pipe PLLs if needed */ - if (IS_I830(dev_priv)) - return; - - /* Make sure the pipe isn't still relying on us */ - assert_pipe_disabled(dev_priv, crtc_state->cpu_transcoder); - - intel_de_write(dev_priv, DPLL(pipe), DPLL_VGA_MODE_DIS); - intel_de_posting_read(dev_priv, DPLL(pipe)); -} - -static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) -{ - u32 val; - - /* Make sure the pipe isn't still relying on us */ - assert_pipe_disabled(dev_priv, (enum transcoder)pipe); - - val = DPLL_INTEGRATED_REF_CLK_VLV | - DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; - if (pipe != PIPE_A) - val |= DPLL_INTEGRATED_CRI_CLK_VLV; - - intel_de_write(dev_priv, DPLL(pipe), val); - intel_de_posting_read(dev_priv, DPLL(pipe)); -} - -static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) -{ - enum dpio_channel port = vlv_pipe_to_channel(pipe); - u32 val; - - /* Make sure the pipe isn't still relying on us */ - assert_pipe_disabled(dev_priv, (enum transcoder)pipe); - - val = DPLL_SSC_REF_CLK_CHV | - DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS; - if (pipe != PIPE_A) - val |= DPLL_INTEGRATED_CRI_CLK_VLV; - - intel_de_write(dev_priv, DPLL(pipe), val); - intel_de_posting_read(dev_priv, DPLL(pipe)); - - vlv_dpio_get(dev_priv); - - /* Disable 10bit clock to display controller */ - val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)); - val &= ~DPIO_DCLKP_EN; - vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val); - - vlv_dpio_put(dev_priv); -} - void vlv_wait_port_ready(struct drm_i915_private *dev_priv, struct intel_digital_port *dig_port, unsigned int expected_mask) @@ -5774,35 +5552,6 @@ static void intel_panel_sanitize_ssc(struct drm_i915_private *dev_priv) } } -static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe - pipe) -{ - u32 reg_val; - - /* - * PLLB opamp always calibrates to max value of 0x3f, force enable it - * and set it to a reasonable value instead. - */ - reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1)); - reg_val &= 0xffffff00; - reg_val |= 0x00000030; - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val); - - reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13); - reg_val &= 0x00ffffff; - reg_val |= 0x8c000000; - vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val); - - reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1)); - reg_val &= 0xffffff00; - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val); - - reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13); - reg_val &= 0x00ffffff; - reg_val |= 0xb0000000; - vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val); -} - static void intel_pch_transcoder_set_m_n(const struct intel_crtc_state *crtc_state, const struct intel_link_m_n *m_n) { @@ -5898,267 +5647,6 @@ void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state, enum link_m_n_s intel_cpu_transcoder_set_m_n(crtc_state, dp_m_n, dp_m2_n2); } -static void vlv_prepare_pll(struct intel_crtc *crtc, - const struct intel_crtc_state *pipe_config) -{ - struct drm_device *dev = crtc->base.dev; - struct drm_i915_private *dev_priv = to_i915(dev); - enum pipe pipe = crtc->pipe; - u32 mdiv; - u32 bestn, bestm1, bestm2, bestp1, bestp2; - u32 coreclk, reg_val; - - /* Enable Refclk */ - intel_de_write(dev_priv, DPLL(pipe), - pipe_config->dpll_hw_state.dpll & ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV)); - - /* No need to actually set up the DPLL with DSI */ - if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0) - return; - - vlv_dpio_get(dev_priv); - - bestn = pipe_config->dpll.n; - bestm1 = pipe_config->dpll.m1; - bestm2 = pipe_config->dpll.m2; - bestp1 = pipe_config->dpll.p1; - bestp2 = pipe_config->dpll.p2; - - /* See eDP HDMI DPIO driver vbios notes doc */ - - /* PLL B needs special handling */ - if (pipe == PIPE_B) - vlv_pllb_recal_opamp(dev_priv, pipe); - - /* Set up Tx target for periodic Rcomp update */ - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f); - - /* Disable target IRef on PLL */ - reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe)); - reg_val &= 0x00ffffff; - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val); - - /* Disable fast lock */ - vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610); - - /* Set idtafcrecal before PLL is enabled */ - mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK)); - mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT)); - mdiv |= ((bestn << DPIO_N_SHIFT)); - mdiv |= (1 << DPIO_K_SHIFT); - - /* - * Post divider depends on pixel clock rate, DAC vs digital (and LVDS, - * but we don't support that). - * Note: don't use the DAC post divider as it seems unstable. - */ - mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT); - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv); - - mdiv |= DPIO_ENABLE_CALIBRATION; - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv); - - /* Set HBR and RBR LPF coefficients */ - if (pipe_config->port_clock == 162000 || - intel_crtc_has_type(pipe_config, INTEL_OUTPUT_ANALOG) || - intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI)) - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe), - 0x009f0003); - else - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe), - 0x00d0000f); - - if (intel_crtc_has_dp_encoder(pipe_config)) { - /* Use SSC source */ - if (pipe == PIPE_A) - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), - 0x0df40000); - else - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), - 0x0df70000); - } else { /* HDMI or VGA */ - /* Use bend source */ - if (pipe == PIPE_A) - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), - 0x0df70000); - else - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), - 0x0df40000); - } - - coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe)); - coreclk = (coreclk & 0x0000ff00) | 0x01c00000; - if (intel_crtc_has_dp_encoder(pipe_config)) - coreclk |= 0x01000000; - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk); - - vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000); - - vlv_dpio_put(dev_priv); -} - -static void chv_prepare_pll(struct intel_crtc *crtc, - const struct intel_crtc_state *pipe_config) -{ - struct drm_device *dev = crtc->base.dev; - struct drm_i915_private *dev_priv = to_i915(dev); - enum pipe pipe = crtc->pipe; - enum dpio_channel port = vlv_pipe_to_channel(pipe); - u32 loopfilter, tribuf_calcntr; - u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac; - u32 dpio_val; - int vco; - - /* Enable Refclk and SSC */ - intel_de_write(dev_priv, DPLL(pipe), - pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE); - - /* No need to actually set up the DPLL with DSI */ - if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0) - return; - - bestn = pipe_config->dpll.n; - bestm2_frac = pipe_config->dpll.m2 & 0x3fffff; - bestm1 = pipe_config->dpll.m1; - bestm2 = pipe_config->dpll.m2 >> 22; - bestp1 = pipe_config->dpll.p1; - bestp2 = pipe_config->dpll.p2; - vco = pipe_config->dpll.vco; - dpio_val = 0; - loopfilter = 0; - - vlv_dpio_get(dev_priv); - - /* p1 and p2 divider */ - vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port), - 5 << DPIO_CHV_S1_DIV_SHIFT | - bestp1 << DPIO_CHV_P1_DIV_SHIFT | - bestp2 << DPIO_CHV_P2_DIV_SHIFT | - 1 << DPIO_CHV_K_DIV_SHIFT); - - /* Feedback post-divider - m2 */ - vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2); - - /* Feedback refclk divider - n and m1 */ - vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port), - DPIO_CHV_M1_DIV_BY_2 | - 1 << DPIO_CHV_N_DIV_SHIFT); - - /* M2 fraction division */ - vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac); - - /* M2 fraction division enable */ - dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port)); - dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN); - dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT); - if (bestm2_frac) - dpio_val |= DPIO_CHV_FRAC_DIV_EN; - vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val); - - /* Program digital lock detect threshold */ - dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port)); - dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK | - DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE); - dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT); - if (!bestm2_frac) - dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE; - vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val); - - /* Loop filter */ - if (vco == 5400000) { - loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT); - loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT); - loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT); - tribuf_calcntr = 0x9; - } else if (vco <= 6200000) { - loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT); - loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT); - loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT); - tribuf_calcntr = 0x9; - } else if (vco <= 6480000) { - loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT); - loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT); - loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT); - tribuf_calcntr = 0x8; - } else { - /* Not supported. Apply the same limits as in the max case */ - loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT); - loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT); - loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT); - tribuf_calcntr = 0; - } - vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter); - - dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port)); - dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK; - dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT); - vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val); - - /* AFC Recal */ - vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), - vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) | - DPIO_AFC_RECAL); - - vlv_dpio_put(dev_priv); -} - -/** - * vlv_force_pll_on - forcibly enable just the PLL - * @dev_priv: i915 private structure - * @pipe: pipe PLL to enable - * @dpll: PLL configuration - * - * Enable the PLL for @pipe using the supplied @dpll config. To be used - * in cases where we need the PLL enabled even when @pipe is not going to - * be enabled. - */ -int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe, - const struct dpll *dpll) -{ - struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); - struct intel_crtc_state *pipe_config; - - pipe_config = intel_crtc_state_alloc(crtc); - if (!pipe_config) - return -ENOMEM; - - pipe_config->cpu_transcoder = (enum transcoder)pipe; - pipe_config->pixel_multiplier = 1; - pipe_config->dpll = *dpll; - - if (IS_CHERRYVIEW(dev_priv)) { - chv_compute_dpll(crtc, pipe_config); - chv_prepare_pll(crtc, pipe_config); - chv_enable_pll(crtc, pipe_config); - } else { - vlv_compute_dpll(crtc, pipe_config); - vlv_prepare_pll(crtc, pipe_config); - vlv_enable_pll(crtc, pipe_config); - } - - kfree(pipe_config); - - return 0; -} - -/** - * vlv_force_pll_off - forcibly disable just the PLL - * @dev_priv: i915 private structure - * @pipe: pipe PLL to disable - * - * Disable the PLL for @pipe. To be used in cases where we need - * the PLL enabled even when @pipe is not going to be enabled. - */ -void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe) -{ - if (IS_CHERRYVIEW(dev_priv)) - chv_disable_pll(dev_priv, pipe); - else - vlv_disable_pll(dev_priv, pipe); -} - - - static void intel_set_transcoder_timings(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |